09 ul Proto Slg Paintball Gun?

i got the proto and want to get an on / off and loop idk if I should get a dovetail mounting or direct as I have, was taken to see it and on the bottom is flat and only two allen screws .. key companies, but come with 2 size rectangle .. How WELL NEVERMIND I can get a dovetail mounting or direct?

You can use either. Dovetail is what comes out of stocks and allows you some room to move, but have to press more or less every other output. Direct mounting location will be fixed, but less likely to linger.

ODP: What’s it all called?

Crosman Airsource CO2 Paintball Adapter $8.39 Paintball adapter Fits 88-gram AirSource CO2 tanks More convenient than a refillable tank This paintball adapter is compatible with Crosman 88-gram AirSource CO2 tanks. Simply attach the adapter to the paintball marker before you attach it to the cylinder. For paintball use only.

Mendoza Diopter Sight, 11mm Dovetail $35.99 Rear sight Peep aperture Micrometer adjustments for windage and elevation Fits any gun with an 11mm dovetail Securely attaches with dual clamping screws Lightweight aluminum Durable, anodized finish

Mendoza Micrometer Sight, 11mm Dovetail $23.99 Open rear sight Micrometer windage and elevation adjustments Fits any gun with an 11mm dovetail Securely attaches with dual clamping screws Lightweight aluminum Durable, anodized finish

Beeman 5031 30mm Rings, High, 9.5-11.5mm Dovetail $69.54 30mm rings High profile Fits 9.5-11.5mm dovetail 4 hex screws/ring to secure scope Vertical scope stop pin (removable) The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

BKL 1" Rings, 3/8" or 11mm Dovetail, Matte Black $23.4 1" rings Fits 3/8" or 11mm dovetail Matte black

BKL 1" Rings, 3/8" or 11mm Dovetail, Silver $23.4 1" rings Fits 3/8" or 11mm dovetail Matte black

BKL 30mm Rings, 3/8" or 11mm Dovetail, Matte Black $34.2 30mm rings Fits 3/8" or 11mm dovetail Matte black

BKL 30mm Rings, 3/8" or 11mm Dovetail, Silver $34.2 30mm rings Fits 3/8" or 11mm dovetail Silver

Crosman 459MT 2-Pc Intermount, 3/8" Dovetail $12.54 Attaches to the barrel & provides a 3/8" dovetail Fits Crosman models 2240, 2250, 2260, 2289, 1322, 1377, 1740 & 1760 Includes 1 set, which is 2 intermounts

BKL 30mm Rings, 3/8" or 11mm Dovetail, Offset, Silver $54 30mm rings Fits 3/8" or 11mm dovetail Offset for additional eye relief Silver BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

Leapers 30mm Rings, High, 3/8" Dovetail $11.99 Limited Lifetime Warranty 30mm rings High profile Fits 3/8" dovetail 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

AirForce 1" Rings, Medium, 9.5-13.5mm Dovetail $24 1" rings Medium profile Fits 9.5 mm-13mm dovetails 4 hex screws/ring to secure the scope Vertical scope stop The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Leapers 30mm Rings, Medium, 3/8" Dovetail $11.99 30mm rings Medium profile Fits 3/8" dovetail 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

BKL 1" Rings, 3/8" or 11mm Dovetail, Offset, Silver $42.6 1" rings Fits 3/8" or 11mm dovetail Offset mount for additional eye relief Silver

Gamo 4×32 Scope, 1" Tube, 11mm Dovetail Rings $35.94 4x magnification 32mm objective lens 1" tube Fully coated optical glass Includes 11mm dovetail rings

BKL 30mm Rings, 3/8" or 11mm Dovetail, Offset, Black $54 30mm rings Fits 3/8" or 11mm dovetail Offset for additional eye relief Black

Crosman B272 4-Pc Intermount, 3/8" Dovetail $17.94 Attaches to the barrel & provides a 3/8" dovetail Includes 1 set, which is 2 bases (each base has 2 sides that are screwed together) Black matte finish Fits current production Benjamin & Sheridan airguns Mounts so far forward that you’ll have to use a pistol scope to get the right eye relief. Do not grab any part of the scope when pumping your gun!

Beeman 5030M 1" Rings, Medium, 9.5-11.5mm Dovetail $45.54 1" rings Medium profile Fits 9.5-11.5mm dovetail 4 hex screws/ring secure the scope Vertical scope stop pin (removable) The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Beeman 5036 1-Pc Mount w/1" Rings, High, 9.5-11.5mm Dovetail $79.14 1" rings High profile Fits 9.5-11.5mm dovetail 4 hex screws/ring secure the scope The hex screws on the base let you adjust the base to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Beeman 5030H 1" Rings, High, 9.5-11.5mm Dovetail $45.54 1" rings High profile Fits 9.5-11.5mm dovetail 4 hex screws/ring secure the scope Vertical scope stop pin (removable) The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

BKL 3/8" or 11mm Dovetail Riser, .60" Long, Silver $21 3/8 or 11mm dovetail riser .60" long .68" high Use with BKL mount 257 Silver Formerly BKL-280

BKL 3/8" or 11mm Dovetail Riser, 1" Long, Silver $33.6 3/8 or 11mm dovetail riser .765" high Same length as BKL mounts 263 & 301 Packaged as a set Silver Formerly BKL-266

B-Square 10045 30mm Interlock Fixed Rings, 11mm Dovetail $27.59 30mm rings Fits 11mm dovetail 4 hex screws/ring secure the scope Vertical stop pin Aircraft-grade aluminum Black matte finish

Gamo 1-Pc Mount w/1" Rings, 3/8" Dovetail $23.99 1" rings Fits 3/8" dovetail 4 screws/ring cap secure the scope 3 hex screws secure the base to the gun rail

AirForce Self-Centering Tri-Rail, 11mm Dovetail $36 Self-centering Tri-rail base 11mm dovetail for mounting optics Mounting surfaces on 3 sides 6 hex screws secure the rail For AirForce Airguns Condor, Talon & Talon SS air rifles & TalonP air pistol Full-length clamping guarantees a rock-solid foundation for your airgun accessories. Made for AirForce sporting air rifles and the TalonP air pistol, the Tri-rail lets you load up your air gun with lots of accessories that make hunting and shooting a lot more fun…and also increases accuracy.

Walther RAM P99 Paintball Pistol Extra Magazine $21.59 The Walther P99 RAM (Real Action Marker) Magazine has a 9-shot capacity and holds either .43 caliber paintballs or .43 caliber rubberballs. Additional ammo magazines are handy for training or the ultimate in paintball reality. Have a couple of extras in your ammo belt for quick re-loading action. The perfect addition to your P99 paintball pistol. Don’t get caught with an empty clip. One Per Package.

Centra Rear Sight, Adjustable Aperture, Fits 3/8" or 11mm Dovetail $522.58 Centra rear sight Peep (aperture) sight Precision adjustments for windage & elevation Fits 3/8" or 11mm dovetail Superior quality, superior sight! Attaches with hex screws Incl. Allen wrench and manual

BKL 1" Rings, 14mm Dovetail, Double Strap, Matte Black $43.8 1" rings Fits 14mm dovetail Double strap (4 screws per cap, instead of 2; 2 screws per base, instead of 1) Matte black

BKL 30mm Rings, 3/8" or 11mm Dovetail, Double Strap, Silver $68.4 30mm rings Fits 3/8" or 11mm dovetail Double strap (4 screws per cap, instead of 2; 2 screws per base, instead of 1) Silver

Daisy Globe Front Sight + Insert, 3/8" Dovetail $23.99 Front globe sight Accepts inserts Includes one insert Fits 3/8" dovetail Does not work with the Daisy peep sight Use with Daisy Avanti diopter sight (model 5996)

BKL 1-Pc Mount, 1" Rings, 14mm Dovetail, Matte Black $65.4 1-piece mount 1" rings 4" long Fits 14mm dovetail 6 screws on base Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 3/8" or 11mm Dovetail Riser, 1-5/8" Long, Silver $28.5 3/8 or 11mm dovetail riser 1-5/8" long .76" high Use with BKL mount 253 Silver Formerly BKL-272 BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

Beeman 5040 1-Pc Mount w/1" Rings, Medium, 9.5-11.5mm Dovetail $79.14 1" rings Medium profile Fits 11mm dovetail 4 hex screws/ring secure the scope Vertical scope stop pin (removable) Black matte finish Thehex screws on the base let you adjust the base to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

AirForce 1" Rings, High, 9.5-13.5mm Dovetail, See-Thru $24 1" rings High profile Fits 9.5 mm to 13mm dovetail See-thru mount Dual-position clamping system Threaded vertical recoil stop pin 4 hex screws/ring for securing scope Twice the clamping area of many conventional mounts Superior scope retention The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Leapers Accushot 1" Rings, High, 9.5-11.5mm Dovetail $11.99 1" rings High profile Fits 9.5mm to 11.5mm dovetail Vertical stop pin The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths. Special tape inside the rings keeps your scope tight without excessive clamp pressure!

BKL 3/8" or 11mm Dovetail Riser, 4" Long, Silver $51.3 3/8 or 11mm dovetail riser 4" long Use with any combination of BKL rings Silver Designed for semi-auto actions and airgun receivers Formerly BKL-268 BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

CenterPoint 1" Rings, High, 3/8" Dovetail $15.54 1" rings High profile Fits 3/8" dovetail 4 hex screws/ring secure the scope These high-profile rings fit 1" scope tubes and are held in place by 4 hex screws that secure your scope firmly while you shoot. These rings can be mounted on all guns equipped with a 3/8" dovetail.

Crosman Tactical Airsoft/Paintball Face Mask $19.14 Airsoft/paintball face mask Wide, clear visibility through 1-piece goggles Shatterproof goggles have anti-fogging lenses & can be worn over glasses Rubber frame around goggles Lightweight mask is vented & has an adjustable nylon strap

Centerpoint 1" Rings, Medium, 3/8" Dovetail $14.39 1" rings Medium profile Fits 3/8" dovetail 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Sports Match 30mm Rings, Extra-High, Adjustable, 9.5-11mm Dovetail $71.99 30mm rings Extra-high profile Fits 9.5mm to 11mm dovetail 4 hex screws per ring cap Removable scope-stop pin Adjustable for height & elevation Sports Match mounts have an excellent reputation for quality and strength. The adjustable height feature is a nice feature not found on most airgun mounts.

Leapers Accushot 1-Pc Mount w/1" Rings, 3/8" Dovetail $17.94 1" rings Medium profile Fits 3/8" dovetail 100mm base length 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Mount w/1" Rings, High, 11mm Dovetail $21.54 1" rings High profile Fits 11mm dovetail 4 hex screws/ring secure the scope 100mm base length 80mm between rings Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Mount w/30mm Rings, High, 11mm Dovetail $17.94 Limited Lifetime Warranty 30mm rings High profile Fits 11mm dovetail 4 hex screws/ring secure scope 100mm base length Vertical stop pinSpecial tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Mount w/30mm Rings, Medium, 3/8" Dovetail $17.34 30mm rings Medium profile Fits 3/8" dovetail 100mm base length 3 hex screws/ring secure the scope Vertical stop pin Limited lifetime warranty Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Magnum Reserch RAM Desert Eagle $269.99 Paintball / Rubberball Marker

BKL 1" Rings, 3/8" or 11mm Dovetail, High, Matte Black $25.5 1" rings Fits 3/8" or 11mm dovetail High mount Matte black

BKL 1" Rings, 3/8" or 11mm Dovetail, Offset, Matte Black $42.6 1" rings Fits 3/8" or 11mm dovetail Offset mount for additional eye relief Matte black

RAM X50 Paintball Pistol $299.94 Marker Training Pistol

Sports Match 1" Rings, High, Adjustable, 9.5-11mm Dovetail $103.19 1" rings High profile Fits 9.5mm to 11mm dovetail 4 hex screws per ring cap No scope-stop pin Adjustable for windage, elevation and height It’s rare to find so many features in scope rings, but these Sports Match rings have them! Your scope will be useful for more air rifles because these mounts can be adjusted in so many ways. No scope-stop pin, so don’t use this on powerful or heavy-recoiling spring-piston air rifles.

Hammerli 850 AirMagnum 11mm-to-Weaver Scope Rail, Fits Most Guns w/11mm Dovetail $35.29 11mm-to-Weaver scope rail Mounts on RWS 850 AirMagnum receiver Fits almost any gun with an 11mm dovetail Attaches on top of the 11m dovetail grooves in the receiver Weaver/Picatinny rail for accessories Makes it easy to mount scopes & other accessories

BKL 2-Pc 3/8" or 11mm Dovetail to Weaver Adapter, 1" Long, Matte Black $34.2 3/8" or 11mm dovetail to Weaver adapter (rail accepts Weaver rings) 1" long 2 screws per base Matte black

BKL 3/8" or 11mm Dovetail Riser, .60" Long, Matte Black $21 3/8 or 11mm dovetail riser .60" long .68" high Use with BKL mount 257 Matte black Formerly BKL-280

BKL 3/8" or 11mm Dovetail Riser, 1" Long, Matte Black $33.6 3/8 or 11mm dovetail riser .765" high Same length as BKL mounts 263 & 301 Packaged as a set Matte black Formerly BKL-266

Walther Scope Base, Fits Lever Action CO2 Rifle, 11mm Dovetail & Weaver $35.99 Fits Walther Lever Action CO2 rifle Attach either Weaver mounts or 11mm dovetail rings to this base Ideal for attaching a scope or dot sight

UTG 3/8" Dovetail-to-Weaver/Picatinny Rail Adapter, 2pcs $8.39 3/8" & 11mm dovetail-to-Weaver/Picatinny rail adapter Fits 3/8" and 11mm dovetails on airguns and rimfire guns 1" long .93" wide .24" high .18 oz 2 adapters If your air gun or rimfire gun has a scope dovetail that measures either 11mm or 3/8" (approx. 9.5mm), you can use this lightweight aluminum adapter to attach your Weaver and Picatinny mounts to your smaller 11mm and 3/8" dovetails. This clever device clips into the base of your Weaver or Picatinny mount (both 1-pc mounts and 2-pc mounts), thereby reducing the size of the clamping jaws on the mount! A very easy way to make your mounts more useful for a wider range of guns. In fact, you can leave your optics in the mounts and move them from gun to gun! You’ll still have to resight the gun after attaching the scope, but you won’t have to reset or retighten the scope in the mount.

BKL 1" Rings, 3/8" or 11mm Dovetail, Double Strap, Silver $43.2 1" rings Fits 3/8" or 11mm dovetail Double strap (4 screws per cap, instead of 2; 2 screws per base, instead of 1) Silver

BKL 1" Rings, 3/8" or 11mm Dovetail, Double Strap, High, Matte Black $45 1" rings Fits 3/8" or 11mm dovetail Double strap (4 screws per cap, instead of 2; 2 screws per base, instead of 1) High mount Matte black

BKL 1" Rings, 3/8" or 11mm Dovetail, Double Strap, Matte Black $43.2 1" rings Fits 3/8" or 11mm dovetail Double strap (4 screws per cap, instead of 2; 2 screws per base, instead of 1) Matte black

BKL 1" Rings, 3/8" or 11mm Dovetail, Double Strap, Offset, Silver $62.7 1" rings Fits 3/8" or 11mm dovetail Offset mount for additional eye relief Double strap (4 screws per cap, instead of 2; 2 screws per base, instead of 1) Silver

Walther Combi Rail, Fits CP88, Beretta 92FS & Colt CO2 Pistols, 11mm Dovetail & Weaver Rail $33.07 11mm dovetail & Weaver (22mm) rail Securely fastens with 2 screws Black matte finish Fits Walther CP88, Beretta FS92 & Colt CO2 pellet guns (these are guns with removable rear sights)

BKL 30mm Rings, 3/8" or 11mm Dovetail, Double Strap, Matte Black $68.4 30mm rings Fits 3/8" or 11mm dovetail Double strap (4 screws per cap, instead of 2; 2 screws per base, instead of 1) Matte black

BKL 30mm Rings, 3/8" or 11mm Dovetail, Double Strap, Offset, Matte Black $79.8 30mm rings Fits 3/8" or 11mm dovetail Offset mount for additional eye relief Double strap (4 screws per cap, instead of 2; 2 screws per base, instead of 1) Matte black

BKL 30mm Rings, 3/8" or 11mm Dovetail, Double Strap, Offset, Silver $79.8 30mm rings Fits 3/8" or 11mm dovetail Offset mount for additional eye relief Double strap (4 screws per cap, instead of 2; 2 screws per base, instead of 1) Silver

CenterPoint 1-Pc Off-Set Mount, 1" Rings, High, 3/8" Dovetail, 4 Screws/Cap $15.54 1" rings 1-pc off-set mount High profile Fits 3/8" dovetail 4 screws/ring cap 2 hex screws secure the base Attach a scope to your favorite airgun, airsoft gun or rimfire with this 1-pc off-set mount. The mount fits a 3/8" dovetail and has 2 hex screws on the base. The rings have 4 hex screws per cap that hold your scope solidly in place.

BKL 1-Pc Mount, 1" Rings, 14mm Dovetail, 4" Long, Matte Black $48.3 1-piece mount 1" rings 4" long Fits 14mm dovetail Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 1-Pc Mount, 1" Rings, 3/8" or 11mm Dovetail, 3" Long, Matte Black $39.9 1-piece mount 1" rings 3" long Fits 3/8" or 11mm dovetail Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 1-Pc Mount, 3" Long, 1" Rings, 3/8" or 11mm Dovetail, Silver $39.9 1-piece mount 1" rings 3" long Fits 3/8" or 11mm dovetail Silver BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 1-Pc Mount, 30mm Rings, 3/8" or 11mm Dovetail, 4" Long, 6 Base Screws, Silver $68.4 1-piece mount 30mm rings Fits 3/8" or 11mm dovetail 4" long 6 screws on base Strongest BKL mount Silver BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 1-Pc Mount, 30mm Rings, 3/8" or 11mm Dovetail, 4" Long, Offset, Matte Black $68.4 1-piece mount 30mm rings Fits 3/8" or 11mm dovetail 4" long Offset mount for additional eye relief Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 1-Pc Mount, 30mm Rings, 3/8" or 11mm Dovetail, 4" Long, Offset, Silver $68.4 1-piece mount 30mm rings Fits 3/8" or 11mm dovetail 4" long Offset mount for additional eye relief Silver BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 1-Pc Mount, 4" Long, 1" Rings, 3/8" or 11mm Dovetail, High, Matte Black $51.3 1-piece mount 1" rings 4" long Fits 3/8" or 11mm dovetail High mount Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 1-Pc Mount, 4" Long, 1" Rings, 3/8" or 11mm Dovetail, Matte Black $45.6 1-piece mount 1" rings 4" long Fits 3/8" or 11mm dovetail Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 1-Pc Mount, 4" Long, 1" Rings, 3/8" or 11mm Dovetail, Silver $45.6 1-piece mount 1" rings 4" long Fits 3/8" or 11mm dovetail Silver BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 3/8" or 11mm Dovetail Riser, 1-5/8" Long, Matte Black $28.5 3/8 or 11mm dovetail riser 1-5/8" long .76" high Use with BKL mount 253 Matte black Formerly BKL-272 BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 3/8" or 11mm Dovetail Riser, 4" Long, Matte Black $51.3 3/8 or 11mm dovetail riser 4" long Use with any combination of BKL rings Matte black Designed for semi-auto actions and airgun receivers Formerly BKL-268 BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

Beeman 5039 1-Pc Adjustable Mount w/1" Rings, High, 9.5-11mm Dovetail $90.6 1" rings High profile Fits 9.5-11.5mm dovetail 4 hex screws/ring to secure scope Adjustable for windage & elevation Ideal for guns that need additional scope elevation The hex screws on the base let you adjust the base to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

CenterPoint 1-Pc Mount, 1" Rings, High, 3/8" Dovetail, 4 Screws/Cap $14.34 1" rings 1-pc mount High profile Fits 3/8" dovetail 4 screws/ring cap 3 hex screws secure the base Whether you hunt, target shoot or casually plink in your backyard, this 1-pc mount will secure your scope firmly to your gun. The mount fits a 3/8" dovetail with 3 hex screws. The rings have 4 hex screws per cap.

CenterPoint 1-Pc Mount, 1" Rings, Medium, 3/8" Dovetail, 4 Screws/Cap $14.34 1" rings 1-pc mount Medium profile Fits 3/8" dovetail 4 screws/ring cap 3 hex screws secure the base This 1-pc mount will secure your scope firmly to your gun. The mount fits a 3/8" dovetail and has 3 hex screws on the base. Each ring has 4 hex screws per cap.

Gamo 1" Rings, High, 3/8" & 11mm Dovetail, See-Thru $17.94 1" rings High profile 3/8" & 11mm dovetail See-thru mount Black matte finish The screw on the base lets you adjust the rings to fit 3/8" & 11mm dovetails. The clamp is made to securely fit a range of dovetail widths. Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Tech Force 1-Pc Mount, 1" Rings, 11mm Dovetail, See-Thru $15.54 1" rings Medium profile Fits 11mm dovetail See-thru base 4 hex screws/ring secure the scope Includes 2 hex wrenches The Tech Force mount is an economical one that will work on any gun that has an 11mm base or dovetail. Since it has 4 screws per cap, it’ll hold your scope tight, even on magnum spring air rifles.

BKL 3/8" or 11mm Dovetail to Weaver Adapter, 4" Long, For Bolt-Action Guns, Matte Black $51.3 3/8" or 11mm dovetail to Weaver adapter (rail accepts Weaver mounts) 4" long Fits bolt-acton guns (right-hand or left-hand clearance) Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 3/8" or 11mm Dovetail to Weaver Adapter, 4" Long, Matte Black $51.3 3/8" or 11mm dovetail to Weaver adapter (rail accepts Weaver mounts) 4" long 6 screws on base Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 3/8" or 11mm Dovetail to Weaver Cantilever Adapter, 4" Long, Matte Black $45.6 3/8" or 11mm dovetail to Weaver adapter (rail accepts Weaver mounts) 4" long 2 screws in base Ideal for dot sights Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

Doro Sport Hardback Paintball Gloves, Large, Exposed Fingertips $11.51 Our Hardback gloves are the superior low-cost hand protection. The flexible plastic backside offers very good protection from underbrush and stray shots, while still being comfortable. The palm is made of soft suede that allows for great grip as well as comfort. Available in half finger models only. Hardback paintball gloves Large Exposed fingertips

UTG Red Laser, Integral 3/8" Dovetail Mount w/Adjustable Clamping $33.54 Red laser TS platform & SSS structure for durability Aim & instant-lock for precision Ambidextrous push-button switch & remote pressure switch Anodized black matte finish Uses 4 AG-13 (LR44) alkaline button batteries Includes 3/8" dovetail mount with adjustable clamping pressure

BKL 1" Rings, 3/8" or 11mm Dovetail, Double Strap, Offset, Matte Black $62.7 1" rings Fits 3/8" or 11mm dovetail Offset mount for additional eye relief Double strap (4 screws per cap, instead of 2; 2 screws per base, instead of 1) Matte black

Leapers Accushot 1" Rings, Medium, 3/8" Dovetail, 2 Screws/Cap $10.79 1" rings Medium profile Fits 3/8" dovetail Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1" Rings, Medium, 3/8" Dovetail, 4 Screws/Cap $11.99 1" rings Medium profile Fits 3/8" dovetail 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Bi-directional Offset Mount w/1" Rings, High, 11mm Dovetail $15.54 1-piece bi-directional offset mount 1" rings w/scope stop 11mm dovetail High profile 4 hex screws/ring 2 hex screws on base Mount in either direction 62mm integral base length 18mm wide 21mm saddle height Aircraft-grade aluminum

RWS Lock Down 1-Pc Mount w/1" Rings, 11mm Dovetail, Barrel Droop Compensation $33.54 1" rings Fits 11mm dovetail 2 hex screws per ring 4 hex screws secure base to scope rail 2 recoil stop pins .025" elevation compensates for barrel droop Made of aircraft-grade aluminum Includes hex wrench Black matte

RWS Lock Down 1-Pc Mount w/30mm Rings, 11mm Dovetail, Barrel Droop Compensation $33.54 30mm rings Fits 11mm dovetail 2 hex screws per ring 4 hex screws secure base to scope rail 2 recoil stop pins .025" elevation compensates for barrel droop Made of aircraft-grade aluminum Includes hex wrench Black matte

RAM X50 Paintball Pistol Magazine $23.99 RAM X50 magazine 9-rd removable mag Black

Benjamin CO2 & Air FIll Adapter, Fits Benjamin Air Tank or Standard Paintball CO2 Tank $83.99 Made specifically for the Dual Fuel capability of the Benjamin Discovery & Marauder and the Crosman Challenger. Includes: CGA-320 fitting for Benjamin carbon fiber tank or a standard paintball CO2 tank Fitting is .825×14 (standard paintball CO2 connector size) 7" stainless steel braided hose (12" overall length) Patented bleeder valve Female Foster quick-disconnect fitting

BKL 1-Pc Mount, 30mm Rings, 3/8" or 11mm Dovetail, 4" Long, 6 Base Screws, Matte Black $68.4 1-piece mount 30mm rings Fits 3/8" or 11mm dovetail 4" long 6 screws on base Strongest BKL mount Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 1-Pc Mount, 4" Long, 1" Rings, 3/8" or 11mm Dovetail, 6 Base Screws, Matte Black $62.7 1-piece mount 1" rings 4" long Fits 3/8" or 11mm dovetail 6 screws on base Ideal for magnum airguns and semi-auto rimfire guns Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 1-Pc Mount, 4" Long, 1" Rings, 3/8" or 11mm Dovetail, 6 Base Screws, Silver $62.7 1-piece mount 1" rings 4" long Fits 3/8" or 11mm dovetail 6 screws on base Ideal for magnum airguns and semi-auto rimfire guns Silver BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 1-Pc Mount, 4" Long, 1" Rings, 3/8" or 11mm Dovetail, .007 Drop Compensation, Matte Black $57 1-piece mount 1" rings 4" long Fits 3/8" or 11mm dovetail .007" drop compensation Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 1-Pc Mount, 4" Long, 1" Rings, 3/8" or 11mm Dovetail, For Bolt-Action Guns, Matte Black $62.7 1-piece mount 1" rings 4" long Fits 3/8" or 11mm dovetail Fits bolt-action guns (right-hand or left-hand clearance) Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 1-Pc Mount, 4" Long, 1" Rings, 3/8" or 11mm Dovetail, For Bolt-Action Guns, Silver $62.7 1-piece mount 1" rings 4" long Fits 3/8" or 11mm dovetail Fits bolt-action guns (right-hand or left-hand clearance) Silver BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

B-Square 17401 Interlock Adjustable AA 1-Pc Mount w/1" Rings, 11.7mm Dovetail, Fits Webley Patriot $69.54 Specially designed with 2 crossbars to fit the grooves of Webley rifles, including the Patriot. 1" rings Fits 11.7mm dovetail on the Webley Patriot Extra-long base Windage/elevation adjustments 4 hex screws/ring secure the scope Vertical stop pin Gimbel action eliminates scope stress Black matte finish

Leapers Accushot 1-Pc Bi-directional Offset Mount w/30mm Rings, High, 11mm Dovetail $16.79 1-piece bi-directional offset mount 30mm rings w/scope stop 11mm dovetail High profile 4 hex screws/ring 2 hex screws on base Mount in either direction 67mm integral base length 18mm wide 21mm saddle height Aircraft-grade aluminum Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1" Rings w/Deluxe Tactical Tri-Rail, 3/8" Dovetail $31.14 Fits 3/8" dovetail 1" rings Provides 3 Weaver/Picatinny rails for accessories 4 screws/ring secures the mount Optimized rail spacing for stable, adequate mounting Special tape inside the rings keeps your scope tight without excessive clamp pressure!

BKL 1-Pc Mount, 4" Long, 1" Rings, 3/8" or 11mm Dovetail, 6 Base Screws, High, Matte Black $62.7 1-piece mount 1" rings 4" long High mount Fits 3/8" or 11mm dovetail 6 screws on base Ideal for magnum airguns and semi-auto rimfire guns Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 1-Pc Adjustable Scope Mount, 1" Rings, 3/8" Dovetail, Black $79.8 1-pc scope mount 3/8" dovetail Low profile 1" rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8" side rails for mounting other accessories 2.5" of clamping length 4" overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz. 6 base screws Matte black Includes 3 hex wrenches Got barrel droop? This new mount will help you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails offer more space to add a laser and a flashlight to augment a scope.

BKL 1-Pc Adjustable Scope Mount, 30mm Rings, 3/8" Dovetail, Black $79.8 1-pc scope mount 3/8" dovetail Low profile 30mm rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8" side rails for mounting other accessories 2.5" of clamping length 4" overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz. 6 base screws Matte black Includes 3 hex wrenches Got barrel droop? This BKL Tech mount lets you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails give you room to mount a laser and flashlight.

Leapers 5th Gen 3-9×40 TF2 Scope, Mil-Dot Reticle, 1/4 MOA, 1" Tube, 3/8" Dovetail Rings $53.94 Rifle scope 3-9x magnification 40mm objective lens 1" tube 1/4 MOA (1/4" click value @ 100 yds) Mil-dot reticle 35 yds parallax setting 36 ft to 12 ft field of view 3.3" to 3.1" eye relief 9.9mm to 4.5mm exit pupil 14.8 oz. 13.58" long Includes: Flip-open lens caps, hex wrench, hex screw, 3/8" medium dovetail rings, cleaning cloth & manual Other features: True Strength scope Nitrogen-filled Shockproof Fogproof Rainproof Angled integral sunshade TF2 target turrets Black matte finish Mount this UTG riflescope on any air rifle or rimfire rifle equipped with a 3/8" dovetail rail or grooves. This scope is part of Leapers’ True Strength series and is shockproof, fogproof and rainproof.

Scott Vectra Airsoft/Paintball Full Goggle Mask $31.14 This is the Vectra Goggle System which comes complete with visor, hypo-allergenic foam and high quality non-slip strap. It is made by Scott USA, one of the largest goggle manufacturers in the world! Designed so it can be worn over most glasses. A solid faceplate that wraps around your head and full ear protection complete this well designed system. The ASTM approved single lens is easy to remove and features an anti-fog coating that will last without scratching. Features: – Comes with removable visor – Fits over glasses – 170 degree field of vision – light weight, full face protection – Scratch Resistant – Anti-Fog Treated – Closed Cell Foam

RAM X50 Paintball Pistol, LE Blue Slide $239.4 Marker Training Pistol

CenterPoint Optics 3-9×32 Rifle Scope, Illuminated Mil-Dot Reticle, 1/4 MOA, 1" Tube, 3/8" Dovetail Rings $71.99 Rifle scope 3-9x magnification 32mm objective lens 1" tube 1/4 MOA (.25" click value @ 100 yds) Mil-dot reticle (red-green illuminated) 50 yds parallax setting 39′ to 13′ field of view @ 100 yds 3.3" eye relief 10mm to 3.5mm exit pupil 13 oz. 14.8" long Includes lens covers and 3/8" dovetail rings Other features: Hunter windage & elevation knobs Nitrogen-filled Shockproof Fogproof Waterproof

BKL 1-Pc Mount, 4" Long, 1" Rings, 3/8" or 11mm Dovetail, 6 Base Screws, .007 Drop Compensation, Matte Black $68.4 1-piece mount 1" rings 4" long Fits 3/8" or 11mm dovetail 6 screws on base .007" drop compensation Ideal for magnum airguns and semi-auto rimfire guns Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

RAM A-Series Paintball Rifle Magazine, Fits 47 & 74 Rifles $54 RAM A-series magazine, fits 47 & 74 rifles 23-rd mag Uses cases (not included)

RAM S-Series Paintball Rifle Magazine, Fits 11S & 13S, Black $54 RAM S-series magazine, fits 11S & 13S rifles 20-rd mag Uses cases (not included) Black

TSD Airsoft/Paintball Full-Face Mask, Goggle Lens $21.54 A must for all skirmishers! Full face protection from flying BBs Clear goggle lens Adjustable goggle strap Full ventilation for breathing Sturdy plastic construction

RAM R-Series Paintball Rifle Magazine, Fits 1R, 2R & 7R Rifles, Black $54 RAM R-series magazine, fits 1R, 2R & 7R rifles 20-rd mag Uses cases (not included) Black

RAM R-Series Paintball Rifle Magazine, Fits 1R, 2R & 7R rifles, LE Blue $54 RAM R-series magazine, fits 1R, 2R & 7R rifles 20-rd mag Uses cases (not included) Law-enforcement blue

RAM S-Series Paintball Rifle Magazine, Fits 11S & 13S, LE Blue $54 RAM S-series magazine, fits 11S & 13S rifles 20-rd mag Uses cases (not included) Law-enforcement blue

Daisy Laser Sight $29.99 Comes with: 7/8" Weaver Mount 3/8" Dovetail Mount ON/OFF switch Easy to mount on almost any gun!

UTG 11mm-to-Weaver Adapter, Vertical Scope Stop Pin $11.99 Base attaches to 11mm dovetail, top is a Weaver/Picatinny scope rail 3.94" long 9 slots for easy adjustments 2 hex screws attach 11mm dovetail to your gun’s 11mm scope base Incl. vertical scope stop pin

JBU 1" Rings, High, Weaver Mount, See-Thru $8.34 Limited Lifetime Warranty 1" rings High profile See-thru mount Fits Weaver dovetail 2 hex screws/ring secure the scope

Daisy 4x Rifle Scope $13.2 4x rifle scope with cross-hair reticle Adjustable for windage and elevation Mounts to most airguns with standard 3/8" dovetail mount

Daisy Electronic Point Sight $11.99 Fully adjustable for windage and elevation. Mounts to any rifle or pistol with 3/8" dovetail mount. Lighted aming point for more visible sighting. Battery included.

RAM .43 Caliber Paintballs, 430 rds, red and orange $23.99 .43 cal. paintballs 430 rds Red and orange RAM paintballs are essential RAM marker ammunition for law enforcement & milsim training scenarios. Stock up on these high-quality .43 caliber paintballs for an enjoyable and highly realistic gaming experience on the battlefield. Top-quality paintball ammo increases accuracy.

Kingman Training 11mm Premium Paintballs, 200 rds, yellow $10.74 11mm (.43 cal.) paintballs 200 rds Yellow High-quality Kingman Training paintballs are perfect for intense battlefield skirmishes. These paintballs should be used shortly after the seal has been broken. Prolonged storage in an unsealed container reduces paintball quality and performance.

Benjamin CO2 Fill Adapter, Fits Discovery, Marauder & Challenger $43.19 CO2 fill adapter Fits Benjamin Discovery & Marauder and Crosman Challenger C GA-320 fitting with .825×1/4 thread, 8" stainless steel hose, female Foster fitting Use with CO2 paintball tanks Do not use for filling gun with pressurized air

Air Venturi CO2 Bulk-Fill Adapter, Fits Umarex EBOS $23.99 Air Venturi CO2 bulk-fill adapter Fits Umarex EBOS Screw the adapter into the CO2 port of the EBOS With the adapter securely attached, screw a paintball CO2 bulk-fill tank (12 oz. recommended) into the adapter (see note below) Extremely economical…more shots, less money EBOS buttstock cannot be attached when you use this bulk-fill CO2 adapter NOTE: The paintball tank valve will immediately open when it’s completely screwed into the adapter. Make sure the adapter is tightly/securely installed in the gun before the tank is tightened down.

UTG Premium 1" Rings, Low, Weaver Mount, See-Thru $8.7 1" rings Low profile See-thru mount Fits Weaver dovetail Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Walther Bridge Mount, Fits Walther CP99 & CP Sport Pistols $35.99 Bridge mount Fits Walther CP99 & CP Sport CO2 guns Mount a scope or red dot on your gun This is an 11mm dovetail! To mount Walther’s optics, you’ll need their Weaver rail, which attaches to the 11mm dovetail on this bridge mount.

Walther, pre-filled, disposable, two 88 gram CO2 tanks $23.39 Walther’s 88g CO2 is the ideal power source for Walther Airguns and other air pistols and air rifles that shoot pellets, BBs, rubberballs or paintballs. Air pistols like the Walther P99 RAM (Real Action Marker) paintball gun and air rifles like the Beretta CX4 Storm and Hammerli 850 AirMagnum perform at their best when using Walther CO2. NOTE: CO2 can not be shipped by air services. We will only ship CO2 by regular ground delivery. We can not ship CO2 cylinders to Hawaii.

Air Venturi Front Globe Sight, Accepts Inserts $11.94 Globe front sight Fits Air Arms MPR rifle & Crosman Challenger Attaches to front dovetail with 2 screws Accepts inserts (one is included) Great focus with a better sight delivers increased accuracy. This is about as good as it gets. And the price is much lower than many European front sights.

Beeman Scope Stop $17.94 Firmly clamps on 11mm dovetail Stops creep from hard-recoiling airguns Vertical stop pin 3/4" square Requires 1/2" clearance (use with high rings) 2 Allen screws keep it tight Includes Allen wrench

UTG Leapers Premium 1" Rings, High, Weaver Mount, See-Thru $14.34 Limited Lifetime Warranty 1" rings High profile See-thru mount Fits Weaver dovetail 4 hex screws/ring secure the scope Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Premium 1" Rings, Medium, Weaver Mount, See-Thru $11.99 Limited Lifetime Warranty 1" rings Medium profile See-thru mount Fits Weaver dovetail 4 hex screws/ring secure the scope Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Crosman 0410 Targetfinder Rifle Scope $11.94 The Targetfinder rifle scope, Model 410, is a 4-power scope with turret sight adjustments, focusing eyepiece and precision coated optics. Easily mounts on all current Crosman air rifles with 3/8" dovetail grooved receiver. Not recommended for Crosman Model 795 Spring Air Rifle.

Benjamin Air Tank, 2000 psi Output $191.99 Benjamin air tank Designed for high-pressure air up to 3000 psi Regulated to 2000 psi output (specifically for the Benjamin Discovery & Marauder and the Crosman Challenger) 72 cubic inches Fills a 2000 psi rifle 6 to 8 times from one tankful To fill the Discovery, Marauder or Challenger, you’ll also need FAH002 (Dual Fuel adapter) Do not use this tank with paintball guns Includes male quick-disconnect coupling (can be filled with the Benjamin hand pump) 4.5" outside dia., 11.5" long, 4.40 lbs.

Air Venturi IZH Drozd Bulk-Fill Adapter $59.94 No more small powerlets. This original adapter will accept any paintball bottles (click here for 12 oz or 20 oz). (Approx. 1300 shots with 20-oz. tank & approx. 780 shots with a 12-oz. tank) Turn your IZH Drozd into a real fun auto BB machine gun! To install this unit, you must modify the magazine by cutting a small slot in the cover plate. This does not prevent you from going back to 12-gram CO2 cartridges if you decide to use them.

AirForce 11mm-to-Weaver Adapter $39.9 11mm (or 3/8") dovetail-to-Weaver/Picatinny adapter 3.04" clamping & mounting length .69" high 4.12" overall length 4 hex screws secure the base Includes a hex wrench Use on AirForce rifles and pistols or any other airgun or rimfire that has a 3/8" or 11mm dovetail. Weaver/Picatinny scope bases offer a much tighter grip on your scope mounts. This would be an especially good addition to any hard-recoiling spring-piston rifle. The cross slots deliver extra gripping area for the rings, making it almost impossible for the scope mount to shift. You may need to buy two of these adapters, depending on the length of the scope mount you’re using and on the length of the scope rail to which you’re attaching this adapter.

BKL 12-Way Scope Bubble Level, Fits 1" dia. Scope Tube $39.9 12-way scope bubble level Fits 1" dia. scope tube Easy installation This 12-way folding scope level by BKL is easy to install and eliminates cant. Position the level above, below or off to the side depending on your needs. By eliminating cant, your accuracy will improve. Included ring fits any 1" scope tube. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

Hawke Sport Optics 1-Pc Adapter, 3/8" to Weaver Rail $21.59 Hawke Sport Optics 1-pc adapter 3/8" to Weaver rail* Rail has some elevation built in to it Includes a rail and a hex wrench Black *3/8" is approximately 9.5mm, but this adapter has enough room in it to accommodate up to 11mm. If you need to convert your air gun’s 3/8" or 11mm dovetail to a Weaver, this 1-piece rail will do it and offer a firm, secure foundation for your optics. When selecting the mount for your scope, remember to account for the increased elevation offered by this adapter.

Hawke Sport Optics 2-Pc Adapter, 3/8" to Weaver Rail $29.99 Hawke Sport Optics 2-pc adapter 3/8" to Weaver rail* Includes 2 rails and a hex wrench Black *3/8" is approximately 9.5mm, but this adapter has enough room in it to accommodate up to 11mm. If you need to convert your air gun’s 3/8" or 11mm dovetail to a Weaver, this 2-piece set will do it and offer a firm, secure foundation for your optics.

BKL Scope Bubble Level $22.8 Scope bubble level Mounts on any BKL one- or two-piece scope mount (in the spreader holes) A canted gun cannot be accurate. Put this bubble level on your BKL scope mount to keep your gun level to increase accuracy.BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BSA Laser Sight With MTS $35.99 Red dot 11.3mm dot size at 10 yds 650nm laser beam 5mW (maximum legal power) Visible at 50yds (indoors, lit) & 100yds (outdoors, night) fits both Weaver & 11mm dovetail bases Two switches* *One switch is located on top of the body and the other, a momentary pressure sensitive switch and wire, can be mounted on the gun wherever you want to put it.

Air Venturi Steel Storm CO2 Bulk-Fill Adapter $59.99 Fits Umarex Steel Storm Eliminates need for disposable CO2 cartridges Go back to using disposable CO2 cartridges anytime No alterations are required! Easy to use, easy to attach Includes hose with bulk-fill CO2 tank connector, which connects to the gun’s CO2 inlet Bulk-fill CO2 tank NOT included No more small powerlets. This adapter accepts any paintball bottle (click here for 12 oz or 20 oz). Approx. 1300 shots with a 20-oz. tank & approx. 780 shots with a 12-oz. tank. With this setup, you’ll spend more time shooting and less time and money on 12-gram CO2 cartridges! Plug & play…absolutely no alterations are made to your Steel Storm!

Leapers Golden Image 4X32 Mini Size Range Estimating Mil-Dot Scope with Rings $35.94 4X32 mini size range estimating mil-dot scope Golden Image 4X32 mini with 5th Gen Body Mil-dot reticle, sapphire coating, classic elastic lens cover Specifications Magnification:4X Objective Dia.:32mm Field of View @100 yards: 28.0′ Eye Relief: 3.5" Exit Pupil: 6.0mm Click Value@100 yards: 1/4" Length: 7.7" Weight: 730g Battery: 10.8 oz Parallax Setting: @100yds Accushot Premium 1" Rings, Low, Weaver Mount, See-Thru. Specifications 1" rings Low profile See-thru mount Fits Weaver dovetail

BKL 12-Way Folding Scope Level, Fits 30mm dia. Scope Tube $39.9 12-way scope bubble level Fits 30mm dia. scope tube Easy installation Eliminate cant with BKL’s 12-way scope bubble level. Position the level above, below or off to the side depending on your needs. Reference the level before taking your shot, reposition your gun so it’s level and then shoot. You should see a difference in accuracy, as a canted gun is not accurate. Included ring fits any 30mm scope tube. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

Gamo Varmint Hunter Kit, 4×32 Rifle Scope, Laser & Flashlight $83.88 Rifle scope, flashlight & laser (specs are listed for scope only) 4x magnification 32mm objective lens 1" tube 1/4 MOA (1/4" click value @ 100 yds) Crosshair reticle 28.8′ field of view @ 100 yds 3" eye relief 11.8" long Includes pressure cables, removable caps with click buttons for laser & flashlight and 1-pc scope mount with 3/8" dovetail with rings for flashlight and laser. Other features: Hunting turrets Fully coated lenses Shockproof Fogproof Waterproof Anodized matte finish

UTG Homeland Security KIS Covert Gun Case, 38", Black $32.34 Gun case 1.5" thick padded high-density foam Concealed dual rifle storage capacity 11"x10" Velcro closure pocket for accessory storage 15"x8" zippered pocket for additional storage 1.5" reinforced wrap-around carry handle 1.5" adjustable shoulder strap #8 heavy duty zipper with fully lockable dual zipper heads Double d-rings at both ends Clear name tag holder Polyester material 38"x11" Black Protect your rifle against everyday wear & tear with this 38" UTG padded rifle case. This case has a concealed dual rifle storage capacity and is thickly padded with high-density foam for maximum protection. Store spare magazine clips and other accessories in the 11"x10" Velcro closure pocket. Stores all sporting firearms, knock-down firearms, rifles with retractable stocks, pistols and paintball guns.

CenterPoint AR22 Series 4x32mm duplex reticle rifle scope, 3/8" rings $35.99 Rifle scope Power: 4x Obj. Lens Dia (mm): 32 AO: N Illum. Reticle: N Reticle: Duplex Field of View (ft. at 100 yds): 28.0 Eye Relief (in.): 3.0 Exit Pupil (mm): 6.0 Parallax Setting (yds): 30 yds W/E Adjust Click Value: 1/4 M.O.A Tube Size: 1" Length (in.): 10.5 Weight (oz.): 12.9 Rings Included: 3/8" dovetail rings Lens Covers: Elastic Sun Shade: N Duplex reticle Tool-free, finger adjustable windage and elevation dials Includes lens covers and medium profile premium rings One piece tube construction CenterPoint’s Advantage lens coating reduces light loss and limits glare, while allowing optimum light transmission Ergonomically designed grips for fast focus eyepiece and magnification Duplex reticle 100% waterproof, fogproof and shockproof

Carbon Fiber Tank, 4500 psi, 88 cu ft $839.99 DOT-approved Carbon fiber filament wound over aluminum bladder 88 cu ft 4500 psi max pressure 11.3 lbs dry weight Includes: Hose with 1/8" BSPP threads on both ends Seal washer Hose has an inline gauge (eliminates use of a yoke) Air Venturi female quick-disconnect adapter with 1/8" BSPP male threads on one end This is not a scuba tank. It’s a carbon fiber tank, which is also called an scba tank, and has a high-pressure scba valve…like the one firefighters use on their scba tanks. Many dive shops do not have the ability to fill these tanks. In some towns, the fire department has a compressor that can fill a high-pressure carbon fiber tank, as firefighters use smaller scba tanks for breathing equipment during rescues. You might want to approach your local fire department and ask if they would be willing to fill your high-pressure carbon fiber/scba tank from their compressor. Another alternative is to contact a local paintball store, as paintballers use carbon fiber tanks to fill their markers. If the only alternative you have is to fill your high-pressure carbon fiber scba tank at a dive shop, a 1/8" BSPP male to DIN female adapter (our part # AA-Z2128-300) can temporarily replace the hose on the valve adapter so the dive shop can fill your tank.

UTG Drooper Scope Rail, 11mm-to-Weaver Adapter, Compensates for Droop & Stops Scope Shift $22.74 UTG DNT06 scope mount base Attaches to rifle’s 11mm scope rail Fits any rifle with an 11mm scope base…either dovetail grooves or a raised rail Decreases barrel droop with 10" upward compensation at 30 yds Stops scope shift–forever! Scope base provides a secure foundation for Weaver/Picatinny mounts 4 hex screws firmly attach base to your Diana rifle Dual scope-stop holes to stop movement 0.68" saddle height 0.78" total height 1" wide 4.72" long 11 slots to accommodate various eye relief adjustments 3.8 oz. Aircraft-grade aluminum Includes 2 hex wrenches, hex screw and set screw Barrel droop is a common issue in some air guns, but it can make it difficult to use a scope. To get the most accuracy from your air rifle, mount a scope, but don’t put it directly on the airgun’s original rail. Instead, mount this great adapter, which offers 10" of upward compensation (at 30 yds.), and then mount your scope. You’ll wonder how you ever got along without it!

Leapers Golden Image 4X32AO Rifle Scope, Mil-Dot Reticle, 1" Tube, Weaver Rings $47.99 True Strength Revolutionary Triple S Structure (Smart Spherical Structure) for the most effective telescopic functions Rifle scope Full size, adjustable objective scope, from 7.5 yards up 5th Gen square knob housing and finger adjustment knobs Mil-dot range estimating reticle Complete with flip-open lens caps, 2" sun shade and RGWM-25L2 AccuShot tactical rings SpecificationsMagnification: 4XTube Dia.: 1"Objective Dia.: 32 mmField of View @100 yards: 34′Eye Relief: 3.5"Exit Pupil: 8.0 mmClick Value@100 yards: 1/4"Length: 11.8"Weight: 12.9ozParallax Setting: 7.5 yds – infinity The rings have 2 screws per cap. Please Note: The mounts that are included are Weaver mounts, intended for airsoft gun mounting. If you wish to mount this scope on a 3/8 (11mm) Dovetail base, you will need different mounts. We recommend the following: Accushot Medium Profile Airgun Rings Accushot Medium Profile Full Length Integral Mount Weaver intermount for Benjamin Sheridan rifles