Macroline Hose

Macroline Hose

Air Venturi Thread Converter + Hose

$29.99

Hose + adapter for AirForce Airguns scuba tank & hand pump One end has 1/4 BSPP male threads to fit the female threads of the AirForce scuba tank adapter or AirForce hand pump The other end has 1/8 BSPP female threads & fits the hose with 1/8 BSPP male threads Hose ends in 1/8 BSPP female thread for use with 1/8 BSPP filling adapters or our female quick-disconnect coupling Includes flexible hose & 2 O-rings (wide rubber O-ring is used with AirForce 3-stage hand pump; bonded metal O-ring is used with AirForce scuba tank adapter)

Airforce Braided Steel Hose, Quick-Disconnect, Fits Older Airforce Refill Clamp & Hand Pump

$36

Braided steel hose Quick-disconnect fitting Fits older Airforce refill clamp with gauge (U1012) & older AirForce hand pump (U1014) To fill Talon/Condor rifles, use a refill adapter with quick-disconnect nipple (U1013) to attach the hose’s quick-disconnect This braided steel hose will stand up to many years of use without compromising its integrity. Strong, flexible, reliable…and safe. Current AirForce high-pressure fill devices come with a hose. The older pumps and scuba yokes did not come with a hose. If you have one of the older units and need to replace your hose, this is the item to get.

AirForce Scuba Tank Adapter K-valve, Steel Hose

$102.6

AirForce Airguns scuba tank adapter K-valve Pressure gauge goes up to 3,000 psi Stainless steel mesh hose* Ends in a female quick-disconnect *While the hose is stainless steel mesh, it MAY also have a black plastic cover. Which one you get depends on what we have in stock.

AirForce Scuba Tank Adapter, DIN Connector, Steel Hose

$102.6

AirForce Airguns scuba tank adapter DIN connector Pressure gauge goes up to 3,000 psi Stainless steel mesh hose* Ends in a female quick-disconnect *While the hose is stainless steel mesh, it MAY also have a black plastic cover. Which one you get depends on what we have in stock.

Air Venturi Scuba Tank Adapter & Hose Assembly, Female Connector, Gauge

$93.54

Scuba tank adapter Includes hose with female connector Fits both tall- and short-necked scuba tanks K-valve only (does not fit DIN valves Includes gauge Connect your scuba tank to your PCP air rifles and air pistols and fill ‘er up!

Air Venturi G4 Hand Pump, Hose with 1/8" BSPP Threads

$239.99

G4 hand pump Pumps to 3,335 psi/230 bar (use only the correct pressure rated for your gun) 23" hose ends in 1/8" BSPP threads Tube lock prevents separation during transport Moisture filter Ergonomically designed handle Compartment in handle holds spare parts 1/8" BSPP threads Wide footplate with adjustable pumping angle

Air Venturi Microbore Hose, DN2, Up to 4500 PSI, 1/8" BSPP Connectors, 24" Long

$35.99

DN2 microbore hose Fits high pressure tanks and hand pumps Max operating pressure is 4500 psi 1/8" BSPP male & female connectors 24" long Microbore hoses are a great way to get air into your gun without having to fill up a large-diameter hose, which is what traditionally comes with fill equipment such as scuba tanks and hand pumps. Our microbore hose fills your gun faster so you can spend more time shooting and less time filling.

Blackbird CO2 Bulk-fill Conversion Hose & Adapter

$59.99

Fits IZH Drozd Blackbird Adapts Blackbird mag so it connects to a refillable CO2 tank in the stock Eliminates need for disposable CO2 cartridges Easy to convert back to disposable CO2 cartridges No alterations are required Easy to use, easy to attach

AirForce PCP Hand Pump, for AirForce Rifles, Incl. Hose + Adapter, Pumps up to 3600 psi

$234.9

Fits AirForce Condor, Talon & Talon SS rifles. 3-stage hand pump Does not heat up with constant use Requires less effort than other pumps Goes up to 3,600 psi Integral air pressure gauge Moisture filter Incl. 11" braided steel hose with female quick-disconnect coupling and AirForce fill adapter with male quick-disconnect coupling Every pump tested by the manufacturer

Benjamin Carbon Fiber Tank, 54 cu ft, Gauge, Hose w/Female Quick-Disconnect

$719.99

Benjamin carbon fiber tank 54 cu-ft capacity 4,500 psi max pressure 38" long 12" microbore hose with female quick-disconnect Built-in air pressure gauge (manometer) Bleed valve Restricted-flow manifold for controlled, precise filling Lightweight, easier to transport than a metal scuba tanks 4.625"x37" 15 lbs. This monster carbon fiber air tank will keep you in air for days, weeks…and probably months! Fill all your precharged pneumatic (PCP) air pistols and air rifles and shoot day and night. Depending on the size of your gun’s onboard reservoir, you’ll get up to 80 fills with this big boy.

Benjamin Carbon Fiber Tank, 90 cu in, Gauge, Hose w/Female Quick-Disconnect

$479.99

Benjamin carbon fiber tank 90 cu in capacity 4,500 psi max pressure 15" long 12" microbore hose with female quick-disconnect Built-in air pressure gauge (manometer) Bleed valve Restricted-flow manifold for controlled, precise filling Lightweight, easier to transport than a metal scuba tank 4.625"x14.625" 4.6 lbs. Have you resorted to carrying a steel or aluminum buddy bottle to refill your PCP air guns in the field? You’ll get even more refills from this carbon fiber tank since it’s 4,500 psi. Plus, it doesn’t weigh as much. Depending on the size of your airgun’s onboard reservoir, you could get up to 16 fills before you have to refill this tank.

AireTex 45 Gasoline Air Compressor, Max 4500 PSI, Incl. Scuba Yoke & 300 DIN Hose

$4314

The compressor may not look exactly like the one shown here. AireTex 45 gasoline air compressor 4500 PSI max working pressure 3-stage, 3-cylinder compressor Stainless steel valves Low-speed operation Stainless steel intercoolers & after-cooler Dual-stage water separator Purifier meets or exceeds CGA G7.1 Grade E and NFPA 1500 standards Mechanical separator removes particles, oil mist & water droplets Suitable for breathing air Purifier chamber rated for 5000 PSI operation Activated carbon removes tastes & odors Catalyst converts carbon monoxide to carbon dioxide Motor overload shutdown Hour meter 15,000 cu. ft. filtration system Includes standard scuba yoke & 300 DIN filler hose AireTex compressors are as durable and reliable as they are portable. This gasoline compressor gives you max 4500 PSI at less than 10 degrees above ambient room temperature! It takes about 23 minutes to fill an 80 cu ft air bottle. Use only for filling scuba tanks and other high-volume devices. Do not connect directly to an airgun reservoir, as it will fill too fast and heat up. When filling air bottles, do not leave the compressor unattended!

AireTex 45 Electric Air Compressor, Max 4500 PSI, Incl. Scuba Yoke & 300 DIN Hose

$4074

AireTex 45 electric air compressor 4500 PSI max working pressure 3-stage, 3-cylinder compressor Stainless steel valves Low-speed operation Stainless steel intercoolers & after-cooler Dual-stage water separator Purifier meets or exceeds CGA G7.1 Grade E and NFPA 1500 standards Mechanical separator removes particles, oil mist & water droplets Suitable for breathing air Purifier chamber rated for 5000 PSI operation Activated carbon removes tastes & odors Catalyst converts carbon monoxide to carbon dioxide Motor overload shutdown Hour meter 15,000 cu. ft. filtration system Requires 220V electrical outlet Includes standard scuba yoke & 300 DIN filler hose The AireTex 45 electric compressor is a top-rated machine that easily fills up scuba tanks and large carbon fiber tanks. The purifier is rated for 50 hours of run time. The compressor outputs 4.20 cubic feet per minute. It runs at 1100 RPM and has over 50 feet of stainless cooling coils. It takes about 23 minutes to fill an 80 cu ft air bottle. Use only for filling scuba tanks and other high-volume devices. Do not connect directly to an airgun, as it fills too fast and heats up. When filling air bottles, do not leave the compressor unattended!

Creedmoor Sports K Valve to 200 DIN Valve Adapter

$59.98

K valve to 200 DIN valve adapter If your fill hose has a male 200 DIN thread connection and your scuba tank has a K valve, you’ll need this adapter.

909 Big Bore Probe Adapter, Fits older 909 rifles only

$9.59

Probe adapter fits older Sam Yang 909 rifles. It is 1/8" BSPP male on one end and a female thread pattern on the other end, which fits the older 909 probe. It attaches to a hose that ends in a 1/8" BSPP female fitting. We suggest using Teflon tape to connect this probe to an adapter.

Benjamin CO2 Fill Adapter, Fits Discovery, Marauder & Challenger

$43.19

CO2 fill adapter Fits Benjamin Discovery & Marauder and Crosman Challenger C GA-320 fitting with .825×1/4 thread, 8" stainless steel hose, female Foster fitting Use with CO2 paintball tanks Do not use for filling gun with pressurized air

Axsor PCP hand pump

$238.8

3-stage hand pump Pumps to 3000 psi Integral air pressure gauge Built-in moisture trap Includes a hose ending in female 1/8" BSPP threads Buy optional adapters for pumping AirForce and other brands of PCP guns

Benjamin Hand Pump, Fits Crosman & Benjamin PCP Guns

$214.8

3-stage hand pump Made specifically for the Crosman/Benjamin PCP pistols & rifles (fits any brand of PCP gun with a male Foster quick-disconnect on its reservoir) Includes a female Foster quick-disconnect on the end of the pump hose Goes up to 3600 psi (although some of the guns listed above operate on a max pressure of 2000 or 3,000 psi) With other hoses, pump can be adapted to other PCPs Requires less effort than other pumps Integral air pressure gauge Moisture filter

Benjamin CO2 & Air FIll Adapter, Fits Benjamin Air Tank or Standard Paintball CO2 Tank

$83.99

Made specifically for the Dual Fuel capability of the Benjamin Discovery & Marauder and the Crosman Challenger. Includes: CGA-320 fitting for Benjamin carbon fiber tank or a standard paintball CO2 tank Fitting is .825×14 (standard paintball CO2 connector size) 7" stainless steel braided hose (12" overall length) Patented bleeder valve Female Foster quick-disconnect fitting

Benjamin Scuba Yoke, DIN Valve

$155.99

Benjamin scuba yoke Attaches to a scuba tank with a DIN valve Female quick-disconnect coupling on end of hose Includes air pressure gauge (manometer) Fits all Crosman & Benjamin PCP air rifles Fits other PCP guns that have a male quick-disconnect fitting No matter which Crosman or Benjamin precharged pneumatic air gun you own, this scuba yoke will connect your gun to a scuba tank with a DIN valve.

Benjamin Scuba Yoke, K-Valve

$137.94

Benjamin scuba yoke Attaches to a scuba tank with a K-valve Female quick-disconnect coupling on end of hose Includes air pressure gauge (manometer) Fits all Crosman & Benjamin PCP air rifles Fits other PCP guns that have a male quick-disconnect fitting No matter which Crosman or Benjamin precharged pneumatic air gun you own, this scuba yoke will connect your gun to a scuba tank with a K-valve.

Air Venturi PCP Scuba Charging Set

$95.99

Scuba charging set Fits k-valves Hose ends with 1/8 female BSPP No extra adapters needed if you use this for the following guns: Air Arms, Evanix, Sumatra, BAM & Sam Yang Big Bore 909 (the adapter included with these guns attaches to this set) Also fits these guns, but you’ll need to get the adapters indicated: Marauder, Discovery & Challenger rifles: you’ll need Quickadap1EM1B (female quick-disconnect adapter) Dragon Slayer, Fire 202 & 707 Ultra rifles (which come with 7/16 probes): you’ll need PYadapterEJ

Air Venturi Tank Adapter Assembly, 4500 psi, for High-Pressure SCBA Tanks

$105

Tank adapter assembly Fits high-pressure scba (self-contained breathing apparatus) tank, including the Air Venturi carbon fiber tank 4500 psi Includes bleeder, hose and female quick-disconnect coupling Does not include a manometer (air pressure gauge) Fits the Air Venturi carbon fiber tank–AV-4500HPT [PY-A-350]. Inline manometer (air pressure gauge) sold separately–AV-00031 [PY-A-3865]. Suitable for connecting your high-pressure scba tank to a precharged pneumatic air rifle.

Carbon Fiber Tank, 4500 psi, 88 cu ft

$839.99

DOT-approved Carbon fiber filament wound over aluminum bladder 88 cu ft 4500 psi max pressure 11.3 lbs dry weight Includes: Hose with 1/8" BSPP threads on both ends Seal washer Hose has an inline gauge (eliminates use of a yoke) Air Venturi female quick-disconnect adapter with 1/8" BSPP male threads on one end This is not a scuba tank. It’s a carbon fiber tank, which is also called an scba tank, and has a high-pressure scba valve…like the one firefighters use on their scba tanks. Many dive shops do not have the ability to fill these tanks. In some towns, the fire department has a compressor that can fill a high-pressure carbon fiber tank, as firefighters use smaller scba tanks for breathing equipment during rescues. You might want to approach your local fire department and ask if they would be willing to fill your high-pressure carbon fiber/scba tank from their compressor. Another alternative is to contact a local paintball store, as paintballers use carbon fiber tanks to fill their markers. If the only alternative you have is to fill your high-pressure carbon fiber scba tank at a dive shop, a 1/8" BSPP male to DIN female adapter (our part # AA-Z2128-300) can temporarily replace the hose on the valve adapter so the dive shop can fill your tank.

Benjamin CO2 Fill Station, Use With CGA 320 Adapter

$75

Benjamin CO2 fill station Attaches to common bulk-fill CO2 tanks Fill smaller refillable CO2 tanks Pin-valve depressor Fill control Vent knob Use with CGA 320 valve For Crosman & Benjamin guns that have refillable CO2 tanks If your Benjamin or Crosman gun has a refillable CO2 tank, get this fill station to save some money! Get a large CO2 tank, fill it and then attach this unit to the tank. You’ll also need an ASA adapter (CGA 320 valve) to attach from the fill station’s hose to the gun. Bulk-filling saves money, gives you more shots for your money and lets you spend more time shooting your air guns!

Air Venturi Steel Storm CO2 Bulk-Fill Adapter

$59.99

Fits Umarex Steel Storm Eliminates need for disposable CO2 cartridges Go back to using disposable CO2 cartridges anytime No alterations are required! Easy to use, easy to attach Includes hose with bulk-fill CO2 tank connector, which connects to the gun’s CO2 inlet Bulk-fill CO2 tank NOT included No more small powerlets. This adapter accepts any paintball bottle (click here for 12 oz or 20 oz). Approx. 1300 shots with a 20-oz. tank & approx. 780 shots with a 12-oz. tank. With this setup, you’ll spend more time shooting and less time and money on 12-gram CO2 cartridges! Plug & play…absolutely no alterations are made to your Steel Storm!

Hill Pump MK3, Up to 3300 PSI

$347.99

Hill hand pump 3-stage pump Up to 230 bar/3,300 psi Gen 3 pump requires less effort Field-stripped in 5 mins. Dry-Pac system removes 90% of harmful moisture Includes Dry-Pac & hose ending in 1/8" bspp female threads Made in England Hill is known in the industry for making superior hand pumps. They’ve been producing commercial pumps for over 170 years and have applied their industry knowledge to the manufacture of airgun hand pumps. Hill hand pumps have a reputation for being extremely durable and outlasting other pumps by many years. Because the hand pump is easy to disassemble, it can be easily serviced by the owner. There’s no other manufacturer that sells replacement parts for their hand pumps. In fact, there’s no hand pump manufacturer that recommends disassembly of their products. Other manufacturers state that disassembly will void your warranty! Your Hill hand pump comes with a lifetime warranty. Maintain it as indicated in the owner’s manual and use Hill replacement parts as needed, and you’ll have a hand pump on which you can depend for decades.

Be Sociable, Share!

Tweet

Posted in Paint Ball | Tags: macroline hose

« Large Blue

Steel Braided »

Teck Toys

Macroline Hose

Leave a Reply