Inline Regulator

online regulator Paintball Gun leaks?

Every time I screw in my tank of air to all air leaks from a small hole in the line regulator used to work fine before, but how do I fix this? Umm please be more specific? I just bought a tank again … presisted but this problem before even with my old tank

Replace the O-ring edit: Take the gun apart and inspect / or replacement any worn or dry rings (donut little silicon stamps)

macdev Clone – Paintball Gateway

Air Venturi Inline Air Pressure Gauge, 0 to 4500 psi $55.19 Inline air pressure gauge Measures up to 4500 psi Female quick-disconnect Male fitting If you use high-pressure fill devices for your precharged pneumatic guns and don’t have a pressure gauge on your fill device, this will do the job. The inline air pressure gauge fits the Air Venturi carbon fiber tank, AV-4500HPT.

Air Venturi Tank Adapter Assembly, 4500 psi, for High-Pressure SCBA Tanks $105 Tank adapter assembly Fits high-pressure scba (self-contained breathing apparatus) tank, including the Air Venturi carbon fiber tank 4500 psi Includes bleeder, hose and female quick-disconnect coupling Does not include a manometer (air pressure gauge) Fits the Air Venturi carbon fiber tank–AV-4500HPT [PY-A-350]. Inline manometer (air pressure gauge) sold separately–AV-00031 [PY-A-3865]. Suitable for connecting your high-pressure scba tank to a precharged pneumatic air rifle.

Carbon Fiber Tank, 4500 psi, 88 cu ft $839.99 DOT-approved Carbon fiber filament wound over aluminum bladder 88 cu ft 4500 psi max pressure 11.3 lbs dry weight Includes: Hose with 1/8" BSPP threads on both ends Seal washer Hose has an inline gauge (eliminates use of a yoke) Air Venturi female quick-disconnect adapter with 1/8" BSPP male threads on one end This is not a scuba tank. It’s a carbon fiber tank, which is also called an scba tank, and has a high-pressure scba valve…like the one firefighters use on their scba tanks. Many dive shops do not have the ability to fill these tanks. In some towns, the fire department has a compressor that can fill a high-pressure carbon fiber tank, as firefighters use smaller scba tanks for breathing equipment during rescues. You might want to approach your local fire department and ask if they would be willing to fill your high-pressure carbon fiber/scba tank from their compressor. Another alternative is to contact a local paintball store, as paintballers use carbon fiber tanks to fill their markers. If the only alternative you have is to fill your high-pressure carbon fiber scba tank at a dive shop, a 1/8" BSPP male to DIN female adapter (our part # AA-Z2128-300) can temporarily replace the hose on the valve adapter so the dive shop can fill your tank.

Be Sociable, Share!

•