How many balloons can fill the tank completely?

A tank with a volume of 0.13 m 3 contains helium gas at 160 atm. How many balloons can be completely fill the tank if each balloon is a sphere of 26 cm in diameter at an absolute pressure of 1.2 atm?

0.13 m ^ 3 = 130 dm ^ 3 = 130 r L = 1.3 cm V of a sphere = 4 x 3.14 (1.3) ^ 3 / 3 = 9.2 dm ^ 3 130 x 160 x V = 1.2 V dm ^ 3 = 17,333 17,333 / 9.2 = 1.884

Fish tank use to fill up gap T61 T85 T90

CO2 Fill-Up $6 CO2 Fill-Up – gas. Please only add it to the shopping cart if you are purchasing a CO2 tank at the same time.

Benjamin CO2 Fill Station, Use With CGA 320 Adapter $75 Benjamin CO2 fill station Attaches to common bulk-fill CO2 tanks Fill smaller refillable CO2 tanks Pin-valve depressor Fill control Vent knob Use with CGA 320 valve For Crosman & Benjamin guns that have refillable CO2 tanks If your Benjamin or Crosman gun has a refillable CO2 tank, get this fill station to save some money! Get a large CO2 tank, fill it and then attach this unit to the tank. You’ll also need an ASA adapter (CGA 320 valve) to attach from the fill station’s hose to the gun. Bulk-filling saves money, gives you more shots for your money and lets you spend more time shooting your air guns!

Benjamin CO2 & Air FIll Adapter, Fits Benjamin Air Tank or Standard Paintball CO2 Tank $83.99 Made specifically for the Dual Fuel capability of the Benjamin Discovery & Marauder and the Crosman Challenger. Includes: CGA-320 fitting for Benjamin carbon fiber tank or a standard paintball CO2 tank Fitting is .825×14 (standard paintball CO2 connector size) 7" stainless steel braided hose (12" overall length) Patented bleeder valve Female Foster quick-disconnect fitting

Air Venturi CO2 Bulk-Fill Adapter, Fits Umarex EBOS $23.99 Air Venturi CO2 bulk-fill adapter Fits Umarex EBOS Screw the adapter into the CO2 port of the EBOS With the adapter securely attached, screw a paintball CO2 bulk-fill tank (12 oz. recommended) into the adapter (see note below) Extremely economical…more shots, less money EBOS buttstock cannot be attached when you use this bulk-fill CO2 adapter NOTE: The paintball tank valve will immediately open when it’s completely screwed into the adapter. Make sure the adapter is tightly/securely installed in the gun before the tank is tightened down.

Air Venturi Steel Storm CO2 Bulk-Fill Adapter $59.99 Fits Umarex Steel Storm Eliminates need for disposable CO2 cartridges Go back to using disposable CO2 cartridges anytime No alterations are required! Easy to use, easy to attach Includes hose with bulk-fill CO2 tank connector, which connects to the gun’s CO2 inlet Bulk-fill CO2 tank NOT included No more small powerlets. This adapter accepts any paintball bottle (click here for 12 oz or 20 oz). Approx. 1300 shots with a 20-oz. tank & approx. 780 shots with a 12-oz. tank. With this setup, you’ll spend more time shooting and less time and money on 12-gram CO2 cartridges! Plug & play…absolutely no alterations are made to your Steel Storm!

Air Venturi Scuba Tank Adapter $65.99 "Scuba Yoke" Fill Station

Blackbird CO2 Bulk-fill Conversion Hose & Adapter $59.99 Fits IZH Drozd Blackbird Adapts Blackbird mag so it connects to a refillable CO2 tank in the stock Eliminates need for disposable CO2 cartridges Easy to convert back to disposable CO2 cartridges No alterations are required Easy to use, easy to attach

Air Venturi IZH Drozd Bulk-Fill Adapter $59.94 No more small powerlets. This original adapter will accept any paintball bottles (click here for 12 oz or 20 oz). (Approx. 1300 shots with 20-oz. tank & approx. 780 shots with a 12-oz. tank) Turn your IZH Drozd into a real fun auto BB machine gun! To install this unit, you must modify the magazine by cutting a small slot in the cover plate. This does not prevent you from going back to 12-gram CO2 cartridges if you decide to use them.

Air Arms Air Tank, Fits S200/T200 Air Rifles with Removable Tanks $143.94 Air tank Fits Air Arms S200/T200 air rifles with removable tanks If your Air Arms S200/T200 air rifle has a removable tank, this extra tank will be real convenient. Instead of carrying a pump or scuba tank plus the fill adapters, just fill up another tank and take it with you.

AirForce DIN Fill System, Fits AirForce Talon & Condor Rifles $78.6 AirForce Airguns DIN adapter Fits AirForce Talon & Condor airguns Fits any scuba tank with a DIN fitting If your scuba tank comes with a DIN fitting, get this and start filling your Talon and Condor PCP guns!

Hammerli Pneuma Extra Air Tank, Also Fits HaleStorm & AT44PA Rifles $131.99 Don’t carry a scuba tank or pump when you go hunting or plinking! Carry an extra tank that you filled up at home! It’s lighter than fill devices and will let you keep shooting instead of filling. Fits the Hammerli Pneuma, Air Venturi HaleStorm and Hatsan AT44PA air rifles.

Air Venturi Scuba Tank Adapter & Hose Assembly, Female Connector, Gauge $93.54 Scuba tank adapter Includes hose with female connector Fits both tall- and short-necked scuba tanks K-valve only (does not fit DIN valves Includes gauge Connect your scuba tank to your PCP air rifles and air pistols and fill ‘er up!

Deluxe CO2 Fill Station $83.94 CO2 fill station Fills mini-CO2 tanks (such as the Daisy 888), 12 oz tanks & 20-oz tanks Wear eye protection when using fill stations!

AirForce Quick-Detach Air Tank, Fits TalonP Air Pistols $159.6 Quick-detach air tank Fits TalonP air pistols Can be used with compressed air or dry nitrogen gas only 6.125" long Need some extra air? Don’t carry refill equipment! Get a spare tank, fill it up at home & take it with you. Simply swap the filled tank for the empty one, and you’re good to go.

AirForce CO2 Adapter with Filled 12-oz. CO2 tank, fits Condor, Talon & Talon SS $143.94 Includes CO2 adapter & filled 12-oz. CO2 tank Fits AirForce Condor, Talon & Talon SS guns Over 1,000 shots per CO2 tank Ideal for shooting indoors Easy to switch back to air No handpump or scuba tank required Quieter operation Ground shipping only How to switch from high-pressure air to CO2: Unscrew your AirForce air tank from your rifle Screw in your CO2 adapter into your rifle Screw in the filled tank into the other end of the adapter Start shooting! When this tank is empty or down to a low level, fill up with more CO2 from a larger bulk-fill tank. This filled tank can be sent only by ground…no air shipping allowed!

Benjamin Air Tank, 2000 psi Output $191.99 Benjamin air tank Designed for high-pressure air up to 3000 psi Regulated to 2000 psi output (specifically for the Benjamin Discovery & Marauder and the Crosman Challenger) 72 cubic inches Fills a 2000 psi rifle 6 to 8 times from one tankful To fill the Discovery, Marauder or Challenger, you’ll also need FAH002 (Dual Fuel adapter) Do not use this tank with paintball guns Includes male quick-disconnect coupling (can be filled with the Benjamin hand pump) 4.5" outside dia., 11.5" long, 4.40 lbs.

Carbon Fiber Tank, 4500 psi, 88 cu ft $839.99 DOT-approved Carbon fiber filament wound over aluminum bladder 88 cu ft 4500 psi max pressure 11.3 lbs dry weight Includes: Hose with 1/8" BSPP threads on both ends Seal washer Hose has an inline gauge (eliminates use of a yoke) Air Venturi female quick-disconnect adapter with 1/8" BSPP male threads on one end This is not a scuba tank. It’s a carbon fiber tank, which is also called an scba tank, and has a high-pressure scba valve…like the one firefighters use on their scba tanks. Many dive shops do not have the ability to fill these tanks. In some towns, the fire department has a compressor that can fill a high-pressure carbon fiber tank, as firefighters use smaller scba tanks for breathing equipment during rescues. You might want to approach your local fire department and ask if they would be willing to fill your high-pressure carbon fiber/scba tank from their compressor. Another alternative is to contact a local paintball store, as paintballers use carbon fiber tanks to fill their markers. If the only alternative you have is to fill your high-pressure carbon fiber scba tank at a dive shop, a 1/8" BSPP male to DIN female adapter (our part # AA-Z2128-300) can temporarily replace the hose on the valve adapter so the dive shop can fill your tank.

AirForce CO2 Adapter with Filled 20-oz. CO2 Tank, Fits Condor, Talon & Talon SS $151.19 Includes CO2 adapter & filled 20-oz. CO2 tank Fits AirForce Condor, Talon & Talon SS guns Over 1,000 shots per CO2 tank Ideal for shooting indoors Easy to switch back to air No handpump or scuba tank required Quieter operation Ground shipping only How to switch from high-pressure air to CO2: Unscrew your AirForce air tank from your rifle Screw in your CO2 adapter into your rifle Screw in the filled tank into the other end of the adapter Start shooting! Since this tank is filled with CO2, it has to be shipped via ground service. Start shooting when this arrives, and refill it from a bulk-fill CO2 tank.

Benjamin Carbon Fiber Tank, 54 cu ft, Gauge, Hose w/Female Quick-Disconnect $719.99 Benjamin carbon fiber tank 54 cu-ft capacity 4,500 psi max pressure 38" long 12" microbore hose with female quick-disconnect Built-in air pressure gauge (manometer) Bleed valve Restricted-flow manifold for controlled, precise filling Lightweight, easier to transport than a metal scuba tanks 4.625"x37" 15 lbs. This monster carbon fiber air tank will keep you in air for days, weeks…and probably months! Fill all your precharged pneumatic (PCP) air pistols and air rifles and shoot day and night. Depending on the size of your gun’s onboard reservoir, you’ll get up to 80 fills with this big boy.

Eun Jin Fill Port Assembly, Fits Sumatra Air Rifle $21.54 Fill port assembly Fits Sumatra air rifle Original replacement part from Eun Jin Did you damage the fill port on your Sumatra air rifle? Replace it with this one made by Eun Jin, the original manufacturer.

Benjamin ASA Adapter, Connects Bulk CO2 Tanks to Benjamin Dual-Fuel Guns $21.59 ASA adapter Connects bulk-fill CO2 tanks to Benjamin & Crosman Dual-Fuel guns Screws into CO2 fill station or lever-fill station Includes o-ring & 1/8-inch threaded connection to attach to quick-disconnect fittings Connect your Crosman or Benjamin Dual-Fuel gun to a bulk-fill CO2 tank for more shots per fill.

AirForce Condor CO2, 20-oz. CO2 tank, Scoped $815.94 1,000+ shots on one CO2 tank!

AirForce Condor CO2, 12-oz. CO2 tank, Scoped $809.94 1,000+ shots on one CO2 tank!

Benjamin CO2 Fill Adapter, Fits Discovery, Marauder & Challenger $43.19 CO2 fill adapter Fits Benjamin Discovery & Marauder and Crosman Challenger C GA-320 fitting with .825×1/4 thread, 8" stainless steel hose, female Foster fitting Use with CO2 paintball tanks Do not use for filling gun with pressurized air

Air Arms Fill Adapter, Fits Air Arms Rifles w/Detachable Tanks $35.94 Fill adapter Fits Air Arms airguns with removable tanks Connects to a female DIN thread If you’ve lost the fill adapter for your Air Arms airgun, here’s a replacement adapter.

Feinwerkbau Compressed Air Cylinder, Fits P44 Air Pistol $323.99 Compressed air cylinder Fits P44 air pistol Does NOT fit the P44 short Instead of toting fill devices for your FWB P44 air pistol, just fill your tank at home. No pumping, no hoses…just screw in and start shooting. This does not fit the P44 short air pistol.

Creedmoor Sports K Valve to 200 DIN Valve Adapter $59.98 K valve to 200 DIN valve adapter If your fill hose has a male 200 DIN thread connection and your scuba tank has a K valve, you’ll need this adapter.

Leisure Pro Scuba Tank Accessory Kit $47.99 Accessory kit for Leisure Pro 80 cu ft scuba tank Includes black tank boot, yellow tank cover & yellow K-valve protector

AirForce Condor CO2, Incl adapter, 12-oz. CO2 tank $713.94 1,000+ shots on one CO2 tank!

AirForce Talon CO2, 12-oz. CO2 tank, 3-9×40 Scope $755.94 1,000+ shots on one CO2 tank!

AirForce Condor CO2, Incl adapter, 20-oz. CO2 tank $719.94 1,000+ shots on one CO2 tank!

AirForce Talon SS CO2, 12-oz. CO2 Tank, Scoped $755.94 1,000+ shots on one CO2 tank!

AirForce Talon SS CO2, 20-oz. CO2 Tank, Scoped $755.94 1,000+ shots on one CO2 tank!

AirForce Talon SS CO2, Adapter & 20-oz. CO2 Tank $599.94 1,000+ shots on one CO2 tank!

AirForce Talon CO2, 20-oz. CO2 tank, 3-9×40 Scope $763.14 1,000+ shots on one CO2 tank!

AirForce Talon CO2, Incl adapter, 12-oz. CO2 tank $563.94 1,000+ shots on one CO2 tank!

AirForce Talon CO2, Incl adapter, 20-oz. CO2 tank $571.14 1,000+ shots on one CO2 tank!

AirForce Talon SS CO2, Adapter, 12-oz. CO2 Tank $593.93 1,000+ shots on one CO2 tank!

CO2 Tank, 12-oz., Refillable $23.99 CO2 tank 12 oz. Refillable Durable aluminum construction Pin-valve assembly included 2.5" diameter 10" total length

Replacement Air Reservoir, Fits Feinwerkbau P700 Air Rifles $387.46 Feinwerkbau replacement air reservoir Built-in manometer (air pressure gauge) 2900 psi max air pressure (200 bar) Fits all Feinwerkbau P700 PCP air rifles Instead of carrying a bulky fill tank or a hand pump, take along a spare air reservoir. Fill it up before your match and avoid lugging extra baggage. Same high-quality construction as the original tank that came with your FWB P700 air rifle.

Quick-Disconnect Male Fitting + O-Ring $23.99 Male quick-disconnect fitting with o-ring Converts Sam Yang, Sumatra & Career rifles to connect to the Benjamin 3-stage hand pump Connects to female quick-disconnect (Quickadap1EM1B), which has 1/8 BSPP threads & fits most scuba tank & hand pump adapter hoses Installation instructions: To start the old fill port turning, insert the round shaft of a phillips screwdriver into the fill port hole and turn the port counterclockwise. Once the port loosens, you can take it off by hand the rest of the way. After you’ve unscrewed your old fill port from the end of your tank, thread in this quick-disconnect fitting & o-ring (included) to seal the connection. No need to depressurize the tank because the tank has a check valve.

Air Arms MPR Air Tank, Built-in Gauge $171.52 MPR air tank Built-in air pressure gauge (manometer)

AirForce Micro-Meter Tank $217.8 Micro-meter tank Fits all AirForce rifles Delivers up to 100 shots Shoots at a reduced velocity (600 fps) Includes metal buttplate Ideal for low to mid-level velocities Perfect for indoor shooting! Delivers consistent shots that are naturally quieter due to lower velocities

AirForce Extra Air Tank, Air or Nitrogen, Fits Talon & Talon SS $217.8 There’s nothing like an extra tank for air or nitrogen to keep the shooting fun going! Air tank includes metal buttplate.

CO2 Tank, 20 oz., Refillable $31.19 CO2 tank 20 oz. Refillable Durable aluminum construction Pin-valve assembly included 3.25" diameter 10.58" total length

Air Venturi HP4500 Replacement Valve, Fits Carbon Fiber Tank $179.99 Replacement valve for Air Venturi AV-4500HPT, a carbon fiber tank.

Air Venturi Inline Air Pressure Gauge, 0 to 4500 psi $55.19 Inline air pressure gauge Measures up to 4500 psi Female quick-disconnect Male fitting If you use high-pressure fill devices for your precharged pneumatic guns and don’t have a pressure gauge on your fill device, this will do the job. The inline air pressure gauge fits the Air Venturi carbon fiber tank, AV-4500HPT.

AirForce Scuba Refill Clamp with Gauge $78.6 Scuba yoke fill station 1/4" AirForce tank adapter Fits scuba tank with standard k-valve 1" diameter micro-gauge reads from 1-5,000 psi across one-third of the gauge face Product may not look exactly like the one shown. Universal! Fits long- & short-necked scuba tanks!

CO2 Tank, Filled, 12 oz., Refillable $29.99 CO2 tank (filled with CO2 by Pyramyd Air) 12 oz. Refillable Durable aluminum construction Pin-valve assembly included 2.5" diameter 10" total length

CO2 Tank, Filled, 20 oz., Refillable $35.99 CO2 tank (filled with CO2 by Pyramyd Air) 20 oz. Refillable Durable aluminum construction Pin-valve assembly included 3.25" diameter 10.58" total length

AirForce Spin-Loc Air Tank, Fits TalonP Air Pistols $188.1 Spin-Loc air tank Connects to an AirForce TalonP pistol without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings 6.125" long Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

Crosman AirSource, pre-filled, disposable, 88 gram CO2 tank $10.74 AirSource, the new, pre-filled, disposable, 88 gram (3.1 oz) CO2 tank has now been designed into a series of Crosman air rifles. AirSource not only allows more shots, up to 400 on one tank, but the accuracy and consistency is greater because of the larger reservoir of CO2.

Airforce Edge Spare Tank & Buttstock Assembly, Fits Airforce Edge Air Rifles $204.3 Airforce Edge tank & buttstock assembly Fits Airforce Edge air rifles The Edge Spare Tank with Buttstock assembly provides complete back up for the big match or an extended shooting session.

AirForce Spin-Loc Hi-Flo Air Tank, Fits .177 AirForce Condor Rifles $270 Spin-Loc Hi-Flo air tank Connects to .177-caliber* AirForce Condor rifles without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted** to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *The Condor’s Hi-Flo tank is caliber-specific. **To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

Airforce Edge Extra Air Tank, Fits Airforce Edge Air Rifles $164.34 Airforce Edge air tank Fits Airforce Edge air rifles Easily, quickly swap tanks on your Edge by loosening one screw in the buttstock assembly.

AirForce Spin-Loc Standard Air Tank, Fits AirForce Talon & Talon SS Rifles $246.6 Spin-Loc standard air tank Connects to an AirForce Talon/Talon SS rifle without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

AirForce Spin-Loc Micro-Meter Air Tank, Fits AirForce Sporting Rifles $246.6 Spin-Loc Micro-Meter air tank Connects to an AirForce Talon/Talon SS or Condor rifle without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings 10.875" long Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

Air Venturi Tank Adapter Assembly, 4500 psi, for High-Pressure SCBA Tanks $105 Tank adapter assembly Fits high-pressure scba (self-contained breathing apparatus) tank, including the Air Venturi carbon fiber tank 4500 psi Includes bleeder, hose and female quick-disconnect coupling Does not include a manometer (air pressure gauge) Fits the Air Venturi carbon fiber tank–AV-4500HPT [PY-A-350]. Inline manometer (air pressure gauge) sold separately–AV-00031 [PY-A-3865]. Suitable for connecting your high-pressure scba tank to a precharged pneumatic air rifle.

BSA R-10 PCP Air Rifle $1199.99 Compensator, Shrouded, Removable Tank

AirForce Extra Air Tank, Air or Nitrogen, Hi-Flo Valve, for Condors $241.8 There’s nothing like an extra reservoir for air or nitrogen to keep the shooting fun going! Air tank includes metal buttplate. Up to 15 shots at full power. 30 – 40 shots at low power settings. Use only with the AirForce Condor in .20, .22 or .25 caliber. Not recommended for .177 cal. Condors.

Leisure Pro Scuba Tank, K Valve, 80 cu ft, Aluminum, 3000 psi $299.99 Scuba tank K valve 80 cu ft Aluminum 3000 psi maximum pressure Shipped empty Yellow exterior color

AirForce Spin-Loc Hi-Flo Air Tank, Fits .20, .22 & .25 AirForce Condor Rifles $270 Spin-Loc Hi-Flo air tank Connects to AirForce Condor rifles without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank Does not fit .177-caliber guns. Use ONLY for .20-, .22- and .25-caliber Condors. The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

AirForce Scuba Tank Adapter K-valve, Steel Hose $102.6 AirForce Airguns scuba tank adapter K-valve Pressure gauge goes up to 3,000 psi Stainless steel mesh hose* Ends in a female quick-disconnect *While the hose is stainless steel mesh, it MAY also have a black plastic cover. Which one you get depends on what we have in stock.

AirForce Scuba Tank Adapter, DIN Connector, Steel Hose $102.6 AirForce Airguns scuba tank adapter DIN connector Pressure gauge goes up to 3,000 psi Stainless steel mesh hose* Ends in a female quick-disconnect *While the hose is stainless steel mesh, it MAY also have a black plastic cover. Which one you get depends on what we have in stock.

Benjamin Carbon Fiber Tank, 90 cu in, Gauge, Hose w/Female Quick-Disconnect $479.99 Benjamin carbon fiber tank 90 cu in capacity 4,500 psi max pressure 15" long 12" microbore hose with female quick-disconnect Built-in air pressure gauge (manometer) Bleed valve Restricted-flow manifold for controlled, precise filling Lightweight, easier to transport than a metal scuba tank 4.625"x14.625" 4.6 lbs. Have you resorted to carrying a steel or aluminum buddy bottle to refill your PCP air guns in the field? You’ll get even more refills from this carbon fiber tank since it’s 4,500 psi. Plus, it doesn’t weigh as much. Depending on the size of your airgun’s onboard reservoir, you could get up to 16 fills before you have to refill this tank.

Air Venturi Scuba Tank, 80 cu ft, Aluminum, Deluxe Valve, 3,000 psi, Black $239.99 Scuba tank K valve 80 cu ft Aluminum 3,000 psi maximum pressure (206 bar) Shipped empty Black Indicator shows if valve is open or closed If you shoot precharged pneumatic guns, you’ll need an air source. A scuba tank is a great way to store lots of air to pressurize all your guns.

Crosman AirSource, pre-filled, disposable, 88 gram CO2 tank, 25ct BULK $197.94 Bulk AirSource Tanks Buy bulk rate CO2 at PyramydAir! 25 Tanks are included in this offer. Ideal for shooting clubs. AirSource, the new, pre-filled, disposable, 88 gram (3.1 oz) CO2 tank has now been designed into a series of Crosman air rifles. AirSource not only allows more shots, up to 400 on one tank, but the accuracy and consistency is greater because of the larger reservoir of CO2.

IZH Drozd BB – Bulk CO2 $395.99 Refillable 12-oz. or 20-oz. CO2 tank

AirForce Extra Air Tank, Air or Nitrogen, Hi-Flo Valve, Use with .177 Cal Condor $241.8 There’s nothing like an extra reservoir for air or nitrogen to keep the shooting fun going! Air tank includes metal buttplate. Up to 15 shots at full power. 30 – 40 shots at low power settings. Use only with .177 caliber Condor

Sumatra 2500, 500cc Reservoir $695.99 More Shots From One Fill Up!

Sam Yang Recluse Dual Tank Air Rifle $839.94 .357, Precharged Pneumatic

Dragon Claw Dual Tank Air Rifle $839.94 .50 Cal., Precharged Pneumatic

AirForce CO2 Adapter, Fits Condor, Talon & Talon SS $119.94 Fits all Condor, Talon and Talon SS rifles Over 1,000 shots per CO2 tank Ideal for shooting indoors Easy to switch back to air No handpump or scuba tank required Quieter operation How to switch from high-pressure air to CO2: Unscrew your AirForce air tank from your rifle Screw in the CO2 adapter into your rifle Screw in the filled tank into the other end of the adapter Start shooting!

AirForce 1/4" male BSPP Adapter, For AirForce Guns $18.3 1/4" male BSPP adapter Connects your AirForce rifle to a scuba tank or hand pump

Air Venturi Thumbhole Stock, Fits Older AirForce Rifles & Tanks $47.99 Thumbhole stock Fits older AirForce Airguns Condor, Talon & Talon SS rifles & tanks* Easily attaches to gun’s pistol grip & high-pressure air tank buttplate (does not fit CO2 tank) No machining required *Does not fit the newer AirForce guns or tanks with the Spin-Loc feature.

Crosman AirSource, pre-filled, disposable, two 88 gram CO2 tanks $19.19 AirSource, the new, pre-filled, disposable, 88 gram CO2 tank has now been designed into a series of Crosman air rifles. AirSource not only allows more shots, up to 400 on one tank, but the accuracy and consistency is greater because of the larger reservoir of CO2.

Air Venturi Thread Converter + Hose $29.99 Hose + adapter for AirForce Airguns scuba tank & hand pump One end has 1/4 BSPP male threads to fit the female threads of the AirForce scuba tank adapter or AirForce hand pump The other end has 1/8 BSPP female threads & fits the hose with 1/8 BSPP male threads Hose ends in 1/8 BSPP female thread for use with 1/8 BSPP filling adapters or our female quick-disconnect coupling Includes flexible hose & 2 O-rings (wide rubber O-ring is used with AirForce 3-stage hand pump; bonded metal O-ring is used with AirForce scuba tank adapter)

Air Arms PCP Adapter, 1/8" BSPP Male to DIN Female $30 PCP adapter 1/8" BSPP male to DIN female For PCP guns that need a DIN connection to 1/8" BSPP hoses for pump or scuba tank adapters 300 bar max rating

AirForce Striker Weight $11.94 If you want to convert an AirForce Airguns Talon or Talon SS air rifle to a Condor air rifle, you’ll need this striker weight, a Hi-Flo tank and a 24" barrel.

Benjamin Scuba Yoke, DIN Valve $155.99 Benjamin scuba yoke Attaches to a scuba tank with a DIN valve Female quick-disconnect coupling on end of hose Includes air pressure gauge (manometer) Fits all Crosman & Benjamin PCP air rifles Fits other PCP guns that have a male quick-disconnect fitting No matter which Crosman or Benjamin precharged pneumatic air gun you own, this scuba yoke will connect your gun to a scuba tank with a DIN valve.

Benjamin Scuba Yoke, K-Valve $137.94 Benjamin scuba yoke Attaches to a scuba tank with a K-valve Female quick-disconnect coupling on end of hose Includes air pressure gauge (manometer) Fits all Crosman & Benjamin PCP air rifles Fits other PCP guns that have a male quick-disconnect fitting No matter which Crosman or Benjamin precharged pneumatic air gun you own, this scuba yoke will connect your gun to a scuba tank with a K-valve.

AirForce protective steel valve cap $18.3 Protect your airgun from the dust/dirt build up in the air flow valve! The new Bomb-Proof valve protector from AirForce Airguns protects the air valve on the tank from dirt or damage. Especially useful when transporting the rifle broken down for transport or for that spare tank you’re carrying out on an extended shooting session. Made from solid steel to last a lifetime, the new valve protector is another quality product from the makers of the worlds most advanced air gun shooting system

ICS Olympic Arms PCR-4/Mod 4 High Capacity 450 Round Metal Magazine $34.74 450 round high capacity magazine Compatible with Olympic Arms, ICS guns This magazine is not recommended for use with the KWA AEGs Easy to fill, just pour in 450 rounds through the top hatch. Easy winding spring dial on the bottom keeps tension on the ammo for smooth feeding.

300 Round DPMS On Duty Kit Rifle Magazine $22.74 Will fit in: CG18780, 18980. Build material: molded polycarbonate. Color: Balck Easy to fill, just pour in 300 rounds through the top hatch. Easy winding spring dial on the bottom keeps tension on the ammo for smooth feeding. Made in China

Air Venturi Microbore Hose, DN2, Up to 4500 PSI, 1/8" BSPP Connectors, 24" Long $35.99 DN2 microbore hose Fits high pressure tanks and hand pumps Max operating pressure is 4500 psi 1/8" BSPP male & female connectors 24" long Microbore hoses are a great way to get air into your gun without having to fill up a large-diameter hose, which is what traditionally comes with fill equipment such as scuba tanks and hand pumps. Our microbore hose fills your gun faster so you can spend more time shooting and less time filling.

Airforce Braided Steel Hose, Quick-Disconnect, Fits Older Airforce Refill Clamp & Hand Pump $36 Braided steel hose Quick-disconnect fitting Fits older Airforce refill clamp with gauge (U1012) & older AirForce hand pump (U1014) To fill Talon/Condor rifles, use a refill adapter with quick-disconnect nipple (U1013) to attach the hose’s quick-disconnect This braided steel hose will stand up to many years of use without compromising its integrity. Strong, flexible, reliable…and safe. Current AirForce high-pressure fill devices come with a hose. The older pumps and scuba yokes did not come with a hose. If you have one of the older units and need to replace your hose, this is the item to get.

Crosman Airsource CO2 Paintball Adapter $8.39 Paintball adapter Fits 88-gram AirSource CO2 tanks More convenient than a refillable tank This paintball adapter is compatible with Crosman 88-gram AirSource CO2 tanks. Simply attach the adapter to the paintball marker before you attach it to the cylinder. For paintball use only.

Phillips Pellet Holder for AirForce Talon & Condor Airguns, .177-.20 Cal, Holds 16 Rds, .250" Thick $12.6 Phillips Pellet Holder Holds .177 cal & .20 cal pellets 16 pellet slots Fits AirForce Talon & Condor airguns & Logun S-16 air rifle 3"x3.25" Velcro straps .250" pad thickness Wrap around gun’s tank or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun’s tank or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.

Phillips Pellet Holder for AirForce Talon & Condor Airguns, .177-.20 Cal, Holds 16 Rds, .325" Thick $12.6 Phillips Pellet Holder Holds .177 or .20 cal. pellets 16 pellet slots Fits AirForce Talon & Condor airguns & Logun S-16 air rifle 3"x3.25" .325" pad thickness Wrap around gun’s tank or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun’s tank or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.

Phillips Pellet Holder for AirForce Talon & Condor Airguns, .22-.25 Cal, Holds 16 Rds, .325" Thick $12.6 Phillips Pellet Holder Holds .22 cal & .25 cal pellets 16 pellet slots Fits AirForce Talon & Condor airguns & Logun S-16 air rifle 3"x3.25" Velcro straps .325" thick pad Wrap around gun’s tank or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun’s tank or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.

Phillips Pellet Holder for AirForce Talon & Condor Airguns, .22-.25 Cal, Holds 16 Rds, .425" Thick $12.6 Phillips Pellet Holder Holds .22 or .25 cal. pellets 16 pellet slots Fits AirForce Talon & Condor airguns & Logun S-16 air rifle 3"x3.25" Velcro straps .425" pad thickness Wrap around gun’s tank or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun’s tank or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.

King Arms Green Gas, 8 oz., 12ct $131.94 King Arms green gas For use with all green gas airsoft guns For airsoft use only 12 canisters per box 8 oz. Enjoy crisp blowback recoil with every shot with King Arms green gas. Green gas lets your airsoft gun fire smoothly during intense airsoft skirmishes. Simply hold the canister upside down and match the nozzle with the magazine port to use. Fill the magazine in short spurts for best results.$28 HazMat fee included in price. Ground shipping only. ATTENTION: The nozzle of this green gas canister is NOT compatible with the extended base magazine fill ports on the WE Full Metal 1911 MEU (WE-052a) & WE Full Metal 1911 MEU w/ Rail (WE-052b) green gas pistols.

AirForce PCP Hand Pump, for AirForce Rifles, Incl. Hose + Adapter, Pumps up to 3600 psi $234.9 Fits AirForce Condor, Talon & Talon SS rifles. 3-stage hand pump Does not heat up with constant use Requires less effort than other pumps Goes up to 3,600 psi Integral air pressure gauge Moisture filter Incl. 11" braided steel hose with female quick-disconnect coupling and AirForce fill adapter with male quick-disconnect coupling Every pump tested by the manufacturer

Evanix Replacement Probe, Fits Newer Evanix Renegade Carbine, Rainstorm, Blizzard, Speed & Max Air Guns $23.99 Probe for filling air reservoir Fits Evanix Renegade carbine (NOT the long gun), Rainstorm and Blizzard long guns, Speed rifle and Max bullpup Fits newer models only Does NOT fit Evanix Renegade long gun or any other gun except for those listed above Own a newer Evanix airgun that uses a probe to fill the reservoir? The newer models use a longer probe. This probe fits them.

Replacement Probe, Fits Older AR6 & Renegade PCP Airguns $23.06 Probe for filling air reservoir Fits Evanix AR6 Hunting Master rifle and pistol & Renegade rifle Fits older models Does NOT fit any other Evanix rifle or pistol (Blizzard, carbines, Speed, Conqest, Max, etc.) Own an older AR6 or Renegade? The newer models use a longer probe. This probe fits the earlier models, which require a shorter air fill probe. Get the right probe for your air gun.

SIG Sauer 556 AEG Mag, 400rd $22.74 SIG Sauer 556 AEG Mag, 400rd Magazines will fit in and are compatible with: Sig Sauer 556 (item # 28907) Mod4�s/Mod16 AEG�s High capacity magazines for electric guns are a must for any serious airsofter. The high-cap magazines look exactly the same as the standard magazines but can hold up to 8 times the amount of ammo. Easy to fill, just pour in 400 rounds through the top hatch. Easy winding spring dial on the bottom keeps tension on the ammo for smooth feeding.

SIG Sauer 556 AEG Mag, 300rd $17.94 SIG Sauer 556 AEG Mag, 300rd Will fit in: Sig Sauer 556 (item # 28907) High capacity magazines for electric guns are a must for any serious airsofter. The high-cap magazines look exactly the same as the standard magazines but can hold up to 8 times the amount of ammo. Easy to fill, just pour in 300 rounds through the top hatch. Easy winding spring dial on the bottom keeps tension on the ammo for smooth feeding.

Echo1 SG 200 round Magazine $23.94 200rd Hi Capacity metal magazine for Sub Gun style guns. High capacity magazines for electric guns are a must for any serious airsofter. The high-cap magazines look exactly the same as the standard magazines but can hold up to 8 times the amount of ammo. Easy to fill, just pour in 200 rounds through the top hatch. Easy winding spring dial on the bottom keeps tension on the ammo for smooth feeding.

Cybergun Thompson 380 Magazine $23.99 For Thompson Airsoft Electric Full-Metal Body AEGs (item # CG43900, CG43901, CG43907, CG43908,CG71015). Holds 380 rounds.Easy to fill, just pour in 380 rounds through the top hatch. Easy winding spring dial on the bottom keeps tension on the ammo for smooth feeding. This magazine will not work with the Thompson Plastic Body AEGs: CG430902, CG43903, CG43904, CG43905, CG43906.

H&K G36C 440 Round Airsoft Magazine $41.99 This is the H&K G36C High Capacity 440 Round Magazine for use with the H&K G36C (Item#:HK-2279000), Echo 1 SM-C airsoft, TSD Tactical SG-Series AEG’s. Easy to fill, just pour in 440 rounds through the top hatch. Easy winding spring dial on the bottom keeps tension on the ammo for smooth feeding. Best of all these are absolutely perfect in look and feel. Not compatable with dual power G36C – HK-2261230

FAMAS 300 Round AEG Magazine $19.14 For FAMAS Airsoft Electric Rifle (item #CG400902). Holds 300 rounds. Easy to fill, just pour in 300 rounds through the top hatch. Easy winding spring dial on the bottom keeps tension on the ammo for smooth feeding. Also compatible with Tokyo Marui FAMAS. Attention customers! The door to the BB loading reservoir is difficult to open with just your fingers. We recommend using a firm, thin object to lift the lid open to avoid breaking your nails or hurting your hands.

TSD ABS AK Banana Magazine, 550rds $17.94 JB Intl’ AK47 ABS hi-cap magazine Materal: ABS Plastic Color/Finish: Black/Matt-Black Design: Standard Capacity: 550rd Easy to fill, just pour in 200 rounds through the top hatch. Easy winding spring dial on the bottom keeps tension on the ammo for smooth feeding. Application: ICS, TM, CA, G&G, TSD, SRC, etc. AK variants

Hill MK3 Hand Pump Dry-Pac Refill $9.54 Dry-Pac refill For Hill hand pumps that have a Dry-Pac unit Removes 90% of harmful moisture Replace every 4 months (every 2-3 months in warmer or more humid climates) Non-toxic Dry-Pac desiccant only Keep moisture out of your gun’s air reservoir! Moisture causes rust and can compromise the integrity of your tank. This is the medium that’s inside the Dry-Pac unit.

Propane Adapter for Airsoft Green Gas Guns $22.74 The TSD Sapien Arms Ver2 Aluminum Propane Adaptor is an excellent, user friendly alternative for gas-powered airsoft products. This trendsetting adaptor features a thread-on cap with loop, silicone oil reservoir, and a texturized body for easy grip feel. The adaptor does not need to be to be detached from the propane tank to apply silicone oil. For airsoft use only. Light silicone oil not included. Users MUST use silicone oil with this product!

TSD Sapien Arms Propane Adapter, Plastic, .25 oz. Silicone Oil $13.14 Sapien Arms propane adapter High-strength ABS plastic Lubricates & cleans Enhances performance Easy-to-locate fluorescent green finish Revolutionary design with silicone oil reservoir Cap-retainer loop Does not need to be detached from propane tank to apply silicone oil Excellent alternative for gas airsoft products Includes .25 oz. light silicone oil For airsoft use only

TSD Sapien Arms Ver2 Aluminum Propane Adapter, Blue $27 The TSD Sapien Arms Ver2 Aluminum Propane Adapter is an excellent, user friendly alternative for gas-powered airsoft products. This trendsetting adapter features a thread-on cap with loop, silicon oil reservoir, and a texturized body for easy grip feel. The adapter does not need to be to be detached from the propane tank to apply silicon oil. For airsoft use only. Light silicon oil not included. Users MUST use silicon oil with this product.

AirForce Shoulder Stock, Fits TalonP Air Pistol $79.8 Shoulder stock Fits AirForce TalonP air pistol Adds 1/4" to 3/3" to length of pull Includes a hex wrench A great accessory for your AirForce Airguns TalonP air pistol. Just add this shoulder stock to convert it to a great little carbine. While this is a solid piece of metal, it doesn’t add much weight to the gun. Easy to attach and remove, this add-on slides over the air tank. Tighten the screws, and you’re ready to go!

TSD Sapien Arms Ver2 Aluminum Propane Adapter, Red $27 The TSD Sapien Arms Ver2 Aluminum Propane Adapter is an excellent, user friendly alternative for gas-powered airsoft products. This trendsetting adapter features a thread-on cap with loop, silicon oil reservoir, and a texturized body for easy grip feel. The adapter does not need to be to be detached from the propane tank to apply silicon oil. For airsoft use only. Light silicon oil not included. Users MUST use silicon oil with this product.

TSD Sapien Arms Ver. 2 Aluminum Propane Adapter, Green $27 The TSD Sapien Arms Ver2 Aluminum Propane Adapter is an excellent, user friendly alternative for gas-powered airsoft products. This trendsetting adapter features a thread-on cap with loop, silicon oil reservoir, and a texturized body for easy grip feel. The adapter does not need to be to be detached from the propane tank to apply silicon oil. For airsoft use only. Light silicon oil not included. Users MUST use silicon oil with this product.

AireTex 45 Gasoline Air Compressor, Max 4500 PSI, Incl. Scuba Yoke & 300 DIN Hose $4314 The compressor may not look exactly like the one shown here. AireTex 45 gasoline air compressor 4500 PSI max working pressure 3-stage, 3-cylinder compressor Stainless steel valves Low-speed operation Stainless steel intercoolers & after-cooler Dual-stage water separator Purifier meets or exceeds CGA G7.1 Grade E and NFPA 1500 standards Mechanical separator removes particles, oil mist & water droplets Suitable for breathing air Purifier chamber rated for 5000 PSI operation Activated carbon removes tastes & odors Catalyst converts carbon monoxide to carbon dioxide Motor overload shutdown Hour meter 15,000 cu. ft. filtration system Includes standard scuba yoke & 300 DIN filler hose AireTex compressors are as durable and reliable as they are portable. This gasoline compressor gives you max 4500 PSI at less than 10 degrees above ambient room temperature! It takes about 23 minutes to fill an 80 cu ft air bottle. Use only for filling scuba tanks and other high-volume devices. Do not connect directly to an airgun reservoir, as it will fill too fast and heat up. When filling air bottles, do not leave the compressor unattended!

Walther Tactical Folding Knife, 3.1" Non-Serrated Silver Blade, Black Handle $23.94 Tactical folding knife 440 stainless steel blade 7.36" open 3.1" non-serrated blade .125" blade thickness 6.40 oz. Thumb stud Open assist Liner lock Aluminum scales Removable pocket clip Glass-breaker on pommel Includes a synthetic pouch Whether you’re looking for a survival knife or just another general-use edged tool, this should fill the bill. This combat folding knife will be useful in so many ways, you’ll wonder how you got along without it. Get one for your range bag, tool box and glove compartment.

S-Thunder BB Shower, Standard Barrel, Blue $71.99 BB shower shell For use with 40mm S-Thunder grenade launchers Compatible with all gas types Holds 80 BBs, 7 x 11mm paintballs or 4 x 17mm paintballs 20-30m effective range Standard barrel Blue 1.57" diameter 4.33" long 0.52 lbs This S-Thunder BB shower shell can be fired using any 40mm S-Thunder grenade launcher or be detonated by hand. You can fill this shell with paintballs, powder balls or BB pellets and operate it with any type of gas ranging from CO2 to green gas. This shower shell gives off a loud and satisfying 78-110dB explosion when triggered.

Phillips Pellet Holder, Long, .177-.20 Cal, Holds 20 Rds, .325" Thick $12.6 Phillips Pellet Holder Holds .177 or .20 cal. pellets 20 pellet slots 2"x6.5" Velcro straps .325" pad thickness Wrap around gun’s tank or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.

Walther Tactical Folding Knife, 3.3" Partially Serrated Blade, Black $23.94 Tactical folding knife 441 stainless steel blade 7.8" open 3.3" partially serrated blade .130" blade thickness 6.40 oz. Thumb stud Open assist Liner lock Aluminum scales Removable pocket clip Glass-breaker on pommel Includes a synthetic pouch Whether you’re looking for a survival knife or just another general-use edged tool, this should fill the bill. This tactical folding knife will comfortably fit in your hand and do whatever comes its way. At this price, you can afford to include one in your glove compartment and your range bag. You’ll wonder how you ever got along without it.

AireTex 45 Electric Air Compressor, Max 4500 PSI, Incl. Scuba Yoke & 300 DIN Hose $4074 AireTex 45 electric air compressor 4500 PSI max working pressure 3-stage, 3-cylinder compressor Stainless steel valves Low-speed operation Stainless steel intercoolers & after-cooler Dual-stage water separator Purifier meets or exceeds CGA G7.1 Grade E and NFPA 1500 standards Mechanical separator removes particles, oil mist & water droplets Suitable for breathing air Purifier chamber rated for 5000 PSI operation Activated carbon removes tastes & odors Catalyst converts carbon monoxide to carbon dioxide Motor overload shutdown Hour meter 15,000 cu. ft. filtration system Requires 220V electrical outlet Includes standard scuba yoke & 300 DIN filler hose The AireTex 45 electric compressor is a top-rated machine that easily fills up scuba tanks and large carbon fiber tanks. The purifier is rated for 50 hours of run time. The compressor outputs 4.20 cubic feet per minute. It runs at 1100 RPM and has over 50 feet of stainless cooling coils. It takes about 23 minutes to fill an 80 cu ft air bottle. Use only for filling scuba tanks and other high-volume devices. Do not connect directly to an airgun, as it fills too fast and heats up. When filling air bottles, do not leave the compressor unattended!