Gujarat STATES: The Surat diamond industry begins to glow again But the high cost of rough diamonds put pressure on margins. Industry Surat Diamond in which he faced a tough last years is on the road with a revival of the 20 percent increase in export orders, as Mr. Rohit Mehta, President, Surat …
Low pressure chamber

RWS Chamber Lube, .50 oz. $9.59 For use recommendations, click the link for the manual in the right column. RWS Chamber Lube .50 oz. Synthetic oil Safe for any airgun powerplant

Crosman Silicone Chamber Oil $5.99 Silicone oil .25 oz. Also known as RMCOIL Safe for any airgun powerplant

Air Venturi Inline Air Pressure Gauge, 0 to 4500 psi $55.19 Inline air pressure gauge Measures up to 4500 psi Female quick-disconnect Male fitting If you use high-pressure fill devices for your precharged pneumatic guns and don’t have a pressure gauge on your fill device, this will do the job. The inline air pressure gauge fits the Air Venturi carbon fiber tank, AV-4500HPT.

Walther Shot Spot Universal Laser, Remote Pressure Switch $22.74 Universal Laser Shot Spot Class IIIA laser 635-655 nm

Air Venturi Tank Adapter Assembly, 4500 psi, for High-Pressure SCBA Tanks $105 Tank adapter assembly Fits high-pressure scba (self-contained breathing apparatus) tank, including the Air Venturi carbon fiber tank 4500 psi Includes bleeder, hose and female quick-disconnect coupling Does not include a manometer (air pressure gauge) Fits the Air Venturi carbon fiber tank–AV-4500HPT [PY-A-350]. Inline manometer (air pressure gauge) sold separately–AV-00031 [PY-A-3865]. Suitable for connecting your high-pressure scba tank to a precharged pneumatic air rifle.

UTG LS269 Green Laser, Remote Pressure Switch, Handheld or Weaver Mount $119.94 UTG LS269 green laser 3R Class 1,000 meters range (1,090+ yards) 3,000 hrs laser life 530-540nm wavelength 2.5-4.0 mW output 480 mins. battery life 96cm beam movement @ 10 meters 10-12mm beam diameter @ 15 meters 59 deg. F to 95 deg. F operating temp. Twist-on, push-button momentary switch & remote pressure switch on/off True Strength platform Aluminum body 3.0 oz. .76" dia. 4.72" long Includes one CR123A lithium battery & Weaver/Picatinny mount Black

UTG Deluxe Tactical Red Laser Sight, Weaver/Picatinny Mount, Remote Pressure Switch $33.54 UTG red laser Push-button on/off switch and remote pressure switch Windage and elevation adjustments Class 3R laster 2.5-3.1mW output 630-640nm wavelength 15-20mm beam dia. @ 15 meters 14 deg. F to 113 deg. F operating temperature 80 mins. of battery operating time 500 meters laser range 6000 hrs laser lifetime .8 oz. w/batteries 2.4 oz. w/batteries, tail cap assembly .55" dia. body 2.64" long Incl. Weaver/Picatinny mount, button batteries, screwdriver, hex wrench & pressure switch Mount this red dot sight on any air pistol, firearm or airsoft gun for enhanced target acquisition. Get up to 6,000 hrs of life from this tactical red dot sight!

Leapers Xenon Flashlight, 95 Lumens, Integral Weaver Mount, Pressure Switch & Battery $29.99 Deluxe flashlight with integral Weaver mount Up to 95 lumens Durable and compact – a mere 4 5/8 inches and 6.5 oz Precision machined 1 piece aircraft-grade aluminum tube Anodized black matte finish Integral Picatinny/Weaver style mounting deck Tool free attachment with knurled nut and locking plate Adjustable focusable beam Complete with remote pressure switch Two 3-volt Lithium batteries are included.

AireTex 45 Gasoline Air Compressor, Max 4500 PSI, Incl. Scuba Yoke & 300 DIN Hose $4314 The compressor may not look exactly like the one shown here. AireTex 45 gasoline air compressor 4500 PSI max working pressure 3-stage, 3-cylinder compressor Stainless steel valves Low-speed operation Stainless steel intercoolers & after-cooler Dual-stage water separator Purifier meets or exceeds CGA G7.1 Grade E and NFPA 1500 standards Mechanical separator removes particles, oil mist & water droplets Suitable for breathing air Purifier chamber rated for 5000 PSI operation Activated carbon removes tastes & odors Catalyst converts carbon monoxide to carbon dioxide Motor overload shutdown Hour meter 15,000 cu. ft. filtration system Includes standard scuba yoke & 300 DIN filler hose AireTex compressors are as durable and reliable as they are portable. This gasoline compressor gives you max 4500 PSI at less than 10 degrees above ambient room temperature! It takes about 23 minutes to fill an 80 cu ft air bottle. Use only for filling scuba tanks and other high-volume devices. Do not connect directly to an airgun reservoir, as it will fill too fast and heat up. When filling air bottles, do not leave the compressor unattended!

AireTex 45 Electric Air Compressor, Max 4500 PSI, Incl. Scuba Yoke & 300 DIN Hose $4074 AireTex 45 electric air compressor 4500 PSI max working pressure 3-stage, 3-cylinder compressor Stainless steel valves Low-speed operation Stainless steel intercoolers & after-cooler Dual-stage water separator Purifier meets or exceeds CGA G7.1 Grade E and NFPA 1500 standards Mechanical separator removes particles, oil mist & water droplets Suitable for breathing air Purifier chamber rated for 5000 PSI operation Activated carbon removes tastes & odors Catalyst converts carbon monoxide to carbon dioxide Motor overload shutdown Hour meter 15,000 cu. ft. filtration system Requires 220V electrical outlet Includes standard scuba yoke & 300 DIN filler hose The AireTex 45 electric compressor is a top-rated machine that easily fills up scuba tanks and large carbon fiber tanks. The purifier is rated for 50 hours of run time. The compressor outputs 4.20 cubic feet per minute. It runs at 1100 RPM and has over 50 feet of stainless cooling coils. It takes about 23 minutes to fill an 80 cu ft air bottle. Use only for filling scuba tanks and other high-volume devices. Do not connect directly to an airgun, as it fills too fast and heats up. When filling air bottles, do not leave the compressor unattended!

Air Arms MPR Air Tank, Built-in Gauge $171.52 MPR air tank Built-in air pressure gauge (manometer)

Gamo Air Gun Oil $3.54 This is the recommended oil for your Gamo airgun. General purpose oil for all airguns. The dispenser has a fine tip for lubricating small areas and moving components. DO NOT USE IN SPRING PISTON CHAMBER. Always make sure your airgun is unloaded before cleaning or oiling.

UTG Deluxe Ergonomic Foregrip, Black $11.94 Deluxe ergonomic foregrip Non-slip Complete with battery compartment, pressure switch housing and Picatinny mounting deck

O-Ring Set – 0099-B Replacement O-rings, 4 $4.5 0099-B replacement O-rings (4) 0099-B O-Ring replacement set for BSA high pressure probes.

O-Ring Set – 0099-W Replacement O-rings, 4 $4.5 O-Ring replacement set for Evanix, FX, Logun and Raider high pressure probes

RWS Rifle Shooter’s Kit, .177 Caliber $43.19 Kit provides everything needed to shoot and maintain your RWS .177 airgun: Jointed Cleaning Rod, Chamber Lube, Spring Cylinder Oil, Oiling Needle, .177 Jag, .177 Bore Brush, 1 tin each/250 Meisterkugeln & Superdome Pellets, 25- .177 cleaning pellets and four 10 meter – 4" x 4" targets.

RWS Rifle Shooter’s Kit, .22 Caliber $43.19 The RWS Shooter’s Kit contains everything you need to maintain your .22 caliber air rifle. Includes: 3-piece cleaning rod .22 caliber jag .22 caliber brush 1/2-oz RWS chamber lube 1-oz RWS spring cylinder oil 10-meter distance targets (10 targets) RWS Superdome pellets (500-count) .22 caliber cleaning pellets (25-count) 3" needle to apply lubricant

Air Venturi MP-5 Oil, Metalophilic, 4oz. $5.99 Metalophilic MP-5 oil Prevents rust & corrosion 4 oz Air Venturi Metalophilic MP-5oil penetrates the smallest crevices of your airgun and protects against corrosion and rust. This oil neutralizes sweat and salt and doesn’t trap moisture. This oil eventually dries into a non-gumming, lubricating film which lasts through almost indefinite storage. Extend the life of your airgun and pick up this rust inhibiting oil today! ATTENTION: Do NOT use Metalophilic MP-5 oil in the compression chamber of spring-piston airguns.

UTG Deluxe Ergonomic Foregrip, OD Green $11.94 Deluxe ergonomic foregrip OD Green Non-slip Picatinny Mounting Deck to Slide on and Screw Tight Complete with battery compartment, pressure switch housing and Picatinny mounting deck Tactical Pattern Accenting a Cool Look Practical Side Slides Allow for Ambi Use of Pressure Pad

UTG Red Laser, Integral 3/8" Dovetail Mount w/Adjustable Clamping $33.54 Red laser TS platform & SSS structure for durability Aim & instant-lock for precision Ambidextrous push-button switch & remote pressure switch Anodized black matte finish Uses 4 AG-13 (LR44) alkaline button batteries Includes 3/8" dovetail mount with adjustable clamping pressure

Leisure Pro Scuba Tank, K Valve, 80 cu ft, Aluminum, 3000 psi $299.99 Scuba tank K valve 80 cu ft Aluminum 3000 psi maximum pressure Shipped empty Yellow exterior color

Tech Force Spring Gun Cleaning Kit with Seals, Mainspring, Oil + More $11.46 Tech Force cleaning kit Suitable for various Tech Force spring-piston airguns 6 leather seals: fit TF S2-1, TF24, FT15, TF39 & TF49 1 mainspring: fits TF15, TF39 & TF49 1 safety: fits TF15, TF39 & TF49 Also includes oil* in a spout-top squeeze bottle, segmented cleaning rod, nylon brush & cloth mop *The oil is not chamber lube. It’s a petroleum-based oil for wiping down the exterior of your gun to remove fingerprints and leave a protective coating on wood and metal surfaces.

Air Arms Degassing Tool, Fits Air Arms S200 Air Rifles $21.54 Degassing tool Fits S200 air rifles Need to get rid of the high-pressure air in your Air Arms S200 air reservoir? This degassing tool will help you do it safely and quickly.

UTG Premium 1" Rings, Low, Weaver Mount, See-Thru $8.7 1" rings Low profile See-thru mount Fits Weaver dovetail Special tape inside the rings keeps your scope tight without excessive clamp pressure!

UTG 30mm Rings, Low, Weaver Mount, See-Thru $11.99 30mm rings Low profile Weaver mount See-thru Anodized black matte finish Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Walther Flashlight $35.99 Walther Tactical flashlight Weaver rings Install on Beretta XX-Treme and Desert Eagle Remote pressure switch 60 lumen brightness 3.0 V lithium batteries (two CR123A batteries included)

Benjamin Hand Pump, Fits Crosman & Benjamin PCP Guns $214.8 3-stage hand pump Made specifically for the Crosman/Benjamin PCP pistols & rifles (fits any brand of PCP gun with a male Foster quick-disconnect on its reservoir) Includes a female Foster quick-disconnect on the end of the pump hose Goes up to 3600 psi (although some of the guns listed above operate on a max pressure of 2000 or 3,000 psi) With other hoses, pump can be adapted to other PCPs Requires less effort than other pumps Integral air pressure gauge Moisture filter

Replacement Air Reservoir, Fits Feinwerkbau P700 Air Rifles $387.46 Feinwerkbau replacement air reservoir Built-in manometer (air pressure gauge) 2900 psi max air pressure (200 bar) Fits all Feinwerkbau P700 PCP air rifles Instead of carrying a bulky fill tank or a hand pump, take along a spare air reservoir. Fill it up before your match and avoid lugging extra baggage. Same high-quality construction as the original tank that came with your FWB P700 air rifle.

UTG Long Range Spot Focus LED Flashlight, Quick-Detach Integral Mounting Deck $95.99 Tactical flashlight 5-function LED flashlight 40mm IRB LED bulb 3 brightness levels (low/50 lumens, medium/100 lumens, high/200 lumens) Highly focused beam 800 yds effective illumination 90 mins. max battery operating time 3 settings: push-button on, twist-on, remote pressure switch Rolling stop shoulder 1.07" dia. body 7.13" long 9.60 oz. 6V Aircraft-grade aluminum body Incl. 2 CR123A batteries, remote pressure switch, push-button on/off tail switch, quick-detach Lock Lever Weaver/Picatinny mount & manual WARNING: Follow battery safety procedures when you use your flashlight. Leaving operating lights in gun cases or any other confined areas with minimal heat dissipation will cause overheating and possibly battery explosion. Always make sure your light is off and will not be accidentally turned on during storage or transportation. For products equipped with a pressure switch, improper placement of the pressure switch on your gun may activate your flashlight when stored in a gun case or other confined areas. Always make sure the pressure switch is fastened to your firearm in a way that it will not be accidentally pressed and activate your flashlight, causing overheating and safety issues.

UTG Leapers Premium 1" Rings, High, Weaver Mount, See-Thru $14.34 Limited Lifetime Warranty 1" rings High profile See-thru mount Fits Weaver dovetail 4 hex screws/ring secure the scope Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Centerpoint 1" Rings, Medium, 3/8" Dovetail $14.39 1" rings Medium profile Fits 3/8" dovetail 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Hawke 1" Rings, Weaver, Low, Black $15.59 1" rings Low profile Fits Weaver/Picatinny rail 4 screws per screw cap, 1 screw per base Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers 30mm Rings, High, 3/8" Dovetail $11.99 Limited Lifetime Warranty 30mm rings High profile Fits 3/8" dovetail 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers 30mm Rings, Medium, 3/8" Dovetail $11.99 30mm rings Medium profile Fits 3/8" dovetail 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1" Rings, Medium, 3/8" Dovetail, 2 Screws/Cap $10.79 1" rings Medium profile Fits 3/8" dovetail Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1" Rings, Medium, 3/8" Dovetail, 4 Screws/Cap $11.99 1" rings Medium profile Fits 3/8" dovetail 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Premium 1" Rings, Medium, Weaver Mount, See-Thru $11.99 Limited Lifetime Warranty 1" rings Medium profile See-thru mount Fits Weaver dovetail 4 hex screws/ring secure the scope Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Air Venturi Thumbhole Stock, Fits Older AirForce Rifles & Tanks $47.99 Thumbhole stock Fits older AirForce Airguns Condor, Talon & Talon SS rifles & tanks* Easily attaches to gun’s pistol grip & high-pressure air tank buttplate (does not fit CO2 tank) No machining required *Does not fit the newer AirForce guns or tanks with the Spin-Loc feature.

Walther PPK/S magazines, 3 Clips 15 BBs/clip, Save $3.00 + Time! $15.54 Why do I need extra clips? Magazines for the PPK/S are made of plastic. The CO2 gas, under pressure, is in a liquid form and thus extremely cold and weakens plastic. By allowing the plastic to warm up for several minutes you allow it to regain its elasticity and add hundreds of shots to the life of the magazine. U-58062

Leapers Accushot 1-Pc Mount w/1" Rings, 3/8" Dovetail $17.94 1" rings Medium profile Fits 3/8" dovetail 100mm base length 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Mount w/1" Rings, High, 11mm Dovetail $21.54 1" rings High profile Fits 11mm dovetail 4 hex screws/ring secure the scope 100mm base length 80mm between rings Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Mount w/30mm Rings, High, 11mm Dovetail $17.94 Limited Lifetime Warranty 30mm rings High profile Fits 11mm dovetail 4 hex screws/ring secure scope 100mm base length Vertical stop pinSpecial tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Mount w/30mm Rings, Medium, 3/8" Dovetail $17.34 30mm rings Medium profile Fits 3/8" dovetail 100mm base length 3 hex screws/ring secure the scope Vertical stop pin Limited lifetime warranty Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Crosman 12 Gram CO2, 100 Cartridges $67.19 Since CO2 cartridges are under pressure, we cannot ship them via air. Please consider that when choosing your shipping method Crosman invented the CO2 Powerlet and is the recognized leader in this field! Put Crosman 12-gram CO2 Powerlets in any airgun that uses 12-gram CO2 cartridges.

Axsor PCP hand pump $238.8 3-stage hand pump Pumps to 3000 psi Integral air pressure gauge Built-in moisture trap Includes a hose ending in female 1/8" BSPP threads Buy optional adapters for pumping AirForce and other brands of PCP guns

Air Venturi Microbore Hose, DN2, Up to 4500 PSI, 1/8" BSPP Connectors, 24" Long $35.99 DN2 microbore hose Fits high pressure tanks and hand pumps Max operating pressure is 4500 psi 1/8" BSPP male & female connectors 24" long Microbore hoses are a great way to get air into your gun without having to fill up a large-diameter hose, which is what traditionally comes with fill equipment such as scuba tanks and hand pumps. Our microbore hose fills your gun faster so you can spend more time shooting and less time filling.

Carbon Fiber Tank, 4500 psi, 88 cu ft $839.99 DOT-approved Carbon fiber filament wound over aluminum bladder 88 cu ft 4500 psi max pressure 11.3 lbs dry weight Includes: Hose with 1/8" BSPP threads on both ends Seal washer Hose has an inline gauge (eliminates use of a yoke) Air Venturi female quick-disconnect adapter with 1/8" BSPP male threads on one end This is not a scuba tank. It’s a carbon fiber tank, which is also called an scba tank, and has a high-pressure scba valve…like the one firefighters use on their scba tanks. Many dive shops do not have the ability to fill these tanks. In some towns, the fire department has a compressor that can fill a high-pressure carbon fiber tank, as firefighters use smaller scba tanks for breathing equipment during rescues. You might want to approach your local fire department and ask if they would be willing to fill your high-pressure carbon fiber/scba tank from their compressor. Another alternative is to contact a local paintball store, as paintballers use carbon fiber tanks to fill their markers. If the only alternative you have is to fill your high-pressure carbon fiber scba tank at a dive shop, a 1/8" BSPP male to DIN female adapter (our part # AA-Z2128-300) can temporarily replace the hose on the valve adapter so the dive shop can fill your tank.

Benjamin Carbon Fiber Tank, 54 cu ft, Gauge, Hose w/Female Quick-Disconnect $719.99 Benjamin carbon fiber tank 54 cu-ft capacity 4,500 psi max pressure 38" long 12" microbore hose with female quick-disconnect Built-in air pressure gauge (manometer) Bleed valve Restricted-flow manifold for controlled, precise filling Lightweight, easier to transport than a metal scuba tanks 4.625"x37" 15 lbs. This monster carbon fiber air tank will keep you in air for days, weeks…and probably months! Fill all your precharged pneumatic (PCP) air pistols and air rifles and shoot day and night. Depending on the size of your gun’s onboard reservoir, you’ll get up to 80 fills with this big boy.

Benjamin Carbon Fiber Tank, 90 cu in, Gauge, Hose w/Female Quick-Disconnect $479.99 Benjamin carbon fiber tank 90 cu in capacity 4,500 psi max pressure 15" long 12" microbore hose with female quick-disconnect Built-in air pressure gauge (manometer) Bleed valve Restricted-flow manifold for controlled, precise filling Lightweight, easier to transport than a metal scuba tank 4.625"x14.625" 4.6 lbs. Have you resorted to carrying a steel or aluminum buddy bottle to refill your PCP air guns in the field? You’ll get even more refills from this carbon fiber tank since it’s 4,500 psi. Plus, it doesn’t weigh as much. Depending on the size of your airgun’s onboard reservoir, you could get up to 16 fills before you have to refill this tank.

AirForce Spin-Loc Standard Air Tank, Fits AirForce Talon & Talon SS Rifles $246.6 Spin-Loc standard air tank Connects to an AirForce Talon/Talon SS rifle without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

AirForce Spin-Loc Hi-Flo Air Tank, Fits .177 AirForce Condor Rifles $270 Spin-Loc Hi-Flo air tank Connects to .177-caliber* AirForce Condor rifles without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted** to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *The Condor’s Hi-Flo tank is caliber-specific. **To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

AirForce Spin-Loc Air Tank, Fits TalonP Air Pistols $188.1 Spin-Loc air tank Connects to an AirForce TalonP pistol without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings 6.125" long Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

AirForce Spin-Loc Micro-Meter Air Tank, Fits AirForce Sporting Rifles $246.6 Spin-Loc Micro-Meter air tank Connects to an AirForce Talon/Talon SS or Condor rifle without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings 10.875" long Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

UTG Ambidextrous Foldable Foregrip $20.34 Foldable tactical foregrip with 5 adjustable positions to allow for versatile shooting positions and enhance target lock performance under toughest environments Press the position button to fold forward/backward and release the button to lock in desired position Designed to mount on any picatinny/weaver rail with ergonomic and non-slip features for superior control of weapon Ambidextrous design, complete with battery/tool compartment and pressure switch housing

Air Venturi Female Quick-Disconnect Adapter, 1/8" BSPP Male Threads, Steel, Rated to 5000 PSI $23.4 Female quick-disconnect adapter 1/8" BSPP male threads on the other end Steel Rated for 5000 PSI This female steel quick-disconnect adapter has 1/8" BSPP male threads on the other end. Rated to a whopping 5,000 PSI, it’ll work for those guns that run on much higher pressure air.

AirForce PCP Hand Pump, for AirForce Rifles, Incl. Hose + Adapter, Pumps up to 3600 psi $234.9 Fits AirForce Condor, Talon & Talon SS rifles. 3-stage hand pump Does not heat up with constant use Requires less effort than other pumps Goes up to 3,600 psi Integral air pressure gauge Moisture filter Incl. 11" braided steel hose with female quick-disconnect coupling and AirForce fill adapter with male quick-disconnect coupling Every pump tested by the manufacturer

Air Venturi Scuba Tank, 80 cu ft, Aluminum, Deluxe Valve, 3,000 psi, Black $239.99 Scuba tank K valve 80 cu ft Aluminum 3,000 psi maximum pressure (206 bar) Shipped empty Black Indicator shows if valve is open or closed If you shoot precharged pneumatic guns, you’ll need an air source. A scuba tank is a great way to store lots of air to pressurize all your guns.

Aftermath LS635 SOCOM Tactical Laser $23.94 The Aftermath LS635 SOCOM Tactical Laser allows airgunners to locate targets in the battlefield quickly and accurately with ease. This shockproof laser includes a 3/8� and a 5/8� mount compatible for weaver style bases. The Aftermath LS635 SOCOM Tactical Laser also includes (3) 1.5v LR44 batteries and a pressure sensitive on/off switch and cable. 2.5" long .75" diameter

Benjamin Scuba Yoke, DIN Valve $155.99 Benjamin scuba yoke Attaches to a scuba tank with a DIN valve Female quick-disconnect coupling on end of hose Includes air pressure gauge (manometer) Fits all Crosman & Benjamin PCP air rifles Fits other PCP guns that have a male quick-disconnect fitting No matter which Crosman or Benjamin precharged pneumatic air gun you own, this scuba yoke will connect your gun to a scuba tank with a DIN valve.

AirForce Scuba Tank Adapter K-valve, Steel Hose $102.6 AirForce Airguns scuba tank adapter K-valve Pressure gauge goes up to 3,000 psi Stainless steel mesh hose* Ends in a female quick-disconnect *While the hose is stainless steel mesh, it MAY also have a black plastic cover. Which one you get depends on what we have in stock.

AirForce Scuba Tank Adapter, DIN Connector, Steel Hose $102.6 AirForce Airguns scuba tank adapter DIN connector Pressure gauge goes up to 3,000 psi Stainless steel mesh hose* Ends in a female quick-disconnect *While the hose is stainless steel mesh, it MAY also have a black plastic cover. Which one you get depends on what we have in stock.

Benjamin Scuba Yoke, K-Valve $137.94 Benjamin scuba yoke Attaches to a scuba tank with a K-valve Female quick-disconnect coupling on end of hose Includes air pressure gauge (manometer) Fits all Crosman & Benjamin PCP air rifles Fits other PCP guns that have a male quick-disconnect fitting No matter which Crosman or Benjamin precharged pneumatic air gun you own, this scuba yoke will connect your gun to a scuba tank with a K-valve.

Air Venturi 1/8" BSPP Self-Centering Bonded Seal, .375" Inside Diameter $5.94 1/8" BSPP seal Self-centering bonded seal Seals against high-pressure air leaks Use between 1/8" BSPP connections with flat mating surface around threads Reusable Buna-N (nitrile) seal inside a steel washer .375" inside diameter Reliable up to 4,500 psi (310 bar) When compressed, forms a seal between the flat surfaces around the fastener shank.

Crosman Pellgunoil $3.59 Do NOT use in precharged pneumatic (PCP) airguns! Pellgunoil is NOT safe for use in guns that use high-pressure air! Using Pellgunoil in a PCP could be explosive and may result in serious injury or death. For CO2 & multi-pump pneumatic guns Put a drop on the tip of every third 12-gram or 88-gram CO2 cartridge before inserting it Frequently apply a drop of Pellgunoil to the pump head of a multi-pump pneumatic gun Seals the gun

AirForce CO2 Adapter, Fits Condor, Talon & Talon SS $119.94 Fits all Condor, Talon and Talon SS rifles Over 1,000 shots per CO2 tank Ideal for shooting indoors Easy to switch back to air No handpump or scuba tank required Quieter operation How to switch from high-pressure air to CO2: Unscrew your AirForce air tank from your rifle Screw in the CO2 adapter into your rifle Screw in the filled tank into the other end of the adapter Start shooting!

Leapers Accushot 1" Rings, High, 9.5-11.5mm Dovetail $11.99 1" rings High profile Fits 9.5mm to 11.5mm dovetail Vertical stop pin The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths. Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Bi-directional Offset Mount w/30mm Rings, High, 11mm Dovetail $16.79 1-piece bi-directional offset mount 30mm rings w/scope stop 11mm dovetail High profile 4 hex screws/ring 2 hex screws on base Mount in either direction 67mm integral base length 18mm wide 21mm saddle height Aircraft-grade aluminum Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Airsoft Innovations Compact Gas Can Filling Device $51.54 Compact gas can filling device Removable top cap Reusable high strength pressure vessel NC machined metal parts w/ relief valve 5.25�x1.75� 5.64 oz Incl. GBB oil Carrying gas-powered airsoft guns in the battlefield? Pick up this Airsoft Innovations filling device to allow your gun to fire continuously during intense airsoft wars. This filling device is compact and fits comfortably in most flashbang pouches.

Air Venturi G4 Hand Pump, Hose with 1/8" BSPP Threads $239.99 G4 hand pump Pumps to 3,335 psi/230 bar (use only the correct pressure rated for your gun) 23" hose ends in 1/8" BSPP threads Tube lock prevents separation during transport Moisture filter Ergonomically designed handle Compartment in handle holds spare parts 1/8" BSPP threads Wide footplate with adjustable pumping angle

Gamo 1" Rings, High, 3/8" & 11mm Dovetail, See-Thru $17.94 1" rings High profile 3/8" & 11mm dovetail See-thru mount Black matte finish The screw on the base lets you adjust the rings to fit 3/8" & 11mm dovetails. The clamp is made to securely fit a range of dovetail widths. Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers 30mm Rings, High, Weaver Mount, See-Thru $11.94 30mm rings Weaver mount High profile See-thru ring mount 4 hex screws/ring secure the scope 1 hex screw secures each ring to the gun Black matte finish Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers 30mm Rings, Medium, Weaver Mount, See-Thru $10.74 30mm rings Weaver mount Medium profile See-thru mount 4 hex screws/ring secure the scope 1 hex screw secures each ring to the gun Black matte finish Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1" Rings w/Deluxe Tactical Tri-Rail, 3/8" Dovetail $31.14 Fits 3/8" dovetail 1" rings Provides 3 Weaver/Picatinny rails for accessories 4 screws/ring secures the mount Optimized rail spacing for stable, adequate mounting Special tape inside the rings keeps your scope tight without excessive clamp pressure!

AirForce LS-1 Laser, Waterproof & Shockproof $119.94 LS-1 red laser 1/2" dot at 10 yds, 4-1/2" dot at 100 yds Remote pressure pad with accordion cord Shockproof Waterproof Knurled adjustment/locking screws with coin-slot No special tools required to align beam Can be used on airguns, airsoft guns & firearms Includes 3-volt CR123A lithium battery 2.8 oz (with battery) 2.95"x1.34" Black matte finish

Gamo Red Laser Sight, Weaver Ring $42.6 3R Class red laser 3-5mW output 635nm wave length 0 to 2.0mm focus range 10mm beam size at aperture 30mm beam size at nearest focus 11.3mm dot size at 10 yds 50 yds visibility/indoor light 100 yds visibility/outdoor night Black matte finish 5.82 oz. 4.53" long 1.26" high Incl. Weaver ring, two 1.5-volt LR44 batteries, hex wrench set, momentary pressure switch & instruction manual

Smith & Wesson 38 Special Series Black Frame With Smoke Lens Safety Glasses $9.59 The 38 Special Series safety glasses feature shatter-resistant polycarbonate lenses that provide the ultimate in impact and ultraviolet protection. Comes in a Black Frame and Smoke Lens. Exceeds ANSI Z87.1 -2003 safety standards Ergonomic contoured temples w/ pressure pads Precision frame w/ matte black finish Polycarbonate safety glasses protect your eyes from impact, but the glasses deteriorate due to scratches, light, etc., and should be replaced after 2 years.

Beretta Laser, Fits 92FS Pellet Pistol $31.19 Laser Fits Beretta 92FS pellet pistol Clamps under the barrel Screw mount On/off LED indicators Increase the accuracy of your Beretta 92FS CO2 pellet pistol with this laser. It slides on under the barrel and holds with clamping pressure (screws tighten the mount). Not suitable for the Beretta Elite II air pistol or any handgun that has an accessory rail under the barrel.

BSA Laser Sight With MTS $35.99 Red dot 11.3mm dot size at 10 yds 650nm laser beam 5mW (maximum legal power) Visible at 50yds (indoors, lit) & 100yds (outdoors, night) fits both Weaver & 11mm dovetail bases Two switches* *One switch is located on top of the body and the other, a momentary pressure sensitive switch and wire, can be mounted on the gun wherever you want to put it.

Gamo Laser and Light with 1" Scope Mount $47.99 Laser specs: 3R Class 5mW output 11.3mm dot size at 10 yds Visible up to 50 yds/indoor light Visible up to 100 yds/outdoor night 1.73 oz. 2.95" long .91" high Flashlight specs: 80 lumens 1.94 oz. 2.76" long 1.26" high Includes: 1" scope mount Two 1.5-volt LR44 batteries Hex wrench set Momentary pressure switch Instruction manual

AirForce Spin-Loc Hi-Flo Air Tank, Fits .20, .22 & .25 AirForce Condor Rifles $270 Spin-Loc Hi-Flo air tank Connects to AirForce Condor rifles without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank Does not fit .177-caliber guns. Use ONLY for .20-, .22- and .25-caliber Condors. The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

Low Profile Removable Front Sight and Red Laser Combo $35.94 Improve the accuracy of your airsoft gun with the Leapers UTG Low Profile Removable Front Sight and Red Laser Combo. This awesome aluminum sight/laser combo has a low profile designed for easy installation on handguards. The laser features double coil springs for optimal windage & elevation adjustments. Take aim and fire! Removable Front Sight Tower Complete with A2 Square Post Assembly and Integral Combat Quality Tactical Red Laser Pressure Switch and Batteries Included Switch Operating Type: Push-button on/off Switch Laser Control & Adjustment: TS & 4 Points Laser Beam Movement: 80cm @ 10m Laser Type: Class 3R Laser Output Power: 2.5-3.1mW Laser Wavelength: 630-640nm Laser Beam Diameter: 15-20mm@15m Laser Operating Temperature: 14oF – 113oF Laser Battery Operating Time: 80mins Laser Range: 500m Laser Life Time: 6000hrs Pressure Switch Included: Yes Diameter: 0.55" Length: 2.64"

UTG Model 4/15 Removeable Front Sight and Red Laser Combo $41.94 UTG LS750 laser & M4/15 front sight tower A2 square post assembly Class IIIA red laser 80cm@10m beam movement 2.5 to 3.1mW output 630 to 640nm wavelength 15 to 20mm beam diameter at 15m 14 deg. F to 113 deg F operating temperature 500m range Windage and elevation adjustments TS platform/smart spherical structure 80 mins. battery life 6000 hrs laser life 2.64" long 3.2 oz. with batteries Includes pressure switch & four (4) LR44 batteries

Benjamin Air Tank, 2000 psi Output $191.99 Benjamin air tank Designed for high-pressure air up to 3000 psi Regulated to 2000 psi output (specifically for the Benjamin Discovery & Marauder and the Crosman Challenger) 72 cubic inches Fills a 2000 psi rifle 6 to 8 times from one tankful To fill the Discovery, Marauder or Challenger, you’ll also need FAH002 (Dual Fuel adapter) Do not use this tank with paintball guns Includes male quick-disconnect coupling (can be filled with the Benjamin hand pump) 4.5" outside dia., 11.5" long, 4.40 lbs.

Pyramyd Air Airgun Academy DVD, Instructional Airgun Videos, Episodes 1-10 $8.34 The perfect gift for airgunners! Watch the first 10 episodes of our Airgun Academy tutorials (shown below) on your TV, computer or portable DVD player. Whether you’re new to airgunning or have been shooting them your whole life, you’re bound to learn something new by watching these videos. Includes a jewel box. Introduction to Breakbarrels Introduction to CO2 Airguns Introduction to Multi-Pump Pneumatics Introduction to Pellet Types Introduction to Single-Stroke Pneumatics Introduction to Sidelevers Introduction to Rifle Sights How to Adjust Rifle Sights Introduction to Precharged Pneumatics Introduction to High-Pressure Hand Pumps

Gamo Varmint Hunter Kit, 4×32 Rifle Scope, Laser & Flashlight $83.88 Rifle scope, flashlight & laser (specs are listed for scope only) 4x magnification 32mm objective lens 1" tube 1/4 MOA (1/4" click value @ 100 yds) Crosshair reticle 28.8′ field of view @ 100 yds 3" eye relief 11.8" long Includes pressure cables, removable caps with click buttons for laser & flashlight and 1-pc scope mount with 3/8" dovetail with rings for flashlight and laser. Other features: Hunting turrets Fully coated lenses Shockproof Fogproof Waterproof Anodized matte finish

Airforce Braided Steel Hose, Quick-Disconnect, Fits Older Airforce Refill Clamp & Hand Pump $36 Braided steel hose Quick-disconnect fitting Fits older Airforce refill clamp with gauge (U1012) & older AirForce hand pump (U1014) To fill Talon/Condor rifles, use a refill adapter with quick-disconnect nipple (U1013) to attach the hose’s quick-disconnect This braided steel hose will stand up to many years of use without compromising its integrity. Strong, flexible, reliable…and safe. Current AirForce high-pressure fill devices come with a hose. The older pumps and scuba yokes did not come with a hose. If you have one of the older units and need to replace your hose, this is the item to get.

UTG 1" Rings, Low, Weaver/Picatinny, Quick Lock $15.54 1" rings Low profile Fits Weaver/Picatinny rail 4 screws per ring cap Quick lock Includes 3mm hex wrench Special tape inside the rings keeps your scope tight without excessive clamp pressure. Quickly attach/remove these rings from your gun…no tools required! Just twist the hand-tightened knob, and the ring is ready to come off (or go on). Buy a bunch of these, keep your scopes in rings and easily move them from one gun to another.

UTG Multi-functional Compact Laser/Flashlight, Weaver Mount $71.94 UTG multi-functional compact laser & flashlight 126 lumens (max output) 6-volt flashlight 23mm xenon IRB flashlight bulb 500m max laser range (Class 3R) 80cm laser beam @ 10 meters 2.5-3.1mW laser power output 630-640nm laser wavelength 15-20mm dia. laser beam @ 15 meters Ambi finger-adjustable toggle switch (on/off) Spot-focus flashlight True Strength platform Windage/elevation adjustments on laser Integral Weaver mount Shock-resistant Water-resistant Aircraft-grade Hard-anodized finish 70 mins. max flashlight battery operating time 80 mins. max laser battery operating time 6,000 hrs. max laser lifetime 14˚F to 113˚F laser operating temperature 3.58"x1.58"x1.96" 6.3 oz. Includes 2 CR123A 3V lithium batteries, allen wrench & slotted wrench WARNING: Follow battery safety procedures when you use your light or laser. Leaving operating lights in gun cases or any areas with minimal heat dissipation will cause overheating and battery explosion. Always make sure your light is off and will not be accidentally turned on during storage or transportation. For products equipped with pressure switch, improper placement of the pressure switch on your gun may activate your light or laser when stored in gun cases or other areas. Always make sure pressure switch is fastened to your firearm in a way where it will not be accidentally pressed to activate your light, causing overheating and safety concerns. Avoid direct eye exposure.

UTG Xenon Tactical Flashlight, 95 Lumens, 3 Functions, Weaver Mount, Handheld $35.94 Xenon flashlight 3-function flashlight: on, off, momentary Push-button & remote momentary Twist-on switch Law-enforcement rated rolling stop shoulder 6V flashlight 95 max lumens Adjustable focus from flood to spot 70 mins. max battery operating time 1" diameter 5.45" long 5.7 oz. Aluminum body Incl. 2 CR123A batteries, remote pressure switch, Allen wrench & Weaver mount You’ll find lots of uses for this flashlight. It’s small enough that it won’t weigh you down when mounted on your gun or when it’s slipped in your pocket. Use it for any fix-it jobs around the house, car or shop. Lay it down for a second, and it won’t roll off the table or down the driveway because of rolling stop shoulder. At this price, get several for all the times you’ll need it when the power goes off!

UTG Combat IRB Xenon Flashlight, 260 Lumens, 3 Functions, Weaver Mount, Handheld $53.94 Tactical flashlight 3 functions: on, off, momentary 37mm bulb Push-button momentary Twist-on switch Combat/tactical head Law-enforcement rated rolling stop shoulder 9V 260 max lumens 70 mins. max battery operating time 1.07" diameter 7" long 9 oz. Aluminum body Incl. 3 CR123A batteries, remote pressure switch & Weaver mount Similar flashlights are used by law enforcement. The 260-lumen bulb shined in the eyes of an animal at night may temporarily stun them. Great if you want to jacklight nocturnal quarry, such as raccoons, rats and possums. Put the UTG Combat IRB Xenon flashlight on your gun or just hold it in your hand.

Evanix 4×32 Hellfire Rifle Scope & Laser, Circle Duplex Reticle w/Mil-Dots, 1/4 MOA, 11mm Mount $239.99 Rifle scope & Class II laser 4x magnification 32mm objective lens 1/4 MOA (1/4" click value @ 100 yds Circle duplex reticle w/mil-dots 5" long w/out sunshade, 6.6" long with sunshade Uses 3 LR44 or AG13 batteries Includes lens cover, 11mm ring, 2 hex wrenches, cleaning cloth and laser with remote pressure switch This compact scope and laser combo will come in handy when you’re hunting with your air rifle or rimfire gun and need extra help pinpointing your quarry. Note: The manual shows a mount with 3 thumbscrews, but the mount that comes with this scope has only 2 thumbscrews. It also states that the mount fits either Weaver or 11mm dovetails. It does not. It fis only 11mm dovetails.

AirForce CO2 Adapter with Filled 12-oz. CO2 tank, fits Condor, Talon & Talon SS $143.94 Includes CO2 adapter & filled 12-oz. CO2 tank Fits AirForce Condor, Talon & Talon SS guns Over 1,000 shots per CO2 tank Ideal for shooting indoors Easy to switch back to air No handpump or scuba tank required Quieter operation Ground shipping only How to switch from high-pressure air to CO2: Unscrew your AirForce air tank from your rifle Screw in your CO2 adapter into your rifle Screw in the filled tank into the other end of the adapter Start shooting! When this tank is empty or down to a low level, fill up with more CO2 from a larger bulk-fill tank. This filled tank can be sent only by ground…no air shipping allowed!

UTG 30mm Quick-Detach Max Strength Rings, Low, Weaver/Picatinny $19.14 30mm rings Low profile Fits Weaver/Picatinny rail 4 hex screws per ring secure your scope Quick-detach lever on each ring for quick attachment & removal Special tape inside the rings keeps your scope tight without excessive clamp pressure! Leapers UTG 30mm Quick-Detach rings can be quickly installed on or removed from your Weaver/Picatinny rail system. They feature 4-screw caps, low profile and are precision-machined from aircraft-grade aluminum alloy, but steel is used for all the bearing surfaces and the key. By creating an open cap top, the mounts are lighter than similar mounts with a closed cap.

UTG 30mm Quick-Detach Max Strength Rings, Medium, Weaver/Picatinny, See-Thru $21.54 30mm rings Medium profile Fits Weaver/Picatinny rail 6 hex screws per ring secure your scope Quick-detach lever on each ring for quick attachment & removal See-thru Special tape inside the rings keeps your scope tight without excessive clamp pressure! Aircraft-grade aluminum is just one of the things that makes this Leapers UTG scope mount different from all the others. The see-thru saddle plus the open architecture cap lightens the weight of the rings even more. One of the best features is the quick-detach lever lock on the side of each ring. Just pop the lever to remove your mount from a gun and simply push it back down to attach it to your gun.

Air Venturi Pellet Pen and PellSet, Loads & Seats .177 Pellets $23.94 Air Venturi Pellet Pen System with PellSet Holds up to 22 .177-cal. pellets (any .177 pellet fits) For breakbarrel air rifles and air pistols Correctly orients & loads pellets Unique PellSet seating tool adjusts for different seating depths to perfectly seat your pellets! Faster loading & seating Maximum stealth while hunting (no noisy pellet tins) Load & seat pellets even while wearing gloves No fumbling with awkward pellet containers Lanyard keeps everything conveniently located If lanyard gets caught or tangled, breakaway feature requires min. pressure to release To see all the features of the new Air Venturi Pellet Pen System with PellSet, click on the detail images and read the accompanying text.

AirForce CO2 Adapter with Filled 20-oz. CO2 Tank, Fits Condor, Talon & Talon SS $151.19 Includes CO2 adapter & filled 20-oz. CO2 tank Fits AirForce Condor, Talon & Talon SS guns Over 1,000 shots per CO2 tank Ideal for shooting indoors Easy to switch back to air No handpump or scuba tank required Quieter operation Ground shipping only How to switch from high-pressure air to CO2: Unscrew your AirForce air tank from your rifle Screw in your CO2 adapter into your rifle Screw in the filled tank into the other end of the adapter Start shooting! Since this tank is filled with CO2, it has to be shipped via ground service. Start shooting when this arrives, and refill it from a bulk-fill CO2 tank.

BSA Stealth Flashlight and Red Laser, 2 Mounts $83.99 The brilliant beam of the newly designed Stealth Tactical laser sight will allow you to find your target faster and more accurately than ever before, while the flashlight illuminates your target in low light or no light. Laser specs: 3R red laser 5 MOA 3-5mw output power 635nm wave length Uses 3V battery 18.9mm tube diameter 11.3mm dot at 10 yds 50 yds focus range Windage & elevation adjustments Visible 50 yds in daylight, 100 yds at night Flashlight specs: Uses 6v battery 5 MOA at 6.25 yds Other specs: Black matte finish Incl. 2 momentary pressure switches, combination 3/8" & Weaver mount, mount for a 1" or 30mm scope tube, 3 CR123A batteries, hex wrench set & instruction manual

BSA Varmint Hunter Precision Laser Sight & Light $47.99 Fast and very simple way to mount both a bright target illuminating light plus a fast aiming red laser to almost any scope with a 1" diameter body tube. Now you can illuminate your target under low light or zero light conditions while simultaneously directing a laser beam that will denote point of pellet strike. Easily mounts onto any 1" rifle scope with up to a 50mm diameter objective lens. Works for all small caliber rifles and all air rifles up to 1000 fps. Kit includes mounting bracket; instruction manual; hex wrench set, 3V. battery for flashlight & (3) 1.5V LR44 batteries for laser sight; remote pressure- sensitive switch and manual push button switch for both laser and flash light. Aluminum mounting bracket, laser and light bodies, black anodized finish.

CenterPoint Universal Laser/Flashlight Kit $43.19 Laser/flashlight kit Mounts onto any 1" scope tube Up to 50mm objective 50 yds visibility in daylight 200 yds visibility at night Adjustable for windage and elevation Incl. (3) LR44 button cell batteries, 3 V flashlight battery & two tactical on/off pressure switches This flashlight & laser kit by Crosman is great for medium to close range shooting. Mount this onto any 1" scope tube and enjoy increased accuracy from your favorite gun. The flashlight comes with a 3-volt battery and can illuminate your targets up to 30 yards. The laser is adjustable for windage and elevation, it is rated at 50 yards visibility during the day and 200 yards visibility at night. Pick up this kit for dependable and precise target acquisition!

UTG Xenon IRB Flashlight and Red Laser, 3 Functions, 16-Position Laser, Weaver Mount, Handheld $65.94 Xenon flashlight and laser combo 16-position adjustable/removable precision red laser (360-deg. position rotation) 3-function flashlight: on, off, momentary 23mm xenon IRB flashlight bulb Push-button momentary flashlight Twist-on switch flashlight 6V flashlight 126 max lumens flashlight 70 mins. max battery operating time 80cm @ 10m laser beam movement 3R class laser 2.5-3.1mW laser output power 630-640nm laser wavelength 15-20mm @ 15m laser beam diameter 14-deg. F to 113-deg. F laser operating temp. 80 mins. max laser battery operating time 6000 hrs laser lifetime 1.07" diameter 7" long 7.5 oz. (flashlight, laser & batteries) Aluminum body Incl. 2 CR123A batteries, 4 LR44 button batteries, remote pressure switches, slotted wrench, Allen wrench, 16-position rotating ring mount for laser & Weaver mount flashlight This is an extremely versatile setup. The flashlight and laser can be separated, so you can hold the flashlight, too. Mount just the flashlight to your gun or put the laser on it, too. No matter how you mount the flashlight, the laser’s mount rotates around the flashlight’s body so you can position it anywhere.

Laser Genetics ND3 Laser, Green, 3-Mile Visibility, Mounting Accessories $311.94 BSA Laser Genetics ND3 laser Green laser with Rotary Optical Collimator Adjustable beam diameter & intensity Micro beam (smallest diameter) is visible up to 3 miles Larger-diameter beams illuminate trails or paint targets up to 250 yds away Water-resistant Nitrogen-filled to prevent fogging 1" tube (can be mounted on a gun) Battery has 7 hrs of continuous use Made of high-tech aluminum Anodized matte black finish 532nm laser 18mW output Class 2M Uses 1 CR123V lithium battery (included) 6.25"x1.25" 5.5 oz. 1-year manufacturer’s warranty Includes 1 CR123A lithium battery, scope mount (fits 1" scope tube up to 56mm objective lens) w/windage & elevation adjustments, 3/8" & Weaver mounts, binocular/spotting scope mount (9.2mm to 6mm long; 1.25mm threads), remote momentary pressure switch, cleaning kit & padded carrying case Rated to take the 2-way recoil of airguns, including the harsh recoil of springers

UTG Tactical Pistol Flashlight, 23mm CREE Q5 LED IRB, Quick-Detach Lever Lock Weaver/Picatinny Mount $69.12 Tactical flashlight 150-lumen CREE R2 LED IRB bulb 120+ mins battery operating time Integral quick-detach, Max Strength Lever Lock Weaver/Picatinny mount Ambidextrous, finger-adjustable on/off switch Built-in bulb reflector (IRB) Tactical bezel Hard-anodized aluminum 5.7 oz (with batteries) 3.38" long 1-year limited warranty Includes one CR123A lithium battery, 2.5mm Allen wrench & manual Ideal for firearms, air guns and airsoft guns that have a Weaver/Picatinny accessory rail. Lightweight and suited for any tactical situation. While Leapers states this is a pistol flashlight, you can attach this to submachine guns, machine guns, rifles and carbines with Weaver/Picatinny scope rails. The only inconvenience is that there’s no remote pressure switch, so you’ll have to reach forward a good bit to turn this on/off. WARNING: Avoid direct eye exposure. WARNING: Do not store this flashlight in a case or confined space where minimal heat dissipation may cause overheating and battery explosion. Always make sure the flashlight is turned off and cannot be accidentally turned on during storage or transportation.

Laser Genetics ND3x40 Laser Designator, 1" Tube, 3 Mounts $431.94 Laser Genetics ND3x40 Laser Designator Functions well in temperatures 40-deg. F or warmer Green laser with Rotary Optical Collimator* 40x magnification Adjustable beam diameter & intensity Micro-beam is visible up to 3 miles Wider beam illuminates trails or "paints" targets up to 400 yds away Water-resistant Nitrogen-filled to prevent fogging (o-ring sealed) 532nm laser 40mW output Class 2M Uses 2 CR123V lithium batteries 1" tube 9.45" long 2" dia. lens 12 oz. Fully multi-coated lenses Made of high-tech aluminum Anodized matte black finish Includes two 3V CR123A batteries, Weaver ring, tripod mount,1" scope mount with adj. windage & elevation, remote momentary pressure switch, cleaning kit, hex wrench, lens cap & padded case *The patented Rotary Optical Collimator uses a system of 9 fully multi-coated lenses that allow full adjustment and control of the beam diameter and intensity to focus light where it’s needed most. Rotating the collimator ring to minimum creates a bright micro-beam green laser light visible up to 3 miles. Rotating the collimator to more open settings provides plenty of illumination to light a trail at night or �paint" a target up to 400 yds. away. Attention: Do not stare directly into the laser beam or view directly with optical instruments. Viewing the laser light or a bright reflection may cause eye injury.

Laser Genetics ND3x40 Subzero Laser Designator, 1" Tube, 3 Mounts $515.94 Laser Genetics ND3x40 Laser Designator Functions well in temperatures 40-deg. F or colder Green laser with Rotary Optical Collimator* 40x magnification Adjustable beam diameter & intensity Micro-beam is visible up to 3 miles Wider beam illuminates trails or "paints" targets up to 400 yds away Water-resistant Nitrogen-filled to prevent fogging (o-ring sealed) 532nm laser 40mW output Class 2M Uses 2 CR123V lithium batteries 1" tube 10" long 2" dia. lens 12.18 oz. Fully multi-coated lenses Made of high-tech aluminum Anodized matte black finish Includes two 3V CR123A batteries, Weaver ring, tripod mount,1" scope mount with adj. windage & elevation, remote momentary pressure switch, cleaning kit, hex wrench, lens cap & padded case *The patented Rotary Optical Collimator uses a system of 9 fully multi-coated lenses that allow full adjustment and control of the beam diameter and intensity to focus light where it’s needed most. Rotating the collimator ring to minimum creates a bright micro-beam green laser light visible up to 3 miles. Rotating the collimator to more open settings provides plenty of illumination to light a trail at night or �paint" a target up to 400 yds. away. Attention: Do not stare directly into the laser beam or view directly with optical instruments. Viewing the laser light or a bright reflection may cause eye injury.

Laser Genetics ND3 Subzero Laser Designator, 1" Tube, 3 Mounts $359.99 Laser Genetics ND3 Subzero Laser Designator Functions well in temperatures 40-deg. F or colder Green laser with Rotary Optical Collimator* Adjustable beam diameter & intensity Micro-beam is visible up to 3 miles Wider beam illuminates trails or "paints" targets up to 250 yds away Water-resistant Nitrogen-filled to prevent fogging (o-ring sealed) 532nm laser 18mW output Class 2M Uses 1 CR123V lithium battery 1" tube 6.75" long 1.25" dia. lens 5.37 oz. Fully multi-coated lenses Made of high-tech aluminum Anodized matte black finish Includes one CR123A lithium battery, Weaver ring, binocular/spotting scope mount (9.2mm to 6mm long, 1.25mm threads), scope mount, remote momentary pressure switch, cleaning kit, hex wrench, lens cap & padded case *The patented Rotary Optical Collimator uses a system of 9 fully multi-coated lenses that allow full adjustment and control of the beam diameter and intensity to focus light where it’s needed most. Rotating the collimator ring to minimum creates a bright micro-beam green laser light visible up to 3 miles. Rotating the collimator to more open settings provides plenty of illumination to light a trail at night or �paint" a target up to 250 yds. away. Do not stare directly into the laser beam or view directly with optical instruments. Viewing the laser light or a bright reflection may cause eye injury.