do the red rings of death fix kits they sell on ebay work?

I bought a broken xbox 360 and was wondering if the kits to work on fixing RROD the problem I need to try them because my Microsoft seal is broken and has spent 3 years already

no, no waste of money and Microsoft has a year refer to three of the existence of your XBOX up and see wot they can do for u

After Effects : Silver Ring (KitS)

O-Ring Set – 0099-B Replacement O-rings, 4 $4.5 0099-B replacement O-rings (4) 0099-B O-Ring replacement set for BSA high pressure probes.

O-Ring Set – 0099-W Replacement O-rings, 4 $4.5 O-Ring replacement set for Evanix, FX, Logun and Raider high pressure probes

Sumatra 909 and Shin Sung probe O-ring replacement $3.84 Sumatra 909 and Shin Sung probe O-ring replacement. Please be aware before ordering "O"rings for your Sumatra 909 or Shin Sung rifle, that if it is from 2005 or before it is a thicker "O"ring. After 2005 the "O"ring is thinner. Dimensions: 2005 and earlier OD -.315" ID – .172" H – .074" 4 Pack (enough for two probes)

Quick-Disconnect Male Fitting + O-Ring $23.99 Male quick-disconnect fitting with o-ring Converts Sam Yang, Sumatra & Career rifles to connect to the Benjamin 3-stage hand pump Connects to female quick-disconnect (Quickadap1EM1B), which has 1/8 BSPP threads & fits most scuba tank & hand pump adapter hoses Installation instructions: To start the old fill port turning, insert the round shaft of a phillips screwdriver into the fill port hole and turn the port counterclockwise. Once the port loosens, you can take it off by hand the rest of the way. After you’ve unscrewed your old fill port from the end of your tank, thread in this quick-disconnect fitting & o-ring (included) to seal the connection. No need to depressurize the tank because the tank has a check valve.

Gamo Red Laser Sight, Weaver Ring $42.6 3R Class red laser 3-5mW output 635nm wave length 0 to 2.0mm focus range 10mm beam size at aperture 30mm beam size at nearest focus 11.3mm dot size at 10 yds 50 yds visibility/indoor light 100 yds visibility/outdoor night Black matte finish 5.82 oz. 4.53" long 1.26" high Incl. Weaver ring, two 1.5-volt LR44 batteries, hex wrench set, momentary pressure switch & instruction manual

O-Ring Set – 909 Replacement O-rings, 4 $5.04 Big Bore 909 and Shin Sung probe O-ring replacement. Please be aware that if your Big Bore 909 or Shin Sung rifle was made in or before 2005 you will need this (thicker) replacement O-ring. Dimensions: OD -.315" ID – .112" H – .103" 4 Pack (enough for two probes)

AirForce Edge Flexi-Weight Kit, 1 Weight, 1 O-Ring $8.1 AirForce Edge Flexi-Weight kit Mount on frame or muzzle ext. of an Edge air rifle Redistributes weight for the needs of any shooter O-rings secure the weights Includes 1 weight and 1 o-ring If your AirForce Edge air rifle is used by more than one shooter or you’ve got a shooter who’s growing and needs to adjust the gun’s weight depending on height and growth, then these Flexi-Weights are the ideal way to accommodate change. Rapidly put them on and take them off. Easy to attach additional weights, too. Simply slide on and hold tight with the included o-ring.

IZH 46M Seal & O-Ring Replacements $29.99 IZH 46/46M seals & o-rings Includes 2 breech seals, 2 o-rings & a pump-head seal

Creedmoor Sports 12-36×60 Spotting Scope, Angled Body, Rotating Ring Stand, Table Tripod $89.94 Creedmoor Sports spotting scope 12-36x magnification 60mm objective lens 18mm to 15.4mm eye relief 5.0mm to 1.7mm exit pupil 10m near focus Angled eyepiece Waterproof body Rotating stand ring for fine adjustments 24 oz. Includes table tripod There’s nothing more frustrating than having to stop your shooting to go downrange to see where your shot landed. How much easier is it to look through a fine spotting scope to determine where you’ve hit? Get this Creedmoor Sports spotting scope and shoot more and go downrange less. If you shoot in 10-meter matches, you’ll need one of these to see your shots during competition.

UTG 1" Max Strength Quick Lock Rings, High, Weaver/Picatinny, 4 Hex Screws Per Ring Cap, See-thru $15.48 1" see-thru rings High profile Fits Weaver/Picatinny rails 4 hex screws per ring cap Mount a riflescope of your choice on any Weaver/Picatinny equipped airsoft gun, airgun or firearm. These UTG tactical rings have 4 hex screws that secure your scope while you shoot. The rings have a unique twist lock lever design for quick & easy installation on your gun. Pick up these rings and improve your gun’s accuracy today!

UTG 1" Max Strength Quick Lock Rings, High, Weaver/Picatinny, 6 Hex Screws Per Ring Cap, See-thru $17.4 1" see-thru rings High profile Fits Weaver/Picatinny rails 6 hex screws per ring cap Mount a riflescope on any Weaver/Picatinny equipped airsoft gun, airgun or firearm with these UTG tactical rings! These rings have 6 hex screws that firmly secure your scope while you shoot. Pick these up and improve your gun’s accuracy today!

Birchwood Casey Dirty Bird Targets, 2" & 3" Targets, 180ct $11.99 Dirty Bird targets 2" targets (80) 3" targets (100) Black targets "explode" in color on impact (different color for each target ring + tie-breaking center ring) Indoor/outdoor use Ideal for low-light conditions

JBU 1" Rings, High, Weaver Mount, See-Thru $8.34 Limited Lifetime Warranty 1" rings High profile See-thru mount Fits Weaver dovetail 2 hex screws/ring secure the scope

B-Square 10045 30mm Interlock Fixed Rings, 11mm Dovetail $27.59 30mm rings Fits 11mm dovetail 4 hex screws/ring secure the scope Vertical stop pin Aircraft-grade aluminum Black matte finish

Gamo 1-Pc Mount w/1" Rings, 3/8" Dovetail $23.99 1" rings Fits 3/8" dovetail 4 screws/ring cap secure the scope 3 hex screws secure the base to the gun rail

Centerpoint 1" Weaver/Picatinny Rings, Medium $15.54 1" Weaver/Picatinny rings Medium profile 4 hex screws per ring Mount a scope on your favorite airgun, airsoft gun or firearm with these 1" CenterPoint Weaver/Picatinny rings! Each ring has 4 hex screws that hold your scope firmly in place while you shoot. The base of each ring attaches to any Weaver/Picatinny rail equipped gun with a single large screw. Pick these rings up today!

Leapers 30mm Rings, High, Weaver Mount, See-Thru $11.94 30mm rings Weaver mount High profile See-thru ring mount 4 hex screws/ring secure the scope 1 hex screw secures each ring to the gun Black matte finish Special tape inside the rings keeps your scope tight without excessive clamp pressure!

UTG 1" Max Strength Quick-Detach Rings, Low, Weaver/Picatinny, $17.94 The UTG 1" Max Strength Low Quick-Detach Rings can be efficiently installed and removed on all picatinny rail systems. These high quality tactical rings feature a 4-screw low profile, and are precision machined from aircraft-grade aluminum alloy. Features: 4-screw Low Profile "Tiger" Ring Robust and User Friendly Ergonomic Quick Detach/Lock Lever Anodized Black Matte Finish Max Strength Ring Diameter: 1" Ring Width:18 mm

UTG 1" Max Strength Quick-Detach Rings, Medium, Weaver/Picatinny, See-thru $20.34 The UTG 1" Max Strength Medium Quick-Detach Rings can be efficiently installed and removed on all picatinny rail systems. These high quality tactical rings feature a 6-screw medium profile, and are precision machined from aircraft-grade aluminum alloy. Features: 6-screw Medium Profile "Dragon" Ring Robust and User Friendly Ergonomic Quick Detach/Lock Lever Anodized Black Matte Finish Max Strength See-thru Ring Diameter: 1" Ring Width: 25 mm

1" Quick-Detach Rings, High, Weaver/Picatinny, See-Thru, Law-Enforcement Grade $23.96 1" rings High profile Fits Weaver/Picatinny rail 6 hex screws/ring cap secures the scope Quick-detach base See-thru Law-enforcement grade

1" Quick-Detach Rings, Medium, Weaver/Picatinny, See-Thru, Law-Enforcement Grade $23.96 1" rings Medium profile Fits Weaver/Picatinny rail 4 hex screws/ring secure optics Quick-detach base See-thru Law-enforcement grade

30mm Quick-Detach Rings, High, Weaver/Picatinny, See-Thru, Compact, Law-Enforcement Grade $23.96 30mm rings High profile Fits Weaver/Picatinny rail 4 hex screws/ring to secure scope Quick-detach base See-thru Law-enforcement grade

30mm Quick-Detach Rings, Medium, Weaver/Picatinny, See-Thru, Compact, Law-Enforcement Grade $23.96 30mm rings Medium profile Fits Weaver/Picatinny rail 4 hex screws/ring to secure scope Quick-detach base See-thru Law-enforcement grade

CenterPoint 1-Pc Mount, 1" Rings, Medium, 3/8" Dovetail, 4 Screws/Cap $14.34 1" rings 1-pc mount Medium profile Fits 3/8" dovetail 4 screws/ring cap 3 hex screws secure the base This 1-pc mount will secure your scope firmly to your gun. The mount fits a 3/8" dovetail and has 3 hex screws on the base. Each ring has 4 hex screws per cap.

Leapers 30mm Rings, Medium, Weaver Mount, See-Thru $10.74 30mm rings Weaver mount Medium profile See-thru mount 4 hex screws/ring secure the scope 1 hex screw secures each ring to the gun Black matte finish Special tape inside the rings keeps your scope tight without excessive clamp pressure!

UTG 30mm Max Strength Rings, Low, Weaver/Picatinny, See-Thru, Twist-Lock Base $17.94 30mm rings Low profile Fits Weaver/Picatinny rail 4 screws/ring cap secures your scope See-thru Black matte finish Twist-Lock base screw to rapidly mount and dismount These UTG rings make it easier to quickly mount and dismount your optical devices on different guns. Instead of working with several hex screws on each ring base, you just have to hand-tighten one twist-lock base screw on each ring and you’re good to go. Also, the weight has been reduced by channeling out the center of each cap. Use on any air gun, airsoft gun or firearm that has a Weaver or Picatinny rail. The cross-slots help stabilize the rings so your scope or dot sight is rock-solid.

UTG 30mm Quick-Detach Max Strength Rings, Medium, Weaver/Picatinny, See-Thru $21.54 30mm rings Medium profile Fits Weaver/Picatinny rail 6 hex screws per ring secure your scope Quick-detach lever on each ring for quick attachment & removal See-thru Special tape inside the rings keeps your scope tight without excessive clamp pressure! Aircraft-grade aluminum is just one of the things that makes this Leapers UTG scope mount different from all the others. The see-thru saddle plus the open architecture cap lightens the weight of the rings even more. One of the best features is the quick-detach lever lock on the side of each ring. Just pop the lever to remove your mount from a gun and simply push it back down to attach it to your gun.

Beeman 5030M 1" Rings, Medium, 9.5-11.5mm Dovetail $45.54 1" rings Medium profile Fits 9.5-11.5mm dovetail 4 hex screws/ring secure the scope Vertical scope stop pin (removable) The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Beeman 5031 30mm Rings, High, 9.5-11.5mm Dovetail $69.54 30mm rings High profile Fits 9.5-11.5mm dovetail 4 hex screws/ring to secure scope Vertical scope stop pin (removable) The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Beeman 5036 1-Pc Mount w/1" Rings, High, 9.5-11.5mm Dovetail $79.14 1" rings High profile Fits 9.5-11.5mm dovetail 4 hex screws/ring secure the scope The hex screws on the base let you adjust the base to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

UTG Leapers Premium 1" Rings, High, Weaver Mount, See-Thru $14.34 Limited Lifetime Warranty 1" rings High profile See-thru mount Fits Weaver dovetail 4 hex screws/ring secure the scope Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Beeman 5030H 1" Rings, High, 9.5-11.5mm Dovetail $45.54 1" rings High profile Fits 9.5-11.5mm dovetail 4 hex screws/ring secure the scope Vertical scope stop pin (removable) The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Centerpoint 1" Rings, Medium, 3/8" Dovetail $14.39 1" rings Medium profile Fits 3/8" dovetail 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers 30mm Rings, High, 3/8" Dovetail $11.99 Limited Lifetime Warranty 30mm rings High profile Fits 3/8" dovetail 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

AirForce 1" Rings, Medium, 9.5-13.5mm Dovetail $24 1" rings Medium profile Fits 9.5 mm-13mm dovetails 4 hex screws/ring to secure the scope Vertical scope stop The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Leapers 30mm Rings, Medium, 3/8" Dovetail $11.99 30mm rings Medium profile Fits 3/8" dovetail 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1" Rings, Medium, 3/8" Dovetail, 4 Screws/Cap $11.99 1" rings Medium profile Fits 3/8" dovetail 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Premium 1" Rings, Medium, Weaver Mount, See-Thru $11.99 Limited Lifetime Warranty 1" rings Medium profile See-thru mount Fits Weaver dovetail 4 hex screws/ring secure the scope Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Sports Match 30mm Rings, Extra-High, Adjustable, 9.5-11mm Dovetail $71.99 30mm rings Extra-high profile Fits 9.5mm to 11mm dovetail 4 hex screws per ring cap Removable scope-stop pin Adjustable for height & elevation Sports Match mounts have an excellent reputation for quality and strength. The adjustable height feature is a nice feature not found on most airgun mounts.

Walther 4×32 Rifle Scope, Duplex Reticle, 1" Tube, 11mm Rings $33.59 Full-size rifle scope 4x magnification 32mm objective lens (adjustable objective) 1" tube Duplex reticle 3" eye relief 11.5" long 15 oz. Includes 11mm rings (4 screws per ring cap) & lens covers w/amber lens

Leapers Accushot 1-Pc Bi-directional Offset Mount w/1" Rings, High, 11mm Dovetail $15.54 1-piece bi-directional offset mount 1" rings w/scope stop 11mm dovetail High profile 4 hex screws/ring 2 hex screws on base Mount in either direction 62mm integral base length 18mm wide 21mm saddle height Aircraft-grade aluminum

Leapers Accushot 1-Pc Mount w/1" Rings, 3/8" Dovetail $17.94 1" rings Medium profile Fits 3/8" dovetail 100mm base length 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Mount w/1" Rings, High, 11mm Dovetail $21.54 1" rings High profile Fits 11mm dovetail 4 hex screws/ring secure the scope 100mm base length 80mm between rings Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Mount w/30mm Rings, High, 11mm Dovetail $17.94 Limited Lifetime Warranty 30mm rings High profile Fits 11mm dovetail 4 hex screws/ring secure scope 100mm base length Vertical stop pinSpecial tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Mount w/30mm Rings, Medium, 3/8" Dovetail $17.34 30mm rings Medium profile Fits 3/8" dovetail 100mm base length 3 hex screws/ring secure the scope Vertical stop pin Limited lifetime warranty Special tape inside the rings keeps your scope tight without excessive clamp pressure!

RWS Lock Down 1-Pc Mount w/1" Rings, 11mm Dovetail, Barrel Droop Compensation $33.54 1" rings Fits 11mm dovetail 2 hex screws per ring 4 hex screws secure base to scope rail 2 recoil stop pins .025" elevation compensates for barrel droop Made of aircraft-grade aluminum Includes hex wrench Black matte

RWS Lock Down 1-Pc Mount w/30mm Rings, 11mm Dovetail, Barrel Droop Compensation $33.54 30mm rings Fits 11mm dovetail 2 hex screws per ring 4 hex screws secure base to scope rail 2 recoil stop pins .025" elevation compensates for barrel droop Made of aircraft-grade aluminum Includes hex wrench Black matte

CenterPoint 1" Rings, High, Weaver/Picatinny $15.54 1" rings High profile Fits Weaver/Picatinny rail 4 hex screws/ring secure the scope Mount an accessory of your choice on your favorite gun. These tactical rings by CenterPoint fit 1" scope tubes and mount on a Weaver/Picatinny rail.

Air Venturi Thread Converter + Hose $29.99 Hose + adapter for AirForce Airguns scuba tank & hand pump One end has 1/4 BSPP male threads to fit the female threads of the AirForce scuba tank adapter or AirForce hand pump The other end has 1/8 BSPP female threads & fits the hose with 1/8 BSPP male threads Hose ends in 1/8 BSPP female thread for use with 1/8 BSPP filling adapters or our female quick-disconnect coupling Includes flexible hose & 2 O-rings (wide rubber O-ring is used with AirForce 3-stage hand pump; bonded metal O-ring is used with AirForce scuba tank adapter)

UTG 1" Rings, Low, Weaver/Picatinny, Quick Lock $15.54 1" rings Low profile Fits Weaver/Picatinny rail 4 screws per ring cap Quick lock Includes 3mm hex wrench Special tape inside the rings keeps your scope tight without excessive clamp pressure. Quickly attach/remove these rings from your gun…no tools required! Just twist the hand-tightened knob, and the ring is ready to come off (or go on). Buy a bunch of these, keep your scopes in rings and easily move them from one gun to another.

UTG 30mm Quick-Detach Max Strength Rings, Low, Weaver/Picatinny $19.14 30mm rings Low profile Fits Weaver/Picatinny rail 4 hex screws per ring secure your scope Quick-detach lever on each ring for quick attachment & removal Special tape inside the rings keeps your scope tight without excessive clamp pressure! Leapers UTG 30mm Quick-Detach rings can be quickly installed on or removed from your Weaver/Picatinny rail system. They feature 4-screw caps, low profile and are precision-machined from aircraft-grade aluminum alloy, but steel is used for all the bearing surfaces and the key. By creating an open cap top, the mounts are lighter than similar mounts with a closed cap.

BSA Optics Illuminated Red/Green/Blue Dot Sight, Laser & Flashlight, Weaver Mount $163.19 BSA illuminated dot sight Objective ring twists to adjust brightness Red, green or blue dot 30mm objective lens Integral Weaver mount 68′ field of view @ 100 yds 50 yds parallax setting Unlimited eye relief 1/2 MOA (1/2" click value @ 100 yds) 45-45 adjustment range 30mm exit pupil 5 oz. 5.4" long 75mm long integral Weaver mount Matte black finish Includes metallic gift box, flashlight & laser A unique optical sight! The illuminated dot sight gives you a choice of 3 colors and the objective ring is the rheostat…which works similar to a camera lens. Shine the light of day on your target with the accompanying laser and flashlight.

Smith & Wesson Search & Rescue Knife, 5.88" Non-Serrated Clip Point Blade, Fixed $35.94 Don’t go out in the field without this survival/hunting knife. It’s big, it’s bold, it’s sharp & it’s there when you need it. S&W Search & Rescue knife 5.8" fixed clip point blade 440 stainless steel Blood groove Non-reflective black finish Rubberized aluminum handle with grooves and butt cap Metal guard Includes heavy-duty nylon sheath with Velcro close, D-ring and lashing slots 10.50" overall 7.4 oz.

UTG Airsoft Silicone Spray, 50ml $5.7 Maintain the reliability of your airsoft gun with UTG Airsoft Silicone Spray . This compact 50ml spray bottle is convenient to carry in the battlefield, and will protect your gun against corrosion and jamming during intense airsoft skirmish operations. Silicone oil spray can be used in machinery parts, gear, o-ring, tools, and plastic parts. Take aim and fire! We can not ship UTG Airsoft Silicone Spray using air services. Please consider this when you choose a shipping method.

AirForce Adaptive Rear Target Sight, Fits Most 10-Meter 3-Position Rifles & All AirForce Guns $164.34 Adaptive rear target sight Fits most 10-meter 3-position rifles & all AirForce guns Large amount of vertical adjustment Fits 11mm airgun rail Has 1/8 MOA click adjustment knobs & can be reset to zero Can be removed from its mounting base & clamped into a 1" scope ring Made in America

CenterPoint 1-Pc Off-Set Mount, 1" Rings, High, 3/8" Dovetail, 4 Screws/Cap $15.54 1" rings 1-pc off-set mount High profile Fits 3/8" dovetail 4 screws/ring cap 2 hex screws secure the base Attach a scope to your favorite airgun, airsoft gun or rimfire with this 1-pc off-set mount. The mount fits a 3/8" dovetail and has 2 hex screws on the base. The rings have 4 hex screws per cap that hold your scope solidly in place.

BKL 12-Way Scope Bubble Level, Fits 1" dia. Scope Tube $39.9 12-way scope bubble level Fits 1" dia. scope tube Easy installation This 12-way folding scope level by BKL is easy to install and eliminates cant. Position the level above, below or off to the side depending on your needs. By eliminating cant, your accuracy will improve. Included ring fits any 1" scope tube. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

Benjamin ASA Adapter, Connects Bulk CO2 Tanks to Benjamin Dual-Fuel Guns $21.59 ASA adapter Connects bulk-fill CO2 tanks to Benjamin & Crosman Dual-Fuel guns Screws into CO2 fill station or lever-fill station Includes o-ring & 1/8-inch threaded connection to attach to quick-disconnect fittings Connect your Crosman or Benjamin Dual-Fuel gun to a bulk-fill CO2 tank for more shots per fill.

Hill Hand Pump Micron Filter Replacement $9.59 Micron filter replacement Fits all Hill hand pumps Easy to replace Instructions: Unscrew the hexagonal connector on top of the base housing (to remove pump) Remove the filter from its seat in the bottom of the housing Place the replacement filter into the housing Replace the o-ring, if needed Reattach the pump and tighten the hexagonal connector Maintain your Hill hand pump, and it’ll always be reliable. Replacing the filter is essential for proper functioning of the pump.

AirForce Adaptive Target Sight Set, Fits Most 10-Meter 3-Position Rifles & All AirForce Guns $205.2 Adaptive target sight set (front & rear sights included) Fits most 10-meter 3-position rifles & All AirForce guns Front sight accepts standard European aperture inserts (not included) Both sights have large amount of vertical adjustment Rear sight fits 11mm airgun rail Rear sight has 1/8 MOA click adjustment knobs & can be reset to zero Rear sight can be removed from its mounting base & clamped into a 1" scope ring Made in America

B-Square 17401 Interlock Adjustable AA 1-Pc Mount w/1" Rings, 11.7mm Dovetail, Fits Webley Patriot $69.54 Specially designed with 2 crossbars to fit the grooves of Webley rifles, including the Patriot. 1" rings Fits 11.7mm dovetail on the Webley Patriot Extra-long base Windage/elevation adjustments 4 hex screws/ring secure the scope Vertical stop pin Gimbel action eliminates scope stress Black matte finish

Beeman 5039 1-Pc Adjustable Mount w/1" Rings, High, 9.5-11mm Dovetail $90.6 1" rings High profile Fits 9.5-11.5mm dovetail 4 hex screws/ring to secure scope Adjustable for windage & elevation Ideal for guns that need additional scope elevation The hex screws on the base let you adjust the base to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Beeman 5040 1-Pc Mount w/1" Rings, Medium, 9.5-11.5mm Dovetail $79.14 1" rings Medium profile Fits 11mm dovetail 4 hex screws/ring secure the scope Vertical scope stop pin (removable) Black matte finish Thehex screws on the base let you adjust the base to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

UTG 38" Deluxe Tactical Gun Case, Black $41.94 38"x12" 5 outer mag/accessory pockets w/Velcro close Heavy-duty, water-resistant shell Over 1" padding on each side Reinforced thread, stitching & edging Tough nose & back support D-ring Heavy-duty, lockable #10 zipper Name tag window Wraparound carry handle & shoulder strap

AirForce 1" Rings, High, 9.5-13.5mm Dovetail, See-Thru $24 1" rings High profile Fits 9.5 mm to 13mm dovetail See-thru mount Dual-position clamping system Threaded vertical recoil stop pin 4 hex screws/ring for securing scope Twice the clamping area of many conventional mounts Superior scope retention The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Leapers Accushot 1-Pc Bi-directional Offset Mount w/30mm Rings, High, 11mm Dovetail $16.79 1-piece bi-directional offset mount 30mm rings w/scope stop 11mm dovetail High profile 4 hex screws/ring 2 hex screws on base Mount in either direction 67mm integral base length 18mm wide 21mm saddle height Aircraft-grade aluminum Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Sports Match 1" Rings, High, Adjustable, 9.5-11mm Dovetail $103.19 1" rings High profile Fits 9.5mm to 11mm dovetail 4 hex screws per ring cap No scope-stop pin Adjustable for windage, elevation and height It’s rare to find so many features in scope rings, but these Sports Match rings have them! Your scope will be useful for more air rifles because these mounts can be adjusted in so many ways. No scope-stop pin, so don’t use this on powerful or heavy-recoiling spring-piston air rifles.

CenterPoint 1-Pc Mount, 1" Rings, High, 3/8" Dovetail, 4 Screws/Cap $14.34 1" rings 1-pc mount High profile Fits 3/8" dovetail 4 screws/ring cap 3 hex screws secure the base Whether you hunt, target shoot or casually plink in your backyard, this 1-pc mount will secure your scope firmly to your gun. The mount fits a 3/8" dovetail with 3 hex screws. The rings have 4 hex screws per cap.

Leapers Accushot 1" Rings w/Deluxe Tactical Tri-Rail, 3/8" Dovetail $31.14 Fits 3/8" dovetail 1" rings Provides 3 Weaver/Picatinny rails for accessories 4 screws/ring secures the mount Optimized rail spacing for stable, adequate mounting Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Model 4/15 Scope Mount, Fits Carry Handle $21.54 Weaver mount Fits Model 4/15 carry handle 1" rings 3 adjustable mounting positions for flexible eye relief positioning Flattop adapter with 2 thumbscrews & clamping plate 4 screws per ring cap Made of aircraft-grade aluminum Tight tolerances create a solid fit for extreme tactical environments

Tech Force 1-Pc Mount, 1" Rings, 11mm Dovetail, See-Thru $15.54 1" rings Medium profile Fits 11mm dovetail See-thru base 4 hex screws/ring secure the scope Includes 2 hex wrenches The Tech Force mount is an economical one that will work on any gun that has an 11mm base or dovetail. Since it has 4 screws per cap, it’ll hold your scope tight, even on magnum spring air rifles.

CenterPoint 1" Rings, High, 3/8" Dovetail $15.54 1" rings High profile Fits 3/8" dovetail 4 hex screws/ring secure the scope These high-profile rings fit 1" scope tubes and are held in place by 4 hex screws that secure your scope firmly while you shoot. These rings can be mounted on all guns equipped with a 3/8" dovetail.

Hawke Sport Optics Airmax EV 4-12x50AO Rifle Scope, Map 6 Reticle, 1/4 MOA, 1" Tube $191.99 Rifle scope 4-12x magnification 50mm objective lens (adjustable objective) 1" tube 1/4 MOA (1/4" click value @ 100 yds) MAP 6 reticle (Multi-Aim-Point) 15 yds to infinity parallax adjustment 33′ to 11′ field of view @ 100 yds 3.2" eye relief 18.7 oz. 13" long Incl. flip-open lens caps & all weather zoom ring Other Features: Fast focus eyebell Black matte finish Spring-gun Rated Waterproof Shockproof Fogproof Improve the accuracy of your airgun with this rifle scope by Hawke Sport Optics. This scope has the MAP 6 reticle & HD optical system and is part of Hawke’s Airmax EV series. This scope has an all weather zoom ring and is shockproof, fogproof and waterproof allowing it perform reliably in adverse weather conditions. Pick one up for your favorite airgun!

BKL 12-Way Folding Scope Level, Fits 30mm dia. Scope Tube $39.9 12-way scope bubble level Fits 30mm dia. scope tube Easy installation Eliminate cant with BKL’s 12-way scope bubble level. Position the level above, below or off to the side depending on your needs. Reference the level before taking your shot, reposition your gun so it’s level and then shoot. You should see a difference in accuracy, as a canted gun is not accurate. Included ring fits any 30mm scope tube. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

NcStar 1×30 Red/Green Dot Sight, 1 MOA, 30mm Tube, Weaver/Picatinny Cantilever Mount $44.34 Red/green dot sight 1x magnification 30mm objective lens diameter 1 MOA (1" click value @ 100 yds) 3 MOA dot size Unlimited eye relief 11.3 oz. 4.35" long Incl. Weaver/Picatinny cantilever mount & flip-open lens caps Other features: Rheostat with 5 brightness settings for each dot color Black anodized aluminum construction The mount on this NcStar dot sight is 3 inches high. It quickly mounts and unmounts with one knurled knob on the base. The single ring has 4 cap screws to secure the sight. Use on air guns, airsoft guns and firearms.

AirForce Edge Flexi-Weight Kit, 5 Weights, 5 O-Rings $35.4 AirForce Edge Flexi-Weight kit Mount on frame or muzzle ext. of an Edge air rifle Redistributes weight for the needs of any shooter O-rings secure the weights Includes 5 weights and 5 o-rings If your AirForce Edge air rifle is used by more than one shooter or you’ve got a shooter who’s growing and needs to adjust the gun’s weight depending on height and growth, then these Flexi-Weights are the ideal way to accommodate change. Rapidly put them on and take them off. Easy to attach additional weights, too. Simply slide on and hold tight with the included o-ring. This economical 5-weight kit is ideal for clubs.

UTG 5 High Combat-Quality Foregrip, Aluminum, Matte Black $31.14 Leapers UTG 5 High foregrip Combat-quality Textured surface Weaver/Picatinny clamp-on mounting deck Tool-free, user-friendly installation Quick-detach locking nut is spring-tensioned Waterproof o-ring on end cap 2.7" interior storage space Anodized aircraft-grade aluminum Matte black finish 5" high 8.7 oz. This high-quality Leapers UTG foregrip will fit airguns, airsoft guns and firearms with a forward Weaver/Picatinny rail. A foregrip adds stability, which will deliver increased accuracy.

Foregrip, Low Profile, Lever Lock, Fits Weaver/Picatinny Rail $35.94 Leapers UTG foregrip Low profile Lever lock Fits any Weaver/Picatinny rail Quick-detach adj. lever Waterproof O-ring on end cap protects storage area Aircraft-grade aluminum alloy Folds and locks in 2 positions Spring-tensioned Posi-lock Easy installation 1.04 cu in storage space 4.6" high 9.7 oz. Incl. hex wrench Attach this Leapers foregrip to any airgun, firearm or airsoft gun that has a Weaver/Picatinny rail. Secure it in seconds. Folds out of the way when you don’t need it. Sturdy, durable, useful.

Laser Genetics ND3x40 Laser Designator, 1" Tube, 3 Mounts $431.94 Laser Genetics ND3x40 Laser Designator Functions well in temperatures 40-deg. F or warmer Green laser with Rotary Optical Collimator* 40x magnification Adjustable beam diameter & intensity Micro-beam is visible up to 3 miles Wider beam illuminates trails or "paints" targets up to 400 yds away Water-resistant Nitrogen-filled to prevent fogging (o-ring sealed) 532nm laser 40mW output Class 2M Uses 2 CR123V lithium batteries 1" tube 9.45" long 2" dia. lens 12 oz. Fully multi-coated lenses Made of high-tech aluminum Anodized matte black finish Includes two 3V CR123A batteries, Weaver ring, tripod mount,1" scope mount with adj. windage & elevation, remote momentary pressure switch, cleaning kit, hex wrench, lens cap & padded case *The patented Rotary Optical Collimator uses a system of 9 fully multi-coated lenses that allow full adjustment and control of the beam diameter and intensity to focus light where it’s needed most. Rotating the collimator ring to minimum creates a bright micro-beam green laser light visible up to 3 miles. Rotating the collimator to more open settings provides plenty of illumination to light a trail at night or �paint" a target up to 400 yds. away. Attention: Do not stare directly into the laser beam or view directly with optical instruments. Viewing the laser light or a bright reflection may cause eye injury.

Laser Genetics ND3x40 Subzero Laser Designator, 1" Tube, 3 Mounts $515.94 Laser Genetics ND3x40 Laser Designator Functions well in temperatures 40-deg. F or colder Green laser with Rotary Optical Collimator* 40x magnification Adjustable beam diameter & intensity Micro-beam is visible up to 3 miles Wider beam illuminates trails or "paints" targets up to 400 yds away Water-resistant Nitrogen-filled to prevent fogging (o-ring sealed) 532nm laser 40mW output Class 2M Uses 2 CR123V lithium batteries 1" tube 10" long 2" dia. lens 12.18 oz. Fully multi-coated lenses Made of high-tech aluminum Anodized matte black finish Includes two 3V CR123A batteries, Weaver ring, tripod mount,1" scope mount with adj. windage & elevation, remote momentary pressure switch, cleaning kit, hex wrench, lens cap & padded case *The patented Rotary Optical Collimator uses a system of 9 fully multi-coated lenses that allow full adjustment and control of the beam diameter and intensity to focus light where it’s needed most. Rotating the collimator ring to minimum creates a bright micro-beam green laser light visible up to 3 miles. Rotating the collimator to more open settings provides plenty of illumination to light a trail at night or �paint" a target up to 400 yds. away. Attention: Do not stare directly into the laser beam or view directly with optical instruments. Viewing the laser light or a bright reflection may cause eye injury.

Laser Genetics ND3 Subzero Laser Designator, 1" Tube, 3 Mounts $359.99 Laser Genetics ND3 Subzero Laser Designator Functions well in temperatures 40-deg. F or colder Green laser with Rotary Optical Collimator* Adjustable beam diameter & intensity Micro-beam is visible up to 3 miles Wider beam illuminates trails or "paints" targets up to 250 yds away Water-resistant Nitrogen-filled to prevent fogging (o-ring sealed) 532nm laser 18mW output Class 2M Uses 1 CR123V lithium battery 1" tube 6.75" long 1.25" dia. lens 5.37 oz. Fully multi-coated lenses Made of high-tech aluminum Anodized matte black finish Includes one CR123A lithium battery, Weaver ring, binocular/spotting scope mount (9.2mm to 6mm long, 1.25mm threads), scope mount, remote momentary pressure switch, cleaning kit, hex wrench, lens cap & padded case *The patented Rotary Optical Collimator uses a system of 9 fully multi-coated lenses that allow full adjustment and control of the beam diameter and intensity to focus light where it’s needed most. Rotating the collimator ring to minimum creates a bright micro-beam green laser light visible up to 3 miles. Rotating the collimator to more open settings provides plenty of illumination to light a trail at night or �paint" a target up to 250 yds. away. Do not stare directly into the laser beam or view directly with optical instruments. Viewing the laser light or a bright reflection may cause eye injury.

BKL 1-Pc Adjustable Scope Mount, 1" Rings, 3/8" Dovetail, Black $79.8 1-pc scope mount 3/8" dovetail Low profile 1" rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8" side rails for mounting other accessories 2.5" of clamping length 4" overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz. 6 base screws Matte black Includes 3 hex wrenches Got barrel droop? This new mount will help you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails offer more space to add a laser and a flashlight to augment a scope.

BKL 1-Pc Adjustable Scope Mount, 30mm Rings, 3/8" Dovetail, Black $79.8 1-pc scope mount 3/8" dovetail Low profile 30mm rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8" side rails for mounting other accessories 2.5" of clamping length 4" overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz. 6 base screws Matte black Includes 3 hex wrenches Got barrel droop? This BKL Tech mount lets you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails give you room to mount a laser and flashlight.

UTG DC Series Tactical Gun Case, 42" Long, Black $45.59 UTG tactical gun case Synthetic leather material 5 magazine/accessory pockets w/ Velcro close See-through name tag holder Water-resistant PVC shell Heavy-duty dual zippers D-ring for hanging 1" padding on all sides 1.5" reinforced wraparound carry handle 1.5" adjustable web shoulder strap 42"x12" Black This tactical gun case by UTG is great for transporting airguns, airsoft guns & firearms with ease. The synthetic leather material and 1" thick padding will protect your gun from wear and tear & the water-resistant PVC shell will shield your gun from adverse weather conditions.

Evanix 4×32 Hellfire Rifle Scope & Laser, Circle Duplex Reticle w/Mil-Dots, 1/4 MOA, 11mm Mount $239.99 Rifle scope & Class II laser 4x magnification 32mm objective lens 1/4 MOA (1/4" click value @ 100 yds Circle duplex reticle w/mil-dots 5" long w/out sunshade, 6.6" long with sunshade Uses 3 LR44 or AG13 batteries Includes lens cover, 11mm ring, 2 hex wrenches, cleaning cloth and laser with remote pressure switch This compact scope and laser combo will come in handy when you’re hunting with your air rifle or rimfire gun and need extra help pinpointing your quarry. Note: The manual shows a mount with 3 thumbscrews, but the mount that comes with this scope has only 2 thumbscrews. It also states that the mount fits either Weaver or 11mm dovetails. It does not. It fis only 11mm dovetails.

UTG Deluxe Universal Horizontal Shoulder Holster $14.39 High quality and very cleverly designed shoulder holster with loaded features. Universal design to fit most popular auto pistols and revolvers. Modular design allows for both left and right handed use. Each ring includes a padded shoulder harness, and a holster with soft lining to protect guns and two mag pouches. All components are fully adjustable with Velcro straps attached to web belt for holster/pouch tension. Tactical design to keep gun in ready position and still out of the way. Holster Dimensions: Length: 8 inches Width: 4 inches – 2.5 inches For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a length that is greater than or equal to the length of the holster.

UTG Deluxe Universal Horizontal Shoulder Holster, Army Digital Camo $14.39 Melt into the environment…GO DIGITAL! UTG Digital Patterned Tactical Armor – Blend in stealthily and yet stand tall, presenting the most professional image! High quality and very cleverly designed shoulder holster with loaded features. Universal design to fit most popular auto pistols and revolvers. Modular design allows for both left and right handed use. Each ring includes a padded shoulder harness, and a holster with soft lining to protect guns and two mag pouches. All components are fully adjustable with Velcro straps attached to web belt for holster/pouch tension. Tactical design to keep gun in ready position and still out of the way. Holster Dimensions: Length: 8 inches Width: 4 inches – 2.5 inches For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a length that is greater than or equal to the length of the holster.

UTG Deluxe Universal Horizontal Shoulder Holster, Woodland Digital Camo $14.39 Melt into the environment…GO DIGITAL! UTG Digital Patterned Tactical Armor – Blend in stealthily and yet stand tall, presenting the most professional image! High quality and very cleverly designed shoulder holster with loaded features. Universal design to fit most popular auto pistols and revolvers. Modular design allows for both left and right handed use. Each ring includes a padded shoulder harness, and a holster with soft lining to protect guns and two mag pouches. All components are fully adjustable with Velcro straps attached to web belt for holster/pouch tension. Tactical design to keep gun in ready position and still out of the way. Holster Dimensions: Length: 8 inches Width: 4 inches – 2.5 inches For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a length that is greater than or equal to the length of the holster.

UTG 5th Gen 4-16x40AO Rifle Scope, Illuminated Mil-Dot Reticle, 1/4 MOA, 1" Tube, Weaver Rings $83.99 Rifle scope 4-16x magnification 40mm objective lens (adjustable objective) Emerald coated lenses to achieve maximum light transmission for best clarity 1" tube 1/4 MOA (1/4" click value @ 100 yds) Mil-dot reticle (red-green illuminated) 5 yds to infinity parallax adjustment 23 ft to 5.8 ft field of view @ 100 yds 3.2 inches to 3 inches eye relief 10mm to 2.5mm exit pupil 20.1 oz. 14.37" long Includes flip-open lens covers, Weaver/Picatinny rings w/4 screws per ring cap, Allen wrench, CR2032 3-v high-energy lithium battery, hex screw, cleaning cloth, manual and mil-dot chart Other features: True Strength scope Nitrogen-filled Shockproof Fogproof Rainproof Zero lock/reset Target turrets

CenterPoint 4x32mm Compact Crossbow 5-Line Multi-Reticle Sight, 1/4 MOA, 1" Tube, 1-Pc Weaver Mount $107.99 Compact crossbow dot sight 4x magnification 32mm objective lens (angled objective) 1" tube 1/4 MOA (1/4" click value @ 100 yds) 5-Range reticle w/various brightness settings (red-greem illuminated) 28′ field of view @ 100 yds 3" eye relief 6mm exit pupil 12.3 oz 8.25" long Includes 1-pc Weaver mount, two 3V CR1620 batteries & flip-open lens caps Other features: Nitrogen-filled Shockproof Fogproof Waterproof Finger-adjustable windage/elevation Multi-coated lenses reduce glare, optimize light transmission 4 hex screws per ring cap to secure sight

UTG Xenon IRB Flashlight and Red Laser, 3 Functions, 16-Position Laser, Weaver Mount, Handheld $65.94 Xenon flashlight and laser combo 16-position adjustable/removable precision red laser (360-deg. position rotation) 3-function flashlight: on, off, momentary 23mm xenon IRB flashlight bulb Push-button momentary flashlight Twist-on switch flashlight 6V flashlight 126 max lumens flashlight 70 mins. max battery operating time 80cm @ 10m laser beam movement 3R class laser 2.5-3.1mW laser output power 630-640nm laser wavelength 15-20mm @ 15m laser beam diameter 14-deg. F to 113-deg. F laser operating temp. 80 mins. max laser battery operating time 6000 hrs laser lifetime 1.07" diameter 7" long 7.5 oz. (flashlight, laser & batteries) Aluminum body Incl. 2 CR123A batteries, 4 LR44 button batteries, remote pressure switches, slotted wrench, Allen wrench, 16-position rotating ring mount for laser & Weaver mount flashlight This is an extremely versatile setup. The flashlight and laser can be separated, so you can hold the flashlight, too. Mount just the flashlight to your gun or put the laser on it, too. No matter how you mount the flashlight, the laser’s mount rotates around the flashlight’s body so you can position it anywhere.

Hawke Sport Optics 4.5-14x38AO Sidewinder Rifle Scope, Illuminated SR6 Reticle, 1/4 MOA, 30mm Tube $467.99 Rifle scope 4.5-14x magnification 38mm objective lens (adjustable objective) 30mm tube 1/4 MOA (1/4" click value @ 100 yds) SR6 reticle (red-green illuminated) 10 yds to infinity parallax adjustment 8.46 yds to 2.21 yds field of view @ 100 yds 3.9" to 3.4" eye relief 26.3 oz. 13.3" long Includes 2" sidewheel, 4" sunshade, non-slip zoom ring and foam-filled/lockable hard case Other features: Nitrogen-filled Shockproof Fogproof Waterproof 5 levels of brightness for dawn, daytime & dusk This is a very capable hunting scope. Hawke Sport Optics is known for high-quality optics and solid scopes. Whether you’re hunting buffalo or shooting squirrels, you’d be hard-pressed to find a better scope! If you take pride in seeing what you’re shooting, then this is the scope for you! The SR6 reticle was developed for Hawke by British field target shooter Nick Jenkinson, a world champion.

Hawke Sport Optics 6.5-20x42AO Sidewinder Tactical Rifle Scope, Illuminated Half Mil-Dot Reticle, 1/4 MOA, 30mm Tube $515.99 Rifle scope 6.5-20x magnification 42mm objective lens (adjustable objective) 30mm tube 1/4 MOA (1/4" click value @ 100 yds) Half mil-dot reticle (red-green illuminated) 10 yds to infinity parallax adjustment 4.9m to 1.5m field of view @ 100 meters 3.5" eye relief 27.5 oz. 15.3" long Includes 2" sidewheel, 4" sunshade, non-slip zoom ring and foam-filled/lockable hard case Other features: Nitrogen-filled Shockproof Fogproof Waterproof 5 levels of brightness for dawn, daytime & dusk Hawke Sport Optics has already gained a wide following in England, Australia and other countries. Now, American’s are starting to see why Hawke scopes have been so popular elsewhere. Their optics are clear and bright. Whether you’re hunting coyotes, dispatching pest squirrels or plinking at the range, this Hawke scope will surpass your expectations.

Hawke Sport Optics Airmax EV 3-9x40AO Rifle Scope, Map 6 Reticle, 1/4 MOA, 1" Tube $155.99 Rifle scope 3-9x magnification 40mm objective lens (adjustable objective) 1" matte black mono tube 1/4 MOA (1/4" click value @ 100 yds) Map 6 reticle 10 yds to infinity parallax adjustment 44.1′ to 14.7′ field of view @ 100 yds 3.2" eye relief 16 oz. 12.30" long Incl. flip-open lens caps & all weather zoom ring Other Features: Fast focus eyebell Black matte finish Spring-gun rated Waterproof Shockproof Fogproof Whether you target shoot professionally or plink for fun in your backyard Hawke Sport Optics rifle scopes are great for improving the accuracy of air guns & air rifles. This scope is part of Hawke’s Airmax EV series and is capable of giving you an extra 20% field of view compared with standard rifle scopes. The MAP 6 Multi-Aim-Point reticle is also calibrated to work with nearly any rifle trajectory. Pick one up for your favorite airgun or air rifle today!

Hawke Sport Optics Airmax EV 3-9x50AO Rifle Scope, MAP 6 Reticle, 1/4" MOA, 1" Tube $179.99 Rifle scope 3-9x magnification 50mm objective lens (adjustable objective) 1" tube 1/4 MOA (1/4" click value @ 100 yds) MAP 6 reticle (Multi-Aim-Point) 15 yds to infinity parallax adjustment 44.1′ to 14.7′ field of view @ 100 yds 3.2" eye relief 18.4 oz. 12.6" long Incl. flip-open lens caps & all weather zoom ring Other Features: Fast focus eyebell Black matte finish Spring-gun rated Waterproof Shockproof Fogproof This rifle scope by Hawke Sport Optics is a great choice for air gun enthusiasts who are looking to get the most out of their gun. This scope is a part of Hawke’s Airmax EV series and features the MAP 6 reticle and HD optical system for improved accuracy. Whether you hunt, target shoot or plink casually in your backyard, this scope will improve the accuracy of your air gun.

Crosman Nitro Lubricating Oil for All Airsoft Guns, 57ml $5.63 Crosman Nitro Lubricating Oil reduces friction and prevents airsoft guns from jamming in the battlefield. This high grade silicone oil comes in a compact spray bottle container for easy application during intense skirmish situations. Maintain the reliability of your airsoft gun and order today! 57ml (1.93 fl oz) May increase or decrease muzzle velocity (varies by model) Can be used on new guns, but they may shoot slower for the first 100 Rds after use AEG & spring guns should be lubricated every 3,000 to 6,000 shots Gas guns should be lubricated every 1,000 to 3,000 shots Not recommended for use on o-ring and other plastic components We can not ship Crosman Nitro Lubricating Oil using air services. Please consider this when you choose a shipping method. Instructions: Remove magazine Spray a short burst down the barrel & through the feed tube in the magazine well Remove excess oil & wipe barrel with a swab

UTG Scope Mount Base, Fits RWS Diana 48, 52, 54 & 460 Magnum with TO5 Trigger, Compensates for Droop & Stops Scope Shift $22.74 We strongly recommend that you use a 2-piece Weaver scope mount that has 4 screws on each ring cap.

UTG Scope Mount Base, Fits RWS Diana 34, 36, 38, & 45 with TO5 Trigger, Compensates for Droop & Stops Scope Shift $22.74 We strongly recommend that you use a 2-piece Weaver scope mount that has 4 screws on each ring cap.

Benjamin & Sheridan Repair Kit, Fits Some Pre-1995 Multi-Pump Guns w/Soldered Valve $33.54 Repair kit fits these multi-pump guns made before 1995 (they have a soldered valve): Benjamin 397, 392, 340, 342 & 347 guns as well as Sheridan C9 (Silver Streak) & CB9 (Blue Streak). To determine if this kit is for you: Remove the screw in front of triggerguard to remove rear part of the stock Remove the pins or screws that hold the retention cap at the rear of the receiver Remove the guide pin, spring & hammer to reveal the compression tube If the compression tube appears to be brass & is one piece with a pin protruding from it, you’ll need the other kit (CR/RepairKitC9) instead of this one If your gun has a rounded square hole with a valve stem sticking up through it, then the kit shown on this page will fit your gun. The included valve tool (pictured on this page) is needed to remove the parts from the soldered valve body (directions included with kit). If you need assistance or would like Pyramyd Air’s techs to do the installation, contact our technicians at 888-262-4867, ext. 244 This kit includes parts that are still available from Crosman and may require slight modification. If your gun is very old and has been treated with any petroleum distillates and/or solvents that damage rubber seals, the removal of the old parts can be challenging. The obsolete gasket that seals the valve guide to the compression tube can normally be reused. If you used petroleum products, it may be irreparably damaged and will need to be replaced by a thin o-ring. If you would like Pyramyd Air’s tech department to install this kit in your Sheridan or Benjamin rifle, please contact them at 888-262-4867, ext. 5. There will be an additional cost for the installation service, plus shipping both ways…BUT it’ll be done perfectly!