Virtue Ion

My ion Paintball Gun is leaking from the bottom of the solenoid. Under new board just installed. PLZ HELP?

the small hole at the bottom is located the solenoid is leaking air. I do not know what to do. I just installed a new gasket virtue. plz help the first response I got was 100% wrong. can add more Blackheart Board an ion. its not new. I have had for over a year. I have a crazy fall interest. Asa Off. Bob Long reg. 360 QEV, Orange Unicorn micro pin w / ends up. rotating magnetic trigger, Q-Lock, in the membrane off to the trigger, blue eyes, leisure break, and 14 "All American barrel. I know what I'm doing and I have not put a hand on my gun would not work. all is well and i put 3 cases of paint through the gun with Virtue Board. Only I need to get that leak fixed. thanks plz only answer if you know what you're talking .. This problem has nothing to do with the rings or ..

Has solenoid assembly taken apart? NO O-rings there that you may have overlooked. Furthermore, it is necessary to remove the cover and inspect solenoid reinforcement to ensure that there is no scratch on the bottom of the rubber bumpers, as well as in the case of the solenoid itself. if no scratch, Clean all the solenoid assembly and reassemble. if there are scratches that may need a new armor, housing, or both. you may need to get a new solenoid completely. none of the updates that are listed have nothing to do with the leak.

Virtue Ion xe paintball

Be Sociable, Share!

•