Veteran defender set to retire over 36 years ago, Duane Krueger has been an advocate for veterans of Anoka Countys.
FL Studio Guru – Dragging samples with a downbeat marker set

Magnum Reserch RAM Desert Eagle $269.99 Paintball / Rubberball Marker

Walther RAM P99 Black $203.99 RAM = Real Action Marker

Walther RAM P99 Blue $203.99 RAM – Real Action Marker

RAM X50 Paintball Pistol $299.94 Marker Training Pistol

RAM X50 Paintball Pistol, LE Blue Slide $239.4 Marker Training Pistol

AirForce Talon/Condor Swivel Stud Set $24 Sling Swivel Stud set comes with quick detachable swivels and can be attached to either the top or bottom of the rifle using the sling swivel studs.

O-Ring Set – 0099-B Replacement O-rings, 4 $4.5 0099-B replacement O-rings (4) 0099-B O-Ring replacement set for BSA high pressure probes.

O-Ring Set – 0099-W Replacement O-rings, 4 $4.5 O-Ring replacement set for Evanix, FX, Logun and Raider high pressure probes

Air Venturi PCP Scuba Charging Set $95.99 Scuba charging set Fits k-valves Hose ends with 1/8 female BSPP No extra adapters needed if you use this for the following guns: Air Arms, Evanix, Sumatra, BAM & Sam Yang Big Bore 909 (the adapter included with these guns attaches to this set) Also fits these guns, but you’ll need to get the adapters indicated: Marauder, Discovery & Challenger rifles: you’ll need Quickadap1EM1B (female quick-disconnect adapter) Dragon Slayer, Fire 202 & 707 Ultra rifles (which come with 7/16 probes): you’ll need PYadapterEJ

GrovTec Push-Button Swivel Set, 1" Loops, Black Oxide $19.19 Push-button swivel set 1" loops Black oxide finish Flush mounting system No protruding swivel studs Forend & buttstock swivel bases are countersunk into stock & glued in place Easy installation, easy removal

B-Square Professional Gunsmith Screwdriver Set $34.74 The 32 piece set includes: 1 magnetized driver handle with no-slip grip, 11 gunsmith ground medium and fine blade slotted bits, 3 Phillips bits, 8 hex bits, 2 torx bits, 2 posi-drive bits, 1 long 3/32" hex bit, 1 long 5/32" fine slotted bit, 1 long #1 Phillips bit, 1-1/4" socket drive adapter and comes in a sturdy molded storage case with individual compartments for each item. Special gunsmith-ground bits are perfect for quick repairs in the field or on the bench for rifles, pistols, scopes, rings, bases as well as for hunting, camping and hundreds of household uses.

Crosman Airsource CO2 Paintball Adapter $8.39 Paintball adapter Fits 88-gram AirSource CO2 tanks More convenient than a refillable tank This paintball adapter is compatible with Crosman 88-gram AirSource CO2 tanks. Simply attach the adapter to the paintball marker before you attach it to the cylinder. For paintball use only.

RAM .43 Caliber Paintballs, 430 rds, red and orange $23.99 .43 cal. paintballs 430 rds Red and orange RAM paintballs are essential RAM marker ammunition for law enforcement & milsim training scenarios. Stock up on these high-quality .43 caliber paintballs for an enjoyable and highly realistic gaming experience on the battlefield. Top-quality paintball ammo increases accuracy.

G&G Knee Pads & Elbow Pads Set, Large, Desert Color $39.54 Knee pads & elbow pads set Desert color Large This G&G knee & elbow pad kit will protect you from unnecessary scrapes and bruises in the battlefield. The pads are camo colored and have a durable plastic shield for maximum protection. Pick one up for your next airsoft skirmish!

CenterPoint 1-Pc Off-Set Mount, 1" Rings, High, 3/8" Dovetail, 4 Screws/Cap $15.54 1" rings 1-pc off-set mount High profile Fits 3/8" dovetail 4 screws/ring cap 2 hex screws secure the base Attach a scope to your favorite airgun, airsoft gun or rimfire with this 1-pc off-set mount. The mount fits a 3/8" dovetail and has 2 hex screws on the base. The rings have 4 hex screws per cap that hold your scope solidly in place.

GrovTec Swivel Set, Wood Screws, Fits Bolt-Action Rifles, 1" Loops, Black Oxide $10.79 Swivel set for bolt-action rifles 1" loops Black oxide finish Includes 1/2" wood screw fore end swivel stud, 3/4" wood screw rear, spacers & 2 locking swivels

TSD JBU Metal Shim set for all gearbox $4.74 0.1mm x 6pcs 0.3mm x 6pcs 0.5mm x 6pcs

Walther, pre-filled, disposable, two 88 gram CO2 tanks $23.39 Walther’s 88g CO2 is the ideal power source for Walther Airguns and other air pistols and air rifles that shoot pellets, BBs, rubberballs or paintballs. Air pistols like the Walther P99 RAM (Real Action Marker) paintball gun and air rifles like the Beretta CX4 Storm and Hammerli 850 AirMagnum perform at their best when using Walther CO2. NOTE: CO2 can not be shipped by air services. We will only ship CO2 by regular ground delivery. We can not ship CO2 cylinders to Hawaii.

Walther RAM P99 Paintball Pistol Extra Magazine $21.59 The Walther P99 RAM (Real Action Marker) Magazine has a 9-shot capacity and holds either .43 caliber paintballs or .43 caliber rubberballs. Additional ammo magazines are handy for training or the ultimate in paintball reality. Have a couple of extras in your ammo belt for quick re-loading action. The perfect addition to your P99 paintball pistol. Don’t get caught with an empty clip. One Per Package.

AirForce Adaptive Target Sight Set, Fits Most 10-Meter 3-Position Rifles & All AirForce Guns $205.2 Adaptive target sight set (front & rear sights included) Fits most 10-meter 3-position rifles & All AirForce guns Front sight accepts standard European aperture inserts (not included) Both sights have large amount of vertical adjustment Rear sight fits 11mm airgun rail Rear sight has 1/8 MOA click adjustment knobs & can be reset to zero Rear sight can be removed from its mounting base & clamped into a 1" scope ring Made in America

GrovTec Swivel Set, Wood Screws, Fits Some Lever-Action & Tube-Mag Rifles & Carbines, 1" Loops, Black Oxide $15.59 Swivel set for lever-action, tube-mag rifles & carbines 1" loops Black oxide finish 2-piece band fits mag tubes .630" to .675" diameter, band barrels of some Browning & Ruger models, .410 shotguns Includes 3/4" rear wood screw swivel stud, Allen wrench & 1 pair of locking swivels

O-Ring Set – 909 Replacement O-rings, 4 $5.04 Big Bore 909 and Shin Sung probe O-ring replacement. Please be aware that if your Big Bore 909 or Shin Sung rifle was made in or before 2005 you will need this (thicker) replacement O-ring. Dimensions: OD -.315" ID – .112" H – .103" 4 Pack (enough for two probes)

UTG Model 36 Handguard Picatinny Rail Set, Short, 2ct $11.39 Picatinny rails 7 numbered slots 2 screw holes per rail 3-7/8" long 3-375" between screw holes Aluminum 2.3 oz. Incl. 2 rails, 5 hex screws & Allen wrench Attach these Picatinny rails and add a scope, dot sight or laser to your airsoft gun or firearm. Hex screws make it easy to attach and remove.

UHC Revolver 131, 132, 133 BB Shell Set $11.04 Includes 8 shells to load BBs into

UHC Revolver 937, 938, 941 BB Shell Set $7.44 Includes 8 shells to load BBs into

AirForce 1/8" and 1/4" BSPP Refill Adapter set $27.9 For AirForce air rifles. Fits the FX/Logun three stage pump.

HFC Metal Shells for G132 & 133 Gas Revolvers $15.54 Spare Shells for HFC HG-132 & HFC HG-133 Gas Revolvers, 6pc to a set.

Crosman Precision Sight Set, Globe Front sight w/Insert, Rear Diopter Sight $143.94 Adjustable diopter rear sight and globe front sight with one insert (shown).

Franzen Security Gun Combination Trigger Lock, Universal $13.19 Combination trigger lock Works on most firearms, airguns & airsoft guns Universal fit Ergonomic design facilitates rapid installation No keys to lose; set your own personal combination Complies with applicable laws Set multiple combination trigger locks with same combination The lock is set to to open at "000" Instructions for setting the combination: Put the lock in the open position by twisting the face of the lock (the half that displays the combination). Locate the set pin on the side of the lock. Using a ballpoint pen, push in the set pin and hold. Turn the dials one at a time to set your own code. Release the set pin after your code is set. Pull apart the lock halves and place the half with the combination over the triggerguard. Match the other half on the opposite side of the triggerguard and fit the shafts together. Press the lock together until it’s unmovable. Remove by dialing the combination, twisting the face of the lock and pulling it apart.

BKL 3/8" or 11mm Dovetail Riser, 1" Long, Matte Black $33.6 3/8 or 11mm dovetail riser .765" high Same length as BKL mounts 263 & 301 Packaged as a set Matte black Formerly BKL-266

BKL 3/8" or 11mm Dovetail Riser, 1" Long, Silver $33.6 3/8 or 11mm dovetail riser .765" high Same length as BKL mounts 263 & 301 Packaged as a set Silver Formerly BKL-266

Spare Shells for UHC UG134, UG135, UA933 & UA934 Revolvers $8.34 Spare Shells for UHC Gas & Spring Revolvers, 8pc to a set. Not compatible with UHC Spring Revolver Models UA937, UA938 & UA941. Use for UG134 & UG135 Gas and UA933 & UA934 Spring Revolvers.

Umarex Compensator, Fits Hammerli 850, Walther 1250 Dominator & Beretta CX4 Rifles $47.99 Rifle compensator Fits RWS 850 AirMagnum, Walther 1250 Dominator (do not use on .25 cal gun) and Beretta CX4 Storm Friction fit Set screw secures compensator to barrel

Crosman 459MT 2-Pc Intermount, 3/8" Dovetail $12.54 Attaches to the barrel & provides a 3/8" dovetail Fits Crosman models 2240, 2250, 2260, 2289, 1322, 1377, 1740 & 1760 Includes 1 set, which is 2 intermounts

JBU Fake Airsoft Suppressor, 6.75", Aluminum, Incl. Barrel Extension $71.99 JBU (MSS) modular supressor system Aluminum alloy material 14mm counterclockwise thread 5-pc set Unique JBU serial number 6.75"x1.5" This high-quality modular suppressor system by JBU will enhance the look of your airsoft gun. The modular suppressor system is made of aluminum alloy material for extra durability. The 5-piece set includes a barrel cap, forward extender, base extender, flash hider & adapter. Does not suppress the sound/noise of your gun. For airsoft use only.

UTG Performance Upgrade Kit for Type 96 Spring Airsoft Sniper Rifle $35.94 Performance Upgrade Kit for UTG Sport S368 Shadow Ops Airsoft Sniper Rifle 20% increase in accuracy, velocity & performance! Includes upgraded spring, metal piston & metal spring guide with torque-absorbing ball-bearing set Easy installation

UTG 314 Sniper Handguard Rail Mount & Top Rail Mount $11.98 - 2 piece weaver rail mount set for UHC Super 9 Rifle (UA-314)- 1x 140mm Scope Rail mouted on top of receiver- 1x 110mm Handguard mount- Complete with swivel stud, screws and mounting tools- Will only fit on super 9 we sell.

Shooting Chrony F-1 Chronograph, Green $101.99 Shooting Chrony chronographs measure the velocity of almost any projectile, including pellets, steel BBs, plastic and metal airsoft BBs, bullets, shotgun pellets and slugs, arrows, bolts, darts, paintballs and just about any other projectile that fits through the skyscreens (which are the upright structures in the image). Shooting Chrony chronographs measure speed (feet per second and meters per second) from 30 fps to 7,000 fps with more than 99.5% accuracy. F-1 CHRONY – The very first model and still the most popular. Provides numbered shots and velocities plus high, low and average velocities of the string. All Chrony models are powered by a single 9V battery and can be easily attached to a 1/4"-20 tpi camera tripod for fast, easy set up. The Chrony is simple to use, just unfold the box, set the sky screens in place with the diffusers, turn on the switch and start shooting.

Winchester 6pc Kitchen Cutlery and Camping Knives with Case $25.5 Here is an opportunity to obtain some beautiful Winchester, American-made knives for camping or for your kitchen. Includes all the knives you need for your next outing or picnic. Set comes complete with 8" carving knife 8" chef’s knife Boning knife Utility knife 3" paring knife 12" cutting board All pieces are stored in a heavy-duty embroidered nylon case.

UTG Handguard, Weaver/Picatinny Rail, 3 ct $15.59 UTG handguard Weaver/Picatinny rail 3 ct Attach lasers, flashlights and other accessories to your favorite airgun, airsoft gun or firearm with this UTG handguard. This set contains 3 Weaver/Picatinny rails with mounting hardware. Simply use the included Allen wrench to attach the handguard to your gun for added versatility for any shooting discipline!

Birchwood Casey Gallery Resetting Airgun Target $23.99 Gallery Resetting Airgun Target Use .177 lead pellets only Use with 500 to 1000 fps velocity guns only Hit 4 hanging targets & then the center target to reset them Easy to set up…no tools required Solid steel targets with twist-designed paddles have a lifetime guarantee against breakage 2" dia. targets 18"Hx16"W Includes stick-on fluorescent target faces

Walther PS 55 Dot Sight, Red Duplex Reticle, 7 Brightness Settings, 1/4 MOA, Integral Weaver Mount $91.14 Walther PS 55 dot sight 30mm objective lens Red duplex reticle 7 brightness settings Integral Weaver mount Parallax set at 10 meters Windage & elevation adjustments 1/4 MOA Uses 1 AAA battery .67 lbs. 5.25" long Includes integral sunshade, coated lenses & lens caps

Hawke Sport Optics 2-Pc Adapter, 3/8" to Weaver Rail $29.99 Hawke Sport Optics 2-pc adapter 3/8" to Weaver rail* Includes 2 rails and a hex wrench Black *3/8" is approximately 9.5mm, but this adapter has enough room in it to accommodate up to 11mm. If you need to convert your air gun’s 3/8" or 11mm dovetail to a Weaver, this 2-piece set will do it and offer a firm, secure foundation for your optics.

Crosman B272 4-Pc Intermount, 3/8" Dovetail $17.94 Attaches to the barrel & provides a 3/8" dovetail Includes 1 set, which is 2 bases (each base has 2 sides that are screwed together) Black matte finish Fits current production Benjamin & Sheridan airguns Mounts so far forward that you’ll have to use a pistol scope to get the right eye relief. Do not grab any part of the scope when pumping your gun!

Radians Pro-Amp Electronic Earmuffs, Impulse Sound Protection, Hearing Amplification, NRR 23 $77.99 Radians Pro-Amp earmuffs NRR 23 rating Meets or exceeds ANSI S3.19-1974 standards 2 high-frequency, forward-facing microphones Independent volume controls for each muff Hearing protection for impulse sounds Compresses harmful noise to below 85dB Sound amplification to clearly hear conversation Adjustable CoolMax headband wicks away moisture Collapses for easy storage Includes 6 AAA batteries (3 for each muff) & a set of replacement microphone covers Approx. 280 hrs of battery life

Daisy Shatterblast Six Shooter Target System, .22 Caliber Max $11.94 Extra fun for ShatterBlast target shooters! Shoot one target in the SixShooter and another drops into place for fast shooting action! Holds six target disks. Set includes 12, 2" ShatterBlast target disks. Also includes 2 target stakes! (.22 caliber max) Buy more target disks here!

Gamo Red Laser Sight, Weaver Ring $42.6 3R Class red laser 3-5mW output 635nm wave length 0 to 2.0mm focus range 10mm beam size at aperture 30mm beam size at nearest focus 11.3mm dot size at 10 yds 50 yds visibility/indoor light 100 yds visibility/outdoor night Black matte finish 5.82 oz. 4.53" long 1.26" high Incl. Weaver ring, two 1.5-volt LR44 batteries, hex wrench set, momentary pressure switch & instruction manual

American Whitetail FPS 300 Compression Archery Target, 24"x24"x14" $55.19 FPS 300 compression archery target 24"x24"x14" 3 bullseyes on one side, whitetail vitals on other side 6.5-oz synthetic bag Ballistic filling slows arrow by compressing & absorbing energy Easy 2-finger arrow removal When bag is shot out, get a new bag & transfer the filling from the old bag! Ideal for daily practice with a 20-lb. recurve or a 3D set up to 300 fps

American Whitetail FPS 300 Compression Archery Target, 30"x30"x20" $143.99 FPS 300 compression archery target 30"x30"x20" 9 bullseyes on one size, whitetail vitals on other side 6.5-oz synthetic bag Ballistic filling slows arrow by compressing & absorbing energy Easy 2-finger arrow removal When bag is shot out, get a new bag & transfer the filling from the old bag! Ideal for daily practice with a 20-lb. recurve or a 3D set up to 300 fps Free ground shipping (to the continental U.S.).

Front Sight Inserts, Fits Weihrauch & Beeman HW Air Rifles, .575" OD $35.99 Front sight inserts Fits Weihrauch & Beeman HW air rifles Set of 5 inserts .575" outside diameter (OD) Select an insert for any distance & lighting condition. These front sight inserts come in packs of 5 and fit Beeman HW and Weihrauch air rifles. Never let a lost insert spoil your shooting again!

Gamo Laser and Light with 1" Scope Mount $47.99 Laser specs: 3R Class 5mW output 11.3mm dot size at 10 yds Visible up to 50 yds/indoor light Visible up to 100 yds/outdoor night 1.73 oz. 2.95" long .91" high Flashlight specs: 80 lumens 1.94 oz. 2.76" long 1.26" high Includes: 1" scope mount Two 1.5-volt LR44 batteries Hex wrench set Momentary pressure switch Instruction manual

LaserLyte Laser Bore Sighter, .22 – .50 caliber $71.99 By projecting a laser from the center of the axis of the barrel of your airgun or firearm, the LaserLyte Laser Bore Sighter allows you to instantly and accurately set your sights or scope. The easy-to-use system will fit all .22 – .50 caliber rifles and pistols. Scope and sight alignment have never been easier or more accurate! No more wasted time! No more wasted ammo! Do not use on guns that have muzzlebrakes, silencers, fake silencers, shrouds or noise dampeners.

Shooting Chrony Alpha Chronograph, Red $119.94 Shooting Chrony chronographs measure the velocity of almost any projectile, including pellets, steel BBs, plastic and metal airsoft BBs, bullets, shotgun pellets and slugs, arrows, bolts, darts, paintballs and just about any other projectile that fits through the skyscreens (which are the upright structures in the image). Shooting Chrony chronographs measure speed (feet per second and meters per second) from 30 fps to 7,000 fps with more than 99.5% accuracy. Now you can test your airgun’s velocity yourself! All Chrony models are powered by a single 9V battery and can be easily attached to a 1/4"-20 tpi camera tripod for fast, easy set up. The Chrony is simple to use, just unfold the box, set the sky screens in place with the diffusers, turn on the switch and start shooting. Gives numbered shot velocities Velocity stays on display until you shoot again ONE String, from 2 to 32 shot memory (Numbered) Measures High, Low and Average Velocities, Extreme Spread and Standard Deviations. Retrieval of individual shot velocity measurements Delete individual shots from memory (with automatic adjustment of Statistics)

Gamo Plinking Can & Bullseye Target $23.94 Plinking can & bullseye target For .177-caliber lead pellets only up to 1000 fps…do not use steel BBs Sturdy frame suspends 3 cans of different sizes (Gamo logo on each can) Powder-coated metal frame resists corrosion Bullseye target attached to side of target frame Easy set up & take-down Action targets are fun ways to see where your shot hit without going down range to see your target. For .177-caliber pellet guns shooting up to 1000 fps. Do not use steel BBs.

Shooting Chrony Beta Chronograph, Blue $133.14 Shooting Chrony chronographs measure the velocity of almost any projectile, including pellets, steel BBs, plastic and metal airsoft BBs, bullets, shotgun pellets and slugs, arrows, bolts, darts, paintballs and just about any other projectile that fits through the skyscreens (which are the upright structures in the image). Shooting Chrony chronographs measure speed (feet per second and meters per second) from 30 fps to 7,000 fps with more than 99.5% accuracy. Now you can test your airgun’s velocity yourself! All Chrony models are powered by a single 9V battery and can be easily attached to a 1/4"-20 tpi camera tripod for fast, easy set up. The Chrony is simple to use, just unfold the box, set the sky screens in place with the diffusers, turn on the switch and start shooting. 60-shot memory (divided into 6 numbered strings from 2 to 10 shot each, with one set of statistics for each string) Can be switched off, taken home and switched on for reviewing, information retrieval or, (together) with optional IBM Interface) downloading onto your computer; Moves instantly from string to string, interrupts shooting on any string without memory loss, each string delivers its own statistics, etc Forget Button to clear individual string-memory instantly Change string size Delete individual shots, or all data from memory

BKL 1-Pc Adjustable Scope Mount, 1" Rings, 3/8" Dovetail, Black $79.8 1-pc scope mount 3/8" dovetail Low profile 1" rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8" side rails for mounting other accessories 2.5" of clamping length 4" overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz. 6 base screws Matte black Includes 3 hex wrenches Got barrel droop? This new mount will help you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails offer more space to add a laser and a flashlight to augment a scope.

BKL 1-Pc Adjustable Scope Mount, 30mm Rings, 3/8" Dovetail, Black $79.8 1-pc scope mount 3/8" dovetail Low profile 30mm rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8" side rails for mounting other accessories 2.5" of clamping length 4" overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz. 6 base screws Matte black Includes 3 hex wrenches Got barrel droop? This BKL Tech mount lets you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails give you room to mount a laser and flashlight.

Winchester Portable Campers Kit $79.14 This is the only kit you will need for your next camping trip. A complete assortment of cooking utensils, along with four sets of tableware. All pieces are manufactured using 400-grade stainless steel, and the blades are hand honed to a razor’s edge. All pieces fit in a heavy-duty nylon embroidered bag for easy carrying or storage. Set comes complete with Two interchangeable black rubber locking handles Interchangeable boning blade Large chef’s blade Serrated utility blade Large serving/stir spoon Turning/carving fork Spatula/flipper Flatware service for four including four spoons, forks and serrated knives Acrylic cutting board All pieces are stored in a heavy-duty embroidered nylon case.

Quick-Detach Flashlight Color Lenses, 34mm, 5 Lenses $9.56 Flashlight color lenses 5 translucent colors (see specs below) Quick-detach Easy to install & remove Lenses snap on the 34mm dia. tube cap of your flashlight Plastic lenses & collar Heat levels vary in different lights. To avoid damage and distortion of filters, do NOT use filter lens caps on lights continuously. Lens uses: Ruby: preserves night vision Amber: cuts through smoke Emerald: for low-light conditions Sapphire: for tracing blood trails Clear: improves light beam focus Keep a set of these with every 34mm flashlight. In the car, you can use the ruby one to view maps at night without compromising your night vision. The sapphire color is great for tracking game that runs after being shot. The uses are endless!

Quick-Detach Flashlight Color Lenses, 42mm, 5 Lenses $9.56 Flashlight color lenses 5 translucent colors (see specs below) Quick-detach Easy to install & remove Lenses snap on the 42mm dia. tube cap of your flashlight Plastic lenses & collar Heat levels vary in different lights. To avoid damage and distortion of filters, do NOT use filter lens caps on lights continuously. Lens uses: Ruby: preserves night vision Amber: cuts through smoke Emerald: for low-light conditions Sapphire: for tracing blood trails Clear: improves light beam focus Keep a set of these with every 42mm flashlight. In the car, you can use the ruby one to view maps at night without compromising your night vision. The sapphire color is great for tracking game that runs after being shot. The uses are endless!

BSA AR 2-7×32 Rifle Scope $95.94 Variable magnification 2 to 7 power. BSA Air Rifle scope with Nitrogen filled chambers, machined aluminum construction, waterproof, shockproof and fogproof! Tube is 1" diameter, aluminum construction, dual braced lenses, adjustable objective lens can be set parallax-free down to 7.5 yards. These scopes are built to handle the unique reverse recoil of today’s magnum spring power air rifle. They all have adjustable objectives that focus down to 10 yards. All AR models have target style turrets with finger adjustable 1/4MOA clicks for windage and elevation. Specifications: Magnification: 2x-7x Objective: 32mm Field of view: 36.2-11.5ft @ 100 yds Eye relief: 3" Tube diameter: 1" Length: 12" Weight: 15.9 oz Finish: matte black Reticle: duplex Adj size: 1/4 MOA @ 100 yds

BSA Stealth Flashlight and Red Laser, 2 Mounts $83.99 The brilliant beam of the newly designed Stealth Tactical laser sight will allow you to find your target faster and more accurately than ever before, while the flashlight illuminates your target in low light or no light. Laser specs: 3R red laser 5 MOA 3-5mw output power 635nm wave length Uses 3V battery 18.9mm tube diameter 11.3mm dot at 10 yds 50 yds focus range Windage & elevation adjustments Visible 50 yds in daylight, 100 yds at night Flashlight specs: Uses 6v battery 5 MOA at 6.25 yds Other specs: Black matte finish Incl. 2 momentary pressure switches, combination 3/8" & Weaver mount, mount for a 1" or 30mm scope tube, 3 CR123A batteries, hex wrench set & instruction manual

BSA Varmint Hunter Precision Laser Sight & Light $47.99 Fast and very simple way to mount both a bright target illuminating light plus a fast aiming red laser to almost any scope with a 1" diameter body tube. Now you can illuminate your target under low light or zero light conditions while simultaneously directing a laser beam that will denote point of pellet strike. Easily mounts onto any 1" rifle scope with up to a 50mm diameter objective lens. Works for all small caliber rifles and all air rifles up to 1000 fps. Kit includes mounting bracket; instruction manual; hex wrench set, 3V. battery for flashlight & (3) 1.5V LR44 batteries for laser sight; remote pressure- sensitive switch and manual push button switch for both laser and flash light. Aluminum mounting bracket, laser and light bodies, black anodized finish.

Shooting Chrony Alpha Master Chronograph, Red $143.99 Shooting Chrony chronographs measure the velocity of almost any projectile, including pellets, steel BBs, plastic and metal airsoft BBs, bullets, shotgun pellets and slugs, arrows, bolts, darts, paintballs and just about any other projectile that fits through the skyscreens (which are the upright structures in the image). Shooting Chrony chronographs measure speed (feet per second and meters per second) from 30 fps to 7,000 fps with more than 99.5% accuracy. MASTER CHRONY MODELS have the same features as their respective SHOOTING CHRONY MODELS plus: Remote Control with close-up read-out and 18 ft cord. Now you can test your airgun’s velocity yourself! All Chrony models are powered by a single 9V battery and can be easily attached to a 1/4"-20 tpi camera tripod for fast, easy set up. The Chrony is simple to use, just unfold the box, set the sky screens in place with the diffusers, turn on the switch and start shooting. Gives numbered shot velocities Velocity stays on display until you shoot again ONE String, from 2 to 32 shot memory (Numbered) Measures High, Low and Average Velocities, Extreme Spread and Standard Deviations. Retrieval of individual shot velocity measurements Delete individual shots from memory (with automatic adjustment of Statistics)

UTG Drooper Scope Rail, 11mm-to-Weaver Adapter, Compensates for Droop & Stops Scope Shift $22.74 UTG DNT06 scope mount base Attaches to rifle’s 11mm scope rail Fits any rifle with an 11mm scope base…either dovetail grooves or a raised rail Decreases barrel droop with 10" upward compensation at 30 yds Stops scope shift–forever! Scope base provides a secure foundation for Weaver/Picatinny mounts 4 hex screws firmly attach base to your Diana rifle Dual scope-stop holes to stop movement 0.68" saddle height 0.78" total height 1" wide 4.72" long 11 slots to accommodate various eye relief adjustments 3.8 oz. Aircraft-grade aluminum Includes 2 hex wrenches, hex screw and set screw Barrel droop is a common issue in some air guns, but it can make it difficult to use a scope. To get the most accuracy from your air rifle, mount a scope, but don’t put it directly on the airgun’s original rail. Instead, mount this great adapter, which offers 10" of upward compensation (at 30 yds.), and then mount your scope. You’ll wonder how you ever got along without it!

Shooting Chrony USB to RS232 Serial Adapter with detachable USB cable $38.39 Serial Communication Parameters Detachable 10cm USB cable RxD, TxD LEDs for monitoring port status & easy diagnostics COM Port Number can be changed to COM1 to COM4 to support HyperTerminal, or any other COM port number required Industry Standard FTDI chip set & drivers for maximum compatibility Supports Windows Vista, XP, 2003, 2000, ME, 98, Linux, MAC-OS8, 9,X Full RS-232 modem control signals RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND Powered by USB port. No external power adapter required Attractive translucent plastic design Serial port speed of up to 230K bps Adds one RS-232 serial port by connecting to USB port Installed as standard Windows COM port FIFO: 128 byte transmit buffer 384 byte receive buffer Works with USB 1.1 & 2.0 host port One DB9 male connector One Mini-CD Driver Software The USB Serial Adapter is designed to make serial port expansion quick and simple. Connecting to a USB port on your computer or USB hub, the USB Serial Adapter instantly adds serial communication port to your system. By taking advantage of the USB bus, the USB Serial Adapter make it easier than ever to add serial port and serial device to your system with easy plug-and-play and hot plug feature. Adapting the new technology, the serial port expansion now takes the new bus with easy and convenient connectivity. Plugging the USB Serial Adapter to the USB port, the adapter automatically detected and installed. There are no IRQ & COM port conflicts, since the port doesn�t require any additional IRQ, DMA, memory as resources on the system. The RS-232 port function as native windows COM port, and it is compatible with Windows serial communication applications. Each port is individually configurable.