Do you have a concrete pad thicker take longer to create?

I guess most kids think you get concrete concrete 95% of its strength in about 28 days. Does that "the rule of thumb" only work for the "normal" thickness of concrete (4 " to 5 ")? Would a 16" thick slab take longer to get 95% of its strength? If so, how much longer? Any gurus please advise specific. Thanx!

Yes and no. The more concrete is allowed to cure (the slower it dries), the strongest ultimately receives. Concrete in the nucleus of a 16 "slab will eventually become much more difficult than the outside because of the extra moisture trapped in the nucleus. So the concrete in a slab of 16 "will be as strong as any other 4" slab after 28 days, but ultimately, the core will much stronger after several months.

Imprintor Pad Printer Set Up Video (video 4 of 4)

G&G Knee Pads & Elbow Pads Set, Large, Desert Color $39.54 Knee pads & elbow pads set Desert color Large This G&G knee & elbow pad kit will protect you from unnecessary scrapes and bruises in the battlefield. The pads are camo colored and have a durable plastic shield for maximum protection. Pick one up for your next airsoft skirmish!

King Arms Blaser R93 LRS1 Airsoft Sniper Rifle $263.99 Adjustable cheek and butt pad

AirForce Talon/Condor Swivel Stud Set $24 Sling Swivel Stud set comes with quick detachable swivels and can be attached to either the top or bottom of the rifle using the sling swivel studs.

O-Ring Set – 0099-B Replacement O-rings, 4 $4.5 0099-B replacement O-rings (4) 0099-B O-Ring replacement set for BSA high pressure probes.

O-Ring Set – 0099-W Replacement O-rings, 4 $4.5 O-Ring replacement set for Evanix, FX, Logun and Raider high pressure probes

Air Venturi PCP Scuba Charging Set $95.99 Scuba charging set Fits k-valves Hose ends with 1/8 female BSPP No extra adapters needed if you use this for the following guns: Air Arms, Evanix, Sumatra, BAM & Sam Yang Big Bore 909 (the adapter included with these guns attaches to this set) Also fits these guns, but you’ll need to get the adapters indicated: Marauder, Discovery & Challenger rifles: you’ll need Quickadap1EM1B (female quick-disconnect adapter) Dragon Slayer, Fire 202 & 707 Ultra rifles (which come with 7/16 probes): you’ll need PYadapterEJ

GrovTec Push-Button Swivel Set, 1" Loops, Black Oxide $19.19 Push-button swivel set 1" loops Black oxide finish Flush mounting system No protruding swivel studs Forend & buttstock swivel bases are countersunk into stock & glued in place Easy installation, easy removal

B-Square Professional Gunsmith Screwdriver Set $34.74 The 32 piece set includes: 1 magnetized driver handle with no-slip grip, 11 gunsmith ground medium and fine blade slotted bits, 3 Phillips bits, 8 hex bits, 2 torx bits, 2 posi-drive bits, 1 long 3/32" hex bit, 1 long 5/32" fine slotted bit, 1 long #1 Phillips bit, 1-1/4" socket drive adapter and comes in a sturdy molded storage case with individual compartments for each item. Special gunsmith-ground bits are perfect for quick repairs in the field or on the bench for rifles, pistols, scopes, rings, bases as well as for hunting, camping and hundreds of household uses.

CenterPoint 1-Pc Off-Set Mount, 1" Rings, High, 3/8" Dovetail, 4 Screws/Cap $15.54 1" rings 1-pc off-set mount High profile Fits 3/8" dovetail 4 screws/ring cap 2 hex screws secure the base Attach a scope to your favorite airgun, airsoft gun or rimfire with this 1-pc off-set mount. The mount fits a 3/8" dovetail and has 2 hex screws on the base. The rings have 4 hex screws per cap that hold your scope solidly in place.

GrovTec Swivel Set, Wood Screws, Fits Bolt-Action Rifles, 1" Loops, Black Oxide $10.79 Swivel set for bolt-action rifles 1" loops Black oxide finish Includes 1/2" wood screw fore end swivel stud, 3/4" wood screw rear, spacers & 2 locking swivels

TSD JBU Metal Shim set for all gearbox $4.74 0.1mm x 6pcs 0.3mm x 6pcs 0.5mm x 6pcs

AirForce Adaptive Target Sight Set, Fits Most 10-Meter 3-Position Rifles & All AirForce Guns $205.2 Adaptive target sight set (front & rear sights included) Fits most 10-meter 3-position rifles & All AirForce guns Front sight accepts standard European aperture inserts (not included) Both sights have large amount of vertical adjustment Rear sight fits 11mm airgun rail Rear sight has 1/8 MOA click adjustment knobs & can be reset to zero Rear sight can be removed from its mounting base & clamped into a 1" scope ring Made in America

GrovTec Swivel Set, Wood Screws, Fits Some Lever-Action & Tube-Mag Rifles & Carbines, 1" Loops, Black Oxide $15.59 Swivel set for lever-action, tube-mag rifles & carbines 1" loops Black oxide finish 2-piece band fits mag tubes .630" to .675" diameter, band barrels of some Browning & Ruger models, .410 shotguns Includes 3/4" rear wood screw swivel stud, Allen wrench & 1 pair of locking swivels

O-Ring Set – 909 Replacement O-rings, 4 $5.04 Big Bore 909 and Shin Sung probe O-ring replacement. Please be aware that if your Big Bore 909 or Shin Sung rifle was made in or before 2005 you will need this (thicker) replacement O-ring. Dimensions: OD -.315" ID – .112" H – .103" 4 Pack (enough for two probes)

UTG Model 36 Handguard Picatinny Rail Set, Short, 2ct $11.39 Picatinny rails 7 numbered slots 2 screw holes per rail 3-7/8" long 3-375" between screw holes Aluminum 2.3 oz. Incl. 2 rails, 5 hex screws & Allen wrench Attach these Picatinny rails and add a scope, dot sight or laser to your airsoft gun or firearm. Hex screws make it easy to attach and remove.

UHC Revolver 131, 132, 133 BB Shell Set $11.04 Includes 8 shells to load BBs into

UHC Revolver 937, 938, 941 BB Shell Set $7.44 Includes 8 shells to load BBs into

AirForce 1/8" and 1/4" BSPP Refill Adapter set $27.9 For AirForce air rifles. Fits the FX/Logun three stage pump.

HFC Metal Shells for G132 & 133 Gas Revolvers $15.54 Spare Shells for HFC HG-132 & HFC HG-133 Gas Revolvers, 6pc to a set.

Crosman Precision Sight Set, Globe Front sight w/Insert, Rear Diopter Sight $143.94 Adjustable diopter rear sight and globe front sight with one insert (shown).

Creedmoor Sports Basics Roll-Up Shooting Mat, Black Elbow Pads, Pearl Gray $83.94 Creedmoor Sports Basics roll-up shooting mat Water-resistant material Textured, non-slip black elbow pads Jute padding Webbing with side-lock buckles to secure the rolled up mat Pearl gray 29.50"x68" 13 lbs. Whether you shoot in the Creedmoor position or any other prone position, this pad will help keep you dry and make it more comfortable. This pad is really sturdy and weighs 13 lbs.

UTG Deluxe Ergonomic Foregrip, OD Green $11.94 Deluxe ergonomic foregrip OD Green Non-slip Picatinny Mounting Deck to Slide on and Screw Tight Complete with battery compartment, pressure switch housing and Picatinny mounting deck Tactical Pattern Accenting a Cool Look Practical Side Slides Allow for Ambi Use of Pressure Pad

Crosman Airsoft Target Board $15.54 This target game board features the same scoring as the dart board. The target is designed specifically for plastic airsoft BBs. The special adhesive rubber pad lets the BBs stick to the target face and automatically slide down into the tray underneath. For airsoft use only.

Franzen Security Gun Combination Trigger Lock, Universal $13.19 Combination trigger lock Works on most firearms, airguns & airsoft guns Universal fit Ergonomic design facilitates rapid installation No keys to lose; set your own personal combination Complies with applicable laws Set multiple combination trigger locks with same combination The lock is set to to open at "000" Instructions for setting the combination: Put the lock in the open position by twisting the face of the lock (the half that displays the combination). Locate the set pin on the side of the lock. Using a ballpoint pen, push in the set pin and hold. Turn the dials one at a time to set your own code. Release the set pin after your code is set. Pull apart the lock halves and place the half with the combination over the triggerguard. Match the other half on the opposite side of the triggerguard and fit the shafts together. Press the lock together until it’s unmovable. Remove by dialing the combination, twisting the face of the lock and pulling it apart.

BKL 3/8" or 11mm Dovetail Riser, 1" Long, Matte Black $33.6 3/8 or 11mm dovetail riser .765" high Same length as BKL mounts 263 & 301 Packaged as a set Matte black Formerly BKL-266

BKL 3/8" or 11mm Dovetail Riser, 1" Long, Silver $33.6 3/8 or 11mm dovetail riser .765" high Same length as BKL mounts 263 & 301 Packaged as a set Silver Formerly BKL-266

Smith & Wesson Magnum 3G Safety Glasses, Clear Lenses, Black Frame $11.52 Magnum 3G safety glasses Clear lenses Black frame Polycarbonate lenses Ergonomically dimensioned 3-point fit Built-in hinge-stops help eliminate scratches Self-adjusting, ergonomic rubber nose pad with rubber fingers Meet ANSI Z87.1+ impact standard 99.9% UV protection S&W logo on frame Polycarbonate safety glasses protect your eyes from impact, but the glasses deteriorate due to scratches, light, etc., and should be replaced after 2 years.

Smith & Wesson Magnum Series Gold Metallic Mirror lens safety glasses $13.8 The Magnum Series safety glasses are ergonomically dimensioned for a 3 point fit, the ultimate in comfort. This pair comes in a Black Frame with Gold Metallic Mirror Lens. Perfect for the work place, shooting range or outdoors. Exceeds ANSI Z87.1 safety standards Provides maximum UV protection Ergonomic nose pad with self-adjusting rubber fingers Built-in hinge stops Polycarbonate safety glasses protect your eyes from impact, but the glasses deteriorate due to scratches, light, etc., and should be replaced after 2 years.

GrovTec Rifle Sling, 48"x1", Padded Nylon, Black $18.24 Rifle sling Black 48"x1" Extra-wide pad (padded nylon) Thumb loop relieves tension in hand & forearm Nylon stretch web on each end tab absorbs shock/recoil Radius-cornered end tabs don’t dig into skin Cut, sewn & finished in the US Requires swivels & swivel studs (not included)

GrovTec Rifle Sling, 48"x1", Padded Nylon, Realtree AP $18.24 Rifle sling Realtree AP pattern 48"x1" Extra-wide pad (padded nylon) Thumb loop relieves tension in hand & forearm Nylon stretch web on each end tab absorbs shock/recoil Radius-cornered end tabs don’t dig into skin Cut, sewn & finished in the US Requires swivels & swivel studs (not included)

AirForce LS-1 Laser, Waterproof & Shockproof $119.94 LS-1 red laser 1/2" dot at 10 yds, 4-1/2" dot at 100 yds Remote pressure pad with accordion cord Shockproof Waterproof Knurled adjustment/locking screws with coin-slot No special tools required to align beam Can be used on airguns, airsoft guns & firearms Includes 3-volt CR123A lithium battery 2.8 oz (with battery) 2.95"x1.34" Black matte finish

Smith & Wesson Magnum Black Frame Fog-free Safety Glasses $11.99 The Magnum Series safety glasses are ergonomically dimensioned for a 3 point fit, the ultimate in comfort. Comes in a Black Frame with FOG FREE Clear Lens. Exceeds ANSI Z87.1 safety standards Provides maximum UV protection Ergonomic nose pad w/ self-adjusting rubber fingers Built-in hinge stops Polycarbonate safety glasses protect your eyes from impact, but the glasses deteriorate due to scratches, light, etc., and should be replaced after 2 years.

Smith & Wesson Magnum Series Mini Clear Lens Safety Glasses, Fits Kids $9.59 Fits kids! The Magnum Series safety glasses are ergonomically dimensioned for a 3 point fit, the ultimate in comfort. Reduced size for smaller adults and youth. Comes in a Black Frame with Clear Lens. Exceeds ANSI Z87.1 safety standards Provides maximum UV protection Ergonomic nose pad with self-adjusting rubber fingers Built-in hinge stops Polycarbonate safety glasses protect your eyes from impact, but the glasses deteriorate due to scratches, light, etc., and should be replaced after 2 years.

Smith & Wesson Magnum Series Yellow Lens Safety Glasses, Fits Kids $9.59 Fits kids! The Magnum Series safety glasses are ergonomically dimensioned for a 3 point fit, the ultimate in comfort. Reduced size for smaller adults and youth. Comes in a Black Frame with Yellow Lens. Exceeds ANSI Z87.1 safety standards Provides maximum UV protection Ergonomic nose pad w/ self-adjusting rubber fingers Built-in hinge stops Polycarbonate safety glasses protect your eyes from impact, but the glasses deteriorate due to scratches, light, etc., and should be replaced after 2 years.

Jackson Safety Olympic Clear Lens Shooting Glasses/+1.5 Power $12.77 Stylish ergonomic GS7 nylon frame combines with sleek 7 base polycarbonate lenses for the ultimate in protection and style.Soft rubber nose pad with self-adjusting fingers for all day comfortExceeds ANSI Z87.1 2003 High Velocity Industrial Protection Standards Maximum ultraviolet protection up to 400 nanometersAvailable in clear with black frame. Magnification insert is molded into the lens. Polycarbonate safety glasses protect your eyes from impact, but the glasses deteriorate due to scratches, light, etc., and should be replaced after 2 years.

Jackson Safety Olympic Clear Lens Shooting Glasses/+2.5 Power $12.77 Stylish ergonomic GS7 nylon frame combines with sleek 7 base polycarbonate lenses for the ultimate in protection and style.Soft rubber nose pad with self-adjusting fingers for all day comfortExceeds ANSI Z87.1 2003 High Velocity Industrial Protection Standards Maximum ultraviolet protection up to 400 nanometersAvailable in clear with black frame. Magnification insert is molded into the lens. Polycarbonate safety glasses protect your eyes from impact, but the glasses deteriorate due to scratches, light, etc., and should be replaced after 2 years.

Bulldog Deluxe Top Load Digital Pistol Vault, 11"x8.5"x2.2", Combination Lock, Black $107.99 Bulldog deluxe digital pistol vault 11"x8.5"x2.2" (exterior dimensions) Combination lock with cylinder key override Deluxe foam interior with egg-crate bottom pad protects your gun’s finish Steel construction "Easy Guide" ribbed top for quick orientation to numeric pad "Smart Safe" technology remembers combination during power loss/when changing batteries More than 1000 lock combinations available Spring-loaded door for easy access Pre-drilled mounting holes Pre-drilled holes for optional security cable Durable powder coated black matte finish Includes mounting hardware Limit access and prevent theft with this personal pistol vault. If someone attempts to open the vault by guessing your combination, they have 4 tries…and then the vault shuts down and temporarily disables the control panel. In 3 minutes, the electronics automatically reset for combination re-entry. Ideal for airguns, firearms and airsoft guns. Protect your investment!

MTM Case-Gard Predator Shooting Rest, for Rifles & Pistols $52.74 Predator shooting rest Use with rifles and pistols Lightweight & easily adjusts Rock-solid stable (4 legs) Buttstock support for long guns quickly removes so you can use the front rest with handguns Precision height adjuster so you can zero-in for pinpoint accuracy Front rubber shooting pad will not mar your gun & steadies any gun, regardless of the barrel or stock shape Rest extends from 20" to 26.25" Front pad height adjusts from 8.5" to 11.5" Folds down to 22"x20" for easy storage 3.5 lbs MADE in USA The Predator shooting rest is lightweight, yet stable. It accommodates airguns, airsoft guns and firearms. If you shoot both rifles and pistols, this is the ideal rest. Converting your Predator shooting rest from a long gun to a handgun configuration will take you just a few seconds. Plus, the entire until collapses down to a compact package for easy storage.

Spare Shells for UHC UG134, UG135, UA933 & UA934 Revolvers $8.34 Spare Shells for UHC Gas & Spring Revolvers, 8pc to a set. Not compatible with UHC Spring Revolver Models UA937, UA938 & UA941. Use for UG134 & UG135 Gas and UA933 & UA934 Spring Revolvers.

Umarex Compensator, Fits Hammerli 850, Walther 1250 Dominator & Beretta CX4 Rifles $47.99 Rifle compensator Fits RWS 850 AirMagnum, Walther 1250 Dominator (do not use on .25 cal gun) and Beretta CX4 Storm Friction fit Set screw secures compensator to barrel

Crosman 459MT 2-Pc Intermount, 3/8" Dovetail $12.54 Attaches to the barrel & provides a 3/8" dovetail Fits Crosman models 2240, 2250, 2260, 2289, 1322, 1377, 1740 & 1760 Includes 1 set, which is 2 intermounts

UTG Special Operations Universal Tactical Black Leg Holster $17.94 Fully adjustable and removable belt hanger. Deluxe non-slip holster pad, and non-slip, fully adjustable and removable leg strap For maximum comfort and provide additional retention for your handgun during extreme operations, rappelling, swimming and jumping. Extra mag pouch. Thumb break security. Universal design – For most medium to large frame pistols. Adjustable closure – For a tight pistol barrel fit. Dimensions: Length: 7 inches Width: 3.5 inches – 2 inches For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a length that is greater than or equal to the length of the holster.

UTG Special Operations Universal Tactical Black Leg Holster, Left Handed $17.94 Fully adjustable and removable belt hanger. Deluxe non-slip holster pad, and non-slip, fully adjustable and removable leg strap – for maximum comfort and provide additional retention for your handgun during extreme operations, rappelling, swimming and jumping. Extra mag pouch. Thumb break security. Universal design – for most medium to large frame pistols. Adjustable closure – for a tight pistol barrel fit. Dimensions: Length: 7" Width: 3.5" – 2" For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a length that is greater than or equal to the length of the holster.

UTG Special Ops Universal Tactical Leg Holster, Army Digital Camo $17.94 Melt into the environment…go digital! Special Ops universal tactical leg holster Army digital camo Double thumb-break security system Deluxe non-slip holster pad Non-slip, fully removable, elastic leg strap for secure function Velcro close for longer guns Fully adjustable & removable belt hanger Heavy-duty buckle Extra mag pouch Fits medium- to large-frame guns 7"Lx3.5"W For the best fit, use with pistols 2" to 3.5" wide (from the bottom of the triggerguard up to the barrel) and at least 7" long.

UTG Special Ops Universal Tactical Leg Holster, Woodland Digital Camo $17.94 Melt into the environment…go digital! Special Ops universal tactical leg holster Woodland digital camo Double thumb-break security system Deluxe non-slip holster pad Non-slip, fully removable, elastic leg strap for secure function Velcro close for longer guns Fully adjustable & removable belt hanger Heavy-duty buckle Extra mag pouch Fits medium- to large-frame guns 7"Lx3.5"W For the best fit, use with pistols 2" to 3.5" wide (from the bottom of the triggerguard up to the barrel) and at least 7" long.

Phillips Pellet Holder for AirForce Talon & Condor Airguns, .177-.20 Cal, Holds 16 Rds, .250" Thick $12.6 Phillips Pellet Holder Holds .177 cal & .20 cal pellets 16 pellet slots Fits AirForce Talon & Condor airguns & Logun S-16 air rifle 3"x3.25" Velcro straps .250" pad thickness Wrap around gun’s tank or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun’s tank or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.

Phillips Pellet Holder for AirForce Talon & Condor Airguns, .177-.20 Cal, Holds 16 Rds, .325" Thick $12.6 Phillips Pellet Holder Holds .177 or .20 cal. pellets 16 pellet slots Fits AirForce Talon & Condor airguns & Logun S-16 air rifle 3"x3.25" .325" pad thickness Wrap around gun’s tank or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun’s tank or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.

Phillips Pellet Holder for AirForce Talon & Condor Airguns, .22-.25 Cal, Holds 16 Rds, .325" Thick $12.6 Phillips Pellet Holder Holds .22 cal & .25 cal pellets 16 pellet slots Fits AirForce Talon & Condor airguns & Logun S-16 air rifle 3"x3.25" Velcro straps .325" thick pad Wrap around gun’s tank or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun’s tank or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.

Phillips Pellet Holder for AirForce Talon & Condor Airguns, .22-.25 Cal, Holds 16 Rds, .425" Thick $12.6 Phillips Pellet Holder Holds .22 or .25 cal. pellets 16 pellet slots Fits AirForce Talon & Condor airguns & Logun S-16 air rifle 3"x3.25" Velcro straps .425" pad thickness Wrap around gun’s tank or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun’s tank or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.

GrovTec Gun Sling, Padded, True Timber Hunter Orange, 48" Long $17.94 GrovTec padded gun sling True Timber hunter orange 48"x1" Unique nylon Stretch Web absorbs shock w/out rebound End tabs have radiused corners Extra-wide tapered pad Thumb loop relieves tension & adds stability Non-skid Swivels not included Made in America Be seen! Hunter orange makes you more visible…an important point during hunting season. No matter what you use to hunt, this sling will make it easier to carry your air rifle or firearm.

Phillips Pellet Holder, .177-.20 Cal, Holds 20 Rds, .250" Thick $12.6 Phillips Pellet Holder Holds .177 cal & .20 cal pellets 20 pellet slots 3"x4" Velcro straps .250" pad thickness Wrap around gun or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive. Can also be used for studguns!

Phillips Pellet Holder, .177-.20 Cal, Holds 20 Rds, .325" Thick $12.6 Phillips Pellet Holder Holds .177 or .20 cal. pellets 20 pellet slots 3"x4" Velcro straps .325" pad thickness Wrap around gun’s buttstock or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun’s buttstock or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.

Phillips Pellet Holder, .22-.25 Cal, Holds 20 Rds, .250" Thick $12.6 Phillips Pellet Holder Holds .22 and .25 cal. pellets 20 pellet slots 3"x4" Velcro straps .250" pad thickness Wrap around gun’s buttstock or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun’s buttstock or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.

Phillips Pellet Holder, .22-.25 Cal, Holds 20 Rds, .325" Thick $12.6 Phillips Pellet Holder Holds .22 cal & .25 cal pellets 20 pellet slots 3"x4" Velcro straps .325" thick pad Wrap around gun or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive. Can also be used for studguns!

Phillips Pellet Holder, .22-.25 Cal, Holds 20 Rds, .425" Thick $12.6 Phillips Pellet Holder Holds .22 or .25 cal. pellets 20 pellet slots 3"x4" Velcro straps .425" pad thickness Wrap around gun buttstock or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun’s buttstock or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.

Phillips Pellet Holder, Long, .177-.20 Cal, Holds 20 Rds, .325" Thick $12.6 Phillips Pellet Holder Holds .177 or .20 cal. pellets 20 pellet slots 2"x6.5" Velcro straps .325" pad thickness Wrap around gun’s tank or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.

Jackson Safety Olympic Clear Lens Shooting Glasses/+2.0 Power $12.77 Stylish ergonomic GS7 nylon frame combines with sleek 7 base polycarbonate lenses for the ultimate in protection and style. Soft rubber nose pad with self-adjusting fingers for all day comfort Exceeds ANSI Z87.1 2003 High Velocity Industrial Protection Standards Maximum ultraviolet protection up to 400 nanometers Available in clear with black frame. Magnification insert is molded into the lens. Polycarbonate safety glasses protect your eyes from impact, but the glasses deteriorate due to scratches, light, etc., and should be replaced after 2 years.

Phillips Pellet Holder, Long, .177-.20 Cal, Holds 20 Rds, .250" Thick $12.6 Phillips Pellet Holder Holds .177 cal & .20 cal pellets 20 pellet slots 2"x6.5" Velcro straps .250" pad thickness Wrap around gun or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive. Can also be used for studguns!

Phillips Pellet Holder, Long, .22-.25 Cal, Holds 20 Rds, .250" Thick $12.6 Phillips Pellet Holder Holds .22 or .25 cal. pellets 20 pellet slots 2"x6.5" Velcro straps .250" pad thickness Wrap around gun or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.

Phillips Pellet Holder, Long, .22-.25 Cal, Holds 20 Rds, .325" Thick $12.6 Phillips Pellet Holder Holds .22 cal & .25 cal pellets 20 pellet slots 2"x6.5" Velcro straps .325" pad thickness Wrap around gun or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive. Can also be used for studguns!

Phillips Pellet Holder, Long, .22-.25 Cal, Holds 20 Rds, .425" Thick $12.6 Phillips Pellet Holder Holds .22 or .25 cal. pellets 20 pellet slots 2"x6.5" Velcro straps .425" pad thickness Wrap around gun or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive.

JBU Fake Airsoft Suppressor, 6.75", Aluminum, Incl. Barrel Extension $71.99 JBU (MSS) modular supressor system Aluminum alloy material 14mm counterclockwise thread 5-pc set Unique JBU serial number 6.75"x1.5" This high-quality modular suppressor system by JBU will enhance the look of your airsoft gun. The modular suppressor system is made of aluminum alloy material for extra durability. The 5-piece set includes a barrel cap, forward extender, base extender, flash hider & adapter. Does not suppress the sound/noise of your gun. For airsoft use only.

Bulldog Biometric Fingerprint Pistol Vault, 14.5"x16.5"x8", Black $311.99 Bulldog biometric fingerprint pistol vault 14.5"x16.5"x8" (exterior dimensions) Over 25 user fingerprints can be registered/given access LED display indicates if fingerprint has been accepted Hidden cylinder key override Deluxe foam interior with egg-crate bottom pad protects your gun’s finish Steel construction 2.75" motorized steel locking bolts on door Low-voltage alarm External backup battery box for emergency use Durable powder coated black matte finish The ultimate in protection of your valuables. Store guns, bonds, cash, jewelry, important papers and more in the Bulldog biometric fingerprint pistol vault. Protect your investment!

UTG Performance Upgrade Kit for Type 96 Spring Airsoft Sniper Rifle $35.94 Performance Upgrade Kit for UTG Sport S368 Shadow Ops Airsoft Sniper Rifle 20% increase in accuracy, velocity & performance! Includes upgraded spring, metal piston & metal spring guide with torque-absorbing ball-bearing set Easy installation

UTG 314 Sniper Handguard Rail Mount & Top Rail Mount $11.98 - 2 piece weaver rail mount set for UHC Super 9 Rifle (UA-314)- 1x 140mm Scope Rail mouted on top of receiver- 1x 110mm Handguard mount- Complete with swivel stud, screws and mounting tools- Will only fit on super 9 we sell.

Shooting Chrony F-1 Chronograph, Green $101.99 Shooting Chrony chronographs measure the velocity of almost any projectile, including pellets, steel BBs, plastic and metal airsoft BBs, bullets, shotgun pellets and slugs, arrows, bolts, darts, paintballs and just about any other projectile that fits through the skyscreens (which are the upright structures in the image). Shooting Chrony chronographs measure speed (feet per second and meters per second) from 30 fps to 7,000 fps with more than 99.5% accuracy. F-1 CHRONY – The very first model and still the most popular. Provides numbered shots and velocities plus high, low and average velocities of the string. All Chrony models are powered by a single 9V battery and can be easily attached to a 1/4"-20 tpi camera tripod for fast, easy set up. The Chrony is simple to use, just unfold the box, set the sky screens in place with the diffusers, turn on the switch and start shooting.

Winchester 6pc Kitchen Cutlery and Camping Knives with Case $25.5 Here is an opportunity to obtain some beautiful Winchester, American-made knives for camping or for your kitchen. Includes all the knives you need for your next outing or picnic. Set comes complete with 8" carving knife 8" chef’s knife Boning knife Utility knife 3" paring knife 12" cutting board All pieces are stored in a heavy-duty embroidered nylon case.

UTG Handguard, Weaver/Picatinny Rail, 3 ct $15.59 UTG handguard Weaver/Picatinny rail 3 ct Attach lasers, flashlights and other accessories to your favorite airgun, airsoft gun or firearm with this UTG handguard. This set contains 3 Weaver/Picatinny rails with mounting hardware. Simply use the included Allen wrench to attach the handguard to your gun for added versatility for any shooting discipline!

Birchwood Casey Gallery Resetting Airgun Target $23.99 Gallery Resetting Airgun Target Use .177 lead pellets only Use with 500 to 1000 fps velocity guns only Hit 4 hanging targets & then the center target to reset them Easy to set up…no tools required Solid steel targets with twist-designed paddles have a lifetime guarantee against breakage 2" dia. targets 18"Hx16"W Includes stick-on fluorescent target faces

Walther PS 55 Dot Sight, Red Duplex Reticle, 7 Brightness Settings, 1/4 MOA, Integral Weaver Mount $91.14 Walther PS 55 dot sight 30mm objective lens Red duplex reticle 7 brightness settings Integral Weaver mount Parallax set at 10 meters Windage & elevation adjustments 1/4 MOA Uses 1 AAA battery .67 lbs. 5.25" long Includes integral sunshade, coated lenses & lens caps

Hawke Sport Optics 2-Pc Adapter, 3/8" to Weaver Rail $29.99 Hawke Sport Optics 2-pc adapter 3/8" to Weaver rail* Includes 2 rails and a hex wrench Black *3/8" is approximately 9.5mm, but this adapter has enough room in it to accommodate up to 11mm. If you need to convert your air gun’s 3/8" or 11mm dovetail to a Weaver, this 2-piece set will do it and offer a firm, secure foundation for your optics.

Crosman B272 4-Pc Intermount, 3/8" Dovetail $17.94 Attaches to the barrel & provides a 3/8" dovetail Includes 1 set, which is 2 bases (each base has 2 sides that are screwed together) Black matte finish Fits current production Benjamin & Sheridan airguns Mounts so far forward that you’ll have to use a pistol scope to get the right eye relief. Do not grab any part of the scope when pumping your gun!

Radians Pro-Amp Electronic Earmuffs, Impulse Sound Protection, Hearing Amplification, NRR 23 $77.99 Radians Pro-Amp earmuffs NRR 23 rating Meets or exceeds ANSI S3.19-1974 standards 2 high-frequency, forward-facing microphones Independent volume controls for each muff Hearing protection for impulse sounds Compresses harmful noise to below 85dB Sound amplification to clearly hear conversation Adjustable CoolMax headband wicks away moisture Collapses for easy storage Includes 6 AAA batteries (3 for each muff) & a set of replacement microphone covers Approx. 280 hrs of battery life

Daisy Shatterblast Six Shooter Target System, .22 Caliber Max $11.94 Extra fun for ShatterBlast target shooters! Shoot one target in the SixShooter and another drops into place for fast shooting action! Holds six target disks. Set includes 12, 2" ShatterBlast target disks. Also includes 2 target stakes! (.22 caliber max) Buy more target disks here!

Gamo Red Laser Sight, Weaver Ring $42.6 3R Class red laser 3-5mW output 635nm wave length 0 to 2.0mm focus range 10mm beam size at aperture 30mm beam size at nearest focus 11.3mm dot size at 10 yds 50 yds visibility/indoor light 100 yds visibility/outdoor night Black matte finish 5.82 oz. 4.53" long 1.26" high Incl. Weaver ring, two 1.5-volt LR44 batteries, hex wrench set, momentary pressure switch & instruction manual

American Whitetail FPS 300 Compression Archery Target, 24"x24"x14" $55.19 FPS 300 compression archery target 24"x24"x14" 3 bullseyes on one side, whitetail vitals on other side 6.5-oz synthetic bag Ballistic filling slows arrow by compressing & absorbing energy Easy 2-finger arrow removal When bag is shot out, get a new bag & transfer the filling from the old bag! Ideal for daily practice with a 20-lb. recurve or a 3D set up to 300 fps

American Whitetail FPS 300 Compression Archery Target, 30"x30"x20" $143.99 FPS 300 compression archery target 30"x30"x20" 9 bullseyes on one size, whitetail vitals on other side 6.5-oz synthetic bag Ballistic filling slows arrow by compressing & absorbing energy Easy 2-finger arrow removal When bag is shot out, get a new bag & transfer the filling from the old bag! Ideal for daily practice with a 20-lb. recurve or a 3D set up to 300 fps Free ground shipping (to the continental U.S.).

Front Sight Inserts, Fits Weihrauch & Beeman HW Air Rifles, .575" OD $35.99 Front sight inserts Fits Weihrauch & Beeman HW air rifles Set of 5 inserts .575" outside diameter (OD) Select an insert for any distance & lighting condition. These front sight inserts come in packs of 5 and fit Beeman HW and Weihrauch air rifles. Never let a lost insert spoil your shooting again!

Gamo Laser and Light with 1" Scope Mount $47.99 Laser specs: 3R Class 5mW output 11.3mm dot size at 10 yds Visible up to 50 yds/indoor light Visible up to 100 yds/outdoor night 1.73 oz. 2.95" long .91" high Flashlight specs: 80 lumens 1.94 oz. 2.76" long 1.26" high Includes: 1" scope mount Two 1.5-volt LR44 batteries Hex wrench set Momentary pressure switch Instruction manual

LaserLyte Laser Bore Sighter, .22 – .50 caliber $71.99 By projecting a laser from the center of the axis of the barrel of your airgun or firearm, the LaserLyte Laser Bore Sighter allows you to instantly and accurately set your sights or scope. The easy-to-use system will fit all .22 – .50 caliber rifles and pistols. Scope and sight alignment have never been easier or more accurate! No more wasted time! No more wasted ammo! Do not use on guns that have muzzlebrakes, silencers, fake silencers, shrouds or noise dampeners.

Shooting Chrony Alpha Chronograph, Red $119.94 Shooting Chrony chronographs measure the velocity of almost any projectile, including pellets, steel BBs, plastic and metal airsoft BBs, bullets, shotgun pellets and slugs, arrows, bolts, darts, paintballs and just about any other projectile that fits through the skyscreens (which are the upright structures in the image). Shooting Chrony chronographs measure speed (feet per second and meters per second) from 30 fps to 7,000 fps with more than 99.5% accuracy. Now you can test your airgun’s velocity yourself! All Chrony models are powered by a single 9V battery and can be easily attached to a 1/4"-20 tpi camera tripod for fast, easy set up. The Chrony is simple to use, just unfold the box, set the sky screens in place with the diffusers, turn on the switch and start shooting. Gives numbered shot velocities Velocity stays on display until you shoot again ONE String, from 2 to 32 shot memory (Numbered) Measures High, Low and Average Velocities, Extreme Spread and Standard Deviations. Retrieval of individual shot velocity measurements Delete individual shots from memory (with automatic adjustment of Statistics)

Gamo Plinking Can & Bullseye Target $23.94 Plinking can & bullseye target For .177-caliber lead pellets only up to 1000 fps…do not use steel BBs Sturdy frame suspends 3 cans of different sizes (Gamo logo on each can) Powder-coated metal frame resists corrosion Bullseye target attached to side of target frame Easy set up & take-down Action targets are fun ways to see where your shot hit without going down range to see your target. For .177-caliber pellet guns shooting up to 1000 fps. Do not use steel BBs.

Shooting Chrony Beta Chronograph, Blue $133.14 Shooting Chrony chronographs measure the velocity of almost any projectile, including pellets, steel BBs, plastic and metal airsoft BBs, bullets, shotgun pellets and slugs, arrows, bolts, darts, paintballs and just about any other projectile that fits through the skyscreens (which are the upright structures in the image). Shooting Chrony chronographs measure speed (feet per second and meters per second) from 30 fps to 7,000 fps with more than 99.5% accuracy. Now you can test your airgun’s velocity yourself! All Chrony models are powered by a single 9V battery and can be easily attached to a 1/4"-20 tpi camera tripod for fast, easy set up. The Chrony is simple to use, just unfold the box, set the sky screens in place with the diffusers, turn on the switch and start shooting. 60-shot memory (divided into 6 numbered strings from 2 to 10 shot each, with one set of statistics for each string) Can be switched off, taken home and switched on for reviewing, information retrieval or, (together) with optional IBM Interface) downloading onto your computer; Moves instantly from string to string, interrupts shooting on any string without memory loss, each string delivers its own statistics, etc Forget Button to clear individual string-memory instantly Change string size Delete individual shots, or all data from memory

BKL 1-Pc Adjustable Scope Mount, 1" Rings, 3/8" Dovetail, Black $79.8 1-pc scope mount 3/8" dovetail Low profile 1" rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8" side rails for mounting other accessories 2.5" of clamping length 4" overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz. 6 base screws Matte black Includes 3 hex wrenches Got barrel droop? This new mount will help you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails offer more space to add a laser and a flashlight to augment a scope.

BKL 1-Pc Adjustable Scope Mount, 30mm Rings, 3/8" Dovetail, Black $79.8 1-pc scope mount 3/8" dovetail Low profile 30mm rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8" side rails for mounting other accessories 2.5" of clamping length 4" overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz. 6 base screws Matte black Includes 3 hex wrenches Got barrel droop? This BKL Tech mount lets you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails give you room to mount a laser and flashlight.

Winchester Portable Campers Kit $79.14 This is the only kit you will need for your next camping trip. A complete assortment of cooking utensils, along with four sets of tableware. All pieces are manufactured using 400-grade stainless steel, and the blades are hand honed to a razor’s edge. All pieces fit in a heavy-duty nylon embroidered bag for easy carrying or storage. Set comes complete with Two interchangeable black rubber locking handles Interchangeable boning blade Large chef’s blade Serrated utility blade Large serving/stir spoon Turning/carving fork Spatula/flipper Flatware service for four including four spoons, forks and serrated knives Acrylic cutting board All pieces are stored in a heavy-duty embroidered nylon case.

Quick-Detach Flashlight Color Lenses, 34mm, 5 Lenses $9.56 Flashlight color lenses 5 translucent colors (see specs below) Quick-detach Easy to install & remove Lenses snap on the 34mm dia. tube cap of your flashlight Plastic lenses & collar Heat levels vary in different lights. To avoid damage and distortion of filters, do NOT use filter lens caps on lights continuously. Lens uses: Ruby: preserves night vision Amber: cuts through smoke Emerald: for low-light conditions Sapphire: for tracing blood trails Clear: improves light beam focus Keep a set of these with every 34mm flashlight. In the car, you can use the ruby one to view maps at night without compromising your night vision. The sapphire color is great for tracking game that runs after being shot. The uses are endless!

Quick-Detach Flashlight Color Lenses, 42mm, 5 Lenses $9.56 Flashlight color lenses 5 translucent colors (see specs below) Quick-detach Easy to install & remove Lenses snap on the 42mm dia. tube cap of your flashlight Plastic lenses & collar Heat levels vary in different lights. To avoid damage and distortion of filters, do NOT use filter lens caps on lights continuously. Lens uses: Ruby: preserves night vision Amber: cuts through smoke Emerald: for low-light conditions Sapphire: for tracing blood trails Clear: improves light beam focus Keep a set of these with every 42mm flashlight. In the car, you can use the ruby one to view maps at night without compromising your night vision. The sapphire color is great for tracking game that runs after being shot. The uses are endless!

BSA AR 2-7×32 Rifle Scope $95.94 Variable magnification 2 to 7 power. BSA Air Rifle scope with Nitrogen filled chambers, machined aluminum construction, waterproof, shockproof and fogproof! Tube is 1" diameter, aluminum construction, dual braced lenses, adjustable objective lens can be set parallax-free down to 7.5 yards. These scopes are built to handle the unique reverse recoil of today’s magnum spring power air rifle. They all have adjustable objectives that focus down to 10 yards. All AR models have target style turrets with finger adjustable 1/4MOA clicks for windage and elevation. Specifications: Magnification: 2x-7x Objective: 32mm Field of view: 36.2-11.5ft @ 100 yds Eye relief: 3" Tube diameter: 1" Length: 12" Weight: 15.9 oz Finish: matte black Reticle: duplex Adj size: 1/4 MOA @ 100 yds

BSA Stealth Flashlight and Red Laser, 2 Mounts $83.99 The brilliant beam of the newly designed Stealth Tactical laser sight will allow you to find your target faster and more accurately than ever before, while the flashlight illuminates your target in low light or no light. Laser specs: 3R red laser 5 MOA 3-5mw output power 635nm wave length Uses 3V battery 18.9mm tube diameter 11.3mm dot at 10 yds 50 yds focus range Windage & elevation adjustments Visible 50 yds in daylight, 100 yds at night Flashlight specs: Uses 6v battery 5 MOA at 6.25 yds Other specs: Black matte finish Incl. 2 momentary pressure switches, combination 3/8" & Weaver mount, mount for a 1" or 30mm scope tube, 3 CR123A batteries, hex wrench set & instruction manual

BSA Varmint Hunter Precision Laser Sight & Light $47.99 Fast and very simple way to mount both a bright target illuminating light plus a fast aiming red laser to almost any scope with a 1" diameter body tube. Now you can illuminate your target under low light or zero light conditions while simultaneously directing a laser beam that will denote point of pellet strike. Easily mounts onto any 1" rifle scope with up to a 50mm diameter objective lens. Works for all small caliber rifles and all air rifles up to 1000 fps. Kit includes mounting bracket; instruction manual; hex wrench set, 3V. battery for flashlight & (3) 1.5V LR44 batteries for laser sight; remote pressure- sensitive switch and manual push button switch for both laser and flash light. Aluminum mounting bracket, laser and light bodies, black anodized finish.

Shooting Chrony Alpha Master Chronograph, Red $143.99 Shooting Chrony chronographs measure the velocity of almost any projectile, including pellets, steel BBs, plastic and metal airsoft BBs, bullets, shotgun pellets and slugs, arrows, bolts, darts, paintballs and just about any other projectile that fits through the skyscreens (which are the upright structures in the image). Shooting Chrony chronographs measure speed (feet per second and meters per second) from 30 fps to 7,000 fps with more than 99.5% accuracy. MASTER CHRONY MODELS have the same features as their respective SHOOTING CHRONY MODELS plus: Remote Control with close-up read-out and 18 ft cord. Now you can test your airgun’s velocity yourself! All Chrony models are powered by a single 9V battery and can be easily attached to a 1/4"-20 tpi camera tripod for fast, easy set up. The Chrony is simple to use, just unfold the box, set the sky screens in place with the diffusers, turn on the switch and start shooting. Gives numbered shot velocities Velocity stays on display until you shoot again ONE String, from 2 to 32 shot memory (Numbered) Measures High, Low and Average Velocities, Extreme Spread and Standard Deviations. Retrieval of individual shot velocity measurements Delete individual shots from memory (with automatic adjustment of Statistics)

UTG Drooper Scope Rail, 11mm-to-Weaver Adapter, Compensates for Droop & Stops Scope Shift $22.74 UTG DNT06 scope mount base Attaches to rifle’s 11mm scope rail Fits any rifle with an 11mm scope base…either dovetail grooves or a raised rail Decreases barrel droop with 10" upward compensation at 30 yds Stops scope shift–forever! Scope base provides a secure foundation for Weaver/Picatinny mounts 4 hex screws firmly attach base to your Diana rifle Dual scope-stop holes to stop movement 0.68" saddle height 0.78" total height 1" wide 4.72" long 11 slots to accommodate various eye relief adjustments 3.8 oz. Aircraft-grade aluminum Includes 2 hex wrenches, hex screw and set screw Barrel droop is a common issue in some air guns, but it can make it difficult to use a scope. To get the most accuracy from your air rifle, mount a scope, but don’t put it directly on the airgun’s original rail. Instead, mount this great adapter, which offers 10" of upward compensation (at 30 yds.), and then mount your scope. You’ll wonder how you ever got along without it!

Shooting Chrony USB to RS232 Serial Adapter with detachable USB cable $38.39 Serial Communication Parameters Detachable 10cm USB cable RxD, TxD LEDs for monitoring port status & easy diagnostics COM Port Number can be changed to COM1 to COM4 to support HyperTerminal, or any other COM port number required Industry Standard FTDI chip set & drivers for maximum compatibility Supports Windows Vista, XP, 2003, 2000, ME, 98, Linux, MAC-OS8, 9,X Full RS-232 modem control signals RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND Powered by USB port. No external power adapter required Attractive translucent plastic design Serial port speed of up to 230K bps Adds one RS-232 serial port by connecting to USB port Installed as standard Windows COM port FIFO: 128 byte transmit buffer 384 byte receive buffer Works with USB 1.1 & 2.0 host port One DB9 male connector One Mini-CD Driver Software The USB Serial Adapter is designed to make serial port expansion quick and simple. Connecting to a USB port on your computer or USB hub, the USB Serial Adapter instantly adds serial communication port to your system. By taking advantage of the USB bus, the USB Serial Adapter make it easier than ever to add serial port and serial device to your system with easy plug-and-play and hot plug feature. Adapting the new technology, the serial port expansion now takes the new bus with easy and convenient connectivity. Plugging the USB Serial Adapter to the USB port, the adapter automatically detected and installed. There are no IRQ & COM port conflicts, since the port doesn�t require any additional IRQ, DMA, memory as resources on the system. The RS-232 port function as native windows COM port, and it is compatible with Windows serial communication applications. Each port is individually configurable.