Do you live in a 1 or 2 bedrooms? If so, the space is tight, right? Even in a condo or small house, space can be very limited, but this does not mean you have to do without essential items such as home safes or boxes of weapons that can protect your valuables from theft, fire and accidental shootings!

Why do you need a house or a gun safe

safe home environment in all sizes and shapes, but most of them offer enough space to store their passports, birth certificates, banking information, jewelry, cash, a Hand Gun or two, and other essential items. If space is insufficient, then you should try a wall vault, micro or mini laptop safe:

• Wall safes are often very well placed shelves, interior lighting options and plated thick steel doors. But the best part of these babies is that you can installed on almost any wall or any wall recess without taking up space. In addition, most wall safes are designed to combine what they are less noticeable.
• Micro vaults come in a variety of small sizes, depending on your needs and can be easily stored under your bed in a box the dresser, or in your car. They are usually larger than wall safe, but again this may vary. These days, the domes offer micro recognition biometric fingerprint security technology that uses a new weapon to identify fingerprints as you type in the code set.
• mini laptop safes are great because they are portable and mini. Want something like this, if you travel a lot and prefer to keep their valuables in hand with you (eg in the car, RV or hotel room). Most laptops come safes with safety cables that you can secure your valuables easily.

Other key features

Start href = "http://www.cannonsafe.com" safe gun> come with all type of security features and so when shopping around for one find out their needs. Fireproof security options can be a very good thing if your house or office suddenly goes up in flames. Hopefully this will never happen, but it is good to know that your valuables can be protected even in a situation like this.

One feature you want no matter what is a safe that is made of heavy gauge steel. If you buy one that is not your safe can be opened with simple tools like a hammer. This can give access for all including children, horns, and curious teens. Also, check out the manufacturer and ensure that they have a reputation defective equipment.

Shannon Egan

S-19002 Mini Gauge Rake

Air Arms MPR Air Tank, Built-in Gauge $171.52 MPR air tank Built-in air pressure gauge (manometer)

AirForce Scuba Refill Clamp with Gauge $78.6 Scuba yoke fill station 1/4" AirForce tank adapter Fits scuba tank with standard k-valve 1" diameter micro-gauge reads from 1-5,000 psi across one-third of the gauge face Product may not look exactly like the one shown. Universal! Fits long- & short-necked scuba tanks!

Air Venturi Inline Air Pressure Gauge, 0 to 4500 psi $55.19 Inline air pressure gauge Measures up to 4500 psi Female quick-disconnect Male fitting If you use high-pressure fill devices for your precharged pneumatic guns and don’t have a pressure gauge on your fill device, this will do the job. The inline air pressure gauge fits the Air Venturi carbon fiber tank, AV-4500HPT.

Air Venturi Scuba Tank Adapter & Hose Assembly, Female Connector, Gauge $93.54 Scuba tank adapter Includes hose with female connector Fits both tall- and short-necked scuba tanks K-valve only (does not fit DIN valves Includes gauge Connect your scuba tank to your PCP air rifles and air pistols and fill ‘er up!

Intellect 8.4v 1600mAh NiMH Battery with Mini Tamiya connector $27.54 8.4v Nimh 1600mah airsoft battery Mini battery with large capacity Rechargeable high-drain Mini tamiya connector 30 amp hour discharge rate 4.25"x1.38"x.75"

Intellect 9.6V 1200mAh NiMh Intellect Battery with mini male plug $28.74 Intellect 9.6 V 1200mAh Ni-MH battery Mini plug Two batteries 1200mah capacity Mini-tamiya female plug type 2/3A cell size 8 cells NiMh 4.50"x.75"

Aftermath Mini Steyr Mini Submachine Gun, Clear $34.74 Airsoft gun

Intellect 9.6v 2000mAh NiMH Battery with Mini Tamiya connector $29.94 Intellect 9.6 Volt 2000 Mah rechargeable battery For AEGs NiHM No memory effect with mini tamiya connector 4"x1.12"x.62"

Mini Uzi SMG $27.54 Electronic Super Soft

TSD 9 volt DC 500mAh battery charger with Mini male plug $11.94 9 volt DC 500mAh Battery charger with Mini Kyosho male plug. Input 120v AC / Output 9v DC. Perfect for charging your 6-8 cell Nicad & NiMH Battery packs!

Benjamin Carbon Fiber Tank, 54 cu ft, Gauge, Hose w/Female Quick-Disconnect $719.99 Benjamin carbon fiber tank 54 cu-ft capacity 4,500 psi max pressure 38" long 12" microbore hose with female quick-disconnect Built-in air pressure gauge (manometer) Bleed valve Restricted-flow manifold for controlled, precise filling Lightweight, easier to transport than a metal scuba tanks 4.625"x37" 15 lbs. This monster carbon fiber air tank will keep you in air for days, weeks…and probably months! Fill all your precharged pneumatic (PCP) air pistols and air rifles and shoot day and night. Depending on the size of your gun’s onboard reservoir, you’ll get up to 80 fills with this big boy.

Benjamin Carbon Fiber Tank, 90 cu in, Gauge, Hose w/Female Quick-Disconnect $479.99 Benjamin carbon fiber tank 90 cu in capacity 4,500 psi max pressure 15" long 12" microbore hose with female quick-disconnect Built-in air pressure gauge (manometer) Bleed valve Restricted-flow manifold for controlled, precise filling Lightweight, easier to transport than a metal scuba tank 4.625"x14.625" 4.6 lbs. Have you resorted to carrying a steel or aluminum buddy bottle to refill your PCP air guns in the field? You’ll get even more refills from this carbon fiber tank since it’s 4,500 psi. Plus, it doesn’t weigh as much. Depending on the size of your airgun’s onboard reservoir, you could get up to 16 fills before you have to refill this tank.

Bravo 9.6V 1600 mAH Mini Crane AEG Battery $33.54 9.6V 1600mAh Ni-MH battery with with mini plug Two batteries 4 1/2 " long x 3/4" diameter For use with AEG airsoft guns Carrying a spare AEG battery is a smart way to prevent your AEG from running out of power at the wrong time.

8.4v 1200mAh NiMH Battery with Mini Tamiya connector for Tokyo Marui Electric Rifles $27.54 8.4 V Nimh 1200mah airsoft battery Mini tamiya connector Rechargeable battery Mini type battery Large capacity Innovative 1200mAh NiMH cell 30 amp hour discharge rate High-drain 4.25"x1.38"x.75"

Laserlyte Mini Laser Bore Sight, Fits .17 to .22 Cal Guns $71.99 Laserlyte laser bore sight Fits .17 to .22 caliber guns (air rifles, air pistols and firearms) Requires minimum 3" barrel (the owner’s manual incorrectly states that you need a min. 4" barrel) 6061 T6 aluminum 650nm laser module Class IIIA laser 5mw power output Includes three 393 batteries 500-yd range at night 1.5 hrs battery life (constant on) Do not use on guns that have muzzlebrakes, silencers, fake silencers, shrouds or noise dampeners. Stop wasting time and ammo manually sighting-in targets. A Laserlyte mini laser bore sight will get your shots within 3 to 4 inches of the bullseye within a couple shots at 100 yards. Air rifles, air pistols and rimfires with at least a 3-inch barrel can use the Laserlyte mini laser bore sight. The batteries come installed in the bore sight.

Intellect 9.6V 1600mAh Intellect Battery with with mini Tamiya connector $29.94 Capacity: 1600mah Voltage: 9.6v Plug Type: Small-Tamiya Female Cell Size: 2/3A Number of Cells: 8 Configuration: Mini Pack Cell Chemistry: NiMh 4.50"x1.38"x.75" For use on upgraded and/or modified AEG’s. Best if stored in temperature 35-70 Degree and keep away from sun light or heat.

Intellect 8.4 V 1600 mAh NiMh Battery, Mini Nunchuck Type $27.54 8.4 V 1600 mAh Nimh battery Mini nunchuck type Small-tamiya female connector 2/3A cell size Number of cells: 7 This 8.4 V NiMh AEG battery is great for modified or upgraded electric airsoft guns. Keep this battery away from sunlight and excessive heat for optimal performance in the battlefield. Pick one up for your next airsoft skirmish!

Swiss Arms 8.4V-9.6V NiMH Battery Charger with Mini male plug $20.34 8.4V-9.6V battery charger with mini male plug NiMH Delta Peak automatic stop full charge If you enjoy extended airsoft skirmish play you need a reliable battery charger. Charge your electric airsoft gun with the Tenergy 8.4V-9.6V battery charger. This charger has a Delta Peak automatic stop full charge system so you don’t have to worry about overcharging your gun’s battery. ATTENTION: Do NOT use this charger for batteries less than 600 mAh or greater than 2000 mAh. This unit charges Ni-MH batteries only.

Crosman Pulse M74DP $27.54 Dual Powered Mini Airsoft gun

Leapers Golden Image 4X32 Mini Size Range Estimating Mil-Dot Scope with Rings $35.94 4X32 mini size range estimating mil-dot scope Golden Image 4X32 mini with 5th Gen Body Mil-dot reticle, sapphire coating, classic elastic lens cover Specifications Magnification:4X Objective Dia.:32mm Field of View @100 yards: 28.0′ Eye Relief: 3.5" Exit Pupil: 6.0mm Click Value@100 yards: 1/4" Length: 7.7" Weight: 730g Battery: 10.8 oz Parallax Setting: @100yds Accushot Premium 1" Rings, Low, Weaver Mount, See-Thru. Specifications 1" rings Low profile See-thru mount Fits Weaver dovetail

G&G Armament UC-1650 7.2V-9.6V NiMH Battery Smart Charger, Mini Plug $23.94 Battery charger 120-240V input DC15V 800mA output 500 mA charging current Mini plug connector MAIN FEATURES 1. Controlled by smart 12 bit A/D Microprocessor and detected by -ΔV to increase rechargeable batteries lifespan. 2. 2 dual color LED indicators. 3. Automatic trickle charge after full charge. 5. Short circuit protection. OPERATION INSTRUCTION 1. Connect Ni-MH battery pack with the charger. Make sure the connection is correct between the poles (+) and (�). 2. Plug the charger into the household AC outlet. The red LED indicator will light up for proper charging. 3. After full charge, the LED indicator turns green and then trickle charge will be started to keep the power of batteries. 4. Please remove the charger from the AC outlet, and then remove the battery pack from the charger after full charge. For rechargeable Ni-MH battery pack only

Marines Airsoft MR01 Mini Electric Airsoft Gun $33.54 USMC dog tag, Full-auto

Stunt Studios Mini Broxa 5 Airsoft Gun $35.94 Full auto w/ glasses, BBs and target

Airsoft Battery Adapter Large to Mini Tamiya $4.79 Miniplug adapter allows a large plug charger connect to a small plug battery.

Aftermath Mini Steyr Airsoft Submachine Gun $34.74 Airsoft gun

Intellect 9.6 V 2300mAh Battery, NiMH, Mini-Tamiya Female Plug, Medium Crane Stock $34.79 Intellect 9.6 V 2300mAh battery NiMH Medium crane stock Mini-tamiya female plug 8 cells 1.2 V per cell 4/5A cell size Intellect batteries allow you to get optimal usage out of your AEG during extended skirmish play. Pick one up today!

Crosman Urban Mission Airsoft Kit $39.54 M74 Mini Machine Gun & P30 Spring Pistol

Intellect 10.8 V 2300mAh Battery, NiMH, Mini-Tamiya Female Plug, Medium Nunchuck $39.54 Intellect 10.8 V 2300mAh battery NiMH Medium nunchuck type Mini-tamiya female plug 9 cells 1.2 V per cell 4/5A cell size Don’t rely on an inferior AEG battery for extended airsoft skirmish play. This medium nunchuck battery by Intellect will keep your airsoft gun firing in the battlefield. The battery is compatible with ERA004 & EROA003 electric airsoft guns. Pick one up today! ATTENTION: Only use this battery in rifles that contain an M120 spring or higher. Damage to your gun’s gearbox can result from using this battery with a lower powered spring.

Intellect 10.8 V 2000mAh Battery, NiMH, Mini-Tamiya Female Plug, Nunchuck Type $35.94 Intellect 10.8 V 2000mAh battery NiMH Nunchuck type Mini-tamiya female plug 9 cells AA cell size Reliable AEG batteries allow you to get optimal usage and performance from your electric airsoft gun. This 10.8 V nunchuck type battery by Intellect is perfect for extended airsoft skirmishes. The battery is compatible with ERA004, ERICS13, EROA002, EROA003, SDGE0507R2, SDGE0501R2 electric airsoft guns. ATTENTION: Only use this battery in rifles that contain an M120 spring or higher. Damage to your gun’s gearbox can result from using this battery with a lower powered spring.

Smith & Wesson Magnum Series Mini Clear Lens Safety Glasses, Fits Kids $9.59 Fits kids! The Magnum Series safety glasses are ergonomically dimensioned for a 3 point fit, the ultimate in comfort. Reduced size for smaller adults and youth. Comes in a Black Frame with Clear Lens. Exceeds ANSI Z87.1 safety standards Provides maximum UV protection Ergonomic nose pad with self-adjusting rubber fingers Built-in hinge stops Polycarbonate safety glasses protect your eyes from impact, but the glasses deteriorate due to scratches, light, etc., and should be replaced after 2 years.

Intellect 9.6V 1600mAh Butterfly Type Battery $29.94 Intellect 9.6 V 1600mAh Ni-MH battery Mini plug Two batteries 4.50"x.75"

Intellect 9.6V 2000mAh Stagger Butterfly Battery $29.94 Capacity: 2000mah Voltage: 9.6 V Plug Type: Mini-Tamiya Female Cell Size: AA Number of Cells: 8 Cell Chemistry: NiMh 4"x.62"

Axsor PCP hand pump $238.8 3-stage hand pump Pumps to 3000 psi Integral air pressure gauge Built-in moisture trap Includes a hose ending in female 1/8" BSPP threads Buy optional adapters for pumping AirForce and other brands of PCP guns

Air Venturi Tank Adapter Assembly, 4500 psi, for High-Pressure SCBA Tanks $105 Tank adapter assembly Fits high-pressure scba (self-contained breathing apparatus) tank, including the Air Venturi carbon fiber tank 4500 psi Includes bleeder, hose and female quick-disconnect coupling Does not include a manometer (air pressure gauge) Fits the Air Venturi carbon fiber tank–AV-4500HPT [PY-A-350]. Inline manometer (air pressure gauge) sold separately–AV-00031 [PY-A-3865]. Suitable for connecting your high-pressure scba tank to a precharged pneumatic air rifle.

Spartan Imports 9.6V 1600 mAh NiMH AEG Stick Battery $29.94 9.6V 1600mah NiMH Rechargeable Battery Stick type with Mini Plug NOTE: NO DISCHARGING REQUIRED, just charge every time you play 9"x.75" This spare NiMH AEG stick battery lets you avoid running out of battery power at the wrong time in the battlefield.

Intellect 8.4v 1400mAh NiMH AK-S Stick Battery for Tokyo Marui AK47S, M5 PDW, UZI $26.94 Mini AK Type Stick Type Battery with Large Battery Capacity Innovative 1400mAh NiMH Cell Constructed High-Drain Type means high power output for your AEG Minimum 2000rds per each full charge at Full Auto shooting mode Ready to install on ALL Airsoft AEG that accommodate AK type battery (NO MODIFICATION NEEDED) RC Magazine recommended for the best choice battery Rechargeable Battery with Mini Plug NOTE: NO DISCHARGING REQUIRED, just charge every time you play 8"x.75"

Intellect 8.4v 1600mAh NiMH AK-S Stick Battery $27.54 Mini AK Type Stick Type Battery with Large Battery Capacity Innovative 1600mAh NiMH Cell Constructed High-Drain Type means high power output for your AEG Minimum 2600rds per each full charge at Full Auto shooting mode Ready to install on ALL Airsoft AEG that accommodate AK type battery (NO MODIFICATION NEEDED) RC Magazine recommended for the best choice battery Rechargeable Battery with Mini Plug NOTE: NO DISCHARGING REQUIRED, just charge every time you play 8"x.75"

AirForce Spin-Loc Standard Air Tank, Fits AirForce Talon & Talon SS Rifles $246.6 Spin-Loc standard air tank Connects to an AirForce Talon/Talon SS rifle without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

AirForce Spin-Loc Hi-Flo Air Tank, Fits .177 AirForce Condor Rifles $270 Spin-Loc Hi-Flo air tank Connects to .177-caliber* AirForce Condor rifles without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted** to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *The Condor’s Hi-Flo tank is caliber-specific. **To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

AirForce Spin-Loc Air Tank, Fits TalonP Air Pistols $188.1 Spin-Loc air tank Connects to an AirForce TalonP pistol without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings 6.125" long Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

AirForce Spin-Loc Micro-Meter Air Tank, Fits AirForce Sporting Rifles $246.6 Spin-Loc Micro-Meter air tank Connects to an AirForce Talon/Talon SS or Condor rifle without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings 10.875" long Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

AirForce PCP Hand Pump, for AirForce Rifles, Incl. Hose + Adapter, Pumps up to 3600 psi $234.9 Fits AirForce Condor, Talon & Talon SS rifles. 3-stage hand pump Does not heat up with constant use Requires less effort than other pumps Goes up to 3,600 psi Integral air pressure gauge Moisture filter Incl. 11" braided steel hose with female quick-disconnect coupling and AirForce fill adapter with male quick-disconnect coupling Every pump tested by the manufacturer

Benjamin Hand Pump, Fits Crosman & Benjamin PCP Guns $214.8 3-stage hand pump Made specifically for the Crosman/Benjamin PCP pistols & rifles (fits any brand of PCP gun with a male Foster quick-disconnect on its reservoir) Includes a female Foster quick-disconnect on the end of the pump hose Goes up to 3600 psi (although some of the guns listed above operate on a max pressure of 2000 or 3,000 psi) With other hoses, pump can be adapted to other PCPs Requires less effort than other pumps Integral air pressure gauge Moisture filter

Benjamin Scuba Yoke, DIN Valve $155.99 Benjamin scuba yoke Attaches to a scuba tank with a DIN valve Female quick-disconnect coupling on end of hose Includes air pressure gauge (manometer) Fits all Crosman & Benjamin PCP air rifles Fits other PCP guns that have a male quick-disconnect fitting No matter which Crosman or Benjamin precharged pneumatic air gun you own, this scuba yoke will connect your gun to a scuba tank with a DIN valve.

AirForce Scuba Tank Adapter K-valve, Steel Hose $102.6 AirForce Airguns scuba tank adapter K-valve Pressure gauge goes up to 3,000 psi Stainless steel mesh hose* Ends in a female quick-disconnect *While the hose is stainless steel mesh, it MAY also have a black plastic cover. Which one you get depends on what we have in stock.

AirForce Scuba Tank Adapter, DIN Connector, Steel Hose $102.6 AirForce Airguns scuba tank adapter DIN connector Pressure gauge goes up to 3,000 psi Stainless steel mesh hose* Ends in a female quick-disconnect *While the hose is stainless steel mesh, it MAY also have a black plastic cover. Which one you get depends on what we have in stock.

Replacement Air Reservoir, Fits Feinwerkbau P700 Air Rifles $387.46 Feinwerkbau replacement air reservoir Built-in manometer (air pressure gauge) 2900 psi max air pressure (200 bar) Fits all Feinwerkbau P700 PCP air rifles Instead of carrying a bulky fill tank or a hand pump, take along a spare air reservoir. Fill it up before your match and avoid lugging extra baggage. Same high-quality construction as the original tank that came with your FWB P700 air rifle.

Benjamin Scuba Yoke, K-Valve $137.94 Benjamin scuba yoke Attaches to a scuba tank with a K-valve Female quick-disconnect coupling on end of hose Includes air pressure gauge (manometer) Fits all Crosman & Benjamin PCP air rifles Fits other PCP guns that have a male quick-disconnect fitting No matter which Crosman or Benjamin precharged pneumatic air gun you own, this scuba yoke will connect your gun to a scuba tank with a K-valve.

National Target Air Rifle Target, 12 Bullseye, 100 ct $11.94 Air rifle target (12) 1.19" black bullseye 10.5"x12" 100 ct National Target paper targets are great for shot scoring in your backyard or your next shooting competition. These high-quality targets have 12 black bullseye and are made with heavy gauge paper for accurate scoring. Stock up on these excellent targets today!

Champion Heavy Duty Metal Trap $91.14 Made from heavy-gauge, sheet steel to stop and hold air gun pellets and standard velocity .22 long rifle rimfire lead bullets. Weighs over 20 lbs. so you know it is sturdy. Somewhat noisy but if you want the best trap going, this is the one to pick. Includes spring clip to hold paper targets. 11" (w) x 12"(h) x 8"(l). Use with lead projectiles only.

AirForce Spin-Loc Hi-Flo Air Tank, Fits .20, .22 & .25 AirForce Condor Rifles $270 Spin-Loc Hi-Flo air tank Connects to AirForce Condor rifles without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank Does not fit .177-caliber guns. Use ONLY for .20-, .22- and .25-caliber Condors. The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

Schrade Tough Tool, 20 Tools, Pouch $26.34 440C stainless steel 7" overall length opened 4.75" overall length closed 8.1 oz. Made in China You can access all the bits with the tool opened, closed or folded. Includes: Needlenose pliers Regular pliers Vise

Airforce Braided Steel Hose, Quick-Disconnect, Fits Older Airforce Refill Clamp & Hand Pump $36 Braided steel hose Quick-disconnect fitting Fits older Airforce refill clamp with gauge (U1012) & older AirForce hand pump (U1014) To fill Talon/Condor rifles, use a refill adapter with quick-disconnect nipple (U1013) to attach the hose’s quick-disconnect This braided steel hose will stand up to many years of use without compromising its integrity. Strong, flexible, reliable…and safe. Current AirForce high-pressure fill devices come with a hose. The older pumps and scuba yokes did not come with a hose. If you have one of the older units and need to replace your hose, this is the item to get.

Crosman 850/852 Pellet & BB Trap $29.94 Crosman 850 pellet & BB trap Indoor/outdoor trap Ballistic triple Safe-T-Curtain Heavy-gauge galvanized steel backstop Slows projectiles so they can be contained in the trap Ballistic curtain lasts for thousands of shots For steel BBs and .177 cal lead airgun pellets with a max muzzle velocity of 1200 fps Includes a replacement cardboard (to hang your paper target) 10"x9.5"x8" Ideal for use with these Crosman paper targets

Carbon Fiber Tank, 4500 psi, 88 cu ft $839.99 DOT-approved Carbon fiber filament wound over aluminum bladder 88 cu ft 4500 psi max pressure 11.3 lbs dry weight Includes: Hose with 1/8" BSPP threads on both ends Seal washer Hose has an inline gauge (eliminates use of a yoke) Air Venturi female quick-disconnect adapter with 1/8" BSPP male threads on one end This is not a scuba tank. It’s a carbon fiber tank, which is also called an scba tank, and has a high-pressure scba valve…like the one firefighters use on their scba tanks. Many dive shops do not have the ability to fill these tanks. In some towns, the fire department has a compressor that can fill a high-pressure carbon fiber tank, as firefighters use smaller scba tanks for breathing equipment during rescues. You might want to approach your local fire department and ask if they would be willing to fill your high-pressure carbon fiber/scba tank from their compressor. Another alternative is to contact a local paintball store, as paintballers use carbon fiber tanks to fill their markers. If the only alternative you have is to fill your high-pressure carbon fiber scba tank at a dive shop, a 1/8" BSPP male to DIN female adapter (our part # AA-Z2128-300) can temporarily replace the hose on the valve adapter so the dive shop can fill your tank.

Shooting Chrony USB to RS232 Serial Adapter with detachable USB cable $38.39 Serial Communication Parameters Detachable 10cm USB cable RxD, TxD LEDs for monitoring port status & easy diagnostics COM Port Number can be changed to COM1 to COM4 to support HyperTerminal, or any other COM port number required Industry Standard FTDI chip set & drivers for maximum compatibility Supports Windows Vista, XP, 2003, 2000, ME, 98, Linux, MAC-OS8, 9,X Full RS-232 modem control signals RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND Powered by USB port. No external power adapter required Attractive translucent plastic design Serial port speed of up to 230K bps Adds one RS-232 serial port by connecting to USB port Installed as standard Windows COM port FIFO: 128 byte transmit buffer 384 byte receive buffer Works with USB 1.1 & 2.0 host port One DB9 male connector One Mini-CD Driver Software The USB Serial Adapter is designed to make serial port expansion quick and simple. Connecting to a USB port on your computer or USB hub, the USB Serial Adapter instantly adds serial communication port to your system. By taking advantage of the USB bus, the USB Serial Adapter make it easier than ever to add serial port and serial device to your system with easy plug-and-play and hot plug feature. Adapting the new technology, the serial port expansion now takes the new bus with easy and convenient connectivity. Plugging the USB Serial Adapter to the USB port, the adapter automatically detected and installed. There are no IRQ & COM port conflicts, since the port doesn�t require any additional IRQ, DMA, memory as resources on the system. The RS-232 port function as native windows COM port, and it is compatible with Windows serial communication applications. Each port is individually configurable.