Why does my goldfish poop as the black?

This has been happening for about a week, have little appetite, but I tried peas and feed them do not seem concerned, only these long wires trailing feces everywhere, my tank is starting to resemble a spider has moved in Any ideas please?

Something is wrong with your fish are stressed for any reason and by not eating well. Do you have other signs of the disease? How big is the tank? Do you have a filter and how often you do water changes? Something might be wrong with the water or could have an infection bacteria. If water is treated very well with a drug against bacteria.

My Bikini Bottom reef tank at REEFPARK.NET 23/07/2010

Air Venturi Thread Converter + Hose $29.99 Hose + adapter for AirForce Airguns scuba tank & hand pump One end has 1/4 BSPP male threads to fit the female threads of the AirForce scuba tank adapter or AirForce hand pump The other end has 1/8 BSPP female threads & fits the hose with 1/8 BSPP male threads Hose ends in 1/8 BSPP female thread for use with 1/8 BSPP filling adapters or our female quick-disconnect coupling Includes flexible hose & 2 O-rings (wide rubber O-ring is used with AirForce 3-stage hand pump; bonded metal O-ring is used with AirForce scuba tank adapter)

AirForce Condor CO2, 20-oz. CO2 tank, Scoped $815.94 1,000+ shots on one CO2 tank!

AirForce Condor CO2, 12-oz. CO2 tank, Scoped $809.94 1,000+ shots on one CO2 tank!

Creedmoor Sports K Valve to 200 DIN Valve Adapter $59.98 K valve to 200 DIN valve adapter If your fill hose has a male 200 DIN thread connection and your scuba tank has a K valve, you’ll need this adapter.

Leisure Pro Scuba Tank Accessory Kit $47.99 Accessory kit for Leisure Pro 80 cu ft scuba tank Includes black tank boot, yellow tank cover & yellow K-valve protector

AirForce Condor CO2, Incl adapter, 12-oz. CO2 tank $713.94 1,000+ shots on one CO2 tank!

AirForce Talon CO2, 12-oz. CO2 tank, 3-9×40 Scope $755.94 1,000+ shots on one CO2 tank!

AirForce Condor CO2, Incl adapter, 20-oz. CO2 tank $719.94 1,000+ shots on one CO2 tank!

AirForce Talon SS CO2, 12-oz. CO2 Tank, Scoped $755.94 1,000+ shots on one CO2 tank!

AirForce Talon SS CO2, 20-oz. CO2 Tank, Scoped $755.94 1,000+ shots on one CO2 tank!

AirForce Talon SS CO2, Adapter & 20-oz. CO2 Tank $599.94 1,000+ shots on one CO2 tank!

AirForce Talon CO2, 20-oz. CO2 tank, 3-9×40 Scope $763.14 1,000+ shots on one CO2 tank!

AirForce Talon CO2, Incl adapter, 12-oz. CO2 tank $563.94 1,000+ shots on one CO2 tank!

AirForce Talon CO2, Incl adapter, 20-oz. CO2 tank $571.14 1,000+ shots on one CO2 tank!

AirForce Talon SS CO2, Adapter, 12-oz. CO2 Tank $593.93 1,000+ shots on one CO2 tank!

Blue #242 Thread-Locker $19.5 Medium strength, 1700 psi. Blue color is best for scope mounting and most gunsmithing applications. Fills fine threads without binding. Locks threaded fasteners against vibration loosening. Prevents leaks and rusting of threads. Bond can be broken loose without heat. Parts disassemble with hand tools. Ideal for fasteners 1/4" to 3/4". Degrease parts thoroughly before using. 6ml tube.

Dewey Bore Mop, 5/40 Thread, Brass Core, .20-.22 Cal $5.99 Rifle bore mop Fits .20 to .22 cal Brass core 5/40 thread

CO2 Tank, 12-oz., Refillable $23.99 CO2 tank 12 oz. Refillable Durable aluminum construction Pin-valve assembly included 2.5" diameter 10" total length

Air Arms MPR Air Tank, Built-in Gauge $171.52 MPR air tank Built-in air pressure gauge (manometer)

AirForce Micro-Meter Tank $217.8 Micro-meter tank Fits all AirForce rifles Delivers up to 100 shots Shoots at a reduced velocity (600 fps) Includes metal buttplate Ideal for low to mid-level velocities Perfect for indoor shooting! Delivers consistent shots that are naturally quieter due to lower velocities

AirForce Extra Air Tank, Air or Nitrogen, Fits Talon & Talon SS $217.8 There’s nothing like an extra tank for air or nitrogen to keep the shooting fun going! Air tank includes metal buttplate.

CO2 Tank, 20 oz., Refillable $31.19 CO2 tank 20 oz. Refillable Durable aluminum construction Pin-valve assembly included 3.25" diameter 10.58" total length

Air Arms Air Tank, Fits S200/T200 Air Rifles with Removable Tanks $143.94 Air tank Fits Air Arms S200/T200 air rifles with removable tanks If your Air Arms S200/T200 air rifle has a removable tank, this extra tank will be real convenient. Instead of carrying a pump or scuba tank plus the fill adapters, just fill up another tank and take it with you.

IZH Drozd Adapter, 1/2"x28TPI, Thread Protector $30.58 The Drozd is one of the most exciting BB guns to hit the market in a long time! If you’re lucky enough to have one and want to mount an accessory that is threaded 1/2"x28TPI, such as our unrestricted fake suppressor, then this is the part you need. To ensure exact thread alignment, the threaded adapters are CNC-machined to precision tolerances from a solid steel rod in one lathe operation. They are hot salt blued to match the gun. The included steel thread protector covers the threads on your barrel when no accessory is mounted. Easy installation in place of the existing barrel nut. No tools or modifications are required. Adapter assembly includes one adapter and one knurled thread protector. This is the way the gun should have come from the manufacturer! Give your Drozd a tactical look… order a threaded adapter today!

Air Venturi HP4500 Replacement Valve, Fits Carbon Fiber Tank $179.99 Replacement valve for Air Venturi AV-4500HPT, a carbon fiber tank.

CO2 Tank, Filled, 12 oz., Refillable $29.99 CO2 tank (filled with CO2 by Pyramyd Air) 12 oz. Refillable Durable aluminum construction Pin-valve assembly included 2.5" diameter 10" total length

CO2 Tank, Filled, 20 oz., Refillable $35.99 CO2 tank (filled with CO2 by Pyramyd Air) 20 oz. Refillable Durable aluminum construction Pin-valve assembly included 3.25" diameter 10.58" total length

Quick-Disconnect Male Fitting + O-Ring $23.99 Male quick-disconnect fitting with o-ring Converts Sam Yang, Sumatra & Career rifles to connect to the Benjamin 3-stage hand pump Connects to female quick-disconnect (Quickadap1EM1B), which has 1/8 BSPP threads & fits most scuba tank & hand pump adapter hoses Installation instructions: To start the old fill port turning, insert the round shaft of a phillips screwdriver into the fill port hole and turn the port counterclockwise. Once the port loosens, you can take it off by hand the rest of the way. After you’ve unscrewed your old fill port from the end of your tank, thread in this quick-disconnect fitting & o-ring (included) to seal the connection. No need to depressurize the tank because the tank has a check valve.

AirForce Spin-Loc Air Tank, Fits TalonP Air Pistols $188.1 Spin-Loc air tank Connects to an AirForce TalonP pistol without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings 6.125" long Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

Benjamin Air Tank, 2000 psi Output $191.99 Benjamin air tank Designed for high-pressure air up to 3000 psi Regulated to 2000 psi output (specifically for the Benjamin Discovery & Marauder and the Crosman Challenger) 72 cubic inches Fills a 2000 psi rifle 6 to 8 times from one tankful To fill the Discovery, Marauder or Challenger, you’ll also need FAH002 (Dual Fuel adapter) Do not use this tank with paintball guns Includes male quick-disconnect coupling (can be filled with the Benjamin hand pump) 4.5" outside dia., 11.5" long, 4.40 lbs.

Hammerli Pneuma Extra Air Tank, Also Fits HaleStorm & AT44PA Rifles $131.99 Don’t carry a scuba tank or pump when you go hunting or plinking! Carry an extra tank that you filled up at home! It’s lighter than fill devices and will let you keep shooting instead of filling. Fits the Hammerli Pneuma, Air Venturi HaleStorm and Hatsan AT44PA air rifles.

Air Venturi Scuba Tank Adapter & Hose Assembly, Female Connector, Gauge $93.54 Scuba tank adapter Includes hose with female connector Fits both tall- and short-necked scuba tanks K-valve only (does not fit DIN valves Includes gauge Connect your scuba tank to your PCP air rifles and air pistols and fill ‘er up!

Crosman AirSource, pre-filled, disposable, 88 gram CO2 tank $10.74 AirSource, the new, pre-filled, disposable, 88 gram (3.1 oz) CO2 tank has now been designed into a series of Crosman air rifles. AirSource not only allows more shots, up to 400 on one tank, but the accuracy and consistency is greater because of the larger reservoir of CO2.

Benjamin CO2 & Air FIll Adapter, Fits Benjamin Air Tank or Standard Paintball CO2 Tank $83.99 Made specifically for the Dual Fuel capability of the Benjamin Discovery & Marauder and the Crosman Challenger. Includes: CGA-320 fitting for Benjamin carbon fiber tank or a standard paintball CO2 tank Fitting is .825×14 (standard paintball CO2 connector size) 7" stainless steel braided hose (12" overall length) Patented bleeder valve Female Foster quick-disconnect fitting

AirForce Quick-Detach Air Tank, Fits TalonP Air Pistols $159.6 Quick-detach air tank Fits TalonP air pistols Can be used with compressed air or dry nitrogen gas only 6.125" long Need some extra air? Don’t carry refill equipment! Get a spare tank, fill it up at home & take it with you. Simply swap the filled tank for the empty one, and you’re good to go.

Propane Adapter for Airsoft Green Gas Guns $22.74 The TSD Sapien Arms Ver2 Aluminum Propane Adaptor is an excellent, user friendly alternative for gas-powered airsoft products. This trendsetting adaptor features a thread-on cap with loop, silicone oil reservoir, and a texturized body for easy grip feel. The adaptor does not need to be to be detached from the propane tank to apply silicone oil. For airsoft use only. Light silicone oil not included. Users MUST use silicone oil with this product!

TSD Sapien Arms Ver2 Aluminum Propane Adapter, Blue $27 The TSD Sapien Arms Ver2 Aluminum Propane Adapter is an excellent, user friendly alternative for gas-powered airsoft products. This trendsetting adapter features a thread-on cap with loop, silicon oil reservoir, and a texturized body for easy grip feel. The adapter does not need to be to be detached from the propane tank to apply silicon oil. For airsoft use only. Light silicon oil not included. Users MUST use silicon oil with this product.

TSD Sapien Arms Ver2 Aluminum Propane Adapter, Red $27 The TSD Sapien Arms Ver2 Aluminum Propane Adapter is an excellent, user friendly alternative for gas-powered airsoft products. This trendsetting adapter features a thread-on cap with loop, silicon oil reservoir, and a texturized body for easy grip feel. The adapter does not need to be to be detached from the propane tank to apply silicon oil. For airsoft use only. Light silicon oil not included. Users MUST use silicon oil with this product.

TSD Sapien Arms Ver. 2 Aluminum Propane Adapter, Green $27 The TSD Sapien Arms Ver2 Aluminum Propane Adapter is an excellent, user friendly alternative for gas-powered airsoft products. This trendsetting adapter features a thread-on cap with loop, silicon oil reservoir, and a texturized body for easy grip feel. The adapter does not need to be to be detached from the propane tank to apply silicon oil. For airsoft use only. Light silicon oil not included. Users MUST use silicon oil with this product.

Airforce Edge Spare Tank & Buttstock Assembly, Fits Airforce Edge Air Rifles $204.3 Airforce Edge tank & buttstock assembly Fits Airforce Edge air rifles The Edge Spare Tank with Buttstock assembly provides complete back up for the big match or an extended shooting session.

AirForce Spin-Loc Hi-Flo Air Tank, Fits .177 AirForce Condor Rifles $270 Spin-Loc Hi-Flo air tank Connects to .177-caliber* AirForce Condor rifles without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted** to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *The Condor’s Hi-Flo tank is caliber-specific. **To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

AirForce CO2 Adapter with Filled 12-oz. CO2 tank, fits Condor, Talon & Talon SS $143.94 Includes CO2 adapter & filled 12-oz. CO2 tank Fits AirForce Condor, Talon & Talon SS guns Over 1,000 shots per CO2 tank Ideal for shooting indoors Easy to switch back to air No handpump or scuba tank required Quieter operation Ground shipping only How to switch from high-pressure air to CO2: Unscrew your AirForce air tank from your rifle Screw in your CO2 adapter into your rifle Screw in the filled tank into the other end of the adapter Start shooting! When this tank is empty or down to a low level, fill up with more CO2 from a larger bulk-fill tank. This filled tank can be sent only by ground…no air shipping allowed!

Airforce Edge Extra Air Tank, Fits Airforce Edge Air Rifles $164.34 Airforce Edge air tank Fits Airforce Edge air rifles Easily, quickly swap tanks on your Edge by loosening one screw in the buttstock assembly.

AirForce Spin-Loc Standard Air Tank, Fits AirForce Talon & Talon SS Rifles $246.6 Spin-Loc standard air tank Connects to an AirForce Talon/Talon SS rifle without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

AirForce Spin-Loc Micro-Meter Air Tank, Fits AirForce Sporting Rifles $246.6 Spin-Loc Micro-Meter air tank Connects to an AirForce Talon/Talon SS or Condor rifle without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings 10.875" long Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

AirForce CO2 Adapter with Filled 20-oz. CO2 Tank, Fits Condor, Talon & Talon SS $151.19 Includes CO2 adapter & filled 20-oz. CO2 tank Fits AirForce Condor, Talon & Talon SS guns Over 1,000 shots per CO2 tank Ideal for shooting indoors Easy to switch back to air No handpump or scuba tank required Quieter operation Ground shipping only How to switch from high-pressure air to CO2: Unscrew your AirForce air tank from your rifle Screw in your CO2 adapter into your rifle Screw in the filled tank into the other end of the adapter Start shooting! Since this tank is filled with CO2, it has to be shipped via ground service. Start shooting when this arrives, and refill it from a bulk-fill CO2 tank.

Air Venturi Tank Adapter Assembly, 4500 psi, for High-Pressure SCBA Tanks $105 Tank adapter assembly Fits high-pressure scba (self-contained breathing apparatus) tank, including the Air Venturi carbon fiber tank 4500 psi Includes bleeder, hose and female quick-disconnect coupling Does not include a manometer (air pressure gauge) Fits the Air Venturi carbon fiber tank–AV-4500HPT [PY-A-350]. Inline manometer (air pressure gauge) sold separately–AV-00031 [PY-A-3865]. Suitable for connecting your high-pressure scba tank to a precharged pneumatic air rifle.

Carbon Fiber Tank, 4500 psi, 88 cu ft $839.99 DOT-approved Carbon fiber filament wound over aluminum bladder 88 cu ft 4500 psi max pressure 11.3 lbs dry weight Includes: Hose with 1/8" BSPP threads on both ends Seal washer Hose has an inline gauge (eliminates use of a yoke) Air Venturi female quick-disconnect adapter with 1/8" BSPP male threads on one end This is not a scuba tank. It’s a carbon fiber tank, which is also called an scba tank, and has a high-pressure scba valve…like the one firefighters use on their scba tanks. Many dive shops do not have the ability to fill these tanks. In some towns, the fire department has a compressor that can fill a high-pressure carbon fiber tank, as firefighters use smaller scba tanks for breathing equipment during rescues. You might want to approach your local fire department and ask if they would be willing to fill your high-pressure carbon fiber/scba tank from their compressor. Another alternative is to contact a local paintball store, as paintballers use carbon fiber tanks to fill their markers. If the only alternative you have is to fill your high-pressure carbon fiber scba tank at a dive shop, a 1/8" BSPP male to DIN female adapter (our part # AA-Z2128-300) can temporarily replace the hose on the valve adapter so the dive shop can fill your tank.

BSA R-10 PCP Air Rifle $1199.99 Compensator, Shrouded, Removable Tank

AirForce Extra Air Tank, Air or Nitrogen, Hi-Flo Valve, for Condors $241.8 There’s nothing like an extra reservoir for air or nitrogen to keep the shooting fun going! Air tank includes metal buttplate. Up to 15 shots at full power. 30 – 40 shots at low power settings. Use only with the AirForce Condor in .20, .22 or .25 caliber. Not recommended for .177 cal. Condors.

Leisure Pro Scuba Tank, K Valve, 80 cu ft, Aluminum, 3000 psi $299.99 Scuba tank K valve 80 cu ft Aluminum 3000 psi maximum pressure Shipped empty Yellow exterior color

AirForce Spin-Loc Hi-Flo Air Tank, Fits .20, .22 & .25 AirForce Condor Rifles $270 Spin-Loc Hi-Flo air tank Connects to AirForce Condor rifles without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank Does not fit .177-caliber guns. Use ONLY for .20-, .22- and .25-caliber Condors. The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

Air Venturi Scuba Tank Adapter $65.99 "Scuba Yoke" Fill Station

AirForce Scuba Tank Adapter K-valve, Steel Hose $102.6 AirForce Airguns scuba tank adapter K-valve Pressure gauge goes up to 3,000 psi Stainless steel mesh hose* Ends in a female quick-disconnect *While the hose is stainless steel mesh, it MAY also have a black plastic cover. Which one you get depends on what we have in stock.

AirForce Scuba Tank Adapter, DIN Connector, Steel Hose $102.6 AirForce Airguns scuba tank adapter DIN connector Pressure gauge goes up to 3,000 psi Stainless steel mesh hose* Ends in a female quick-disconnect *While the hose is stainless steel mesh, it MAY also have a black plastic cover. Which one you get depends on what we have in stock.

Benjamin Carbon Fiber Tank, 90 cu in, Gauge, Hose w/Female Quick-Disconnect $479.99 Benjamin carbon fiber tank 90 cu in capacity 4,500 psi max pressure 15" long 12" microbore hose with female quick-disconnect Built-in air pressure gauge (manometer) Bleed valve Restricted-flow manifold for controlled, precise filling Lightweight, easier to transport than a metal scuba tank 4.625"x14.625" 4.6 lbs. Have you resorted to carrying a steel or aluminum buddy bottle to refill your PCP air guns in the field? You’ll get even more refills from this carbon fiber tank since it’s 4,500 psi. Plus, it doesn’t weigh as much. Depending on the size of your airgun’s onboard reservoir, you could get up to 16 fills before you have to refill this tank.

Air Venturi Scuba Tank, 80 cu ft, Aluminum, Deluxe Valve, 3,000 psi, Black $239.99 Scuba tank K valve 80 cu ft Aluminum 3,000 psi maximum pressure (206 bar) Shipped empty Black Indicator shows if valve is open or closed If you shoot precharged pneumatic guns, you’ll need an air source. A scuba tank is a great way to store lots of air to pressurize all your guns.

Crosman AirSource, pre-filled, disposable, 88 gram CO2 tank, 25ct BULK $197.94 Bulk AirSource Tanks Buy bulk rate CO2 at PyramydAir! 25 Tanks are included in this offer. Ideal for shooting clubs. AirSource, the new, pre-filled, disposable, 88 gram (3.1 oz) CO2 tank has now been designed into a series of Crosman air rifles. AirSource not only allows more shots, up to 400 on one tank, but the accuracy and consistency is greater because of the larger reservoir of CO2.

IZH Drozd BB – Bulk CO2 $395.99 Refillable 12-oz. or 20-oz. CO2 tank

AirForce Extra Air Tank, Air or Nitrogen, Hi-Flo Valve, Use with .177 Cal Condor $241.8 There’s nothing like an extra reservoir for air or nitrogen to keep the shooting fun going! Air tank includes metal buttplate. Up to 15 shots at full power. 30 – 40 shots at low power settings. Use only with .177 caliber Condor

Sam Yang Recluse Dual Tank Air Rifle $839.94 .357, Precharged Pneumatic

Dragon Claw Dual Tank Air Rifle $839.94 .50 Cal., Precharged Pneumatic

Benjamin Carbon Fiber Tank, 54 cu ft, Gauge, Hose w/Female Quick-Disconnect $719.99 Benjamin carbon fiber tank 54 cu-ft capacity 4,500 psi max pressure 38" long 12" microbore hose with female quick-disconnect Built-in air pressure gauge (manometer) Bleed valve Restricted-flow manifold for controlled, precise filling Lightweight, easier to transport than a metal scuba tanks 4.625"x37" 15 lbs. This monster carbon fiber air tank will keep you in air for days, weeks…and probably months! Fill all your precharged pneumatic (PCP) air pistols and air rifles and shoot day and night. Depending on the size of your gun’s onboard reservoir, you’ll get up to 80 fills with this big boy.

Brownells Bronze Bore Brush, Rifle, .22 Cal $1.91 .22 cal. rifle bore brush Phosphor bronze Looped & wound steel shank 8-32 thread

JB Unicorn Barrel Extension, Fits AR AEG Rifles, 9.5" $57.54 Barrel extension 14mm counter clockwise thread 9.5" This 9.5" long profile barrel extension by JBU fits all airsoft rifles with 14mm counterclockwise thread. The barrel extension can be used with standard M4 length outer barrels. For airsoft use only.

Mad Bull Gemtech Blackside Barrel Extension, Black $47.88 Barrel extension 14mm counterclockwise thread Black The barrel extension fits on the outer barrel of the gun with a 14mm counterclockwise thread. The barrel extension is just for looks and will not actually suppress the sound/noise of your airsoft gun. For airsoft use only.

Mad Bull Gemtech Outback II Fake Silencer & Barrel Extension Tube $34.74 Fake silencer & barrel extension tube 14mm counterclockwise thread For airsoft use The fake silencer & barrel extension tube attaches to the outer barrel of your airsoft gun with a 14mm counterclockwise thread. For airsoft use only. ATTENTION: The fake silencer is just for looks and will not decrease the sound of your airsoft gun.

Mad Bull Whisper .45ACP Fake Barrel Extension, Black $34.74 Fake barrel extension Counterclockwise thread Black The fake barrel extension attaches the the outer barrel with a counterclockwise thread and extends your gun’s inner barrel. Pick one up for your next skirmish! For airsoft use only.

AirForce CO2 Adapter, Fits Condor, Talon & Talon SS $119.94 Fits all Condor, Talon and Talon SS rifles Over 1,000 shots per CO2 tank Ideal for shooting indoors Easy to switch back to air No handpump or scuba tank required Quieter operation How to switch from high-pressure air to CO2: Unscrew your AirForce air tank from your rifle Screw in the CO2 adapter into your rifle Screw in the filled tank into the other end of the adapter Start shooting!

CO2 Fill-Up $6 CO2 Fill-Up – gas. Please only add it to the shopping cart if you are purchasing a CO2 tank at the same time.

AirForce 1/4" male BSPP Adapter, For AirForce Guns $18.3 1/4" male BSPP adapter Connects your AirForce rifle to a scuba tank or hand pump

Brownells Cotton Bore Mop, .22 Cal, 3-Pack $9.59 .22 cal rifle bore mop 3-pack Fits .22 to .270 cal 2-7/8" long Steel shank, aluminum coupling 8-32 thread

Air Venturi Thumbhole Stock, Fits Older AirForce Rifles & Tanks $47.99 Thumbhole stock Fits older AirForce Airguns Condor, Talon & Talon SS rifles & tanks* Easily attaches to gun’s pistol grip & high-pressure air tank buttplate (does not fit CO2 tank) No machining required *Does not fit the newer AirForce guns or tanks with the Spin-Loc feature.

AirForce DIN Fill System, Fits AirForce Talon & Condor Rifles $78.6 AirForce Airguns DIN adapter Fits AirForce Talon & Condor airguns Fits any scuba tank with a DIN fitting If your scuba tank comes with a DIN fitting, get this and start filling your Talon and Condor PCP guns!

Crosman AirSource, pre-filled, disposable, two 88 gram CO2 tanks $19.19 AirSource, the new, pre-filled, disposable, 88 gram CO2 tank has now been designed into a series of Crosman air rifles. AirSource not only allows more shots, up to 400 on one tank, but the accuracy and consistency is greater because of the larger reservoir of CO2.

Air Arms Fill Adapter, Fits Air Arms Rifles w/Detachable Tanks $35.94 Fill adapter Fits Air Arms airguns with removable tanks Connects to a female DIN thread If you’ve lost the fill adapter for your Air Arms airgun, here’s a replacement adapter.

JBU Fake Airsoft Suppressor, 4.75", Aluminum $35.99 Fake supressor Aluminum alloy material 14mm counterclockwise thread JBU laser marking 4.75" long This fake suppressor by JBU fits the outer barrel on most airsoft guns with a 14mm counterclockwise thread. The fake suppressor is for looks only and will not actually decrease the sound of your airsoft gun. The fake suppressor features JBU laser markings and has a lightweight matte finish. For airsoft use only.

JBU Fake Airsoft Suppressor, 8.25", Aluminum $47.99 Fake supressor Aluminum alloy material 14mm counterclockwise thread JBU laser marking 8.25" long Enhance the look of your favorite airsoft gun with this high-quality fake suppressor by JBU! This 8.25" fake suppressor fits on the outer barrel of airsoft guns with a 14mm counterclockwise thread. The fake suppressor is made of durable aluminum alloy and has a matte finish. This fake suppressor does NOT decrease the sound of your airsoft gun. For airsoft use only.

Air Venturi CO2 Bulk-Fill Adapter, Fits Umarex EBOS $23.99 Air Venturi CO2 bulk-fill adapter Fits Umarex EBOS Screw the adapter into the CO2 port of the EBOS With the adapter securely attached, screw a paintball CO2 bulk-fill tank (12 oz. recommended) into the adapter (see note below) Extremely economical…more shots, less money EBOS buttstock cannot be attached when you use this bulk-fill CO2 adapter NOTE: The paintball tank valve will immediately open when it’s completely screwed into the adapter. Make sure the adapter is tightly/securely installed in the gun before the tank is tightened down.

Air Arms PCP Adapter, 1/8" BSPP Male to DIN Female $30 PCP adapter 1/8" BSPP male to DIN female For PCP guns that need a DIN connection to 1/8" BSPP hoses for pump or scuba tank adapters 300 bar max rating

AirForce Striker Weight $11.94 If you want to convert an AirForce Airguns Talon or Talon SS air rifle to a Condor air rifle, you’ll need this striker weight, a Hi-Flo tank and a 24" barrel.

Air Venturi Steel Storm CO2 Bulk-Fill Adapter $59.99 Fits Umarex Steel Storm Eliminates need for disposable CO2 cartridges Go back to using disposable CO2 cartridges anytime No alterations are required! Easy to use, easy to attach Includes hose with bulk-fill CO2 tank connector, which connects to the gun’s CO2 inlet Bulk-fill CO2 tank NOT included No more small powerlets. This adapter accepts any paintball bottle (click here for 12 oz or 20 oz). Approx. 1300 shots with a 20-oz. tank & approx. 780 shots with a 12-oz. tank. With this setup, you’ll spend more time shooting and less time and money on 12-gram CO2 cartridges! Plug & play…absolutely no alterations are made to your Steel Storm!

909 Big Bore Probe Adapter, Fits older 909 rifles only $9.59 Probe adapter fits older Sam Yang 909 rifles. It is 1/8" BSPP male on one end and a female thread pattern on the other end, which fits the older 909 probe. It attaches to a hose that ends in a 1/8" BSPP female fitting. We suggest using Teflon tape to connect this probe to an adapter.

Benjamin CO2 Fill Adapter, Fits Discovery, Marauder & Challenger $43.19 CO2 fill adapter Fits Benjamin Discovery & Marauder and Crosman Challenger C GA-320 fitting with .825×1/4 thread, 8" stainless steel hose, female Foster fitting Use with CO2 paintball tanks Do not use for filling gun with pressurized air

Benjamin Scuba Yoke, DIN Valve $155.99 Benjamin scuba yoke Attaches to a scuba tank with a DIN valve Female quick-disconnect coupling on end of hose Includes air pressure gauge (manometer) Fits all Crosman & Benjamin PCP air rifles Fits other PCP guns that have a male quick-disconnect fitting No matter which Crosman or Benjamin precharged pneumatic air gun you own, this scuba yoke will connect your gun to a scuba tank with a DIN valve.

Benjamin Scuba Yoke, K-Valve $137.94 Benjamin scuba yoke Attaches to a scuba tank with a K-valve Female quick-disconnect coupling on end of hose Includes air pressure gauge (manometer) Fits all Crosman & Benjamin PCP air rifles Fits other PCP guns that have a male quick-disconnect fitting No matter which Crosman or Benjamin precharged pneumatic air gun you own, this scuba yoke will connect your gun to a scuba tank with a K-valve.

Replacement Air Reservoir, Fits Feinwerkbau P700 Air Rifles $387.46 Feinwerkbau replacement air reservoir Built-in manometer (air pressure gauge) 2900 psi max air pressure (200 bar) Fits all Feinwerkbau P700 PCP air rifles Instead of carrying a bulky fill tank or a hand pump, take along a spare air reservoir. Fill it up before your match and avoid lugging extra baggage. Same high-quality construction as the original tank that came with your FWB P700 air rifle.

AirForce Scuba Refill Clamp with Gauge $78.6 Scuba yoke fill station 1/4" AirForce tank adapter Fits scuba tank with standard k-valve 1" diameter micro-gauge reads from 1-5,000 psi across one-third of the gauge face Product may not look exactly like the one shown. Universal! Fits long- & short-necked scuba tanks!

AirForce protective steel valve cap $18.3 Protect your airgun from the dust/dirt build up in the air flow valve! The new Bomb-Proof valve protector from AirForce Airguns protects the air valve on the tank from dirt or damage. Especially useful when transporting the rifle broken down for transport or for that spare tank you’re carrying out on an extended shooting session. Made from solid steel to last a lifetime, the new valve protector is another quality product from the makers of the worlds most advanced air gun shooting system

Air Venturi Flash Suppressor, Fits AirForce Bounty Hunter Air Rifles, 1/2"x28tpi $23.94 Flash suppressor Fits AirForce Bounty Hunter air rifles 1/2"x28tpi (internal threads) AirForce Bounty Hunter air rifles come with our custom flash hiders. When we sell a Bounty Hunter rifle, we have to thread the barrel to fit the flash hider. If you already have a threaded barrel on your Bounty Hunter and need a different or spare flash hider, this will fit. If you’re ordering a Condor, Talon or Talon SS (or an extra AirForce barrel) at the same time and want us to thread the outside of your barrel (for a minimal fee), then click the "Add Service" button.

Benjamin CO2 Fill Station, Use With CGA 320 Adapter $75 Benjamin CO2 fill station Attaches to common bulk-fill CO2 tanks Fill smaller refillable CO2 tanks Pin-valve depressor Fill control Vent knob Use with CGA 320 valve For Crosman & Benjamin guns that have refillable CO2 tanks If your Benjamin or Crosman gun has a refillable CO2 tank, get this fill station to save some money! Get a large CO2 tank, fill it and then attach this unit to the tank. You’ll also need an ASA adapter (CGA 320 valve) to attach from the fill station’s hose to the gun. Bulk-filling saves money, gives you more shots for your money and lets you spend more time shooting your air guns!

Crosman Airsource CO2 Paintball Adapter $8.39 Paintball adapter Fits 88-gram AirSource CO2 tanks More convenient than a refillable tank This paintball adapter is compatible with Crosman 88-gram AirSource CO2 tanks. Simply attach the adapter to the paintball marker before you attach it to the cylinder. For paintball use only.

Feinwerkbau Compressed Air Cylinder, Fits P44 Air Pistol $323.99 Compressed air cylinder Fits P44 air pistol Does NOT fit the P44 short Instead of toting fill devices for your FWB P44 air pistol, just fill your tank at home. No pumping, no hoses…just screw in and start shooting. This does not fit the P44 short air pistol.

Blackbird CO2 Bulk-fill Conversion Hose & Adapter $59.99 Fits IZH Drozd Blackbird Adapts Blackbird mag so it connects to a refillable CO2 tank in the stock Eliminates need for disposable CO2 cartridges Easy to convert back to disposable CO2 cartridges No alterations are required Easy to use, easy to attach

Air Venturi IZH Drozd Bulk-Fill Adapter $59.94 No more small powerlets. This original adapter will accept any paintball bottles (click here for 12 oz or 20 oz). (Approx. 1300 shots with 20-oz. tank & approx. 780 shots with a 12-oz. tank) Turn your IZH Drozd into a real fun auto BB machine gun! To install this unit, you must modify the magazine by cutting a small slot in the cover plate. This does not prevent you from going back to 12-gram CO2 cartridges if you decide to use them.

Phillips Pellet Holder for AirForce Talon & Condor Airguns, .177-.20 Cal, Holds 16 Rds, .250" Thick $12.6 Phillips Pellet Holder Holds .177 cal & .20 cal pellets 16 pellet slots Fits AirForce Talon & Condor airguns & Logun S-16 air rifle 3"x3.25" Velcro straps .250" pad thickness Wrap around gun’s tank or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun’s tank or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.

Phillips Pellet Holder for AirForce Talon & Condor Airguns, .177-.20 Cal, Holds 16 Rds, .325" Thick $12.6 Phillips Pellet Holder Holds .177 or .20 cal. pellets 16 pellet slots Fits AirForce Talon & Condor airguns & Logun S-16 air rifle 3"x3.25" .325" pad thickness Wrap around gun’s tank or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun’s tank or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.

Phillips Pellet Holder for AirForce Talon & Condor Airguns, .22-.25 Cal, Holds 16 Rds, .325" Thick $12.6 Phillips Pellet Holder Holds .22 cal & .25 cal pellets 16 pellet slots Fits AirForce Talon & Condor airguns & Logun S-16 air rifle 3"x3.25" Velcro straps .325" thick pad Wrap around gun’s tank or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun’s tank or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.

Phillips Pellet Holder for AirForce Talon & Condor Airguns, .22-.25 Cal, Holds 16 Rds, .425" Thick $12.6 Phillips Pellet Holder Holds .22 or .25 cal. pellets 16 pellet slots Fits AirForce Talon & Condor airguns & Logun S-16 air rifle 3"x3.25" Velcro straps .425" pad thickness Wrap around gun’s tank or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun’s tank or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.

IZH Drozd BB Gun Fake Suppressor $60.6 Includes suppressor, adapter and knurled thread protector. Want the suppressor look and feel for your Drozd BB gun without the expense, hassle and government oversight? Our .22LR fake suppressor is as close to a real suppressor as you can get without paying the tax stamp. It’s CNC-machined from a solid aluminum rod, given a durable liquid ceramic finish and professionally laser-engraved. Everything is identical to the real ATF-registered suppressors! Since its a fake suppressor, the gun’s report (loudness) is NOT reduced. Many shooters prefer the weight and balance improvement with the added suppressor. In fact, it’ll work on any airgun that has a 1/2"x28 TPI threaded barrel. To ensure exact thread alignment, the threaded adapters are CNC-machined to precision tolerances from a solid steel rod in one lathe operation. They are hot-salt blued to match the gun. The included steel thread protector covers the threads on your barrel when no accessory is mounted. Easy installation in place of the existing barrel nut. No tools or modifications are required.

UTG 38" Deluxe Tactical Gun Case, Black $41.94 38"x12" 5 outer mag/accessory pockets w/Velcro close Heavy-duty, water-resistant shell Over 1" padding on each side Reinforced thread, stitching & edging Tough nose & back support D-ring Heavy-duty, lockable #10 zipper Name tag window Wraparound carry handle & shoulder strap

Dewey .177 Bore Mop $4.74 High quality bore mop makes fast work of tough bore cleaning chores. Durable all-cotton material is bonded to a non-embedding brass core. Can be soaked with solvent or used as a swab for paste cleaners. Features 5-40 tpi male thread; fits the .177 Dewey Coated Rods that we carry also. These mops will fit the following Dewey rod.

JBU Fake Airsoft Suppressor, 4.75" Long, Aluminum, Orange Tip $41.99 Fake airsoft supressor Aluminum alloy material 14mm counterclockwise thread JBU laser marking 4.75" long Extend the outer barrel of your airsoft gun with this fake supressor by JBU. The fake airsoft supressor has 14mm counterclockwise threads and easily attaches to the outer barrel of your gun for a unique look in the battlefield!

JBU Fake Airsoft Suppressor, 6.75", Aluminum, Incl. Barrel Extension $71.99 JBU (MSS) modular supressor system Aluminum alloy material 14mm counterclockwise thread 5-pc set Unique JBU serial number 6.75"x1.5" This high-quality modular suppressor system by JBU will enhance the look of your airsoft gun. The modular suppressor system is made of aluminum alloy material for extra durability. The 5-piece set includes a barrel cap, forward extender, base extender, flash hider & adapter. Does not suppress the sound/noise of your gun. For airsoft use only.

Hill MK3 Hand Pump Dry-Pac Refill $9.54 Dry-Pac refill For Hill hand pumps that have a Dry-Pac unit Removes 90% of harmful moisture Replace every 4 months (every 2-3 months in warmer or more humid climates) Non-toxic Dry-Pac desiccant only Keep moisture out of your gun’s air reservoir! Moisture causes rust and can compromise the integrity of your tank. This is the medium that’s inside the Dry-Pac unit.

Benjamin ASA Adapter, Connects Bulk CO2 Tanks to Benjamin Dual-Fuel Guns $21.59 ASA adapter Connects bulk-fill CO2 tanks to Benjamin & Crosman Dual-Fuel guns Screws into CO2 fill station or lever-fill station Includes o-ring & 1/8-inch threaded connection to attach to quick-disconnect fittings Connect your Crosman or Benjamin Dual-Fuel gun to a bulk-fill CO2 tank for more shots per fill.

TSD Sapien Arms Propane Adapter, Plastic, .25 oz. Silicone Oil $13.14 Sapien Arms propane adapter High-strength ABS plastic Lubricates & cleans Enhances performance Easy-to-locate fluorescent green finish Revolutionary design with silicone oil reservoir Cap-retainer loop Does not need to be detached from propane tank to apply silicone oil Excellent alternative for gas airsoft products Includes .25 oz. light silicone oil For airsoft use only

Air Venturi Inline Air Pressure Gauge, 0 to 4500 psi $55.19 Inline air pressure gauge Measures up to 4500 psi Female quick-disconnect Male fitting If you use high-pressure fill devices for your precharged pneumatic guns and don’t have a pressure gauge on your fill device, this will do the job. The inline air pressure gauge fits the Air Venturi carbon fiber tank, AV-4500HPT.

AirForce Shoulder Stock, Fits TalonP Air Pistol $79.8 Shoulder stock Fits AirForce TalonP air pistol Adds 1/4" to 3/3" to length of pull Includes a hex wrench A great accessory for your AirForce Airguns TalonP air pistol. Just add this shoulder stock to convert it to a great little carbine. While this is a solid piece of metal, it doesn’t add much weight to the gun. Easy to attach and remove, this add-on slides over the air tank. Tighten the screws, and you’re ready to go!

Phillips Pellet Holder, Long, .177-.20 Cal, Holds 20 Rds, .325" Thick $12.6 Phillips Pellet Holder Holds .177 or .20 cal. pellets 20 pellet slots 2"x6.5" Velcro straps .325" pad thickness Wrap around gun’s tank or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.

Competition Electronics ProChrono Digital Chronograph $143.99 Digital chronograph Large 4-digit LCD readout 21-7000 fps measurement Meters per second (mps) or feet per second (fps) readout Stores 9 shot strings with up to 99 shots each in power down memory Review each velocity and shot string data Records average velocity, standard deviation and extreme spread Delete individual shots or entire string with the touch of a button Serial data connection port for use with remote accessories 32-100 deg. F operating temperature range 250 mSec to 500 mSec time between shots 750 nSec crystal-controlled shot timing resolution +/-1% or better accuracy of measured velocity 1/4"x20 mounting hole thread 3/16"x16" guide wire size 16"x4"x3.25" 15 mAh power consumption On/off switch Uses one 9V alkaline battery (not included) There are lots of optional accessories you can get to customize your Competition Electronics ProChrono digital chronograph. The accuracy of this chronograph is so well-respected in the shooting industry, that this chronograph is used for the record in Bianchi Cup events. Use the ProChrono chronograph to measure the velocities of your airguns, firearms and airsoft guns. It can do it all!