Anniversary Today marks 20 years writing this column. Following is where it started, taken from a column I wrote in April 1990. The jukebox plays, I had a girl Donna was her name, followed by child soldier, oh, my little boy soldier, followed by Wake up, little Susie, wake up.
Operation Milsim Reviews: FLASC Barrel Kit

Mad Bull Gemtech G5 Barrel Extension, Black $75.54 Barrel extension Black For airsoft use

Mad Bull Gemtech Halo Barrel Extension $75.54 Barrel extension For airsoft use

Mad Bull Gemtech Blackside Barrel Extension, Black $47.88 Barrel extension 14mm counterclockwise thread Black The barrel extension fits on the outer barrel of the gun with a 14mm counterclockwise thread. The barrel extension is just for looks and will not actually suppress the sound/noise of your airsoft gun. For airsoft use only.

Umarex Barrel for Beretta CO2 .177 Pistol $23.99 Umarex barrel for beretta CO2 pistol (.177) Part number: 41940031

Air Venturi Ported Muzzlebrake, .579" Barrel Diameter $31.19 Ported muzzlebrake .579" barrel diameter

UTG Deluxe Tri-Rail Barrel Mount $11.94 Universal Tri-Rail Barrel Mount Complete with Laser Clamping Feature – Each Rail with 2 Slots.

Leapers Deluxe Shotgun Tri-Rail Barrel Mount $27.54 Shotgun Tri-Rail Barrel Mount Complete with Flashlight Clamping Feature – Each Rail with 5 Slots

Mad Bull Whisper .45ACP Fake Barrel Extension, Black $34.74 Fake barrel extension Counterclockwise thread Black The fake barrel extension attaches the the outer barrel with a counterclockwise thread and extends your gun’s inner barrel. Pick one up for your next skirmish! For airsoft use only.

Walther CP88 barrel 4" to 6" Blued $67.19 An interchangeable barrel sysem from 4" to 6". Barrel assembly for the CP 88 blued models. Increase your speed and accuracy with this accessory.

JB Unicorn Barrel Extension, Fits AR AEG Rifles, 9.5" $57.54 Barrel extension 14mm counter clockwise thread 9.5" This 9.5" long profile barrel extension by JBU fits all airsoft rifles with 14mm counterclockwise thread. The barrel extension can be used with standard M4 length outer barrels. For airsoft use only.

Mad Bull Gemtech Outback II Fake Silencer & Barrel Extension Tube $34.74 Fake silencer & barrel extension tube 14mm counterclockwise thread For airsoft use The fake silencer & barrel extension tube attaches to the outer barrel of your airsoft gun with a 14mm counterclockwise thread. For airsoft use only. ATTENTION: The fake silencer is just for looks and will not decrease the sound of your airsoft gun.

JB Unicorn 6.01mm Barrel – Mod4 Series, 363mm, 14.29in $45.54 6.01mm x 363mm, 14.29inches tight bore inner barrel, hard anodized aluminum construction. Fits Mod4 AEGs.

Walther CP88 barrel 4" to 6" Nickel $71.99 6" nickel plated barrel assembly for the CP 88 nickel plated models. Increase your speed and accuracy with this accessory.

AirForce 12" Barrel, .25 Cal, Lothar Walther $145.2 12" choked Lothar Walther Barrel .25 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will decrease when attached to the Talon & Condor Extremely accurate!

AirForce 18" Barrel, .177 Cal, Lothar Walther $193.5 18" choked Lothar Walther Barrel .177 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon SS and decrease when attached to the Condor Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 18" Barrel, .20 Cal, Lothar Walther $193.5 18" choked Lothar Walther Barrel .20 caliber Fits AirForce Talon, Talon SS & Condor rifles Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon SS and decrease when attached to the Condor Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 18" Barrel, .22 Cal, Lothar Walther $193.5 18" choked Lothar Walther Barrel .22 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon SS and decrease when attached to the Condor Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 18" Barrel, .25 Cal, Lothar Walther $193.5 18" choked Lothar Walther Barrel .25 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon SS and decrease when attached to the Condor Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 24" Barrel, .177 Cal, Lothar Walther $229.8 24" choked Lothar Walther Barrel .177 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon or Talon SS Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 24" Barrel, .20 Cal, Lothar Walther $229.8 24" choked Lothar Walther Barrel .20 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon or Talon SS Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 24" Barrel, .22 Cal, Lothar Walther $229.8 24" choked Lothar Walther Barrel .22 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon or Talon SS Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 24" Barrel, .25 Cal, Lothar Walther $229.8 24" choked Lothar Walther Barrel .25 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon or Talon SS Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

Smith & Wesson 6" Barrel, .177 Cal., Matte Black, Fits S&W 586 CO2 Revolver $67.19 S&W 6" barrel .177 caliber Matte black shroud Fits Umarex-made Smith & Wesson 586 CO2 revolvers Increases velocity over the 4" barrel Easy to install No machining involved Includes shroud, barrel & screw Does not fit S&W firearms or airsoft guns If you’ve got an Umarex S&W 586 CO2 revolver with a 4" or 8" barrel, then this 6" one will make your collection complete. The longer the barrel on a CO2 gun, the greater the velocity.

S-Thunder BB Shower, Standard Barrel, Blue $71.99 BB shower shell For use with 40mm S-Thunder grenade launchers Compatible with all gas types Holds 80 BBs, 7 x 11mm paintballs or 4 x 17mm paintballs 20-30m effective range Standard barrel Blue 1.57" diameter 4.33" long 0.52 lbs This S-Thunder BB shower shell can be fired using any 40mm S-Thunder grenade launcher or be detonated by hand. You can fill this shell with paintballs, powder balls or BB pellets and operate it with any type of gas ranging from CO2 to green gas. This shower shell gives off a loud and satisfying 78-110dB explosion when triggered.

AirForce 12" Barrel, .177 Cal, Lothar Walther $145.2 12" choked Lothar Walther Barrel .177 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will decrease when attached to the Talon & Condor Extremely accurate! Can be used with the AirForce end cap (not included) on the Condor, which strips away turbulent air for a quieter report

AirForce 12" Barrel, .20 Cal, Lothar Walther $145.2 12" choked Lothar Walther Barrel .20 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will decrease when attached to the Talon & Condor Extremely accurate! Can be used on the Condor with the AirForce end cap (not included), which strips away turbulent air for a quieter report

AirForce 12" Barrel, .22 Cal, Lothar Walther $145.2 12" choked Lothar Walther Barrel .22 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will decrease when attached to the Talon & Condor Extremely accurate! Can be used on the Condor with the AirForce end cap (not included), which strips away turbulent air for a quieter report

Smith & Wesson 586, 4-inch Barrel $275.99 10-shot Repeater, Double-/Single-Action

Smith & Wesson 586, 6-inch Barrel $295.14 10 Shots, Double-/Single-Action

939 UHC Revolver, 2.5 Barrel $32.34 Spring powered. Replica shells hold BBs.

UTG Low-Profile Dragon Claw Clamp-on Barrel Bipod $25.8 High Tech Durable Aluminum Construction Clever Adjustment Wheel for Wide Range of Barrel Sizes – 11mm to 19mm User Friendly Clamp-On Features Unique Posi-Lock Feature to Prevent Tipping Foldable with Fully Adjustable Center Height From 9" to 11"

JBU Fake Airsoft Suppressor, 6.75", Aluminum, Incl. Barrel Extension $71.99 JBU (MSS) modular supressor system Aluminum alloy material 14mm counterclockwise thread 5-pc set Unique JBU serial number 6.75"x1.5" This high-quality modular suppressor system by JBU will enhance the look of your airsoft gun. The modular suppressor system is made of aluminum alloy material for extra durability. The 5-piece set includes a barrel cap, forward extender, base extender, flash hider & adapter. Does not suppress the sound/noise of your gun. For airsoft use only.

Gamo Shadow Sport $215.99 Bull barrel. Scope Included

Beeman Carnivore Air Rifle, RS2 Trigger $251.99 3-9×32 Scope, Fluted Barrel

Beeman Elkhorn Air Rifle, RS2 Trigger $251.99 3-9x32AO Scope, Fluted Barrel

Diana RWS 34P Pro Compact $321.3 Shorter barrel = easier handling

Diana RWS 350 Feuerkraft Pro Compact $515.4 Shorter barrel = easier handling!

Benjamin Marauder PCP Air Pistol $467.99 8-rd Repeater, Shrouded Barrel

Walther CP88, Nickel, 6 inch barrel $251.94 Black grips & compensator

Walther CP88, Nickel, 4 inch barrel $239.99 Black grips

HFC HG-132 4 Barrel Gas Revolver, Black $53.94 Adjustable Rear Sight, Semi-Auto

HFC HG-132 4 Barrel Gas Revolver, Silver $53.94 Adjustable Rear Sight, Semi-Auto

HFC HG-133 6 Barrel Gas Revolver, Black $53.94 Adjustable Rear Sight

HFC HG-133 6 Barrel Gas Revolver, Silver $53.94 Adjustable Rear Sight

Walther CP88, Blued, 6 inch barrel $227.94 Black grips & compensator

939 UHC 2.5 inch barrel revolver, Silver $32.34 Spring powered. Replica shells hold BBs.

RWS Lock Down 1-Pc Mount w/1" Rings, 11mm Dovetail, Barrel Droop Compensation $33.54 1" rings Fits 11mm dovetail 2 hex screws per ring 4 hex screws secure base to scope rail 2 recoil stop pins .025" elevation compensates for barrel droop Made of aircraft-grade aluminum Includes hex wrench Black matte

RWS Lock Down 1-Pc Mount w/30mm Rings, 11mm Dovetail, Barrel Droop Compensation $33.54 30mm rings Fits 11mm dovetail 2 hex screws per ring 4 hex screws secure base to scope rail 2 recoil stop pins .025" elevation compensates for barrel droop Made of aircraft-grade aluminum Includes hex wrench Black matte

CenterPoint Laser Boresighter, .17 to .50 Cal Guns, Min. 3.8" Barrel Needed $42.3 CenterPoint red laser boresighter Fits .17 to .50 caliber guns Also compatible with 12-, 16- and 20-gauge shotguns Works with air rifles & air pistols with minimum 3.8-inch barrel 6 adapters 6.5"x0.5"x0.5" Includes batteries Do not use on guns that have muzzlebrakes, silencers, fake silencers, shrouds or noise dampeners. CenterPoint’s red laser boresighter is battery-powered and has 6 adapter fittings for .17 to .50 caliber gun (air rifles, air pistols, firearms & airsoft guns). It also fits 12-, 16- and 20-gauge shotguns. Stop wasting time and ammo manually sighting-in your targets!

Gamo Shadow Sport with Nitro Piston $347.98 Bull Barrel, 3-9×40 Scope & Mount

Gamo Varmint Hunter Stalker Air Rifle $251.99 Dampener, Bull Barrel, Scope, Laser

Gamo Varmint Hunter with Nitro Piston $299.99 Gas Spring Rifle with Bull Barrel

Hammerli Nova $359.99 Fixed Barrel and Spring Lock Loading

Umarex Elite Force 1911A1 CO2 Airsoft Pistol $119.94 Full Metal , Blowback , Threaded Barrel

Crosman Recon Airsoft Kit, Brown/Black $71.99 Short-barrel gun with a pistol grip

Socom Gear Gemtech Oasis Gas Airsoft Pistol $96 Non-Blowback, Extended Outer Barrel

Tactical Force Combat CO2 Blowback pistol $71.94 Metal slide & barrel, Double Action

Tactical Force Combat CO2 pistol, LE Blue $71.94 Metal slide & barrel, Double Action

Falcon Airguns Prairie Falcon Profile Rifle $1151.99 Shrouded Bull Barrel, 8-rd Clip

Falcon Airguns Prairie Falcon Sporter Rifle $1031.99 Shrouded Bull Barrel, 8-rd Clip

Echo 1 MTC 1 AEG Airsoft Rifle, Black $251.99 Modular tactical carbine, short barrel

Crosman Stinger S32P Pump Airsoft Shotgun $35.94 Short-barrel gun with a pistol grip

JBU Tight Bore 6.03mm Barrel – AK Series, 455mm, 17.9in $33.54 Hard Anodized, aluminum construction. Should increase FPS by 10-20 without additional modifications.

JB Unicorn 6.01mm Barrel – AK Series, 455mm, 17.9in $45.54 Hard Anodized, aluminum construction. Compatible with AK series

JB Unicorn 6.03mm Barrel – Mod16A3 Series, 509mm, 20.0in $33.54 Hard Anodized, aluminum construction. Should increase FPS by 10-20 without additional modifications.

JB Unicorn Tight Bore 6.03mm Barrel – Mod4 Series, 363mm, 14.29in $35.94 Hard Anodized, aluminum construction. Should increase FPS by 10-20 without additional modifications.

S-Thunder Pistol Grip Long Barrel Grenade Launcher $71.94 For M203 / 40mm Gas Powered Grenades

WE P08 Metal Gas 6 inch barrel airsoft pistol $119.94 Full metal gas blowback pistol

Walther CP88, Nickel, 6 inch barrel, CO2 Pistol $347.4 Wood grips & compensator

Walther CP88, Blued, 4 inch barrel, CO2 Pistol $287.99 Wood grips

Walther CP88, Blued, 4 inch barrel, CO2 pistol $211.19 Black grips

Walther CP88, Blued, 6 inch Barrel, CO2 Pistol $323.99 Wood grips & compensator

WE P08 Metal Gas 4 inch barrel, Silver $155.94 Full metal gas blowback pistol

Walther CP88, Nickel, 4 inch barrel, CO2 Pistol $323.99 Wood grips

WE P08 Metal Gas 4 inch barrel airsoft pistol $113.94 Full metal gas blowback pistol

UHC 939 2.5 inch barrel revolver, Silver/Black $32.34 Spring-powered. Replica shells hold BBs.

Smith & Wesson Interchangeable Barrel System for the 686, 6", Nickel $80.64 With the purchase of additional barrels for your S & W 686 you can improve your accuracy and projectile speed with the longer barrels, and have the flexibility of changing to accommodate a shorter shooting distance.

Gamo Varmint Hunter $179.99 Scope & torch light w/ Bull Barrel

Gamo Varmint Stalker Air Rifle $235.19 Noise Dampener, Bull Barrel, 4×32 Scope

Gamo Varmint Stalker Deluxe Air Rifle $239.99 Noise Dampener, Bull Barrel, 4×32 Scope

Multi-Shot Combat Commando Shotgun $65.94 3 BBs Each Shot, Triple Barrel System

Multi-Shot Combat Tactical Shotgun $71.99 3 BBs Each Shot, Triple Barrel System

SIG Sauer P226 X5 Sport IPSC CO2 Full-Metal Pistol $119.99 Airsoft GBB, X-mount & Barrel Extension

ECHO 1 Long M203 Airsoft Grenade Launcher, M4/M16 Series $119.99 Echo 1 grenade launcher 3 mounting systems: R.I.S., monobloc & barrel for standard M4 Marui-type Metal barrel, barrel track, release lever, trigger, safety, triggerguard & barrel attachment rings

Hyper-Velocity Field Pellets, Type 1 for Standard Guns, .22 Cal, 11.3 Grains, Pointed, Lead-Free, 100ct $8.39 .22 caliber 11.3 grains Pointed Lead-free Type 1 for standard guns 100ct Skenco airgun pellets are lead free and contain no tin, precision two piece construction. The plastic skirt creates superior air seal and reduces friction in the barrel. These zinc and aluminum alloy pellets are totally environment friendly. They develop approximately 20% higher velocities than typical lead pellets and penetrate better than any other pellet available in the market today. Unbeatable combination of Quality and Value. Type 1 .22 (5.5 mm) Green Plastic Sabot, Steel Top Made for most .22 (5.5 mm) airguns These pellets WILL NOT FIT Crosman and Daisy magazines! Will not fit Gamo or Umarex metal magazines (Beretta, Colt, Walther Lever-Action rifle, etc.) .

Air Venturi Flash Suppressor, Fits AirForce Bounty Hunter Air Rifles, 1/2"x28tpi $23.94 Flash suppressor Fits AirForce Bounty Hunter air rifles 1/2"x28tpi (internal threads) AirForce Bounty Hunter air rifles come with our custom flash hiders. When we sell a Bounty Hunter rifle, we have to thread the barrel to fit the flash hider. If you already have a threaded barrel on your Bounty Hunter and need a different or spare flash hider, this will fit. If you’re ordering a Condor, Talon or Talon SS (or an extra AirForce barrel) at the same time and want us to thread the outside of your barrel (for a minimal fee), then click the "Add Service" button.

Swiss Arms Bipod, Includes 3 Mounts $45.54 Swiss Arms bipod Aluminum Folding, telescoping legs Includes 3 mounts: Weaver/Picatinny, barrel clamp & sling swivel stud

Beretta Laser, Fits 92FS Pellet Pistol $31.19 Laser Fits Beretta 92FS pellet pistol Clamps under the barrel Screw mount On/off LED indicators Increase the accuracy of your Beretta 92FS CO2 pellet pistol with this laser. It slides on under the barrel and holds with clamping pressure (screws tighten the mount). Not suitable for the Beretta Elite II air pistol or any handgun that has an accessory rail under the barrel.

Air Arms MPR Muzzle Weight, 2.7 oz. $17.42 MPR muzzle weight 2.7 oz. Slips onto muzzlebrake (tem#:AA-JT459) and attaches with a setscrew (screw not include) Does not fit on barrel–only on optional muzzlebrake (sold separately)

AirForce Striker Weight $11.94 If you want to convert an AirForce Airguns Talon or Talon SS air rifle to a Condor air rifle, you’ll need this striker weight, a Hi-Flo tank and a 24" barrel.

Daisy Precision Max .177 Cal, 7.5 Grains, Flat-Nosed, 250ct $2.99 .177 caliber 7.5 grains Flat-nosed (wadcutter) pellets Graphite coating reduces barrel leading Ideal for low- to medium-power guns 250 pellets in flip-top container

Gamo Gun Buddy Rifle Sling, Fits All Air Rifles $15.59 Perfect for any air rifle Lightweight and durable Quick adjustment fasteners Non-slip pebbling Deluxe, shock-absorbing shoulder strap No sling swivels required! Front slips over barrel, back slips over buttpad

Umarex Compensator, Fits Hammerli 850, Walther 1250 Dominator & Beretta CX4 Rifles $47.99 Rifle compensator Fits RWS 850 AirMagnum, Walther 1250 Dominator (do not use on .25 cal gun) and Beretta CX4 Storm Friction fit Set screw secures compensator to barrel

Crosman 459MT 2-Pc Intermount, 3/8" Dovetail $12.54 Attaches to the barrel & provides a 3/8" dovetail Fits Crosman models 2240, 2250, 2260, 2289, 1322, 1377, 1740 & 1760 Includes 1 set, which is 2 intermounts

JBU Fake Airsoft Suppressor, 4.75" Long, Aluminum, Orange Tip $41.99 Fake airsoft supressor Aluminum alloy material 14mm counterclockwise thread JBU laser marking 4.75" long Extend the outer barrel of your airsoft gun with this fake supressor by JBU. The fake airsoft supressor has 14mm counterclockwise threads and easily attaches to the outer barrel of your gun for a unique look in the battlefield!

BKL 1-Pc Adjustable Scope Mount, 1" Rings, 3/8" Dovetail, Black $79.8 1-pc scope mount 3/8" dovetail Low profile 1" rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8" side rails for mounting other accessories 2.5" of clamping length 4" overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz. 6 base screws Matte black Includes 3 hex wrenches Got barrel droop? This new mount will help you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails offer more space to add a laser and a flashlight to augment a scope.

BKL 1-Pc Adjustable Scope Mount, 30mm Rings, 3/8" Dovetail, Black $79.8 1-pc scope mount 3/8" dovetail Low profile 30mm rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8" side rails for mounting other accessories 2.5" of clamping length 4" overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz. 6 base screws Matte black Includes 3 hex wrenches Got barrel droop? This BKL Tech mount lets you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails give you room to mount a laser and flashlight.

Laserlyte Mini Laser Bore Sight, Fits .17 to .22 Cal Guns $71.99 Laserlyte laser bore sight Fits .17 to .22 caliber guns (air rifles, air pistols and firearms) Requires minimum 3" barrel (the owner’s manual incorrectly states that you need a min. 4" barrel) 6061 T6 aluminum 650nm laser module Class IIIA laser 5mw power output Includes three 393 batteries 500-yd range at night 1.5 hrs battery life (constant on) Do not use on guns that have muzzlebrakes, silencers, fake silencers, shrouds or noise dampeners. Stop wasting time and ammo manually sighting-in targets. A Laserlyte mini laser bore sight will get your shots within 3 to 4 inches of the bullseye within a couple shots at 100 yards. Air rifles, air pistols and rimfires with at least a 3-inch barrel can use the Laserlyte mini laser bore sight. The batteries come installed in the bore sight.

H&N Field Target Trophy Power Copper Plated, .22 Cal, 15.12 Grains, Round Nose, 200ct $10.2 .22 caliber 15.12 grains Round nose Copper-coated lead 200 pellets Field Target Trophy Power pellets have a copper coating that helps prevent lead build-up in your airgun’s barrel. H&N Sport pellets are known for their consistency and accuracy. Use these for hunting and plinking.

ECHO 1 Short M203 Airsoft Grenade Launcher, Mod4/Mod16 Series $117.54 Echo1 2 in 1 M203 Launcher Kit RIS Mount Included: Mounts onto all 20mm RIS (Quick Detach) Barrel Mount Included: Mounts on most Mod4 / Mod16 series AEG Barrels Full metal Frame and Tube Reinforced Trigger / pin assembly for enhanced durability

Daisy Cleaning Kit, .177" caliber $23.94 Can be used on .177 caliber BB or pellet rifles or pistols. Keeps your rifle or pistol performing well. Great for clearing pellets stuck in the barrel. Includes cleaning rods, Daisy gun oil and cleaning patches. .177" Pellet & BB guns

UTG Zytel Clamp-on Bipod $9.54 One Year Warranty Made of durable Zytel. Extremely light weight – only 6oz. Clamps around barrel and fits most guns. Folds to be carried in your pocket or bag. Very sturdy and affordable. Best valued economic solution for your practical need. Use on airsoft guns, airguns & firearms.

UTG Special Operations Universal Tactical Black Leg Holster $17.94 Fully adjustable and removable belt hanger. Deluxe non-slip holster pad, and non-slip, fully adjustable and removable leg strap For maximum comfort and provide additional retention for your handgun during extreme operations, rappelling, swimming and jumping. Extra mag pouch. Thumb break security. Universal design – For most medium to large frame pistols. Adjustable closure – For a tight pistol barrel fit. Dimensions: Length: 7 inches Width: 3.5 inches – 2 inches For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a length that is greater than or equal to the length of the holster.

UTG Special Operations Universal Tactical Black Leg Holster, Left Handed $17.94 Fully adjustable and removable belt hanger. Deluxe non-slip holster pad, and non-slip, fully adjustable and removable leg strap – for maximum comfort and provide additional retention for your handgun during extreme operations, rappelling, swimming and jumping. Extra mag pouch. Thumb break security. Universal design – for most medium to large frame pistols. Adjustable closure – for a tight pistol barrel fit. Dimensions: Length: 7" Width: 3.5" – 2" For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a length that is greater than or equal to the length of the holster.

IZH Drozd BB Gun Fake Suppressor $60.6 Includes suppressor, adapter and knurled thread protector. Want the suppressor look and feel for your Drozd BB gun without the expense, hassle and government oversight? Our .22LR fake suppressor is as close to a real suppressor as you can get without paying the tax stamp. It’s CNC-machined from a solid aluminum rod, given a durable liquid ceramic finish and professionally laser-engraved. Everything is identical to the real ATF-registered suppressors! Since its a fake suppressor, the gun’s report (loudness) is NOT reduced. Many shooters prefer the weight and balance improvement with the added suppressor. In fact, it’ll work on any airgun that has a 1/2"x28 TPI threaded barrel. To ensure exact thread alignment, the threaded adapters are CNC-machined to precision tolerances from a solid steel rod in one lathe operation. They are hot-salt blued to match the gun. The included steel thread protector covers the threads on your barrel when no accessory is mounted. Easy installation in place of the existing barrel nut. No tools or modifications are required.

Welman 11mm-to-Picatinny Drooper Rail, 22 MOA, Fits Air Arms S410/S510 Air Rifles $91.8 11mm-to-Picatinny (MIL-STD-1913) adapter Compensates for barrel droop 22 MOA @ 100 meters Fits Air Arms S410/S510 air rifles Hard-anodized aircraft-grade aluminum Secures to your air rifle’s 11mm rail with screws A hole in the mount allows access to the magazine assembly for any needed adjustments 105 grams (3.68 oz.) Any gun can have barrel droop. This 11mm-to-Picatinny (MIL-STD-1913) adapter fits Air Arms S410 and S510 air rifles and compensates for 22 MOA of droop at 100 meters. The adapter was designed for people who shoot at longer distances. Does not fit S400 or S500 air rifles because the cutout for the loading port requires a different relief.

IZH Drozd Adapter, 1/2"x28TPI, Thread Protector $30.58 The Drozd is one of the most exciting BB guns to hit the market in a long time! If you’re lucky enough to have one and want to mount an accessory that is threaded 1/2"x28TPI, such as our unrestricted fake suppressor, then this is the part you need. To ensure exact thread alignment, the threaded adapters are CNC-machined to precision tolerances from a solid steel rod in one lathe operation. They are hot salt blued to match the gun. The included steel thread protector covers the threads on your barrel when no accessory is mounted. Easy installation in place of the existing barrel nut. No tools or modifications are required. Adapter assembly includes one adapter and one knurled thread protector. This is the way the gun should have come from the manufacturer! Give your Drozd a tactical look… order a threaded adapter today!

Welman 11mm-to-Picatinny Drooper Rail, 16 MOA, Fits Air Arms S410/S510 Air Rifles $91.8 11mm-to-Picatinny (MIL-STD-1913) adapter Compensates for barrel droop 16 MOA @ 50 meters Fits Air Arms S410/S510 air rifles Hard-anodized aircraft-grade aluminum Secures to your air rifle’s 11mm rail with screws A hole in the mount allows access to the magazine assembly for any needed adjustments 105 grams (3.68 oz.) Any gun can have barrel droop. This 11mm-to-Picatinny (MIL-STD-1913) adapter fits Air Arms S410 and S510 air rifles and compensates for 16 MOA of droop at 50 meters. The mount was designed for the distances usually used by field target shooters…but it’ll work for any purpose you decided to use your air rifle. Does not fit S400 or S500 air rifles because the cutout for the loading port requires a different relief.

ICS M203 Grenade Launcher with 40mm Grenade $173.94 New ICS M203 RIS mount grenade launcher. It is designed to fit on a standard 20mm picticany rail and comes standard with a metal frame that will insure a secure hold on your airsoft gun. Includes one airsoft grenade cartridge. M203 Grenade Launcher Length: 382 mm Length of barrel: 305mm Weight: 775g Diameter: 40mm 40 mm Grenade Length: 102 mm Capacity: 72 rds of 6mm BBs

Stoeger Airguns Cleaning Rope, .177 Cal $17.94 Stoeger Airguns cleaning rope .177 cal Built-in bronze brush No assembly required Washable & reusable Cleans in one quick pass One pull-through does it Lightweight & compact Use this cleaning rope to clean the bore of your favorite airgun. Drop the brass-weighted cord through the barrel and slowly pull it through the bore. Repeat as needed until the bore is clean, although one pass may be enough to completely clean the bore. A bronze brush will not damage an air gun bore.

Stoeger Airguns Cleaning Rope, .22 Cal $17.94 Stoeger Airguns cleaning rope .22 cal Built-in bronze brush No assembly required Washable & reusable Cleans in one quick pass One pull-through does it Lightweight & compact Use this cleaning rope to clean the bore of your favorite airgun. Drop the brass-weighted cord through the barrel and slowly pull it through the bore. Repeat as needed until the bore is clean, although one pass may be enough to completely clean the bore. A bronze brush will not damage an air gun bore.

Gamo Raptor .22 Cal, 9.8 Grains, PBA, Round Nose, 50ct $11.58 PBA ammo can damage and even penetrate many metal airgun traps & targets. If you must use metal traps or targets, use our Heavy-Duty Metal Trap, the A.G.E. Quiet Pellet Trap, or traps & targets designated for rimfire guns. .22 caliber 9.8 grains Round nose 50 pellets True Gold 18 Karat gold plating eliminates barrel corrosion and enhances accuracy shot after shot.

Colt M203 Grenade launcher Model 4 Series $131.99 Colt M203 grenade launcher Each reusable gas grenade holds 18 BBs Launches 18 BBs at once Quick-launcher loading system Includes 3 mounts (R.I.S., monobloc & barrel for standard M4 Marui-type) Can be mounted on many M4 models Includes one 18-BB grenade 15" long, 3.01 lbs. Full metal

Crosman B272 4-Pc Intermount, 3/8" Dovetail $17.94 Attaches to the barrel & provides a 3/8" dovetail Includes 1 set, which is 2 bases (each base has 2 sides that are screwed together) Black matte finish Fits current production Benjamin & Sheridan airguns Mounts so far forward that you’ll have to use a pistol scope to get the right eye relief. Do not grab any part of the scope when pumping your gun!

Gamo Raptor PBA .177 Cal, 5.4 Grains, Round Nose, 100ct $10.79 PBA ammo can damage and even penetrate many metal airgun traps & targets. If you must use metal traps or targets, use our Heavy-Duty Metal Trap, the A.G.E. Quiet Pellet Trap, or traps & targets designated for rimfire guns. .177 caliber 5.4 grains Round nose 100 pellets True Gold 18 Karat gold plating eliminates barrel corrosion and enhances accuracy shot after shot.

MTM Case-Gard Predator Shooting Table $89.94 Predator shooting table For right- & left-handed shooters Wedge-shaped table with molded barrel grooves to stand long guns on their butts Doubles as a maintenance/cleaning bench 30" tall Weighs less than 15 lbs MADE IN USA This just might be the perfect shooting table. It’s lightweight, especially when compared to benchrest tables. It’s collapsible and stores flat, sturdy, durable and can be used indoors or out. Use this with your firearms, air guns and airsoft guns.

Winchester 4×32 Rifle Scope, Rings $35.99 4x rifle scope is a fantastic choice for general field use. Tough construction is fogproof and shock resistant. Includes 1 ", see-thru rings that will fit most air rifles equipped with 3/8" or 11mm dovetails. Fully-adjustable for windage and elevation; includes removable lens covers. Can be used with break barrel, pneumatic, BB or CO2 powered air rifles. 1 " diameter tube. Shockproof and fogproof are both there!

Gamo Raptor PBA .25 Cal, 14.4 Grains, Round Nose, 50ct $9.59 PBA ammo can damage and even penetrate many metal airgun traps & targets. If you must use metal traps or targets, use our Heavy-Duty Metal Trap, the A.G.E. Quiet Pellet Trap, or traps & targets designated for rimfire guns. .25 caliber 14.4 grains Round nose 50 pellets True Gold 18 Karat gold plating eliminates barrel corrosion and enhances accuracy shot after shot.

LaserLyte Laser Bore Sighter, .22 – .50 caliber $71.99 By projecting a laser from the center of the axis of the barrel of your airgun or firearm, the LaserLyte Laser Bore Sighter allows you to instantly and accurately set your sights or scope. The easy-to-use system will fit all .22 – .50 caliber rifles and pistols. Scope and sight alignment have never been easier or more accurate! No more wasted time! No more wasted ammo! Do not use on guns that have muzzlebrakes, silencers, fake silencers, shrouds or noise dampeners.

JBU Fake Airsoft Suppressor, 4.75", Aluminum $35.99 Fake supressor Aluminum alloy material 14mm counterclockwise thread JBU laser marking 4.75" long This fake suppressor by JBU fits the outer barrel on most airsoft guns with a 14mm counterclockwise thread. The fake suppressor is for looks only and will not actually decrease the sound of your airsoft gun. The fake suppressor features JBU laser markings and has a lightweight matte finish. For airsoft use only.

JBU Fake Airsoft Suppressor, 8.25", Aluminum $47.99 Fake supressor Aluminum alloy material 14mm counterclockwise thread JBU laser marking 8.25" long Enhance the look of your favorite airsoft gun with this high-quality fake suppressor by JBU! This 8.25" fake suppressor fits on the outer barrel of airsoft guns with a 14mm counterclockwise thread. The fake suppressor is made of durable aluminum alloy and has a matte finish. This fake suppressor does NOT decrease the sound of your airsoft gun. For airsoft use only.

Crosman Nitro Lubricating Oil for All Airsoft Guns, 57ml $5.63 Crosman Nitro Lubricating Oil reduces friction and prevents airsoft guns from jamming in the battlefield. This high grade silicone oil comes in a compact spray bottle container for easy application during intense skirmish situations. Maintain the reliability of your airsoft gun and order today! 57ml (1.93 fl oz) May increase or decrease muzzle velocity (varies by model) Can be used on new guns, but they may shoot slower for the first 100 Rds after use AEG & spring guns should be lubricated every 3,000 to 6,000 shots Gas guns should be lubricated every 1,000 to 3,000 shots Not recommended for use on o-ring and other plastic components We can not ship Crosman Nitro Lubricating Oil using air services. Please consider this when you choose a shipping method. Instructions: Remove magazine Spray a short burst down the barrel & through the feed tube in the magazine well Remove excess oil & wipe barrel with a swab

UTG Drooper Scope Rail, 11mm-to-Weaver Adapter, Compensates for Droop & Stops Scope Shift $22.74 UTG DNT06 scope mount base Attaches to rifle’s 11mm scope rail Fits any rifle with an 11mm scope base…either dovetail grooves or a raised rail Decreases barrel droop with 10" upward compensation at 30 yds Stops scope shift–forever! Scope base provides a secure foundation for Weaver/Picatinny mounts 4 hex screws firmly attach base to your Diana rifle Dual scope-stop holes to stop movement 0.68" saddle height 0.78" total height 1" wide 4.72" long 11 slots to accommodate various eye relief adjustments 3.8 oz. Aircraft-grade aluminum Includes 2 hex wrenches, hex screw and set screw Barrel droop is a common issue in some air guns, but it can make it difficult to use a scope. To get the most accuracy from your air rifle, mount a scope, but don’t put it directly on the airgun’s original rail. Instead, mount this great adapter, which offers 10" of upward compensation (at 30 yds.), and then mount your scope. You’ll wonder how you ever got along without it!

UTG Crime-Buster Law enforcement complete modular equipment system $51 Innovative modular design with versatile features. Battle ready construction provides durability and comfort. Premium composite material and workmanship for intense use and protection. Quick attachment of components with absolute locking and full adjustability. Great field gear for law enforcement, security, military personnel and sport enthusiasts. Holster Dimensions: Length: 6 inches Width: 4 inches – 2 inches Belt Dimensions: Length: up to 50 inches For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a lenth that is greater than or equal to the lenght of the holster.

UTG Elite Tactical Leg Holster, Army Digital (Right Handed) $11.94 New Gen with composite padding Tactical design to keep gun in ready position velcro strap adjusts to legs, keepers for height and tension, and snap for holster tension High quality quick release buckle system Extra magazine pouch attached Fits most medium to large frame autos, Glock, Beretta, Taurus, Ruger, Sig, M-1911 and others For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the triggerguard up to the barrel) and a length that is greater than or equal to the length of the holster.

UTG Elite Tactical Leg Holster, Right Hand $11.94 Super strong coated PVC outer shell with soft lining to protect guns. Tactical design to keep gun in ready position buckle straps adjust to leg, keepers for height and tension and snap for holster tension. High-quality Quick-Release Buckle System. Extra magazine pouch attached. Fits most medium to large frame autos, Glock, Beretta, Taurus, Ruger, Sig, M-1911 and others. Dimensions: Length: 9 inches Width: 4.5 inches – 2 inches For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the triggerguard up to the barrel) and a length that is greater than or equal to the length of the holster.

UTG Elite Tactical Leg Holster, Woodland Digital (Right Handed) $11.94 New Gen with composite padding Tactical design to keep gun in ready position velcro strap adjusts to legs, keepers for height and tension, and snap for holster tension High quality quick release buckle system Extra magazine pouch attached Fits most medium to large frame autos, Glock, Beretta, Taurus, Ruger, Sig, M-1911 and others For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the triggerguard up to the barrel) and a length that is greater than or equal to the length of the holster.

Winchester 3-9×32 Rifle Scope $41.99 3-9×32 rifle scope is your best choice for general field use when shooting at smaller, air gun-sized target. Tough construction is fog proof and shock resistant. Includes 1", see-thru rings that will fit most air rifles equipped with 3/8" or 11mm dovetails. Fully-adjustable for windage and elevation; includes removable lens covers. Can be used with break barrel, pneumatic, BB or CO2 powered air rifles. 1" diameter tube. 100 Yd FOV: 40′@3x – 13.1′@9x. Shockproof and fogproof are both there!

UTG Special Ops Universal Tactical Leg Holster, Army Digital Camo $17.94 Melt into the environment…go digital! Special Ops universal tactical leg holster Army digital camo Double thumb-break security system Deluxe non-slip holster pad Non-slip, fully removable, elastic leg strap for secure function Velcro close for longer guns Fully adjustable & removable belt hanger Heavy-duty buckle Extra mag pouch Fits medium- to large-frame guns 7"Lx3.5"W For the best fit, use with pistols 2" to 3.5" wide (from the bottom of the triggerguard up to the barrel) and at least 7" long.

UTG Special Ops Universal Tactical Leg Holster, Woodland Digital Camo $17.94 Melt into the environment…go digital! Special Ops universal tactical leg holster Woodland digital camo Double thumb-break security system Deluxe non-slip holster pad Non-slip, fully removable, elastic leg strap for secure function Velcro close for longer guns Fully adjustable & removable belt hanger Heavy-duty buckle Extra mag pouch Fits medium- to large-frame guns 7"Lx3.5"W For the best fit, use with pistols 2" to 3.5" wide (from the bottom of the triggerguard up to the barrel) and at least 7" long.

UTG Scope Mount Base, Fits RWS Diana Rifles, Gamo Whisper & Others $21 Fits guns with the T05 trigger. In 2011, Diana introduced the T06 trigger and it also has a longer rail. This adapter does NOT fit the guns with a longer rail. Fits RWS Diana breakbarrel rifles that have no barrel droop Also fits Gamo rifles with a raised scope rail Attaches to rifle’s 11mm scope rail Special "recoil shock shoulder" stops scope shift–forever! Hide’s rifle’s 11mm scope rail; looks professional Scope base provides secure scope mounting with Weaver/Picatinny mounts 3 hex screws attach base to your Diana rifle Includes 2 hex wrenches Does not fit RWS Diana 46 or Schutze rifles

WE Hi Capa 5.1 Series CO2 28 Round Magazine $51.54 TSD Tactical Hi Capa 5.1 Series CO2 31 Round Magazine. Brand new design, same size and demension as a WE 5.1 Hi Capa green gas magazine. Fits a 12gram CO2 cartridge, magazine fits all Baby Hi-Capa, 4.3 Hi-Capa, and all 5.1 Hi-Capa including Dragon models. No modifications required for use in all WE green gas blow pistols. New Design Same Size as Green Gas Magazine 28rd Capacity Fits 1-12gram CO2 Cartridge 12gr CO2 cartridge provides from 45 to 55 shots. CO2 bleeds out from the barrel when a small amount of CO2 left in the cartridge.

UTG Deluxe Universal Horizontal Shoulder Holster $14.39 High quality and very cleverly designed shoulder holster with loaded features. Universal design to fit most popular auto pistols and revolvers. Modular design allows for both left and right handed use. Each ring includes a padded shoulder harness, and a holster with soft lining to protect guns and two mag pouches. All components are fully adjustable with Velcro straps attached to web belt for holster/pouch tension. Tactical design to keep gun in ready position and still out of the way. Holster Dimensions: Length: 8 inches Width: 4 inches – 2.5 inches For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a length that is greater than or equal to the length of the holster.

UTG Deluxe Universal Horizontal Shoulder Holster, Army Digital Camo $14.39 Melt into the environment…GO DIGITAL! UTG Digital Patterned Tactical Armor – Blend in stealthily and yet stand tall, presenting the most professional image! High quality and very cleverly designed shoulder holster with loaded features. Universal design to fit most popular auto pistols and revolvers. Modular design allows for both left and right handed use. Each ring includes a padded shoulder harness, and a holster with soft lining to protect guns and two mag pouches. All components are fully adjustable with Velcro straps attached to web belt for holster/pouch tension. Tactical design to keep gun in ready position and still out of the way. Holster Dimensions: Length: 8 inches Width: 4 inches – 2.5 inches For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a length that is greater than or equal to the length of the holster.

UTG Deluxe Universal Horizontal Shoulder Holster, Woodland Digital Camo $14.39 Melt into the environment…GO DIGITAL! UTG Digital Patterned Tactical Armor – Blend in stealthily and yet stand tall, presenting the most professional image! High quality and very cleverly designed shoulder holster with loaded features. Universal design to fit most popular auto pistols and revolvers. Modular design allows for both left and right handed use. Each ring includes a padded shoulder harness, and a holster with soft lining to protect guns and two mag pouches. All components are fully adjustable with Velcro straps attached to web belt for holster/pouch tension. Tactical design to keep gun in ready position and still out of the way. Holster Dimensions: Length: 8 inches Width: 4 inches – 2.5 inches For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a length that is greater than or equal to the length of the holster.

UTG Elite Tactical Leg Holster, Left Handed $11.94 Super strong coated PVC outer shell with soft lining to protect guns. Tactical design to keep gun in ready position Velcro strap adjusts to legs, keepers for height and tension and snap for holster tension. High quality Quick Release Buckle System. Extra magazine pouch attached. Fits most medium to large frame autos, Glock, Beretta, Taurus, Ruger, Sig, M-1911 and others. Dimensions: Length: 9 inches Width: 4.5 inches – 2 inches For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a length that is greater than or equal to the length of the holster.

MTM Case-Gard Predator Shooting Rest, for Rifles & Pistols $52.74 Predator shooting rest Use with rifles and pistols Lightweight & easily adjusts Rock-solid stable (4 legs) Buttstock support for long guns quickly removes so you can use the front rest with handguns Precision height adjuster so you can zero-in for pinpoint accuracy Front rubber shooting pad will not mar your gun & steadies any gun, regardless of the barrel or stock shape Rest extends from 20" to 26.25" Front pad height adjusts from 8.5" to 11.5" Folds down to 22"x20" for easy storage 3.5 lbs MADE in USA The Predator shooting rest is lightweight, yet stable. It accommodates airguns, airsoft guns and firearms. If you shoot both rifles and pistols, this is the ideal rest. Converting your Predator shooting rest from a long gun to a handgun configuration will take you just a few seconds. Plus, the entire until collapses down to a compact package for easy storage.

UTG Scope Mount Base, Fits RWS Diana 48, 52, 54 & 460 Magnum with TO5 Trigger, Compensates for Droop & Stops Scope Shift $22.74 We strongly recommend that you use a 2-piece Weaver scope mount that has 4 screws on each ring cap.

UTG Scope Mount Base, Fits RWS Diana 34, 36, 38, & 45 with TO5 Trigger, Compensates for Droop & Stops Scope Shift $22.74 We strongly recommend that you use a 2-piece Weaver scope mount that has 4 screws on each ring cap.

Gamo .177 Caliber Cleaning Kit $15.54 Three piece rod disassembles for easy storage. All components are expressly designed to eliminate the possibility of damage to the relatively shallow rifling of airguns. Always make sure your airgun is unloaded before cleaning or oiling. Great basic and compact maintenance kit for use on .177 caliber pellet rifles or pistols

TSD Airsoft Face Mask, Black $15.54 Black 2 piece detachable tactical airsoft face mask. Perforated aluminum eye shield, low profile silicon plastic. Eye shield can be used separately. Made just for Airsoft gaming Protects face and eyes Light weight construction for comfort and mobility Made in Taiwan

TSD Airsoft Face Mask, Green $15.54 Green 2 piece detachable tactical airsoft face mask. Perforated aluminum eye shield, low profile silicon plastic. Eye shield can be used separately. Made just for Airsoft gaming Protects face and eyes Light weight construction for comfort and mobility Made in Taiwan

UTG 314 Sniper Handguard Rail Mount & Top Rail Mount $11.98 - 2 piece weaver rail mount set for UHC Super 9 Rifle (UA-314)- 1x 140mm Scope Rail mouted on top of receiver- 1x 110mm Handguard mount- Complete with swivel stud, screws and mounting tools- Will only fit on super 9 we sell.

Leapers Xenon Flashlight, 95 Lumens, Integral Weaver Mount, Pressure Switch & Battery $29.99 Deluxe flashlight with integral Weaver mount Up to 95 lumens Durable and compact – a mere 4 5/8 inches and 6.5 oz Precision machined 1 piece aircraft-grade aluminum tube Anodized black matte finish Integral Picatinny/Weaver style mounting deck Tool free attachment with knurled nut and locking plate Adjustable focusable beam Complete with remote pressure switch Two 3-volt Lithium batteries are included.

AirForce Shoulder Stock, Fits TalonP Air Pistol $79.8 Shoulder stock Fits AirForce TalonP air pistol Adds 1/4" to 3/3" to length of pull Includes a hex wrench A great accessory for your AirForce Airguns TalonP air pistol. Just add this shoulder stock to convert it to a great little carbine. While this is a solid piece of metal, it doesn’t add much weight to the gun. Easy to attach and remove, this add-on slides over the air tank. Tighten the screws, and you’re ready to go!

Air Arms S510 Monte Carlo Stock, Poplar, Two-Tone High-Gloss, Ambidextrous $263.99 Air Arms S510 Monte Carlo stock Poplar with two-tone, high-gloss finish Ambidextrous (two raised cheekpieces) Uniquely checkered forearm & pistol grip Air Arms sets the trend, again! This magnificent high-gloss stock for the Air Arms S510 air rifle is a masterpiece. Hold it in your hands, and you’ll want this on every gun you own. Slip your S510 out of it’s current stock and slide it into this gorgeous piece of wood.

BKL Scope Bubble Level $22.8 Scope bubble level Mounts on any BKL one- or two-piece scope mount (in the spreader holes) A canted gun cannot be accurate. Put this bubble level on your BKL scope mount to keep your gun level to increase accuracy.BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

G&G Armament 30mm AP Red Dot Sight, 1-Pc Weaver/Picatinny Mount $71.99 AP red dot sight 1-pc Weaver/Picatinny mount 30mm Incl. flip-open lens caps, 2 batteries & cleaning cloth Improve the accuracy of your firearm, airgun or airsoft gun with this G&G Armament AP red dot sight. The red dot sight comes with a one piece mount that attaches to your gun’s tactical rail and includes flip-open lens caps, cleaning cloth & 2 batteries.

Remington NRR 22 Earmuffs & Safety Glasses Combo, Pink $33.54 Remington earmuffs & safety glasses combo Fold-down pink earmuffs with NRR 22 noise reduction rating Slim ear cup with gun stock relief cuts Multi-position headband w/Remington logo Safety glasses have clear lenses and black and pink frame Dual-molded rubber temples and soft-touch bridge Adjustable rubber nose piece 99% UVA and UVB protection Meets or exceeds ANSI Z-87+ standards Just because you need ear and eye protection, doesn’t mean they can’t be pink! This delicious combo is perfect for women who like stylish protection while shooting.

B-Square Professional Gunsmith Screwdriver Set $34.74 The 32 piece set includes: 1 magnetized driver handle with no-slip grip, 11 gunsmith ground medium and fine blade slotted bits, 3 Phillips bits, 8 hex bits, 2 torx bits, 2 posi-drive bits, 1 long 3/32" hex bit, 1 long 5/32" fine slotted bit, 1 long #1 Phillips bit, 1-1/4" socket drive adapter and comes in a sturdy molded storage case with individual compartments for each item. Special gunsmith-ground bits are perfect for quick repairs in the field or on the bench for rifles, pistols, scopes, rings, bases as well as for hunting, camping and hundreds of household uses.

Radians Revelation Safety Glasses, Camo Frame, Smoke Lenses, Adjustable $17.99 Radians Revelation safety glasses Smoke impact-resistant & scratch-resistant polycarbonate lenses Dual 8-base lens design 5-position lens angle adjustment Camo frame Slim temples 4-position temple-length adjustment Wraparound coverage Side-shield protection Soft nose piece w/self-adjusting fingers Built-in ventilation channel reduces fogging Blocks 99.9% of UV rays Meets all ANSI Z87.1-2003 & CSA Z94.3 standards Polycarbonate safety glasses protect your eyes from impact, but the glasses deteriorate due to scratches, light, etc., and should be replaced after 2 years.

CenterPoint AR22 Series 4x32mm duplex reticle rifle scope, 3/8" rings $35.99 Rifle scope Power: 4x Obj. Lens Dia (mm): 32 AO: N Illum. Reticle: N Reticle: Duplex Field of View (ft. at 100 yds): 28.0 Eye Relief (in.): 3.0 Exit Pupil (mm): 6.0 Parallax Setting (yds): 30 yds W/E Adjust Click Value: 1/4 M.O.A Tube Size: 1" Length (in.): 10.5 Weight (oz.): 12.9 Rings Included: 3/8" dovetail rings Lens Covers: Elastic Sun Shade: N Duplex reticle Tool-free, finger adjustable windage and elevation dials Includes lens covers and medium profile premium rings One piece tube construction CenterPoint’s Advantage lens coating reduces light loss and limits glare, while allowing optimum light transmission Ergonomically designed grips for fast focus eyepiece and magnification Duplex reticle 100% waterproof, fogproof and shockproof

Benjamin & Sheridan Repair Kit, Fits Some Post-1995 Multi-Pumps w/Cartridge Valve $19.14 Repair kit fits these multi-pump guns made after 1995 & they have a compression tube that slides out of the assembly & does not need a special tool (has a cartridge valve & the valve is NOT soldered). It may be necessary to push out the assembly from the front of the tube: Benjamin 397 & 392 guns as well as Sheridan C9 (Silver Streak) & CB9 (Blue Streak). To determine if this kit is for you: Remove the screw in front of triggerguard to remove rear part of the stock Remove the pins or screws that hold the retention cap at the rear of the receiver Remove the guide pin, spring & hammer to reveal the compression tube If the brass compression tube comes out in one piece, then this is the kit you need If your gun has a rounded square hole with a valve stem sticking up through it, then you need the other repair kit (CR/Repairkit) If you need assistance, contact our technicians at 888-262-4867, ext. 244

Benjamin & Sheridan Repair Kit, Fits Some Pre-1995 Multi-Pump Guns w/Soldered Valve $33.54 Repair kit fits these multi-pump guns made before 1995 (they have a soldered valve): Benjamin 397, 392, 340, 342 & 347 guns as well as Sheridan C9 (Silver Streak) & CB9 (Blue Streak). To determine if this kit is for you: Remove the screw in front of triggerguard to remove rear part of the stock Remove the pins or screws that hold the retention cap at the rear of the receiver Remove the guide pin, spring & hammer to reveal the compression tube If the compression tube appears to be brass & is one piece with a pin protruding from it, you’ll need the other kit (CR/RepairKitC9) instead of this one If your gun has a rounded square hole with a valve stem sticking up through it, then the kit shown on this page will fit your gun. The included valve tool (pictured on this page) is needed to remove the parts from the soldered valve body (directions included with kit). If you need assistance or would like Pyramyd Air’s techs to do the installation, contact our technicians at 888-262-4867, ext. 244 This kit includes parts that are still available from Crosman and may require slight modification. If your gun is very old and has been treated with any petroleum distillates and/or solvents that damage rubber seals, the removal of the old parts can be challenging. The obsolete gasket that seals the valve guide to the compression tube can normally be reused. If you used petroleum products, it may be irreparably damaged and will need to be replaced by a thin o-ring. If you would like Pyramyd Air’s tech department to install this kit in your Sheridan or Benjamin rifle, please contact them at 888-262-4867, ext. 5. There will be an additional cost for the installation service, plus shipping both ways…BUT it’ll be done perfectly!

Leapers 5th Gen 3-9×50 AO Mil-Dot Rifle Scope with R/G Reticle, 1" Tube $83.99 True Strength Major Features : Flip-open Lens Cover Rugged One Piece Tube Construction for All Terrains/Weather Precision machined to exact tolerances from aircraft-grade aluminum alloy. Completely sealed and nitrogen filled to stop moisture ingress. Perfect for all terrains and all weather conditions. Sealed Windage and Elevation Housing with Tru-Hunter Turrets Windage and elevation housing features machine plate controlled seals, to eliminate risk of water ingress and fogging. Tru-Hunter Turrets are manufactured in brass with easy to grip rings making adjustments simple even while wearing gloves. Positive and precise 1/4 MOA for accurate and consistent shooting. Wide Field of View with Tactical Mil-Dot Reticle Wide field of view and edge to edge lens clarity allow for clearly picking up quarry on the peripheral edge of the sight picture. The Precise Tactical Mil-Dot reticle allows the shooter to estimate ranges and enhance accuracy. Power Illuminated Reticle with Red/Green Dual Illumination Adjustable intensity of the illuminated reticle gives optimum reticle clarity in variable light conditions, increasing accuracy in daylight and twilight environments. Black reticle is displayed when illumination is turned off. Specifications Rifle scope Magnification: 3X-9X Tube Dia.: 1" Objective Dia.: 50 mm Field of View @100 yards: 39.3′-13.1′ Eye Relief: 3.3"-3.1" Exit Pupil: 10.0mm-5.6mm Click Value@100 yards: 1/4" Length: 13.5" Weight: 22.4oz Parallax Setting: 5 yds – infinity Includes: CR2032 3V lithium battery, sunshade & flip-open lens covers