Psi Carbon

What is the highest temperature at the lowest pressure that the carbon dioxide remains liquid?

No response to 4 days: Let's say I need to vaporize liquid CO2, but do not want to deal with a lot of condensation, and do not want to go supercritical CO2 as there will be a large amount of heat involved in evaporation. What would be the optimum temperature / pressure? In F and PSI please. Thanks liguid CO2 forms under pressure and cold temperatures, strong sublime at atmospheric pressure, also super critical fluid forms at high temperature and pressure. It is possible have liquid CO2 to 0F, less than 300 PSI. I know this I wonder how much pressure is needed to ensure that liquid to maintain 24F? Is this possible? If this liquid vaporizes I run the risk that the supercritical fluid goes? Male Chem these cards have no real number, you have not answered the question.

-2

Earthbound Boss Battle Carbon dog&diamond Dog

Carbon Fiber Tank, 4500 psi, 88 cu ft $839.99 DOT-approved Carbon fiber filament wound over aluminum bladder 88 cu ft 4500 psi max pressure 11.3 lbs dry weight Includes: Hose with 1/8" BSPP threads on both ends Seal washer Hose has an inline gauge (eliminates use of a yoke) Air Venturi female quick-disconnect adapter with 1/8" BSPP male threads on one end This is not a scuba tank. It’s a carbon fiber tank, which is also called an scba tank, and has a high-pressure scba valve…like the one firefighters use on their scba tanks. Many dive shops do not have the ability to fill these tanks. In some towns, the fire department has a compressor that can fill a high-pressure carbon fiber tank, as firefighters use smaller scba tanks for breathing equipment during rescues. You might want to approach your local fire department and ask if they would be willing to fill your high-pressure carbon fiber/scba tank from their compressor. Another alternative is to contact a local paintball store, as paintballers use carbon fiber tanks to fill their markers. If the only alternative you have is to fill your high-pressure carbon fiber scba tank at a dive shop, a 1/8" BSPP male to DIN female adapter (our part # AA-Z2128-300) can temporarily replace the hose on the valve adapter so the dive shop can fill your tank.

Air Venturi Inline Air Pressure Gauge, 0 to 4500 psi $55.19 Inline air pressure gauge Measures up to 4500 psi Female quick-disconnect Male fitting If you use high-pressure fill devices for your precharged pneumatic guns and don’t have a pressure gauge on your fill device, this will do the job. The inline air pressure gauge fits the Air Venturi carbon fiber tank, AV-4500HPT.

AireTex 45 Gasoline Air Compressor, Max 4500 PSI, Incl. Scuba Yoke & 300 DIN Hose $4314 The compressor may not look exactly like the one shown here. AireTex 45 gasoline air compressor 4500 PSI max working pressure 3-stage, 3-cylinder compressor Stainless steel valves Low-speed operation Stainless steel intercoolers & after-cooler Dual-stage water separator Purifier meets or exceeds CGA G7.1 Grade E and NFPA 1500 standards Mechanical separator removes particles, oil mist & water droplets Suitable for breathing air Purifier chamber rated for 5000 PSI operation Activated carbon removes tastes & odors Catalyst converts carbon monoxide to carbon dioxide Motor overload shutdown Hour meter 15,000 cu. ft. filtration system Includes standard scuba yoke & 300 DIN filler hose AireTex compressors are as durable and reliable as they are portable. This gasoline compressor gives you max 4500 PSI at less than 10 degrees above ambient room temperature! It takes about 23 minutes to fill an 80 cu ft air bottle. Use only for filling scuba tanks and other high-volume devices. Do not connect directly to an airgun reservoir, as it will fill too fast and heat up. When filling air bottles, do not leave the compressor unattended!

Air Venturi Tank Adapter Assembly, 4500 psi, for High-Pressure SCBA Tanks $105 Tank adapter assembly Fits high-pressure scba (self-contained breathing apparatus) tank, including the Air Venturi carbon fiber tank 4500 psi Includes bleeder, hose and female quick-disconnect coupling Does not include a manometer (air pressure gauge) Fits the Air Venturi carbon fiber tank–AV-4500HPT [PY-A-350]. Inline manometer (air pressure gauge) sold separately–AV-00031 [PY-A-3865]. Suitable for connecting your high-pressure scba tank to a precharged pneumatic air rifle.

AireTex 45 Electric Air Compressor, Max 4500 PSI, Incl. Scuba Yoke & 300 DIN Hose $4074 AireTex 45 electric air compressor 4500 PSI max working pressure 3-stage, 3-cylinder compressor Stainless steel valves Low-speed operation Stainless steel intercoolers & after-cooler Dual-stage water separator Purifier meets or exceeds CGA G7.1 Grade E and NFPA 1500 standards Mechanical separator removes particles, oil mist & water droplets Suitable for breathing air Purifier chamber rated for 5000 PSI operation Activated carbon removes tastes & odors Catalyst converts carbon monoxide to carbon dioxide Motor overload shutdown Hour meter 15,000 cu. ft. filtration system Requires 220V electrical outlet Includes standard scuba yoke & 300 DIN filler hose The AireTex 45 electric compressor is a top-rated machine that easily fills up scuba tanks and large carbon fiber tanks. The purifier is rated for 50 hours of run time. The compressor outputs 4.20 cubic feet per minute. It runs at 1100 RPM and has over 50 feet of stainless cooling coils. It takes about 23 minutes to fill an 80 cu ft air bottle. Use only for filling scuba tanks and other high-volume devices. Do not connect directly to an airgun, as it fills too fast and heats up. When filling air bottles, do not leave the compressor unattended!

Benjamin Carbon Fiber Tank, 90 cu in, Gauge, Hose w/Female Quick-Disconnect $479.99 Benjamin carbon fiber tank 90 cu in capacity 4,500 psi max pressure 15" long 12" microbore hose with female quick-disconnect Built-in air pressure gauge (manometer) Bleed valve Restricted-flow manifold for controlled, precise filling Lightweight, easier to transport than a metal scuba tank 4.625"x14.625" 4.6 lbs. Have you resorted to carrying a steel or aluminum buddy bottle to refill your PCP air guns in the field? You’ll get even more refills from this carbon fiber tank since it’s 4,500 psi. Plus, it doesn’t weigh as much. Depending on the size of your airgun’s onboard reservoir, you could get up to 16 fills before you have to refill this tank.

Benjamin Carbon Fiber Tank, 54 cu ft, Gauge, Hose w/Female Quick-Disconnect $719.99 Benjamin carbon fiber tank 54 cu-ft capacity 4,500 psi max pressure 38" long 12" microbore hose with female quick-disconnect Built-in air pressure gauge (manometer) Bleed valve Restricted-flow manifold for controlled, precise filling Lightweight, easier to transport than a metal scuba tanks 4.625"x37" 15 lbs. This monster carbon fiber air tank will keep you in air for days, weeks…and probably months! Fill all your precharged pneumatic (PCP) air pistols and air rifles and shoot day and night. Depending on the size of your gun’s onboard reservoir, you’ll get up to 80 fills with this big boy.

Benjamin Air Tank, 2000 psi Output $191.99 Benjamin air tank Designed for high-pressure air up to 3000 psi Regulated to 2000 psi output (specifically for the Benjamin Discovery & Marauder and the Crosman Challenger) 72 cubic inches Fills a 2000 psi rifle 6 to 8 times from one tankful To fill the Discovery, Marauder or Challenger, you’ll also need FAH002 (Dual Fuel adapter) Do not use this tank with paintball guns Includes male quick-disconnect coupling (can be filled with the Benjamin hand pump) 4.5" outside dia., 11.5" long, 4.40 lbs.

Hill Pump MK3, Up to 3300 PSI $347.99 Hill hand pump 3-stage pump Up to 230 bar/3,300 psi Gen 3 pump requires less effort Field-stripped in 5 mins. Dry-Pac system removes 90% of harmful moisture Includes Dry-Pac & hose ending in 1/8" bspp female threads Made in England Hill is known in the industry for making superior hand pumps. They’ve been producing commercial pumps for over 170 years and have applied their industry knowledge to the manufacture of airgun hand pumps. Hill hand pumps have a reputation for being extremely durable and outlasting other pumps by many years. Because the hand pump is easy to disassemble, it can be easily serviced by the owner. There’s no other manufacturer that sells replacement parts for their hand pumps. In fact, there’s no hand pump manufacturer that recommends disassembly of their products. Other manufacturers state that disassembly will void your warranty! Your Hill hand pump comes with a lifetime warranty. Maintain it as indicated in the owner’s manual and use Hill replacement parts as needed, and you’ll have a hand pump on which you can depend for decades.

Leisure Pro Scuba Tank, K Valve, 80 cu ft, Aluminum, 3000 psi $299.99 Scuba tank K valve 80 cu ft Aluminum 3000 psi maximum pressure Shipped empty Yellow exterior color

Air Venturi Female Quick-Disconnect Adapter, 1/8" BSPP Male Threads, Steel, Rated to 5000 PSI $23.4 Female quick-disconnect adapter 1/8" BSPP male threads on the other end Steel Rated for 5000 PSI This female steel quick-disconnect adapter has 1/8" BSPP male threads on the other end. Rated to a whopping 5,000 PSI, it’ll work for those guns that run on much higher pressure air.

Air Venturi Male Quick-Disconnect, 1/8" BSPP Female Threads, Steel, Rated to 5000 PSI, Incl. Delrin Seal $11.94 Male quick-disconnect coupling 1/8" BSPP female threads on the other end Steel Rated for 5,000 psi Includes Delrin seal Delrin seal stops leakage!

Air Venturi HP4500 Replacement Valve, Fits Carbon Fiber Tank $179.99 Replacement valve for Air Venturi AV-4500HPT, a carbon fiber tank.

AirForce PCP Hand Pump, for AirForce Rifles, Incl. Hose + Adapter, Pumps up to 3600 psi $234.9 Fits AirForce Condor, Talon & Talon SS rifles. 3-stage hand pump Does not heat up with constant use Requires less effort than other pumps Goes up to 3,600 psi Integral air pressure gauge Moisture filter Incl. 11" braided steel hose with female quick-disconnect coupling and AirForce fill adapter with male quick-disconnect coupling Every pump tested by the manufacturer

Air Venturi Scuba Tank, 80 cu ft, Aluminum, Deluxe Valve, 3,000 psi, Black $239.99 Scuba tank K valve 80 cu ft Aluminum 3,000 psi maximum pressure (206 bar) Shipped empty Black Indicator shows if valve is open or closed If you shoot precharged pneumatic guns, you’ll need an air source. A scuba tank is a great way to store lots of air to pressurize all your guns.

Air Venturi Microbore Hose, DN2, Up to 4500 PSI, 1/8" BSPP Connectors, 24" Long $35.99 DN2 microbore hose Fits high pressure tanks and hand pumps Max operating pressure is 4500 psi 1/8" BSPP male & female connectors 24" long Microbore hoses are a great way to get air into your gun without having to fill up a large-diameter hose, which is what traditionally comes with fill equipment such as scuba tanks and hand pumps. Our microbore hose fills your gun faster so you can spend more time shooting and less time filling.

Benjamin Discovery Rifle & Pump $479.99 Uses 2,000 PSI Air or CO2. Dual Fuel.

Benjamin Discovery Air Rifle $311.94 Uses 2,000 PSI Air or CO2. Dual Fuel.

Bushmaster Carbon 15 Airsoft AEG Submachine Gun $263.94 Premium grade, full-/semi-auto

Carbon Express 26" Thunder Express II Youth Arrows, 3 pack $11.09 The Thunder Express II is designed for young, beginning archers. Made from fiberglass so it’s safer than wood. It includes a weighted target point to ensure proper "front of center" balance and improve performance. Features a cool blue swirl design.

Benjamin Hand Pump, Fits Crosman & Benjamin PCP Guns $214.8 3-stage hand pump Made specifically for the Crosman/Benjamin PCP pistols & rifles (fits any brand of PCP gun with a male Foster quick-disconnect on its reservoir) Includes a female Foster quick-disconnect on the end of the pump hose Goes up to 3600 psi (although some of the guns listed above operate on a max pressure of 2000 or 3,000 psi) With other hoses, pump can be adapted to other PCPs Requires less effort than other pumps Integral air pressure gauge Moisture filter

Axsor PCP hand pump $238.8 3-stage hand pump Pumps to 3000 psi Integral air pressure gauge Built-in moisture trap Includes a hose ending in female 1/8" BSPP threads Buy optional adapters for pumping AirForce and other brands of PCP guns

AirForce Scuba Tank Adapter K-valve, Steel Hose $102.6 AirForce Airguns scuba tank adapter K-valve Pressure gauge goes up to 3,000 psi Stainless steel mesh hose* Ends in a female quick-disconnect *While the hose is stainless steel mesh, it MAY also have a black plastic cover. Which one you get depends on what we have in stock.

AirForce Scuba Tank Adapter, DIN Connector, Steel Hose $102.6 AirForce Airguns scuba tank adapter DIN connector Pressure gauge goes up to 3,000 psi Stainless steel mesh hose* Ends in a female quick-disconnect *While the hose is stainless steel mesh, it MAY also have a black plastic cover. Which one you get depends on what we have in stock.

Replacement Air Reservoir, Fits Feinwerkbau P700 Air Rifles $387.46 Feinwerkbau replacement air reservoir Built-in manometer (air pressure gauge) 2900 psi max air pressure (200 bar) Fits all Feinwerkbau P700 PCP air rifles Instead of carrying a bulky fill tank or a hand pump, take along a spare air reservoir. Fill it up before your match and avoid lugging extra baggage. Same high-quality construction as the original tank that came with your FWB P700 air rifle.

AirForce Scuba Refill Clamp with Gauge $78.6 Scuba yoke fill station 1/4" AirForce tank adapter Fits scuba tank with standard k-valve 1" diameter micro-gauge reads from 1-5,000 psi across one-third of the gauge face Product may not look exactly like the one shown. Universal! Fits long- & short-necked scuba tanks!

Air Venturi 1/8" BSPP Self-Centering Bonded Seal, .375" Inside Diameter $5.94 1/8" BSPP seal Self-centering bonded seal Seals against high-pressure air leaks Use between 1/8" BSPP connections with flat mating surface around threads Reusable Buna-N (nitrile) seal inside a steel washer .375" inside diameter Reliable up to 4,500 psi (310 bar) When compressed, forms a seal between the flat surfaces around the fastener shank.

Blue #242 Thread-Locker $19.5 Medium strength, 1700 psi. Blue color is best for scope mounting and most gunsmithing applications. Fills fine threads without binding. Locks threaded fasteners against vibration loosening. Prevents leaks and rusting of threads. Bond can be broken loose without heat. Parts disassemble with hand tools. Ideal for fasteners 1/4" to 3/4". Degrease parts thoroughly before using. 6ml tube.

Plano Bow Max Pillar Lock Series 18 Arrow Case, Black $29.99 Protector Series Bow-Max Arrow Case Patented PillarLock System protects arrows Holds up to 18 arrows Sur-Lok arrow holders securely store both aluminum and carbon arrows Comfortable molded-in handle 36"L x 10.75"H x 4"W

Plano 43" Bow Case, Arrow Storage, Lockable, Airline-Approved, Black $55.14 Compact design; High-density foam Thick wall construction with patented PillarLock System Velcrow bow straps Comfortable molded-in handle Sur-Lok arrow storage securely stores both aluminum and carbon arrows Lockable/airline approved 43.25"Lx19"Wx6.75"H exterior dimensions 41.50"Lx14.75"Wx6"H interior dimensions

Plano 49" Bow Case, Camo $57.59 Compact design; High-density foam Thick wall construction with patented PillarLock System Velcrow bow straps Comfortable molded-in handle Sur-Lok arrow storage securely stores both aluminum and carbon arrows Lockable/airline approved 49"L x 19.5"H x 6.5"W

Benjamin CO2 & Air FIll Adapter, Fits Benjamin Air Tank or Standard Paintball CO2 Tank $83.99 Made specifically for the Dual Fuel capability of the Benjamin Discovery & Marauder and the Crosman Challenger. Includes: CGA-320 fitting for Benjamin carbon fiber tank or a standard paintball CO2 tank Fitting is .825×14 (standard paintball CO2 connector size) 7" stainless steel braided hose (12" overall length) Patented bleeder valve Female Foster quick-disconnect fitting

Be Sociable, Share!

•