X7/A5 (NA) hoppers were made to compensate or there are two different types?

I was wondering. The power of the cyclone, Tippmann X7/A5 LP (Low Profile) of the hopper, do you have a feature that is offset? Or is there another type that is offset? I have a Red Dot sight on my A5 and I need my hopper compensation that I have today is not a brand for Tippmann is a little loose and has a white top, unlike the Black Tippmann. It would be appreciated if someone told me that if the hopper does, and where I find one. Thanks, havoc1482 (Mike Wolak) Do not tell me "How can the hopper in the way" NcStar Red Dot is my view too big, I'm looking for a shift LP A5/X7 hopper.

Yes, you can do two things 1. You can buy an elbow as the displacement Tippmann / Spec Ops adapter stovepipe or cyclone Trinidad offset adapter. Both adapters go on your first cyclone, then your hopper at the top of that. They make up more to the right to give a clear line of vision in the center of the gun. The second option is an offset hopper as those by Allen paintball. These hoppers have a base of the movement, all are One Piece. The movement is cast in the same hopper. If you buy the adapter can be added to any hopper has or will buy in the future for the A5. This is a good article in a blog that discussed the options of the cyclone hopper. We can help! Http: / / rockstartactical.wordpress.com /

Comparison of Tippmann Cyclone Compatible Hoppers by hustlepaintball.com

IZH Drozd MP-661K Blackbird $359.99 400-Rd Hopper, Full-/Semi-Auto, Uses CO2

Bravo 1" See-Thru Rings, Weaver Mount, High Profile $11.99 1" see-thru rings Weaver mount High profile

Low Profile Removable Front Sight and Red Laser Combo $35.94 Improve the accuracy of your airsoft gun with the Leapers UTG Low Profile Removable Front Sight and Red Laser Combo. This awesome aluminum sight/laser combo has a low profile designed for easy installation on handguards. The laser features double coil springs for optimal windage & elevation adjustments. Take aim and fire! Removable Front Sight Tower Complete with A2 Square Post Assembly and Integral Combat Quality Tactical Red Laser Pressure Switch and Batteries Included Switch Operating Type: Push-button on/off Switch Laser Control & Adjustment: TS & 4 Points Laser Beam Movement: 80cm @ 10m Laser Type: Class 3R Laser Output Power: 2.5-3.1mW Laser Wavelength: 630-640nm Laser Beam Diameter: 15-20mm@15m Laser Operating Temperature: 14oF – 113oF Laser Battery Operating Time: 80mins Laser Range: 500m Laser Life Time: 6000hrs Pressure Switch Included: Yes Diameter: 0.55" Length: 2.64"

Falcon Airguns Prairie Falcon Profile Rifle $1151.99 Shrouded Bull Barrel, 8-rd Clip

Foregrip, Low Profile, Lever Lock, Fits Weaver/Picatinny Rail $35.94 Leapers UTG foregrip Low profile Lever lock Fits any Weaver/Picatinny rail Quick-detach adj. lever Waterproof O-ring on end cap protects storage area Aircraft-grade aluminum alloy Folds and locks in 2 positions Spring-tensioned Posi-lock Easy installation 1.04 cu in storage space 4.6" high 9.7 oz. Incl. hex wrench Attach this Leapers foregrip to any airgun, firearm or airsoft gun that has a Weaver/Picatinny rail. Secure it in seconds. Folds out of the way when you don’t need it. Sturdy, durable, useful.

UTG Weaver/Picatinny Riser Mount, Medium Profile, 0.83" High, 13 Slots $11.94 Medium-profile riser mount Fit guns with Weaver/Picatinny rail Meets STANAG specs 2 thumb nuts & locking plate for easy installation Aircraft-grade aluminum Matte black See-thru base 0.83" saddle height 13 Picatinny slots 6.1 oz 5.7" long 1.75" wide 1" high

Tactical OP Bipod, SWAT/Combat Profile, Telescoping & Folding Legs $31.14 Tactical bipod Fully adjustable legs with Posi-lock wheel & quick-retract button Folding legs with external spring-tension control Picatinny and swivel stud mounts Steel platform Aluminum legs Legs extend up to 7.9"

UTG Bipod, SWAT/Combat Profile, Adjustable Height, Rubberized Stand $23.94 Bipod Panning Posi-lock Telescoping legs (6.7" to 7.5") Folding legs (reversible) Swivel stud or Picatinny mount Rubberized feet 6.2" to 6.7" center height This is a smaller bipod & is recommended for smaller shooters.

UTG Bipod, SWAT/Combat Profile, Adjustable Height, Steel Feet $23.94 Bipod Panning Posi-lock Telescoping legs (6.7" to 7.5") Folding legs (reversible) Swivel stud or Picatinny mount Steel feet 6.2" to 6.7" center height This is a smaller bipod & is recommended for smaller shooters.

UTG Low-Profile Deluxe Universal Picatinny & Swivel-Stud Bipod $31.14 High Tech Durable Aluminum Construction Clever Picatinny and Swivel Stud Mounting Systems Unique Posi-Lock Feature to Prevent Tipping Panning with Fully Adjustable Center Height From 8.5" to 10.5" Steel Combat Stand See zoomed images for mounting options

UTG Low-Profile Dragon Claw Clamp-on Barrel Bipod $25.8 High Tech Durable Aluminum Construction Clever Adjustment Wheel for Wide Range of Barrel Sizes – 11mm to 19mm User Friendly Clamp-On Features Unique Posi-Lock Feature to Prevent Tipping Foldable with Fully Adjustable Center Height From 9" to 11"

JBU 1" Rings, High, Weaver Mount, See-Thru $8.34 Limited Lifetime Warranty 1" rings High profile See-thru mount Fits Weaver dovetail 2 hex screws/ring secure the scope

1" Quick-Detach Rings, High, Weaver/Picatinny, See-Thru, Law-Enforcement Grade $23.96 1" rings High profile Fits Weaver/Picatinny rail 6 hex screws/ring cap secures the scope Quick-detach base See-thru Law-enforcement grade

1" Quick-Detach Rings, Medium, Weaver/Picatinny, See-Thru, Law-Enforcement Grade $23.96 1" rings Medium profile Fits Weaver/Picatinny rail 4 hex screws/ring secure optics Quick-detach base See-thru Law-enforcement grade

30mm Quick-Detach Rings, High, Weaver/Picatinny, See-Thru, Compact, Law-Enforcement Grade $23.96 30mm rings High profile Fits Weaver/Picatinny rail 4 hex screws/ring to secure scope Quick-detach base See-thru Law-enforcement grade

30mm Quick-Detach Rings, Medium, Weaver/Picatinny, See-Thru, Compact, Law-Enforcement Grade $23.96 30mm rings Medium profile Fits Weaver/Picatinny rail 4 hex screws/ring to secure scope Quick-detach base See-thru Law-enforcement grade

UTG Premium 1" Rings, Low, Weaver Mount, See-Thru $8.7 1" rings Low profile See-thru mount Fits Weaver dovetail Special tape inside the rings keeps your scope tight without excessive clamp pressure!

UTG 30mm Rings, Low, Weaver Mount, See-Thru $11.99 30mm rings Low profile Weaver mount See-thru Anodized black matte finish Special tape inside the rings keeps your scope tight without excessive clamp pressure!

UTG Full 180 Degree View Tactical Goggles $13.14 - Full 180 Degree View, Stylish Level II Tactical Goggles – Anti-reflective Lens – Anti-fog Venting Feature – Shot-resistant BB Deflection Lens – Deflects .2g BBs from Long Distance to Point Blank Range from 450 fps AEG and Airsoft Sniper Rifle – Tactical Low Profile of Goggles Allows Wearer to Use Low Profile Iron Sight While Shooting – Complete with Adjustable Elastic Straps

UTG 1" Max Strength Quick-Detach Rings, Low, Weaver/Picatinny, $17.94 The UTG 1" Max Strength Low Quick-Detach Rings can be efficiently installed and removed on all picatinny rail systems. These high quality tactical rings feature a 4-screw low profile, and are precision machined from aircraft-grade aluminum alloy. Features: 4-screw Low Profile "Tiger" Ring Robust and User Friendly Ergonomic Quick Detach/Lock Lever Anodized Black Matte Finish Max Strength Ring Diameter: 1" Ring Width:18 mm

UTG 1" Max Strength Quick-Detach Rings, Medium, Weaver/Picatinny, See-thru $20.34 The UTG 1" Max Strength Medium Quick-Detach Rings can be efficiently installed and removed on all picatinny rail systems. These high quality tactical rings feature a 6-screw medium profile, and are precision machined from aircraft-grade aluminum alloy. Features: 6-screw Medium Profile "Dragon" Ring Robust and User Friendly Ergonomic Quick Detach/Lock Lever Anodized Black Matte Finish Max Strength See-thru Ring Diameter: 1" Ring Width: 25 mm

CenterPoint 1" Rings, High, 3/8" Dovetail $15.54 1" rings High profile Fits 3/8" dovetail 4 hex screws/ring secure the scope These high-profile rings fit 1" scope tubes and are held in place by 4 hex screws that secure your scope firmly while you shoot. These rings can be mounted on all guns equipped with a 3/8" dovetail.

JB Unicorn Barrel Extension, Fits AR AEG Rifles, 9.5" $57.54 Barrel extension 14mm counter clockwise thread 9.5" This 9.5" long profile barrel extension by JBU fits all airsoft rifles with 14mm counterclockwise thread. The barrel extension can be used with standard M4 length outer barrels. For airsoft use only.

Beeman 5030M 1" Rings, Medium, 9.5-11.5mm Dovetail $45.54 1" rings Medium profile Fits 9.5-11.5mm dovetail 4 hex screws/ring secure the scope Vertical scope stop pin (removable) The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Beeman 5031 30mm Rings, High, 9.5-11.5mm Dovetail $69.54 30mm rings High profile Fits 9.5-11.5mm dovetail 4 hex screws/ring to secure scope Vertical scope stop pin (removable) The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Beeman 5036 1-Pc Mount w/1" Rings, High, 9.5-11.5mm Dovetail $79.14 1" rings High profile Fits 9.5-11.5mm dovetail 4 hex screws/ring secure the scope The hex screws on the base let you adjust the base to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

UTG Leapers Premium 1" Rings, High, Weaver Mount, See-Thru $14.34 Limited Lifetime Warranty 1" rings High profile See-thru mount Fits Weaver dovetail 4 hex screws/ring secure the scope Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Beeman 5030H 1" Rings, High, 9.5-11.5mm Dovetail $45.54 1" rings High profile Fits 9.5-11.5mm dovetail 4 hex screws/ring secure the scope Vertical scope stop pin (removable) The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Centerpoint 1" Rings, Medium, 3/8" Dovetail $14.39 1" rings Medium profile Fits 3/8" dovetail 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Hawke 1" Rings, Weaver, Low, Black $15.59 1" rings Low profile Fits Weaver/Picatinny rail 4 screws per screw cap, 1 screw per base Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers 30mm Rings, High, 3/8" Dovetail $11.99 Limited Lifetime Warranty 30mm rings High profile Fits 3/8" dovetail 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

AirForce 1" Rings, Medium, 9.5-13.5mm Dovetail $24 1" rings Medium profile Fits 9.5 mm-13mm dovetails 4 hex screws/ring to secure the scope Vertical scope stop The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Leapers 30mm Rings, Medium, 3/8" Dovetail $11.99 30mm rings Medium profile Fits 3/8" dovetail 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1" Rings, Medium, 3/8" Dovetail, 2 Screws/Cap $10.79 1" rings Medium profile Fits 3/8" dovetail Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1" Rings, Medium, 3/8" Dovetail, 4 Screws/Cap $11.99 1" rings Medium profile Fits 3/8" dovetail 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Premium 1" Rings, Medium, Weaver Mount, See-Thru $11.99 Limited Lifetime Warranty 1" rings Medium profile See-thru mount Fits Weaver dovetail 4 hex screws/ring secure the scope Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Sports Match 30mm Rings, Extra-High, Adjustable, 9.5-11mm Dovetail $71.99 30mm rings Extra-high profile Fits 9.5mm to 11mm dovetail 4 hex screws per ring cap Removable scope-stop pin Adjustable for height & elevation Sports Match mounts have an excellent reputation for quality and strength. The adjustable height feature is a nice feature not found on most airgun mounts.

Leapers Accushot 1-Pc Bi-directional Offset Mount w/1" Rings, High, 11mm Dovetail $15.54 1-piece bi-directional offset mount 1" rings w/scope stop 11mm dovetail High profile 4 hex screws/ring 2 hex screws on base Mount in either direction 62mm integral base length 18mm wide 21mm saddle height Aircraft-grade aluminum

Leapers Accushot 1-Pc Mount w/1" Rings, 3/8" Dovetail $17.94 1" rings Medium profile Fits 3/8" dovetail 100mm base length 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Mount w/1" Rings, High, 11mm Dovetail $21.54 1" rings High profile Fits 11mm dovetail 4 hex screws/ring secure the scope 100mm base length 80mm between rings Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Mount w/30mm Rings, High, 11mm Dovetail $17.94 Limited Lifetime Warranty 30mm rings High profile Fits 11mm dovetail 4 hex screws/ring secure scope 100mm base length Vertical stop pinSpecial tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Mount w/30mm Rings, Medium, 3/8" Dovetail $17.34 30mm rings Medium profile Fits 3/8" dovetail 100mm base length 3 hex screws/ring secure the scope Vertical stop pin Limited lifetime warranty Special tape inside the rings keeps your scope tight without excessive clamp pressure!

TSD Airsoft Face Mask, Black $15.54 Black 2 piece detachable tactical airsoft face mask. Perforated aluminum eye shield, low profile silicon plastic. Eye shield can be used separately. Made just for Airsoft gaming Protects face and eyes Light weight construction for comfort and mobility Made in Taiwan

TSD Airsoft Face Mask, Green $15.54 Green 2 piece detachable tactical airsoft face mask. Perforated aluminum eye shield, low profile silicon plastic. Eye shield can be used separately. Made just for Airsoft gaming Protects face and eyes Light weight construction for comfort and mobility Made in Taiwan

CenterPoint 1" Rings, High, Weaver/Picatinny $15.54 1" rings High profile Fits Weaver/Picatinny rail 4 hex screws/ring secure the scope Mount an accessory of your choice on your favorite gun. These tactical rings by CenterPoint fit 1" scope tubes and mount on a Weaver/Picatinny rail.

UTG 30mm Quick-Detach Max Strength Rings, Low, Weaver/Picatinny $19.14 30mm rings Low profile Fits Weaver/Picatinny rail 4 hex screws per ring secure your scope Quick-detach lever on each ring for quick attachment & removal Special tape inside the rings keeps your scope tight without excessive clamp pressure! Leapers UTG 30mm Quick-Detach rings can be quickly installed on or removed from your Weaver/Picatinny rail system. They feature 4-screw caps, low profile and are precision-machined from aircraft-grade aluminum alloy, but steel is used for all the bearing surfaces and the key. By creating an open cap top, the mounts are lighter than similar mounts with a closed cap.

Plano Rifle Case, Single, Scoped $29.94 Nothing looks cooler than a scoped rifle in a case! For smaller profile scopes Featuring Patented PillarLock Protection! Holds rifle with large objective lens Thick wall construction Comfortable molded in handle Lockable/airline approved Black Outside dimensions: 53.5"L x 13"W x 3.75"H Inside dimensions: 52.25"L x 9"W x 3"H

CenterPoint 1-Pc Off-Set Mount, 1" Rings, High, 3/8" Dovetail, 4 Screws/Cap $15.54 1" rings 1-pc off-set mount High profile Fits 3/8" dovetail 4 screws/ring cap 2 hex screws secure the base Attach a scope to your favorite airgun, airsoft gun or rimfire with this 1-pc off-set mount. The mount fits a 3/8" dovetail and has 2 hex screws on the base. The rings have 4 hex screws per cap that hold your scope solidly in place.

5.11 Tactical TDU 1.75" Belt, Plastic Buckle, Extra Large, Black $17.99 The 5.11 TDU 1.75" Tactical Belt is an excellent option for securing skirmish gear in the field. This useful belt features a low profile plastic buckle and triple stitched nylon webbing that will hold its original color even after repeated washes and heavy outdoor use. If you’re looking for a durable tactical belt that is built to last and won’t let you down, look no further! To accommodate holsters, pouches, and additional accessories, order one size up for maximum comfort. Features: Non-Metallic buckle Superior Durability

5.11 Tactical TDU 1.5" Belt, Plastic Buckle, Extra Large, Black $17.99 The 5.11 TDU 1.5" Tactical Belt is an excellent option for securing skirmish gear in the field. This useful belt features a low profile plastic buckle and triple stitched nylon webbing that will hold its original color even after repeated washes and heavy outdoor use. If you’re looking for a durable tactical belt that is built to last and won’t let you down, look no further! To accommodate holsters, pouches, and additional accessories, order one size up for maximum comfort. Features: Non-Metallic buckle Superior Durability

Beeman 5039 1-Pc Adjustable Mount w/1" Rings, High, 9.5-11mm Dovetail $90.6 1" rings High profile Fits 9.5-11.5mm dovetail 4 hex screws/ring to secure scope Adjustable for windage & elevation Ideal for guns that need additional scope elevation The hex screws on the base let you adjust the base to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Beeman 5040 1-Pc Mount w/1" Rings, Medium, 9.5-11.5mm Dovetail $79.14 1" rings Medium profile Fits 11mm dovetail 4 hex screws/ring secure the scope Vertical scope stop pin (removable) Black matte finish Thehex screws on the base let you adjust the base to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

AirForce 1" Rings, High, 9.5-13.5mm Dovetail, See-Thru $24 1" rings High profile Fits 9.5 mm to 13mm dovetail See-thru mount Dual-position clamping system Threaded vertical recoil stop pin 4 hex screws/ring for securing scope Twice the clamping area of many conventional mounts Superior scope retention The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Leapers Accushot 1" Rings, High, 9.5-11.5mm Dovetail $11.99 1" rings High profile Fits 9.5mm to 11.5mm dovetail Vertical stop pin The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths. Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Bi-directional Offset Mount w/30mm Rings, High, 11mm Dovetail $16.79 1-piece bi-directional offset mount 30mm rings w/scope stop 11mm dovetail High profile 4 hex screws/ring 2 hex screws on base Mount in either direction 67mm integral base length 18mm wide 21mm saddle height Aircraft-grade aluminum Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Sports Match 1" Rings, High, Adjustable, 9.5-11mm Dovetail $103.19 1" rings High profile Fits 9.5mm to 11mm dovetail 4 hex screws per ring cap No scope-stop pin Adjustable for windage, elevation and height It’s rare to find so many features in scope rings, but these Sports Match rings have them! Your scope will be useful for more air rifles because these mounts can be adjusted in so many ways. No scope-stop pin, so don’t use this on powerful or heavy-recoiling spring-piston air rifles.

Centerpoint 1" Weaver/Picatinny Rings, Medium $15.54 1" Weaver/Picatinny rings Medium profile 4 hex screws per ring Mount a scope on your favorite airgun, airsoft gun or firearm with these 1" CenterPoint Weaver/Picatinny rings! Each ring has 4 hex screws that hold your scope firmly in place while you shoot. The base of each ring attaches to any Weaver/Picatinny rail equipped gun with a single large screw. Pick these rings up today!

CenterPoint 1-Pc Mount, 1" Rings, High, 3/8" Dovetail, 4 Screws/Cap $14.34 1" rings 1-pc mount High profile Fits 3/8" dovetail 4 screws/ring cap 3 hex screws secure the base Whether you hunt, target shoot or casually plink in your backyard, this 1-pc mount will secure your scope firmly to your gun. The mount fits a 3/8" dovetail with 3 hex screws. The rings have 4 hex screws per cap.

CenterPoint 1-Pc Mount, 1" Rings, Medium, 3/8" Dovetail, 4 Screws/Cap $14.34 1" rings 1-pc mount Medium profile Fits 3/8" dovetail 4 screws/ring cap 3 hex screws secure the base This 1-pc mount will secure your scope firmly to your gun. The mount fits a 3/8" dovetail and has 3 hex screws on the base. Each ring has 4 hex screws per cap.

Gamo 1" Rings, High, 3/8" & 11mm Dovetail, See-Thru $17.94 1" rings High profile 3/8" & 11mm dovetail See-thru mount Black matte finish The screw on the base lets you adjust the rings to fit 3/8" & 11mm dovetails. The clamp is made to securely fit a range of dovetail widths. Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers 30mm Rings, High, Weaver Mount, See-Thru $11.94 30mm rings Weaver mount High profile See-thru ring mount 4 hex screws/ring secure the scope 1 hex screw secures each ring to the gun Black matte finish Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers 30mm Rings, Medium, Weaver Mount, See-Thru $10.74 30mm rings Weaver mount Medium profile See-thru mount 4 hex screws/ring secure the scope 1 hex screw secures each ring to the gun Black matte finish Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Tech Force 1-Pc Mount, 1" Rings, 11mm Dovetail, See-Thru $15.54 1" rings Medium profile Fits 11mm dovetail See-thru base 4 hex screws/ring secure the scope Includes 2 hex wrenches The Tech Force mount is an economical one that will work on any gun that has an 11mm base or dovetail. Since it has 4 screws per cap, it’ll hold your scope tight, even on magnum spring air rifles.

UTG 1" Max Strength Quick Lock Rings, High, Weaver/Picatinny, 4 Hex Screws Per Ring Cap, See-thru $15.48 1" see-thru rings High profile Fits Weaver/Picatinny rails 4 hex screws per ring cap Mount a riflescope of your choice on any Weaver/Picatinny equipped airsoft gun, airgun or firearm. These UTG tactical rings have 4 hex screws that secure your scope while you shoot. The rings have a unique twist lock lever design for quick & easy installation on your gun. Pick up these rings and improve your gun’s accuracy today!

UTG 1" Max Strength Quick Lock Rings, High, Weaver/Picatinny, 6 Hex Screws Per Ring Cap, See-thru $17.4 1" see-thru rings High profile Fits Weaver/Picatinny rails 6 hex screws per ring cap Mount a riflescope on any Weaver/Picatinny equipped airsoft gun, airgun or firearm with these UTG tactical rings! These rings have 6 hex screws that firmly secure your scope while you shoot. Pick these up and improve your gun’s accuracy today!

1x26mm ITA Combat Red/Green Dot Sight, 1/2 MOA, 30mm Tube, Quick-Detach Low & High Weaver/Picatinny Mounts $55.14 ITA combat dot sight 1x magnification 26mm objective lens diameter 30mm tube Red or green illuminated dot (dot is black when not ill.) 4 MOA dot 1/2 MOA (1/2" click value @ 100 yds) WIndage/elevation adjustments Unlimited parallax adjustment 70′ field of view @ 100 yds Unlimited eye relief 22mm exit pupil 5.6 oz. 3.94" long Incl. flip-open lens covers, 3V CR1620 lithium battery, Allen wrench, hex screw, 2 quick-detach Weaver/Picatinny mounts, manual and cleaning cloth

Leapers Golden Image 4X32 Mini Size Range Estimating Mil-Dot Scope with Rings $35.94 4X32 mini size range estimating mil-dot scope Golden Image 4X32 mini with 5th Gen Body Mil-dot reticle, sapphire coating, classic elastic lens cover Specifications Magnification:4X Objective Dia.:32mm Field of View @100 yards: 28.0′ Eye Relief: 3.5" Exit Pupil: 6.0mm Click Value@100 yards: 1/4" Length: 7.7" Weight: 730g Battery: 10.8 oz Parallax Setting: @100yds Accushot Premium 1" Rings, Low, Weaver Mount, See-Thru. Specifications 1" rings Low profile See-thru mount Fits Weaver dovetail

Plano Single Scoped or Double Non-Scoped Rifle Case $39.54 Nothing looks cooler than a scoped rifle in a case! A Big Rifle Case! Plenty of room for all accessories. Comfortable molded-in handle Thick wall construction High density foam inserts Heavy-duty latches Lockable/airline approved Black Outside dimensions: 51.5"L x 15"W x 4"H Inside dimensions: 50.583"L x 10.851"W x 3.384"H You can fit two unscoped rifles or one scoped rifle (with a large profile scope). This is an oversized item and it will impact the cost of shipping

5.11 Tactical TDU 1.5" Belt, Plastic Buckle, Large, Black $17.99 The 5.11 TDU 1.5" Tactical Belt is an excellent option for securing skirmish gear in the field. This useful belt features a low profile plastic buckle and triple stitched nylon webbing that will hold its original color even after repeated washes and heavy outdoor use. The 5.11 Tactical Series features outstanding products for airsoft enthusiasts. Don’t run out of tie-down options in the field, this belt is built to last! To accommodate holsters, pouches, and additional accessories, order one size up for maximum comfort. Features: Non-Metallic Buckle Superior Durability Rugged Nylon Construction

Leapers UTG 4×32 Rifle Scope, Mil-Dot Reticle, 1/4 MOA, 1" Tube, 3/8" See-Thru Rings $41.94 Rifle scope 4x magnification 32mm objective lens (angled) 1" tube 1/4 MOA (1/4" click value @ 100 yds) Mil-dot reticle Sapphire lens coatings 35 yds parallax setting Finger-adjustable turrets 32′ field of view @ 100 yds 3.4" eye relief 8mm exit pupil 13.1 oz. 12.20" long Includes flip-open lens covers, 3/8" medium-profile rings, hex wrench, hex screw, cleaning cloth and owner’s manual Other features: True Strength scope Nitrogen-filled Shockproof Fogproof Rainproof

5.11 Tactical TDU 1.5" Belt, Plastic Buckle, Medium, Black $17.99 The 5.11 TDU 1.5" Tactical Belt is an excellent option for securing skirmish gear in the field. This useful belt features a low profile plastic buckle and is made with triple stitched nylon that will hold its original color even after repeated washes and heavy outdoor use. The 5.11 Tactical Series features outstanding products for airsoft enthusiasts. If you’re looking for a durable tactical belt that is built to last and won’t let you down, look no further! To accommodate holsters, pouches, and additional accessories, order one size up for maximum comfort. Features: Non-Metallic Buckle Superior Durability

5.11 Tactical TDU 1.5" Belt, Plastic Buckle, XXL, Black $20.39 The 5.11 TDU 1.5" Tactical Belt is an excellent option for securing skirmish gear in the field. This useful belt features a low profile plastic buckle and triple stitched nylon material that will hold its original color even after repeated washes and heavy outdoor use. The 5.11 Tactical Series are quality products at an outstanding value for airsoft enthusiasts. Don’t run out of tie-down options in the field, this belt is built to last! To accommodate holsters, pouches, and additional accessories, order one size up for maximum comfort. Features: Non-Metallic Buckle Superior Durability Rugged Nylon Construction

5.11 Tactical TDU 1.75" Belt, Plastic Buckle, Large, Black $17.99 The 5.11 TDU 1.75" Tactical Belt is an excellent option for securing skirmish gear in the field. This useful belt features a low profile plastic buckle and triple stitched nylon webbing that will hold its original color even after repeated washes and heavy outdoor use. The 5.11 Tactical Series features outstanding products for airsoft enthusiasts. Don’t run out of tie-down options in the field, this belt is built to last! To accommodate holsters, pouches, and additional accessories, order one size up for maximum comfort. Features: Non-Metallic Buckle Superior Durability Rugged Nylon Construction

5.11 Tactical TDU 1.75" Belt, Plastic Buckle, Medium, Black $17.99 The 5.11 TDU 1.75" Tactical Belt is an excellent option for securing skirmish gear in the field. This useful belt features a low profile plastic buckle and is made with triple stitched nylon that will hold its original color even after repeated washes and heavy outdoor use. The 5.11 Tactical Series features outstanding products for airsoft enthusiasts. If you’re looking for a durable tactical belt that is built to last and won’t let you down, look no further! To accommodate holsters, pouches, and additional accessories, order one size up for maximum comfort. Features: Non-Metallic Buckle Superior Durability

5.11 Tactical TDU 1.75" Belt, Plastic Buckle, XXL, Black $17.99 The 5.11 TDU 1.75" XXL Tactical Belt is an excellent option for securing skirmish gear in the field. This useful belt features a low profile plastic buckle and triple stitched nylon webbing that will hold its original color even after repeated washes and heavy outdoor use. The 5.11 Tactical Series features outstanding products for airsoft enthusiasts. Don’t run out of tie-down options in the field, this belt is built to last! To accommodate holsters, pouches, and additional accessories, order one size up for maximum comfort. Features: Plastic Buckle Superior Durability Rugged Nylon Construction XXL

5.11 Tactical TDU 1.75" Belt, Plastic Buckle, XXXL, Black $17.99 The 5.11 TDU 1.75" XXXL Tactical Belt is an excellent option for securing skirmish gear in the field. This useful belt features a low profile plastic buckle and triple stitched nylon webbing that will hold its original color even after repeated washes and heavy outdoor use. The 5.11 Tactical Series features outstanding products for airsoft enthusiasts. Don’t run out of tie-down options in the field, this belt is built to last! To accommodate holsters, pouches, and additional accessories, order one size up for maximum comfort. Features: Plastic Buckle Superior Durability Rugged Nylon Construction XXXL

UTG 1" Rings, Low, Weaver/Picatinny, Quick Lock $15.54 1" rings Low profile Fits Weaver/Picatinny rail 4 screws per ring cap Quick lock Includes 3mm hex wrench Special tape inside the rings keeps your scope tight without excessive clamp pressure. Quickly attach/remove these rings from your gun…no tools required! Just twist the hand-tightened knob, and the ring is ready to come off (or go on). Buy a bunch of these, keep your scopes in rings and easily move them from one gun to another.

BKL 1-Pc Adjustable Scope Mount, 1" Rings, 3/8" Dovetail, Black $79.8 1-pc scope mount 3/8" dovetail Low profile 1" rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8" side rails for mounting other accessories 2.5" of clamping length 4" overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz. 6 base screws Matte black Includes 3 hex wrenches Got barrel droop? This new mount will help you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails offer more space to add a laser and a flashlight to augment a scope.

BKL 1-Pc Adjustable Scope Mount, 30mm Rings, 3/8" Dovetail, Black $79.8 1-pc scope mount 3/8" dovetail Low profile 30mm rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8" side rails for mounting other accessories 2.5" of clamping length 4" overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz. 6 base screws Matte black Includes 3 hex wrenches Got barrel droop? This BKL Tech mount lets you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails give you room to mount a laser and flashlight.

UTG Accushot 3-12x44AO Compact Rifle Scope, Illuminated Mil-Dot Reticle, 1/4 MOA, 30mm Tube, Weaver/Picatinny Rings $119.99 Compact rifle scope 3-12x magnification 44mm objective lens (adjustable objective) 30mm tube 1/4 MOA (1/4" click value @ 100 yds) Mil-dot reticle (red-green illuminated) 10 yds to infinity parallax adjustment 32 ft to 10 ft field of view @ 100 yds 3.4" to 3" eye relief 13.0mm to 3.9mm exit pupil 23.1 oz. 11.10" long Use with full-size sidewheel (SCP-SW080-A) Includes flip-open lens caps and Accushot medium profile Weaver/Picatinny rings Other features: True Strength scope Nitrogen-filled Shockproof Fogproof Rainproof EZ-TAP illumination system Sidewheel-adjustable turret Emerald-coated optics

CenterPoint AR22 Series 4x32mm duplex reticle rifle scope, 3/8" rings $35.99 Rifle scope Power: 4x Obj. Lens Dia (mm): 32 AO: N Illum. Reticle: N Reticle: Duplex Field of View (ft. at 100 yds): 28.0 Eye Relief (in.): 3.0 Exit Pupil (mm): 6.0 Parallax Setting (yds): 30 yds W/E Adjust Click Value: 1/4 M.O.A Tube Size: 1" Length (in.): 10.5 Weight (oz.): 12.9 Rings Included: 3/8" dovetail rings Lens Covers: Elastic Sun Shade: N Duplex reticle Tool-free, finger adjustable windage and elevation dials Includes lens covers and medium profile premium rings One piece tube construction CenterPoint’s Advantage lens coating reduces light loss and limits glare, while allowing optimum light transmission Ergonomically designed grips for fast focus eyepiece and magnification Duplex reticle 100% waterproof, fogproof and shockproof

UTG 30mm Max Strength Rings, Low, Weaver/Picatinny, See-Thru, Twist-Lock Base $17.94 30mm rings Low profile Fits Weaver/Picatinny rail 4 screws/ring cap secures your scope See-thru Black matte finish Twist-Lock base screw to rapidly mount and dismount These UTG rings make it easier to quickly mount and dismount your optical devices on different guns. Instead of working with several hex screws on each ring base, you just have to hand-tighten one twist-lock base screw on each ring and you’re good to go. Also, the weight has been reduced by channeling out the center of each cap. Use on any air gun, airsoft gun or firearm that has a Weaver or Picatinny rail. The cross-slots help stabilize the rings so your scope or dot sight is rock-solid.

UTG 30mm Quick-Detach Max Strength Rings, Medium, Weaver/Picatinny, See-Thru $21.54 30mm rings Medium profile Fits Weaver/Picatinny rail 6 hex screws per ring secure your scope Quick-detach lever on each ring for quick attachment & removal See-thru Special tape inside the rings keeps your scope tight without excessive clamp pressure! Aircraft-grade aluminum is just one of the things that makes this Leapers UTG scope mount different from all the others. The see-thru saddle plus the open architecture cap lightens the weight of the rings even more. One of the best features is the quick-detach lever lock on the side of each ring. Just pop the lever to remove your mount from a gun and simply push it back down to attach it to your gun.

1×32.5mm ITA Combat Red/Green Dot Sight, 1/2 MOA, 38mm Tube, Quick-Detach Weaver/Picatinny Mounts $59.4 ITA combat dot sight 1x magnification 32.5mm objective lens diameter 38mm tube Red or green illuminated dot (dot is black when not ill.) 4 MOA dot 1/2 MOA (1/2" click value @ 100 yds) Windage & elevation adjustments Unlimited parallax adjustment 100′ field of view @ 100 yds Unlimited eye relief 26mm exit pupil 7.1 oz. 4.25" long Incl. flip-open lens covers, 3V CR1620 lithium battery, mounts, Allen wrench, hex screw, 2 quick-detach Weaver/Picatinny mounts, manual and cleaning cloth Other features: Patterned illumination rheostat Variable brightness levels Integral sunshade Instant lock-on target feature High-tech emerald coatings 2 quick-detach Weaver/Picatinny mounting deck High-profile cantilever mount Low-profile vertical mount Fits Weaver/Picatinny rail

Leapers Golden Image 4X32AO Rifle Scope, Mil-Dot Reticle, 1" Tube, Weaver Rings $47.99 True Strength Revolutionary Triple S Structure (Smart Spherical Structure) for the most effective telescopic functions Rifle scope Full size, adjustable objective scope, from 7.5 yards up 5th Gen square knob housing and finger adjustment knobs Mil-dot range estimating reticle Complete with flip-open lens caps, 2" sun shade and RGWM-25L2 AccuShot tactical rings SpecificationsMagnification: 4XTube Dia.: 1"Objective Dia.: 32 mmField of View @100 yards: 34′Eye Relief: 3.5"Exit Pupil: 8.0 mmClick Value@100 yards: 1/4"Length: 11.8"Weight: 12.9ozParallax Setting: 7.5 yds – infinity The rings have 2 screws per cap. Please Note: The mounts that are included are Weaver mounts, intended for airsoft gun mounting. If you wish to mount this scope on a 3/8 (11mm) Dovetail base, you will need different mounts. We recommend the following: Accushot Medium Profile Airgun Rings Accushot Medium Profile Full Length Integral Mount Weaver intermount for Benjamin Sheridan rifles

1x34mm ITA Combat Red/Green Dot Sight, 1/2 MOA, 30mm Tube, Quick-Detach Low Weaver/Picatinny Mount $59.99 ITA combat dot sight 1x magnification 34mm objective lens diameter 30mm tube Red or green illuminated dot 1/2 MOA (1/2" click value @ 100 yds) Windage/elevation adjustments 60′ field of view @ 100 yds Unlimited eye relief 28mm exit pupil 6.7 oz. 6.4" long Incl. flip-open lens covers, 3V CR1620 lithium battery, Allen wrench, hex screw, quick-detach Weaver/Picatinny mount, manual and cleaning cloth