Sign accord York earns £ 21,000 scheme to build a bicycle path and controversial topic of Crompton Moor bomb has been awarded to a company Yorkshire.
Playpumps International

Benjamin 392 pump air rifle $191.99 .22 Caliber Pump

Axsor PCP hand pump $238.8 3-stage hand pump Pumps to 3000 psi Integral air pressure gauge Built-in moisture trap Includes a hose ending in female 1/8" BSPP threads Buy optional adapters for pumping AirForce and other brands of PCP guns

Hill Hand Pump Micron Filter Replacement $9.59 Micron filter replacement Fits all Hill hand pumps Easy to replace Instructions: Unscrew the hexagonal connector on top of the base housing (to remove pump) Remove the filter from its seat in the bottom of the housing Place the replacement filter into the housing Replace the o-ring, if needed Reattach the pump and tighten the hexagonal connector Maintain your Hill hand pump, and it’ll always be reliable. Replacing the filter is essential for proper functioning of the pump.

Hill Pump MK3, Up to 3300 PSI $347.99 Hill hand pump 3-stage pump Up to 230 bar/3,300 psi Gen 3 pump requires less effort Field-stripped in 5 mins. Dry-Pac system removes 90% of harmful moisture Includes Dry-Pac & hose ending in 1/8" bspp female threads Made in England Hill is known in the industry for making superior hand pumps. They’ve been producing commercial pumps for over 170 years and have applied their industry knowledge to the manufacture of airgun hand pumps. Hill hand pumps have a reputation for being extremely durable and outlasting other pumps by many years. Because the hand pump is easy to disassemble, it can be easily serviced by the owner. There’s no other manufacturer that sells replacement parts for their hand pumps. In fact, there’s no hand pump manufacturer that recommends disassembly of their products. Other manufacturers state that disassembly will void your warranty! Your Hill hand pump comes with a lifetime warranty. Maintain it as indicated in the owner’s manual and use Hill replacement parts as needed, and you’ll have a hand pump on which you can depend for decades.

Benjamin Discovery Rifle & Pump $479.99 Uses 2,000 PSI Air or CO2. Dual Fuel.

Everblast M87SA Pump Shotgun $33.54 Combat Shotgun

Daisy 880 Multi-Pump $55.14 An American Favorite! BB Repeater

Hill Hand Pump NLGI 2 Silicone Grease, 40g $17.94 NLGI 2 silicone grease For all Hill hand pumps 40 grams Never use petroleum-based products on your hand pump. Use only silicone grease. Hill’s silicone grease is NLGI 2, which is ideal for keeping your hand pump in good working condition. It’s geared specifically toward the temperatures your pump will reach during pumping. Make sure you do not over-lubricate your pump. Follow the maintenance directions in the owner’s manual.

Benjamin Hand Pump, Fits Crosman & Benjamin PCP Guns $214.8 3-stage hand pump Made specifically for the Crosman/Benjamin PCP pistols & rifles (fits any brand of PCP gun with a male Foster quick-disconnect on its reservoir) Includes a female Foster quick-disconnect on the end of the pump hose Goes up to 3600 psi (although some of the guns listed above operate on a max pressure of 2000 or 3,000 psi) With other hoses, pump can be adapted to other PCPs Requires less effort than other pumps Integral air pressure gauge Moisture filter

Crosman Stinger S34P, Pump Shotgun $59.94 Pistol Grip, Sawed-off Shotgun

Remington TAC 1, Black $56.34 Pump Shotgun

Hill MK3 Hand Pump Full Service Seal Kit w/Micron Filter $43.19 Full service seal kit For Hill MK3 hand pumps Includes micron filter, 7 seals and other misc. replacement parts Service seal kit for the Hill MK3 hand pump. Regular maintenance is essential for keeping your Hill hand pump in proper working condition. Includes micron filter, piston seal and all other exchangeable seals. The MK3 hand pump has 3 rings on the top and bottom of the pump body tube.

Air Venturi Intermount, Fits Benjamin Sheridan Multi-Pump Rifles $33.59 If you mounted a pistol scope on your Benjamin multi-pump but wanted to mount a rifle scope, now you can! Get this kit & mount a rifle scope in minutes! Custom-machined intermount & Picatinny rail Fits Benjamin Sheridan multi-pump rifles Easily slips on the receiver, spanning the pellet-loading area Mounts back far enough to accommodate a rifle scope 2-piece intermount mounts on receiver & included Picatinny rail attaches to the intermount Attach scope rings to the Picatinny rail Includes 2-piece aluminum intermount, 2 steel screws and Picatinny rail Scope & rings not included Fits Benjamin Sheridan multi-pumps with rounded receivers measuring .540" to .565" in diameter.

Air Venturi G4 Hand Pump, Hose with 1/8" BSPP Threads $239.99 G4 hand pump Pumps to 3,335 psi/230 bar (use only the correct pressure rated for your gun) 23" hose ends in 1/8" BSPP threads Tube lock prevents separation during transport Moisture filter Ergonomically designed handle Compartment in handle holds spare parts 1/8" BSPP threads Wide footplate with adjustable pumping angle

Hill MK3 Hand Pump Dry-Pac Refill $9.54 Dry-Pac refill For Hill hand pumps that have a Dry-Pac unit Removes 90% of harmful moisture Replace every 4 months (every 2-3 months in warmer or more humid climates) Non-toxic Dry-Pac desiccant only Keep moisture out of your gun’s air reservoir! Moisture causes rust and can compromise the integrity of your tank. This is the medium that’s inside the Dry-Pac unit.

Crosman Recruit Multi-Pump Pellet & BB Rifle $55.19 Adjustable Buttstock

Daisy No. 25 Pump-Action BB Gun $47.99 Remake of the vintage No. 25

Daisy 880S Multi-Pump & 4×15 Scope $59.94 BB Repeater, Single-Shot Pellet Gun

Crosman Stinger S32P Pump Airsoft Shotgun $35.94 Short-barrel gun with a pistol grip

AirForce PCP Hand Pump, for AirForce Rifles, Incl. Hose + Adapter, Pumps up to 3600 psi $234.9 Fits AirForce Condor, Talon & Talon SS rifles. 3-stage hand pump Does not heat up with constant use Requires less effort than other pumps Goes up to 3,600 psi Integral air pressure gauge Moisture filter Incl. 11" braided steel hose with female quick-disconnect coupling and AirForce fill adapter with male quick-disconnect coupling Every pump tested by the manufacturer

Webley Alecto Air Pistol $407.99 Multi-Pump Pneumatic

Webley Alecto Ultra Air Pistol $407.99 Multi-Pump Pneumatic

Benjamin 397 $191.99 .177 Pump Classic

Beretta PM12S Spring Airsoft SMG, Clear $39.54 Fast Action Pump System

Remington TAC 1, Black/Clear $35.99 Pump Shotgun – Clear

Remington Wingmaster Full Stock Airsoft Shotgun $35.99 Pump Shotgun, Clear / Black

TSD Sports Series SD87 Shotgun, Retractable Stock $34.74 Pump-Action Airsoft Shotgun

Benjamin HB22 $179.94 Classic .22 Pump

Crosman 1377C / PC77 $65.94 Multi-pump Air Pistol

Crosman 1377C / PC77, Black $65.94 Multi-pump Air Pistol

Beretta PM12S Spring Airsoft SMG, Black $39.54 Fast Action Pump System

Daisy Model 4841 Grizzly C and Scope $59.99 Single pump camouflage finish

Daisy Powerline 901 $75.06 Multi-Pump Air Rifle

Daisy Powerline Model 35 air rifle $41.99 Multi-pump pneumatic

Benjamin HB17 $167.94 Classic .177 Pump

Airforce Braided Steel Hose, Quick-Disconnect, Fits Older Airforce Refill Clamp & Hand Pump $36 Braided steel hose Quick-disconnect fitting Fits older Airforce refill clamp with gauge (U1012) & older AirForce hand pump (U1014) To fill Talon/Condor rifles, use a refill adapter with quick-disconnect nipple (U1013) to attach the hose’s quick-disconnect This braided steel hose will stand up to many years of use without compromising its integrity. Strong, flexible, reliable…and safe. Current AirForce high-pressure fill devices come with a hose. The older pumps and scuba yokes did not come with a hose. If you have one of the older units and need to replace your hose, this is the item to get.

Crosman M4-177 Multi-Pump Air Rifle Kit, Black $95.99 BB & Pellet Repeater, 3-10 Pumps

Crosman Recruit Combo, Multi-Pump Pellet/BB Rifle $59.99 Adjustable Stock, 4×15 Scope

Crosman M4-177 Multi-Pump Air Rifle, Adj. Stock $93.54 BB & Pellet Repeater, 3-10 Pumps

Marines Airsoft SS01 Slam/Fire Airsoft Shotgun $47.99 Tactical Pump Shotgun, Adjustable Stock

TSD 3 Round Burst SD87TLFB Tactical Shotgun $77.94 Fires 3 BBs on 1 pump!

Mossberg M500 Cruiser Shotgun $39.54 Pump-Action, Pistol Grip Version

Mossberg M500 Persuader Shotgun $41.94 Pump-Action, Full Stock Version

TSD Sports Series SD87 Shotgun, Fixed Stock $35.94 Repeater, Pump-Action Airsoft Rifle

TSD Sports Series SD87 Shotgun, Pistol Grip $29.94 Repeater, Pump-Action Airsoft Rifle

Crosman Stinger S32P Airsoft Shotgun, Clear/Black $35.94 Pump-action w/ pistol grip

Benjamin & Sheridan Repair Kit, Fits Some Pre-1995 Multi-Pump Guns w/Soldered Valve $33.54 Repair kit fits these multi-pump guns made before 1995 (they have a soldered valve): Benjamin 397, 392, 340, 342 & 347 guns as well as Sheridan C9 (Silver Streak) & CB9 (Blue Streak). To determine if this kit is for you: Remove the screw in front of triggerguard to remove rear part of the stock Remove the pins or screws that hold the retention cap at the rear of the receiver Remove the guide pin, spring & hammer to reveal the compression tube If the compression tube appears to be brass & is one piece with a pin protruding from it, you’ll need the other kit (CR/RepairKitC9) instead of this one If your gun has a rounded square hole with a valve stem sticking up through it, then the kit shown on this page will fit your gun. The included valve tool (pictured on this page) is needed to remove the parts from the soldered valve body (directions included with kit). If you need assistance or would like Pyramyd Air’s techs to do the installation, contact our technicians at 888-262-4867, ext. 244 This kit includes parts that are still available from Crosman and may require slight modification. If your gun is very old and has been treated with any petroleum distillates and/or solvents that damage rubber seals, the removal of the old parts can be challenging. The obsolete gasket that seals the valve guide to the compression tube can normally be reused. If you used petroleum products, it may be irreparably damaged and will need to be replaced by a thin o-ring. If you would like Pyramyd Air’s tech department to install this kit in your Sheridan or Benjamin rifle, please contact them at 888-262-4867, ext. 5. There will be an additional cost for the installation service, plus shipping both ways…BUT it’ll be done perfectly!

Crosman 1322 Air Pistol, Black $65.94 Bolt-Action, Multi-Pump Pellet Pistol

Crosman 2104X Air Rifle $83.99 Scoped Multi-Pump, Shoots BBs & Pellets

Crosman 2100B Air Rifle $71.94 Multi-pump rifle shoots BBs and pellets

AirForce 1/8" and 1/4" BSPP Refill Adapter set $27.9 For AirForce air rifles. Fits the FX/Logun three stage pump.

IZH 46M Seal & O-Ring Replacements $29.99 IZH 46/46M seals & o-rings Includes 2 breech seals, 2 o-rings & a pump-head seal

AirForce 1/4" male BSPP Adapter, For AirForce Guns $18.3 1/4" male BSPP adapter Connects your AirForce rifle to a scuba tank or hand pump

TSD Airsoft BB Magazine Speedloader $4.74 Fits most airsoft magazines, includes adaptor. Loads 4 BBs per pump. Roughly the same size as a pistol magazine. Holds 90 BBs

Crosman Pellgunoil $3.59 Do NOT use in precharged pneumatic (PCP) airguns! Pellgunoil is NOT safe for use in guns that use high-pressure air! Using Pellgunoil in a PCP could be explosive and may result in serious injury or death. For CO2 & multi-pump pneumatic guns Put a drop on the tip of every third 12-gram or 88-gram CO2 cartridge before inserting it Frequently apply a drop of Pellgunoil to the pump head of a multi-pump pneumatic gun Seals the gun

Air Venturi Thread Converter + Hose $29.99 Hose + adapter for AirForce Airguns scuba tank & hand pump One end has 1/4 BSPP male threads to fit the female threads of the AirForce scuba tank adapter or AirForce hand pump The other end has 1/8 BSPP female threads & fits the hose with 1/8 BSPP male threads Hose ends in 1/8 BSPP female thread for use with 1/8 BSPP filling adapters or our female quick-disconnect coupling Includes flexible hose & 2 O-rings (wide rubber O-ring is used with AirForce 3-stage hand pump; bonded metal O-ring is used with AirForce scuba tank adapter)

Air Arms PCP Adapter, 1/8" BSPP Male to DIN Female $30 PCP adapter 1/8" BSPP male to DIN female For PCP guns that need a DIN connection to 1/8" BSPP hoses for pump or scuba tank adapters 300 bar max rating

Air Venturi Williams 64 Peep Sight $41.94 Williams Peep Sight for Benjamin Sheridan multi-pump rifles manufactured in the last 5 years. Factory-drilled and tapped for easy installation. Comes with two screws for mounting.

Hammerli Pneuma Extra Air Tank, Also Fits HaleStorm & AT44PA Rifles $131.99 Don’t carry a scuba tank or pump when you go hunting or plinking! Carry an extra tank that you filled up at home! It’s lighter than fill devices and will let you keep shooting instead of filling. Fits the Hammerli Pneuma, Air Venturi HaleStorm and Hatsan AT44PA air rifles.

Air Arms Air Tank, Fits S200/T200 Air Rifles with Removable Tanks $143.94 Air tank Fits Air Arms S200/T200 air rifles with removable tanks If your Air Arms S200/T200 air rifle has a removable tank, this extra tank will be real convenient. Instead of carrying a pump or scuba tank plus the fill adapters, just fill up another tank and take it with you.

Quick-Disconnect Male Fitting + O-Ring $23.99 Male quick-disconnect fitting with o-ring Converts Sam Yang, Sumatra & Career rifles to connect to the Benjamin 3-stage hand pump Connects to female quick-disconnect (Quickadap1EM1B), which has 1/8 BSPP threads & fits most scuba tank & hand pump adapter hoses Installation instructions: To start the old fill port turning, insert the round shaft of a phillips screwdriver into the fill port hole and turn the port counterclockwise. Once the port loosens, you can take it off by hand the rest of the way. After you’ve unscrewed your old fill port from the end of your tank, thread in this quick-disconnect fitting & o-ring (included) to seal the connection. No need to depressurize the tank because the tank has a check valve.

Replacement Air Reservoir, Fits Feinwerkbau P700 Air Rifles $387.46 Feinwerkbau replacement air reservoir Built-in manometer (air pressure gauge) 2900 psi max air pressure (200 bar) Fits all Feinwerkbau P700 PCP air rifles Instead of carrying a bulky fill tank or a hand pump, take along a spare air reservoir. Fill it up before your match and avoid lugging extra baggage. Same high-quality construction as the original tank that came with your FWB P700 air rifle.

Benjamin Air Tank, 2000 psi Output $191.99 Benjamin air tank Designed for high-pressure air up to 3000 psi Regulated to 2000 psi output (specifically for the Benjamin Discovery & Marauder and the Crosman Challenger) 72 cubic inches Fills a 2000 psi rifle 6 to 8 times from one tankful To fill the Discovery, Marauder or Challenger, you’ll also need FAH002 (Dual Fuel adapter) Do not use this tank with paintball guns Includes male quick-disconnect coupling (can be filled with the Benjamin hand pump) 4.5" outside dia., 11.5" long, 4.40 lbs.

Pyramyd Air Airgun Academy DVD, Instructional Airgun Videos, Episodes 1-10 $8.34 The perfect gift for airgunners! Watch the first 10 episodes of our Airgun Academy tutorials (shown below) on your TV, computer or portable DVD player. Whether you’re new to airgunning or have been shooting them your whole life, you’re bound to learn something new by watching these videos. Includes a jewel box. Introduction to Breakbarrels Introduction to CO2 Airguns Introduction to Multi-Pump Pneumatics Introduction to Pellet Types Introduction to Single-Stroke Pneumatics Introduction to Sidelevers Introduction to Rifle Sights How to Adjust Rifle Sights Introduction to Precharged Pneumatics Introduction to High-Pressure Hand Pumps

Tiras Vest, Tan $65.94 Tiras vest Tan This tactical vest by Swiss Arms is great for extended airsoft play. The front and side compartments provide enough room to store spare magazines, pistols and other airsoft accessories with ease.

Benjamin & Sheridan Repair Kit, Fits Some Post-1995 Multi-Pumps w/Cartridge Valve $19.14 Repair kit fits these multi-pump guns made after 1995 & they have a compression tube that slides out of the assembly & does not need a special tool (has a cartridge valve & the valve is NOT soldered). It may be necessary to push out the assembly from the front of the tube: Benjamin 397 & 392 guns as well as Sheridan C9 (Silver Streak) & CB9 (Blue Streak). To determine if this kit is for you: Remove the screw in front of triggerguard to remove rear part of the stock Remove the pins or screws that hold the retention cap at the rear of the receiver Remove the guide pin, spring & hammer to reveal the compression tube If the brass compression tube comes out in one piece, then this is the kit you need If your gun has a rounded square hole with a valve stem sticking up through it, then you need the other repair kit (CR/Repairkit) If you need assistance, contact our technicians at 888-262-4867, ext. 244

Spartan Imports 9.6V 1600 mAh NiMH AEG Stick Battery $29.94 9.6V 1600mah NiMH Rechargeable Battery Stick type with Mini Plug NOTE: NO DISCHARGING REQUIRED, just charge every time you play 9"x.75" This spare NiMH AEG stick battery lets you avoid running out of battery power at the wrong time in the battlefield.

Chest Rig Vest, OD Green $47.94 Chest rig vest OD green A tactical vest protects your body and allows you to carry airsoft accessories in the battlefield during extended skirmish play. Store spare magazines, goggles, ammo and other accessories for your next airsoft mission with this comfortable lightweight vest by Swiss Arms!

Intellect 9.6 V 2300mAh Battery, NiMH, Mini-Tamiya Female Plug, Medium Crane Stock $34.79 Intellect 9.6 V 2300mAh battery NiMH Medium crane stock Mini-tamiya female plug 8 cells 1.2 V per cell 4/5A cell size Intellect batteries allow you to get optimal usage out of your AEG during extended skirmish play. Pick one up today!

Birchwood Casey Zombie Dog Darkotic Go Fetch Splattering Target, 12"x18", 8ct $11.94 Zombie dog Darkotic Go Fetch splattering target 12"x18" Each hit results in a white halo around the impact 8ct Awww…cute little doggie. Wanna play fetch? What’s that in your mouth? It’s your neighbor’s arm! Kill the zombie dog before you become his next course. Great target for a fun shooting experience.

Kill Rag, 24"x24", Red or Tan $3.59 Kill rag 24"x24" Red or tan This Echo 1 kill rag is a safe & easy way to signal yourself out of play during intense airsoft skirmishes. Drape it over your headgear and avoid getting shot as you exit the battlefield. The kill rag you receive may be either red or tan colored.

Intellect 10.8 V 2300mAh Battery, NiMH, Mini-Tamiya Female Plug, Medium Nunchuck $39.54 Intellect 10.8 V 2300mAh battery NiMH Medium nunchuck type Mini-tamiya female plug 9 cells 1.2 V per cell 4/5A cell size Don’t rely on an inferior AEG battery for extended airsoft skirmish play. This medium nunchuck battery by Intellect will keep your airsoft gun firing in the battlefield. The battery is compatible with ERA004 & EROA003 electric airsoft guns. Pick one up today! ATTENTION: Only use this battery in rifles that contain an M120 spring or higher. Damage to your gun’s gearbox can result from using this battery with a lower powered spring.

Intellect 8.4v 1400mAh NiMH AK-S Stick Battery for Tokyo Marui AK47S, M5 PDW, UZI $26.94 Mini AK Type Stick Type Battery with Large Battery Capacity Innovative 1400mAh NiMH Cell Constructed High-Drain Type means high power output for your AEG Minimum 2000rds per each full charge at Full Auto shooting mode Ready to install on ALL Airsoft AEG that accommodate AK type battery (NO MODIFICATION NEEDED) RC Magazine recommended for the best choice battery Rechargeable Battery with Mini Plug NOTE: NO DISCHARGING REQUIRED, just charge every time you play 8"x.75"

Intellect 8.4v 1600mAh NiMH AK-S Stick Battery $27.54 Mini AK Type Stick Type Battery with Large Battery Capacity Innovative 1600mAh NiMH Cell Constructed High-Drain Type means high power output for your AEG Minimum 2600rds per each full charge at Full Auto shooting mode Ready to install on ALL Airsoft AEG that accommodate AK type battery (NO MODIFICATION NEEDED) RC Magazine recommended for the best choice battery Rechargeable Battery with Mini Plug NOTE: NO DISCHARGING REQUIRED, just charge every time you play 8"x.75"

Swiss Arms 8.4V-9.6V NiMH Battery Charger with Mini male plug $20.34 8.4V-9.6V battery charger with mini male plug NiMH Delta Peak automatic stop full charge If you enjoy extended airsoft skirmish play you need a reliable battery charger. Charge your electric airsoft gun with the Tenergy 8.4V-9.6V battery charger. This charger has a Delta Peak automatic stop full charge system so you don’t have to worry about overcharging your gun’s battery. ATTENTION: Do NOT use this charger for batteries less than 600 mAh or greater than 2000 mAh. This unit charges Ni-MH batteries only.

Tenergy Universal Smart Charger With Temperature Sensor for 6V-12V NiCad & NiMH Batteries $29.94 Smart charger For use with 6V-12V NiMH & NiCd battery packs Temperature sensor Charging light indicator Large & small Tamiya adaptor Auto trickle charge function 100V-240V input 20V output 4-hour safety timer 1.0A & 2.0A current levels Selectable output switch 1.5"x2.36"x4.67" 0.6lbs Enjoy extended airsoft skirmish play? This universal smart charger by Tenergy will charge your airsoft gun so you’ll be ready to compete on the battlefield. This charger has 1.0A & 2.0A outputs that are selectable by switch. 1100 to 2000 mAh battery packs should be charged with the 1.0A setting to avoid overheating your gun’s battery. The smart charger also has a temperature sensor and automatically shuts off when your battery is full. ATTENTION: Do NOT charge the battery pack with capacities less than 1000 mAh or greater than 5000 mAh.

Air Venturi Steel Storm CO2 Bulk-Fill Adapter $59.99 Fits Umarex Steel Storm Eliminates need for disposable CO2 cartridges Go back to using disposable CO2 cartridges anytime No alterations are required! Easy to use, easy to attach Includes hose with bulk-fill CO2 tank connector, which connects to the gun’s CO2 inlet Bulk-fill CO2 tank NOT included No more small powerlets. This adapter accepts any paintball bottle (click here for 12 oz or 20 oz). Approx. 1300 shots with a 20-oz. tank & approx. 780 shots with a 12-oz. tank. With this setup, you’ll spend more time shooting and less time and money on 12-gram CO2 cartridges! Plug & play…absolutely no alterations are made to your Steel Storm!

Shooting Chrony USB to RS232 Serial Adapter with detachable USB cable $38.39 Serial Communication Parameters Detachable 10cm USB cable RxD, TxD LEDs for monitoring port status & easy diagnostics COM Port Number can be changed to COM1 to COM4 to support HyperTerminal, or any other COM port number required Industry Standard FTDI chip set & drivers for maximum compatibility Supports Windows Vista, XP, 2003, 2000, ME, 98, Linux, MAC-OS8, 9,X Full RS-232 modem control signals RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND Powered by USB port. No external power adapter required Attractive translucent plastic design Serial port speed of up to 230K bps Adds one RS-232 serial port by connecting to USB port Installed as standard Windows COM port FIFO: 128 byte transmit buffer 384 byte receive buffer Works with USB 1.1 & 2.0 host port One DB9 male connector One Mini-CD Driver Software The USB Serial Adapter is designed to make serial port expansion quick and simple. Connecting to a USB port on your computer or USB hub, the USB Serial Adapter instantly adds serial communication port to your system. By taking advantage of the USB bus, the USB Serial Adapter make it easier than ever to add serial port and serial device to your system with easy plug-and-play and hot plug feature. Adapting the new technology, the serial port expansion now takes the new bus with easy and convenient connectivity. Plugging the USB Serial Adapter to the USB port, the adapter automatically detected and installed. There are no IRQ & COM port conflicts, since the port doesn�t require any additional IRQ, DMA, memory as resources on the system. The RS-232 port function as native windows COM port, and it is compatible with Windows serial communication applications. Each port is individually configurable.