Parts Freak

I want to buy a barrel freak part smart and I have an EOS, which insert I do?

It used a pulse / Ion Barrel threads.

Smart Parts Freak Jr Barrel Kit

Anschutz 8001 AiR-15 Air Rifle $2999.99 M16A2 Stock, Bushmaster Parts

UTG Airsoft Silicone Spray, 50ml $5.7 Maintain the reliability of your airsoft gun with UTG Airsoft Silicone Spray . This compact 50ml spray bottle is convenient to carry in the battlefield, and will protect your gun against corrosion and jamming during intense airsoft skirmish operations. Silicone oil spray can be used in machinery parts, gear, o-ring, tools, and plastic parts. Take aim and fire! We can not ship UTG Airsoft Silicone Spray using air services. Please consider this when you choose a shipping method.

SRC Silicone Spray Oil, 70g $5.7 Silicone oil Compact spray bottle Convenient to carry in the battlefield Lubricate machine parts, gears, o-rings, tools and plastic parts For use with all types of airsoft guns 70g Silicone oil protects the components of your airsoft gun from corrosion and prevents jamming. Maintain the reliability of your gun during crucial airsoft skirmish missions. Ground shipping only .

Blue #242 Thread-Locker $19.5 Medium strength, 1700 psi. Blue color is best for scope mounting and most gunsmithing applications. Fills fine threads without binding. Locks threaded fasteners against vibration loosening. Prevents leaks and rusting of threads. Bond can be broken loose without heat. Parts disassemble with hand tools. Ideal for fasteners 1/4" to 3/4". Degrease parts thoroughly before using. 6ml tube.

Birchwood Casey Barricade, Spout Can, 4.5 oz. $6.71 Birchwood Casey Barricade (formerly named Sheath) Rust prevention Drives out moisture from metal pores Transparent coating seals the surface Lubricant and penetrant for loosening frozen/rusty parts 4.5 oz. in a spout can Flammable. Cannot be shipped via air.

Hill MK3 Hand Pump Full Service Seal Kit w/Micron Filter $43.19 Full service seal kit For Hill MK3 hand pumps Includes micron filter, 7 seals and other misc. replacement parts Service seal kit for the Hill MK3 hand pump. Regular maintenance is essential for keeping your Hill hand pump in proper working condition. Includes micron filter, piston seal and all other exchangeable seals. The MK3 hand pump has 3 rings on the top and bottom of the pump body tube.

Airsoft Innovations Compact Gas Can Filling Device $51.54 Compact gas can filling device Removable top cap Reusable high strength pressure vessel NC machined metal parts w/ relief valve 5.25�x1.75� 5.64 oz Incl. GBB oil Carrying gas-powered airsoft guns in the battlefield? Pick up this Airsoft Innovations filling device to allow your gun to fire continuously during intense airsoft wars. This filling device is compact and fits comfortably in most flashbang pouches.

Air Venturi G4 Hand Pump, Hose with 1/8" BSPP Threads $239.99 G4 hand pump Pumps to 3,335 psi/230 bar (use only the correct pressure rated for your gun) 23" hose ends in 1/8" BSPP threads Tube lock prevents separation during transport Moisture filter Ergonomically designed handle Compartment in handle holds spare parts 1/8" BSPP threads Wide footplate with adjustable pumping angle

Gamo Cleaning Mat, 12"x 53" $11.94 Gamo cleaning mat Place under your gun and any cleaning supplies to protect furniture Pebble-grain texture prevents slipping and sliding 12"x53" Plan ahead when you clean or maintain your airguns! Lay down this mat first and then pull out your air gun, parts, oils, solvents, cleaning tools and anything else that you need. Just because it’s real long, doesn’t mean you can’t use it for air pistols, too!

Birchwood Casey Zombie Rat Darkotic Drain Pipe Splattering Target, 12"x18", 8ct $11.94 Zombie rat Darkotic Drain Pipe splattering target 12"x18" Each hit results in a white halo around the impact 8ct This is one huge, disgusting rat! Just what you need to hone your shooting skills…whether you believe in zombies or not! Put this critter out of its misery before it starts making a meal out of your body parts!

Hill Pump MK3, Up to 3300 PSI $347.99 Hill hand pump 3-stage pump Up to 230 bar/3,300 psi Gen 3 pump requires less effort Field-stripped in 5 mins. Dry-Pac system removes 90% of harmful moisture Includes Dry-Pac & hose ending in 1/8" bspp female threads Made in England Hill is known in the industry for making superior hand pumps. They’ve been producing commercial pumps for over 170 years and have applied their industry knowledge to the manufacture of airgun hand pumps. Hill hand pumps have a reputation for being extremely durable and outlasting other pumps by many years. Because the hand pump is easy to disassemble, it can be easily serviced by the owner. There’s no other manufacturer that sells replacement parts for their hand pumps. In fact, there’s no hand pump manufacturer that recommends disassembly of their products. Other manufacturers state that disassembly will void your warranty! Your Hill hand pump comes with a lifetime warranty. Maintain it as indicated in the owner’s manual and use Hill replacement parts as needed, and you’ll have a hand pump on which you can depend for decades.

Shooter’s Choice FP-10 Lubricant Elite, 4 fl oz $11.1 FP-10 Lubricant Elite Reduces friction & wear Increases lubricity between metal surfaces & moving parts Protects against metal damage Temperature operating range of -76 deg. F to +500 deg. F Petroleum-based No build-up or changes in tolerances Will not harm leather or synthetic seals Used by many PCP shooters to lightly lube their pellets Removes fingerprints from wood & metal when wiped on the exterior of your gun Helps prevent rust Also useful for firearms, fishing tackle, marine equipment, sports equipment & many household items 4 fl oz

Benjamin & Sheridan Repair Kit, Fits Some Pre-1995 Multi-Pump Guns w/Soldered Valve $33.54 Repair kit fits these multi-pump guns made before 1995 (they have a soldered valve): Benjamin 397, 392, 340, 342 & 347 guns as well as Sheridan C9 (Silver Streak) & CB9 (Blue Streak). To determine if this kit is for you: Remove the screw in front of triggerguard to remove rear part of the stock Remove the pins or screws that hold the retention cap at the rear of the receiver Remove the guide pin, spring & hammer to reveal the compression tube If the compression tube appears to be brass & is one piece with a pin protruding from it, you’ll need the other kit (CR/RepairKitC9) instead of this one If your gun has a rounded square hole with a valve stem sticking up through it, then the kit shown on this page will fit your gun. The included valve tool (pictured on this page) is needed to remove the parts from the soldered valve body (directions included with kit). If you need assistance or would like Pyramyd Air’s techs to do the installation, contact our technicians at 888-262-4867, ext. 244 This kit includes parts that are still available from Crosman and may require slight modification. If your gun is very old and has been treated with any petroleum distillates and/or solvents that damage rubber seals, the removal of the old parts can be challenging. The obsolete gasket that seals the valve guide to the compression tube can normally be reused. If you used petroleum products, it may be irreparably damaged and will need to be replaced by a thin o-ring. If you would like Pyramyd Air’s tech department to install this kit in your Sheridan or Benjamin rifle, please contact them at 888-262-4867, ext. 5. There will be an additional cost for the installation service, plus shipping both ways…BUT it’ll be done perfectly!

Gamo Treated Gun Cleaning Cloth, 10"x10" $5.94 Gamo treated gun cleaning cloth Cleans & lubricates metal surfaces Safe for airguns, airsoft guns and firearms Removes fingerprints, which have acid that can eat through the metal’s bluing…leading to rust and pitting 10"x10" If you don’t wipe down the metal parts of your gun after each handling or shooting session, you may notice some rust on the metal. The fingerprints you leave on the metal surface of a gun has enough acid that it will eventually eat through the bluing of your gun. Once the protective bluing is gone, rust takes a foothold. Using a treated cloth to wipe down your gun before putting it away will preserve the finish and your investment.

Crosman Nitro Piston Conversion, Fits Many Newer Gamo Rifles $131.99 Pyramyd Air MUST install the Nitro Piston in your gun. It cannot be sold for customer installation. You will be charged shipping during the checkout process. That’s the charge to send your gun back to you after installation. Send your airgun to: Crosman Nitro Piston Installation 18370 S. Miles Road Warrensville Heights, OH 44128 The perfect upgrade for your Gamo Whisper air rifle. Crosman Nitro Piston conversion Fits Gamo Whisper-series, Hunter Sport, Varmint Hunter, Big Cat & Shadow Sport made in 2010 or later! Maintains same velocity as the metal spring Smoother cocking Smoother shooting No spring torque No spring fatigue, even if you leave it cocked for hours Functions perfectly in cold weather Lasts longer than a metal spring Installation is included in the price! All internal parts removed for this conversion will be sent back with your gun

Crosman Nitro Piston Conversion, Fits Walther Falcon Hunter, Talon Magnum & some Hatsan models $131.99 Pyramyd Air MUST install the Nitro Piston in your gun. It cannot be sold for customer installation. You will be charged shipping during the checkout process. That’s the charge to send your gun back to you after installation. Send your airgun to: Crosman Nitro Piston Installation 18370 S. Miles Road Warrensville Heights, OH 44128 The perfect upgrade for your Walther Falcon Hunter, Talon Magnum and some Hatsan air rifles. Crosman Nitro Piston conversion Fits Walther Falcon, Talon Magnum and some Hatsan air rifles Fits any caliber! Maintains same velocity as the metal spring Smoother cocking Smoother shooting No spring torque No spring fatigue, even if you leave it cocked for hours Functions perfectly in cold weather Lasts longer than a metal spring Installation is included in the price! All internal parts removed for this conversion will be sent back with your gun

Crosman Nitro Piston Conversion, Fits Many Older Gamo Rifles $131.99 Pyramyd Air MUST install the Crosman Nitro Piston in your gun. It cannot be sold for customer installation. You will be charged shipping during the checkout process. That’s the charge to send your gun back to you after installation. Send your airgun to: Crosman Nitro Piston Installation 18370 S. Miles Road Warrensville Heights, OH 44128 The perfect upgrade for your Gamo air rifle. Crosman Nitro Piston conversion Fits Gamo Whisper-series, Hunter Sport, Varmint Hunter, Big Cat & Shadow Sport made in 2009 or earlier and the Tech Force 89 and 99 air rifles Maintains same velocity as the metal spring Smoother cocking Smoother shooting No spring torque No spring fatigue, even if you leave it cocked for hours Functions perfectly in cold weather Lasts longer than a metal spring Installation is included in the price! All internal parts removed for this conversion will be sent back with your gun Remove the buzz, twang and vibration from your spring rifle. Gas springs are known for their reliability and durability.

Be Sociable, Share!

•