Replace Part

My dog peed on outdoor central air unit and eroded the aluminum mesh. "I can replace myself?

I can see the coil in the outdoor unit where the aluminum mesh has eroded some of the urine. "I can fix this without a technician? I can see the coil of the outdoor unit where the mesh has eroded part aluminum in the urine. "I can fix this without a technician? If not, can be expensive to fix?

No, this is not a DIY store. You can follow using it, but you will sacrifice some efficiency.

GIMP 2.3 Tutorial – Face Replace (Part 2)

Eun Jin Cocking Lever Screw, Fits 909S Air Rifle $2.34 Cocking lever screw Fits 909S air rifle Original replacement part Did you lose the cocking lever screw on your Sam Yang 909S air rifle? Replace it with this one made by Eun Jin, a subsidiary of Sam Yang.

Eun Jin Fill Port Assembly, Fits Sumatra Air Rifle $21.54 Fill port assembly Fits Sumatra air rifle Original replacement part from Eun Jin Did you damage the fill port on your Sumatra air rifle? Replace it with this one made by Eun Jin, the original manufacturer.

Beeman Mainspring – Hurricane $13.57 Spare part: Beeman Mainspring – Hurricane

Carbon Fiber Tank, 4500 psi, 88 cu ft $839.99 DOT-approved Carbon fiber filament wound over aluminum bladder 88 cu ft 4500 psi max pressure 11.3 lbs dry weight Includes: Hose with 1/8" BSPP threads on both ends Seal washer Hose has an inline gauge (eliminates use of a yoke) Air Venturi female quick-disconnect adapter with 1/8" BSPP male threads on one end This is not a scuba tank. It’s a carbon fiber tank, which is also called an scba tank, and has a high-pressure scba valve…like the one firefighters use on their scba tanks. Many dive shops do not have the ability to fill these tanks. In some towns, the fire department has a compressor that can fill a high-pressure carbon fiber tank, as firefighters use smaller scba tanks for breathing equipment during rescues. You might want to approach your local fire department and ask if they would be willing to fill your high-pressure carbon fiber/scba tank from their compressor. Another alternative is to contact a local paintball store, as paintballers use carbon fiber tanks to fill their markers. If the only alternative you have is to fill your high-pressure carbon fiber scba tank at a dive shop, a 1/8" BSPP male to DIN female adapter (our part # AA-Z2128-300) can temporarily replace the hose on the valve adapter so the dive shop can fill your tank.

Crosman Assembled Piston with Spring Guide $19.19 Spare part for Legacy 1000 full power version.

Hill Hand Pump Micron Filter Replacement $9.59 Micron filter replacement Fits all Hill hand pumps Easy to replace Instructions: Unscrew the hexagonal connector on top of the base housing (to remove pump) Remove the filter from its seat in the bottom of the housing Place the replacement filter into the housing Replace the o-ring, if needed Reattach the pump and tighten the hexagonal connector Maintain your Hill hand pump, and it’ll always be reliable. Replacing the filter is essential for proper functioning of the pump.

Air Venturi Bronco Mainspring $8.34 Mainspring Fits Air Venturi Bronco Mainsprings can weaken due to leaving your spring-piston air gun cocked for an extended period of time. Springs can also break and bend. If you need to replace the mainspring in your Bronco air rifle, this is the one to get!

Micrometer Rear Sight, Fits Weihrauch & Beeman HW Air Rifles $59.94 Micrometer rear sight Adj. for windage & elevation Fits Weihrauch & Beeman HW air rifles This Weihrauch micrometer rear sight fits Weihrauch and Beeman HW air rifles. If you’ve lost your original rear sight or need to replace one, get this.

Umarex Barrel for Beretta CO2 .177 Pistol $23.99 Umarex barrel for beretta CO2 pistol (.177) Part number: 41940031

Hill MK3 Hand Pump Dry-Pac Refill $9.54 Dry-Pac refill For Hill hand pumps that have a Dry-Pac unit Removes 90% of harmful moisture Replace every 4 months (every 2-3 months in warmer or more humid climates) Non-toxic Dry-Pac desiccant only Keep moisture out of your gun’s air reservoir! Moisture causes rust and can compromise the integrity of your tank. This is the medium that’s inside the Dry-Pac unit.

HFC Gas Blow Back Series Upgraded Hammer Spring $3.54 HFC Gas Blow Back Series Upgraded Hammer Spring (#56) This upgraded hammer spring from HFC is designed to enhance the velocity of your Airsoft gas blowback pistol. Most hammer springs are very easy to remove and replace in quality Airsoft gas blowback guns. They are found inside the Main Spring Housing, located at the back of the grip in many different Airsoft gas pistols like those made, of course, by HFC, but also WE and KJW, for example.

Hakkotsu Thunder B CO2 Package Grenade Kit B $35.99 Grenade kit Package includes 1 main core body, 3 cylinder shells & 4 safety pins The Hakkotsu Thunder B grenade is powered by disposable CO2 gas and is ideal for use in milsim bombing demonstrations. The color & shape of this grenade is similar to it’s real military counterpart in that a safety pin must be pulled to trigger the explosion. The Thunder B is reusable, simply replace the CO2 gas cylinder along with the outer shell and you’ll be ready to fire again! This grenade creates a noise level explosion of 130db, be alert when using.

HFC Gas Blowback Series Hammer Spring $2.39 Gas blowback series hammer spring Fits MSA92B, MFA92B, PSA92B & PFA92B metal & plastic barrels This HFC hammer spring is designed to enhance the velocity of airsoft gas blowback pistols. Most hammer springs are very easy to remove and replace. The spring fits MSA92B, MFA92B, PSA92B & PFA92B metal & plastic gas blowback airsoft pistol barrels.

Slide Bar, Fits .177 Cal Colt 1911 CO2 Pistol $60 Slide bar for .177 caliber Colt 1911 CO2 pistol Spare part: U-41740010

UTG Pellet & BB Trap, Ballistic Curtains, Paper Targets, Steel Backer $35.94 UTG BB & pellet trap Polymer trap Ballistic curtains slow your projectiles and help keep them in the trap Steel backer Cardboard for attaching targets For steel BBs and .177 cal lead airgun pellets with a max muzzle velocity of 1200 fps Use from a distance of at least 30 feet Do not use with pointed pellets, darts, arrows, bolts or slingshot ammo Do not shoot at this with firearms 8"x9.75"x9.75" Includes 6 paper targets This robust trap from UTG can take a hit from steel BBs and powerful pellet guns. The trap’s polymer body helps control ricochet, and the ballistic curtains slow down steel BBs and pellets as they enter the trap. Ballistic curtains help keep the ammo inside the trap, reducing your exposure to lead fragments and lead dust. Shooters and spectators should always wear safety glasses. Never use this trap with ammo other than the ones listed above. Remember to check the steel backer and replace it if it shows wear. Regularly replace the cardboard to help control ricochets. Do not use this airgun trap with any caliber larger than .177. Do not shoot at it with firearms (even if the velocity is under 1200 fps).

Radians Cloak Goggles, Clear, Anti-Fog $17.94 Radians goggles Clear Anti-fog Polycarbonate lens Meets ANSI Z87.1+ standards Adjustable Neoprene headband Provides 99.9% UVA/UVB protection Protect your vision during outdoor shooting excursions. These Radians goggles meet ANSI Z87.1+ standards and are well ventilated to prevent fogging in the elements. The goggles have a molded rubber lining and an adjustable Neoprene headband for a secure and comfortable fit. A clip attachment also allows you to replace the polycarbonate lens. This package does not include additional lens. Polycarbonate safety glasses protect your eyes from impact, but the glasses deteriorate due to scratches, light, etc., and should be replaced after 2 years.

Airforce Braided Steel Hose, Quick-Disconnect, Fits Older Airforce Refill Clamp & Hand Pump $36 Braided steel hose Quick-disconnect fitting Fits older Airforce refill clamp with gauge (U1012) & older AirForce hand pump (U1014) To fill Talon/Condor rifles, use a refill adapter with quick-disconnect nipple (U1013) to attach the hose’s quick-disconnect This braided steel hose will stand up to many years of use without compromising its integrity. Strong, flexible, reliable…and safe. Current AirForce high-pressure fill devices come with a hose. The older pumps and scuba yokes did not come with a hose. If you have one of the older units and need to replace your hose, this is the item to get.

Piston Seal, Fits Walther Falcon Hunter & Walther Talon Magnum $13.14 Piston seal Fits Walther Falcon Hunter and Walther Talon Magnum Spare part for either Walther spring-piston air rifle. Sometimes, gun blow seals or the seals are cut due to becoming dislodged. This is the correct replacement part for your air gun.

ARH Piston Seal, Fits Webley Patriot And Beeman Kodiak Air Rifles $26.7 ARH piston seal Fits Webley Patriot & Beeman Kodiak air rifles If your piston seal is worn or cut, this is the proper replacement part.

Piston Seal, Fits Gamo Whisper & Gamo Big Cat $13.14 Piston seal Fits Gamo Big Cat 1200 or 1250 and Gamo Whisper (all models) Sometimes, seals in your spring-piston air rifle need to be replaced due to a variety issues. If you need a replacement for your Gamo Big Cat or Gamo Whisper air gun, this is the correct part!

Eun Jin Check Valve Assembly, Fits Sumatra Air Rifle $23.94 Check valve assembly Fits Sumatra air rifle Original replacement part from Eun Jin Most people don’t need a new check valve assembly for their Eun Jin Sumatra air rifle. But, if you do, use this one. It’s made by Eun Jin, the original manufacturer.

Replica M9 US Army Plastic Helmet, Black $17.94 Look the part from head to toe with this military-style helmet. Designed to be lightweight and comfortable, the helmet features flared sides and an interior webbing system for airflow, and a dual chinstrap for added comfort when hiking or running. NOTE: There are no safety certifications or claims associated with this product. Take the tactical advantage with FIREPOWER Airsoft Armor.

Replica M9 US Army Plastic Helmet, Green $17.94 Look the part from head to toe with this military-style helmet. Designed to be lightweight and comfortable, the helmet features flared sides and an interior webbing system for airflow, and a dual chinstrap for added comfort when hiking or running. NOTE: There are no safety certifications or claims associated with this product. Take the tactical advantage with FIREPOWER Airsoft Armor.

Crosman B272 4-Pc Intermount, 3/8" Dovetail $17.94 Attaches to the barrel & provides a 3/8" dovetail Includes 1 set, which is 2 bases (each base has 2 sides that are screwed together) Black matte finish Fits current production Benjamin & Sheridan airguns Mounts so far forward that you’ll have to use a pistol scope to get the right eye relief. Do not grab any part of the scope when pumping your gun!

TSD Large ABS, Foam Lined Pistol Case $7.08 Large molded-in handle High-density foam Thick wall construction for maximum protection Comfortable, secure latches Black Finish Outside dimensions: 12" x 8.5" x 3" Inside dimensions: 11" x 7.5" x 2.5" Attention customer: This case has a small hole in the middle of one side that is smaller than a dime. The hole should not affect the cases durability or protection of your gun, however, water can penetrate the case. The hole is part of the production process and and is not a defect.

Ballistol Lube, Aerosol Spray, 6 oz. $9.54 Superior liquid for preserving airguns, firearms, marine equipment & more! Dissolves traces of copper, lead, brass, zinc & tombac Cleans, lubes & protects every part of your gun Forms a film against rust Never gums up or hardens Ideal for protecting & preserving gun metal and wood stocks Removes rust & neutralizes bluing salts found in the barrels of new guns, including airguns Neutralizes fingerprints (which are acidic) Actively propels itself & reaches areas inaccessible to the applicator Originally invented for military use Biodegradable & environmentally friendly Non-toxic & contains no carcinogens Aerosol spray 6 oz.

IZH Drozd Adapter, 1/2"x28TPI, Thread Protector $30.58 The Drozd is one of the most exciting BB guns to hit the market in a long time! If you’re lucky enough to have one and want to mount an accessory that is threaded 1/2"x28TPI, such as our unrestricted fake suppressor, then this is the part you need. To ensure exact thread alignment, the threaded adapters are CNC-machined to precision tolerances from a solid steel rod in one lathe operation. They are hot salt blued to match the gun. The included steel thread protector covers the threads on your barrel when no accessory is mounted. Easy installation in place of the existing barrel nut. No tools or modifications are required. Adapter assembly includes one adapter and one knurled thread protector. This is the way the gun should have come from the manufacturer! Give your Drozd a tactical look… order a threaded adapter today!

Leapers 5th Gen 3-9×40 TF2 Scope, Mil-Dot Reticle, 1/4 MOA, 1" Tube, 3/8" Dovetail Rings $53.94 Rifle scope 3-9x magnification 40mm objective lens 1" tube 1/4 MOA (1/4" click value @ 100 yds) Mil-dot reticle 35 yds parallax setting 36 ft to 12 ft field of view 3.3" to 3.1" eye relief 9.9mm to 4.5mm exit pupil 14.8 oz. 13.58" long Includes: Flip-open lens caps, hex wrench, hex screw, 3/8" medium dovetail rings, cleaning cloth & manual Other features: True Strength scope Nitrogen-filled Shockproof Fogproof Rainproof Angled integral sunshade TF2 target turrets Black matte finish Mount this UTG riflescope on any air rifle or rimfire rifle equipped with a 3/8" dovetail rail or grooves. This scope is part of Leapers’ True Strength series and is shockproof, fogproof and rainproof.

Benjamin & Sheridan Repair Kit, Fits Some Post-1995 Multi-Pumps w/Cartridge Valve $19.14 Repair kit fits these multi-pump guns made after 1995 & they have a compression tube that slides out of the assembly & does not need a special tool (has a cartridge valve & the valve is NOT soldered). It may be necessary to push out the assembly from the front of the tube: Benjamin 397 & 392 guns as well as Sheridan C9 (Silver Streak) & CB9 (Blue Streak). To determine if this kit is for you: Remove the screw in front of triggerguard to remove rear part of the stock Remove the pins or screws that hold the retention cap at the rear of the receiver Remove the guide pin, spring & hammer to reveal the compression tube If the brass compression tube comes out in one piece, then this is the kit you need If your gun has a rounded square hole with a valve stem sticking up through it, then you need the other repair kit (CR/Repairkit) If you need assistance, contact our technicians at 888-262-4867, ext. 244

Hawke Sport Optics Airmax EV 3-9x40AO Rifle Scope, Map 6 Reticle, 1/4 MOA, 1" Tube $155.99 Rifle scope 3-9x magnification 40mm objective lens (adjustable objective) 1" matte black mono tube 1/4 MOA (1/4" click value @ 100 yds) Map 6 reticle 10 yds to infinity parallax adjustment 44.1′ to 14.7′ field of view @ 100 yds 3.2" eye relief 16 oz. 12.30" long Incl. flip-open lens caps & all weather zoom ring Other Features: Fast focus eyebell Black matte finish Spring-gun rated Waterproof Shockproof Fogproof Whether you target shoot professionally or plink for fun in your backyard Hawke Sport Optics rifle scopes are great for improving the accuracy of air guns & air rifles. This scope is part of Hawke’s Airmax EV series and is capable of giving you an extra 20% field of view compared with standard rifle scopes. The MAP 6 Multi-Aim-Point reticle is also calibrated to work with nearly any rifle trajectory. Pick one up for your favorite airgun or air rifle today!

Hawke Sport Optics Airmax EV 3-9x50AO Rifle Scope, MAP 6 Reticle, 1/4" MOA, 1" Tube $179.99 Rifle scope 3-9x magnification 50mm objective lens (adjustable objective) 1" tube 1/4 MOA (1/4" click value @ 100 yds) MAP 6 reticle (Multi-Aim-Point) 15 yds to infinity parallax adjustment 44.1′ to 14.7′ field of view @ 100 yds 3.2" eye relief 18.4 oz. 12.6" long Incl. flip-open lens caps & all weather zoom ring Other Features: Fast focus eyebell Black matte finish Spring-gun rated Waterproof Shockproof Fogproof This rifle scope by Hawke Sport Optics is a great choice for air gun enthusiasts who are looking to get the most out of their gun. This scope is a part of Hawke’s Airmax EV series and features the MAP 6 reticle and HD optical system for improved accuracy. Whether you hunt, target shoot or plink casually in your backyard, this scope will improve the accuracy of your air gun.

Hawke Sport Optics Airmax EV 4-12x50AO Rifle Scope, Map 6 Reticle, 1/4 MOA, 1" Tube $191.99 Rifle scope 4-12x magnification 50mm objective lens (adjustable objective) 1" tube 1/4 MOA (1/4" click value @ 100 yds) MAP 6 reticle (Multi-Aim-Point) 15 yds to infinity parallax adjustment 33′ to 11′ field of view @ 100 yds 3.2" eye relief 18.7 oz. 13" long Incl. flip-open lens caps & all weather zoom ring Other Features: Fast focus eyebell Black matte finish Spring-gun Rated Waterproof Shockproof Fogproof Improve the accuracy of your airgun with this rifle scope by Hawke Sport Optics. This scope has the MAP 6 reticle & HD optical system and is part of Hawke’s Airmax EV series. This scope has an all weather zoom ring and is shockproof, fogproof and waterproof allowing it perform reliably in adverse weather conditions. Pick one up for your favorite airgun!

Benjamin & Sheridan Repair Kit, Fits Some Pre-1995 Multi-Pump Guns w/Soldered Valve $33.54 Repair kit fits these multi-pump guns made before 1995 (they have a soldered valve): Benjamin 397, 392, 340, 342 & 347 guns as well as Sheridan C9 (Silver Streak) & CB9 (Blue Streak). To determine if this kit is for you: Remove the screw in front of triggerguard to remove rear part of the stock Remove the pins or screws that hold the retention cap at the rear of the receiver Remove the guide pin, spring & hammer to reveal the compression tube If the compression tube appears to be brass & is one piece with a pin protruding from it, you’ll need the other kit (CR/RepairKitC9) instead of this one If your gun has a rounded square hole with a valve stem sticking up through it, then the kit shown on this page will fit your gun. The included valve tool (pictured on this page) is needed to remove the parts from the soldered valve body (directions included with kit). If you need assistance or would like Pyramyd Air’s techs to do the installation, contact our technicians at 888-262-4867, ext. 244 This kit includes parts that are still available from Crosman and may require slight modification. If your gun is very old and has been treated with any petroleum distillates and/or solvents that damage rubber seals, the removal of the old parts can be challenging. The obsolete gasket that seals the valve guide to the compression tube can normally be reused. If you used petroleum products, it may be irreparably damaged and will need to be replaced by a thin o-ring. If you would like Pyramyd Air’s tech department to install this kit in your Sheridan or Benjamin rifle, please contact them at 888-262-4867, ext. 5. There will be an additional cost for the installation service, plus shipping both ways…BUT it’ll be done perfectly!

Gamo Plinking Target with Ball Drop, 4 Balls $55.19 Ball drop plinking target Corrosion-resistant powder coating Use only lead pellets Some assembly required Frame legs are pushed into the ground Includes target frame, 12 orange target stickers and 4 balls This target is for .177 pellet guns only. Use only lead pellets and guns that have a max muzzle velocity of 1,000 fps or less. Place this target AT LEAST 20 yds from the muzzle of your gun to avoid ricochets. The white balls deliver significant bounceback if the pellet hits one of them instead of the flange on the side of the frame. Anyone in the area of this target (even if they’re not the one shooting) should wear safety glasses and be aware that pellets may bounce back at them. Remove all animals/pets from the entire shooting area! Remember to wear safety glasses and hearing protection. Ricochet’s are possible, even with lead pellets. Do not use BBs or lead-free pellets, as they increase the chances of ricochets from any part of the frame or the white balls. Shoot the flange on the side and a ball drops to the next level. The shot flange resets and blocks the next ball from dropping. Shoot the next flange, and the ball drops to the next level. Keep going till all the balls have dropped through all levels…and then start all over. A great target for group competitions or just fun shooting by yourself.

Be Sociable, Share!

•