Coolant filtering system of large coolant sumps clean. Trapper Model 6198-110 Chip (TM) removes solids such as potato chips, chips, and chips used refrigerants and other fluids. Motorized drive gaps compressed refrigerant dirty air or fluid in the drum 110 liters, trapping all solid reusable filter bag. With a back flow valve, pumps for clean liquid behind. There are no engines or drivers, and safe operation is guaranteed through the built-in pressure …
Karcher Hose & Handgun Kit Demo

Air Venturi Thread Converter + Hose $29.99 Hose + adapter for AirForce Airguns scuba tank & hand pump One end has 1/4 BSPP male threads to fit the female threads of the AirForce scuba tank adapter or AirForce hand pump The other end has 1/8 BSPP female threads & fits the hose with 1/8 BSPP male threads Hose ends in 1/8 BSPP female thread for use with 1/8 BSPP filling adapters or our female quick-disconnect coupling Includes flexible hose & 2 O-rings (wide rubber O-ring is used with AirForce 3-stage hand pump; bonded metal O-ring is used with AirForce scuba tank adapter)

Daisy 1938 Red Ryder Kit $65.99 The perfect kit for a new shooter!

Airforce Braided Steel Hose, Quick-Disconnect, Fits Older Airforce Refill Clamp & Hand Pump $36 Braided steel hose Quick-disconnect fitting Fits older Airforce refill clamp with gauge (U1012) & older AirForce hand pump (U1014) To fill Talon/Condor rifles, use a refill adapter with quick-disconnect nipple (U1013) to attach the hose’s quick-disconnect This braided steel hose will stand up to many years of use without compromising its integrity. Strong, flexible, reliable…and safe. Current AirForce high-pressure fill devices come with a hose. The older pumps and scuba yokes did not come with a hose. If you have one of the older units and need to replace your hose, this is the item to get.

AirForce Scuba Tank Adapter K-valve, Steel Hose $102.6 AirForce Airguns scuba tank adapter K-valve Pressure gauge goes up to 3,000 psi Stainless steel mesh hose* Ends in a female quick-disconnect *While the hose is stainless steel mesh, it MAY also have a black plastic cover. Which one you get depends on what we have in stock.

AirForce Scuba Tank Adapter, DIN Connector, Steel Hose $102.6 AirForce Airguns scuba tank adapter DIN connector Pressure gauge goes up to 3,000 psi Stainless steel mesh hose* Ends in a female quick-disconnect *While the hose is stainless steel mesh, it MAY also have a black plastic cover. Which one you get depends on what we have in stock.

Air Venturi Scuba Tank Adapter & Hose Assembly, Female Connector, Gauge $93.54 Scuba tank adapter Includes hose with female connector Fits both tall- and short-necked scuba tanks K-valve only (does not fit DIN valves Includes gauge Connect your scuba tank to your PCP air rifles and air pistols and fill ‘er up!

Air Venturi G4 Hand Pump, Hose with 1/8" BSPP Threads $239.99 G4 hand pump Pumps to 3,335 psi/230 bar (use only the correct pressure rated for your gun) 23" hose ends in 1/8" BSPP threads Tube lock prevents separation during transport Moisture filter Ergonomically designed handle Compartment in handle holds spare parts 1/8" BSPP threads Wide footplate with adjustable pumping angle

Air Venturi Microbore Hose, DN2, Up to 4500 PSI, 1/8" BSPP Connectors, 24" Long $35.99 DN2 microbore hose Fits high pressure tanks and hand pumps Max operating pressure is 4500 psi 1/8" BSPP male & female connectors 24" long Microbore hoses are a great way to get air into your gun without having to fill up a large-diameter hose, which is what traditionally comes with fill equipment such as scuba tanks and hand pumps. Our microbore hose fills your gun faster so you can spend more time shooting and less time filling.

Magnum Research Baby Desert Eagle BB gun kit $47.99 CO2 BB Gun Kit

Blackbird CO2 Bulk-fill Conversion Hose & Adapter $59.99 Fits IZH Drozd Blackbird Adapts Blackbird mag so it connects to a refillable CO2 tank in the stock Eliminates need for disposable CO2 cartridges Easy to convert back to disposable CO2 cartridges No alterations are required Easy to use, easy to attach

IZH 46M Breech Seal Kit $11.99 Breech seal kit for IZH 46/46M pistol Includes 2 seals

AirForce PCP Hand Pump, for AirForce Rifles, Incl. Hose + Adapter, Pumps up to 3600 psi $234.9 Fits AirForce Condor, Talon & Talon SS rifles. 3-stage hand pump Does not heat up with constant use Requires less effort than other pumps Goes up to 3,600 psi Integral air pressure gauge Moisture filter Incl. 11" braided steel hose with female quick-disconnect coupling and AirForce fill adapter with male quick-disconnect coupling Every pump tested by the manufacturer

OTIS Flex Cleaning Kit $35.99 Kit comes complete in a zippered nylon belt or pocket pouch. Kit includes: a 34"-rifle and a 16"-pistol flexible cleaning rods with a connector that enables you to have an extra-long rod, 1/2 oz. bottle of bore cleaner, patches, .177 T-Handle Stud, .177 T-Handle bar, .22 short brush, .177 short brush, and an optical bore light. Introducing the new item that comes in your Flex Cleaning System. The Video Instruction shows you the ins and outs of cleaning your air gun. Plus other Otis Products that are be beneficial to the long term use of your air gun.

Echo1 ASR, JP-54, Upgrade Kit $35.94 Echo1 ASR (JP-54) Sniper Rifle Upgrade Kit Increases FPS of Rifle by (40-60 FPS) Comes with Upgrade Spring Upgrade Spring Guide Upgrade Piston

Benjamin Carbon Fiber Tank, 54 cu ft, Gauge, Hose w/Female Quick-Disconnect $719.99 Benjamin carbon fiber tank 54 cu-ft capacity 4,500 psi max pressure 38" long 12" microbore hose with female quick-disconnect Built-in air pressure gauge (manometer) Bleed valve Restricted-flow manifold for controlled, precise filling Lightweight, easier to transport than a metal scuba tanks 4.625"x37" 15 lbs. This monster carbon fiber air tank will keep you in air for days, weeks…and probably months! Fill all your precharged pneumatic (PCP) air pistols and air rifles and shoot day and night. Depending on the size of your gun’s onboard reservoir, you’ll get up to 80 fills with this big boy.

Benjamin Carbon Fiber Tank, 90 cu in, Gauge, Hose w/Female Quick-Disconnect $479.99 Benjamin carbon fiber tank 90 cu in capacity 4,500 psi max pressure 15" long 12" microbore hose with female quick-disconnect Built-in air pressure gauge (manometer) Bleed valve Restricted-flow manifold for controlled, precise filling Lightweight, easier to transport than a metal scuba tank 4.625"x14.625" 4.6 lbs. Have you resorted to carrying a steel or aluminum buddy bottle to refill your PCP air guns in the field? You’ll get even more refills from this carbon fiber tank since it’s 4,500 psi. Plus, it doesn’t weigh as much. Depending on the size of your airgun’s onboard reservoir, you could get up to 16 fills before you have to refill this tank.

AireTex 45 Gasoline Air Compressor, Max 4500 PSI, Incl. Scuba Yoke & 300 DIN Hose $4314 The compressor may not look exactly like the one shown here. AireTex 45 gasoline air compressor 4500 PSI max working pressure 3-stage, 3-cylinder compressor Stainless steel valves Low-speed operation Stainless steel intercoolers & after-cooler Dual-stage water separator Purifier meets or exceeds CGA G7.1 Grade E and NFPA 1500 standards Mechanical separator removes particles, oil mist & water droplets Suitable for breathing air Purifier chamber rated for 5000 PSI operation Activated carbon removes tastes & odors Catalyst converts carbon monoxide to carbon dioxide Motor overload shutdown Hour meter 15,000 cu. ft. filtration system Includes standard scuba yoke & 300 DIN filler hose AireTex compressors are as durable and reliable as they are portable. This gasoline compressor gives you max 4500 PSI at less than 10 degrees above ambient room temperature! It takes about 23 minutes to fill an 80 cu ft air bottle. Use only for filling scuba tanks and other high-volume devices. Do not connect directly to an airgun reservoir, as it will fill too fast and heat up. When filling air bottles, do not leave the compressor unattended!

Otis Lens Cleaning Kit $11.99 The Otis Lens Cleaning Kit contains everything necessary to preserve the quality and functionality of scopes, rangefinders, laser sighting devices, binoculars, cameras, and eye wear. It includes premium anti-fog lens swabs, an Otis microfiber lens cloth, and a mohair lens brush. These components can easily be added to any of the Otis Cleaning Systems. Dont let the poor accuracy of unclean optics prevent you from achieving the results you deserve! Microfiber lens cloth Anti-fog lens swabs Mohair lens brush 1/2 oz anti-fog lens cleaner in spray bottle Mil-spec lens-cleaning tissue paper

CenterPoint Universal Laser/Flashlight Kit $43.19 Laser/flashlight kit Mounts onto any 1" scope tube Up to 50mm objective 50 yds visibility in daylight 200 yds visibility at night Adjustable for windage and elevation Incl. (3) LR44 button cell batteries, 3 V flashlight battery & two tactical on/off pressure switches This flashlight & laser kit by Crosman is great for medium to close range shooting. Mount this onto any 1" scope tube and enjoy increased accuracy from your favorite gun. The flashlight comes with a 3-volt battery and can illuminate your targets up to 30 yards. The laser is adjustable for windage and elevation, it is rated at 50 yards visibility during the day and 200 yards visibility at night. Pick up this kit for dependable and precise target acquisition!

AireTex 45 Electric Air Compressor, Max 4500 PSI, Incl. Scuba Yoke & 300 DIN Hose $4074 AireTex 45 electric air compressor 4500 PSI max working pressure 3-stage, 3-cylinder compressor Stainless steel valves Low-speed operation Stainless steel intercoolers & after-cooler Dual-stage water separator Purifier meets or exceeds CGA G7.1 Grade E and NFPA 1500 standards Mechanical separator removes particles, oil mist & water droplets Suitable for breathing air Purifier chamber rated for 5000 PSI operation Activated carbon removes tastes & odors Catalyst converts carbon monoxide to carbon dioxide Motor overload shutdown Hour meter 15,000 cu. ft. filtration system Requires 220V electrical outlet Includes standard scuba yoke & 300 DIN filler hose The AireTex 45 electric compressor is a top-rated machine that easily fills up scuba tanks and large carbon fiber tanks. The purifier is rated for 50 hours of run time. The compressor outputs 4.20 cubic feet per minute. It runs at 1100 RPM and has over 50 feet of stainless cooling coils. It takes about 23 minutes to fill an 80 cu ft air bottle. Use only for filling scuba tanks and other high-volume devices. Do not connect directly to an airgun, as it fills too fast and heats up. When filling air bottles, do not leave the compressor unattended!

Winchester Portable Campers Kit $79.14 This is the only kit you will need for your next camping trip. A complete assortment of cooking utensils, along with four sets of tableware. All pieces are manufactured using 400-grade stainless steel, and the blades are hand honed to a razor’s edge. All pieces fit in a heavy-duty nylon embroidered bag for easy carrying or storage. Set comes complete with Two interchangeable black rubber locking handles Interchangeable boning blade Large chef’s blade Serrated utility blade Large serving/stir spoon Turning/carving fork Spatula/flipper Flatware service for four including four spoons, forks and serrated knives Acrylic cutting board All pieces are stored in a heavy-duty embroidered nylon case.

Marksman 2000K Air Pistol $37.9 Shooter’s Kit

ThermaSCENT Scent Dispenser Refill Kit $5.99 The ThermaSCENT Refill Kit lasts for up to 12 hours and contains 1 ThermaCELL butane cartridge and 3 mats. Just saturate the mat with any scent, slide the mat onto the ThermaSCENT platform, and insert the new butane cartridge. When you arrive at your hunting spot, simply turn on to start attracting game.

Gamo .177 Caliber Cleaning Kit $15.54 Three piece rod disassembles for easy storage. All components are expressly designed to eliminate the possibility of damage to the relatively shallow rifling of airguns. Always make sure your airgun is unloaded before cleaning or oiling. Great basic and compact maintenance kit for use on .177 caliber pellet rifles or pistols

Yukon NVMT 1×24 Head Mount Kit $443.99 Reference # 24025 Turn your NVMT into a hands-free monocular with Yukon’s NVMT 1×24 Head Mount Kit. This kit comes with a NVMT 1×24 monocular and a head mount to turn your NVMT into a hands-free monocular. The low magnification prevents distance distortion and comfortable viewing, while working.

Leisure Pro Scuba Tank Accessory Kit $47.99 Accessory kit for Leisure Pro 80 cu ft scuba tank Includes black tank boot, yellow tank cover & yellow K-valve protector

Yukon NVMT Laser 3×42 Rifle Scope Kit $540 This is a Gen 1 NV scope and will not stand up to heavy-recoiling firearms or magnum spring-piston airguns. The NVMT Laser 3×42 Rifle Scope Kit is perfect for long-distance observation and includes everything needed for an outdoor adventure. The NVMT 3×42 Rifle Scope Kit provides the user with everything needed to mount the included NVMT on a rifle. Versatility is this affordable scope’s middle name. Included Accessories: Weaver Mounts Padded Corduroy Case with Carrying Strap NVMT 3×42 Gen 1 Eyepiece Laser Pointer

Crosman T4 Kit $83.99 New CO2 pellet and BB gun

Daisy Powerline 008 Kit $81.59 Gun, CO2, Targets, Glasses & Ammo

Daisy Powerline 15XT KIT $47.99 BBs 15 Shots

Remington AirMaster 77 Kit $83.99 4×20 Scope, Rings, Ammo & Targets

Franchi SPAS12 ShotgunTraining Kit $51.54 Includes target, BBs and safety glasses

Crosman PRO77 Kit $80.64 New CO2 blow back BB gun

Crosman 760 Pumpmaster Kit $59.99 4×15 Scope, Targets, Glasses, Ammo

Marksman 3030K Slingshot Kit $10.79 Includes 100 .30 cal. steel shot

Marksman 3055K Slingshot Kit $11.99 Folding Slingshot & Ammo

Beeman P17 Pistol Kit $55.14 Gun, Glasses & Pellets

Daisy 5880 Shadow Kit $71.94 Scope, Targets, Ammo & Glasses

Daisy Powerline 5693 Kit $65.94 BB Pistol

Beeman P17 Kit $59.99 P17 with Red Dot Sight

Mossberg Airsoft Tactical Kit $33.54 .45 Pistol & 590 Shotgun Grip Model

Gamo .177 Air Gun Cleaning Kit $23.99 Air rifle yoke (stand) Gamo airgun oil 25 felt cleaning pellets 25 cleaning patches 2-piece cleaning rod 1 patch loop 1 nylon brush Rod handle Protective cover The Gamo cleaning kit contains everything you need to clean and maintain your spring-piston air rifle or air pistol. The portable gun stand is light and easy to assemble. Take it from the shop to the range. Made of durable, easy-to-clean material. Sturdy enough to hold any adult airgun.

RWS Rifle Shooter’s Kit, .177 Caliber $43.19 Kit provides everything needed to shoot and maintain your RWS .177 airgun: Jointed Cleaning Rod, Chamber Lube, Spring Cylinder Oil, Oiling Needle, .177 Jag, .177 Bore Brush, 1 tin each/250 Meisterkugeln & Superdome Pellets, 25- .177 cleaning pellets and four 10 meter – 4" x 4" targets.

RWS Rifle Shooter’s Kit, .22 Caliber $43.19 The RWS Shooter’s Kit contains everything you need to maintain your .22 caliber air rifle. Includes: 3-piece cleaning rod .22 caliber jag .22 caliber brush 1/2-oz RWS chamber lube 1-oz RWS spring cylinder oil 10-meter distance targets (10 targets) RWS Superdome pellets (500-count) .22 caliber cleaning pellets (25-count) 3" needle to apply lubricant

Well MB03/07 Series Sniper Rifle Power Up Kit $33.54 MB03/07 Series Sniper Rifle Power Up Kit 20% increase in accuracy, velocity & performance Comes with Power Up Spring Power up Spring Guide Power Up Cylinder

Air Arms S200 10-Shot Conversion Kit, .177 or .22 Cal $71.99 Turn your single-shot Air Arms S200 into a repeater! Fits single-shot S200 rifles Includes conversion kit (10-shot mag not included) Use with either .177 or .22 caliber guns You must also purchase the appropriate caliber circular clip (see options in left column) to use this conversion kit

CenterPoint Elkhorn Jr. Compound Bow $59.99 Complete Kit, Ready to Shoot!

Daisy Red Ryder 70th Anniversary Edition with Tin $55.14 The perfect kit for a new shooter!

Crosman TAC 1 and P30 $71.99 Airsoft CLEAR TAC Kit

Desert Eagle .44 Airsoft $33.59 Magnum High Impact Kit

UTG Performance Upgrade Kit for Type 96 Spring Airsoft Sniper Rifle $35.94 Performance Upgrade Kit for UTG Sport S368 Shadow Ops Airsoft Sniper Rifle 20% increase in accuracy, velocity & performance! Includes upgraded spring, metal piston & metal spring guide with torque-absorbing ball-bearing set Easy installation

AirForce Edge Flexi-Weight Kit, 5 Weights, 5 O-Rings $35.4 AirForce Edge Flexi-Weight kit Mount on frame or muzzle ext. of an Edge air rifle Redistributes weight for the needs of any shooter O-rings secure the weights Includes 5 weights and 5 o-rings If your AirForce Edge air rifle is used by more than one shooter or you’ve got a shooter who’s growing and needs to adjust the gun’s weight depending on height and growth, then these Flexi-Weights are the ideal way to accommodate change. Rapidly put them on and take them off. Easy to attach additional weights, too. Simply slide on and hold tight with the included o-ring. This economical 5-weight kit is ideal for clubs.

Air Arms S200 10-Shot Conversion Kit, .22 Cal, Incl. 10-Shot Mag $107.99 Turn your single-shot Air Arms S200 into a repeater! Fits single-shot S200 rifles Includes conversion kit & 10-shot mag

IZH 46M Match Pistol Kit $671.99 Incl. Red Dot Sight & Case

Crosman Urban Mission Airsoft Kit $39.54 M74 Mini Machine Gun & P30 Spring Pistol

Crosman Stinger R39 Airsoft Kit $53.88 Rifle + Pistol & much more

Walther PPK/S Kit, Black $83.99 Gun, CO2, Targets, Glasses & BBs

Walther P99 — Black Extra Kit $29.94 Spring Powered Airsoft Pistol

Airsoft M4 Field Duty Kit $119.94 Colt MK IV Spring Pistol & A17 R.I.S AEG

Mossberg Tactical Duty Airsoft Kit $43.14 Spring-powered shotgun & pistol, black

Crosman Tactical Recon Airsoft Kit $77.94 Incl. AS32 shotgun & P30T pistol

Crosman Stinger Challenge Airsoft Kit $47.99 2 spring pistols, BBs & sticky target

DPMS Panther Arms ON DUTY KIT $41.99 A15, COLT MK IV, & Accessories – black

Crosman Stinger R39 Kit Clear $59.94 Rifle + Pistol & much more

Hoppe’s Air Rifle & Air Pistol Cleaning Kit, .17 Caliber $11.94 Hoppe’s airgun cleaning kit 3-piece steel rod with looped handle 2.25-oz. Hoppe’s 9 lubricating oil Brass jag .17-cal brass brush* Cleaning patches Gun care guide *The brush is .17 caliber. It will still work on your .177-caliber airguns. While airguns don’t require constant cleaning like firearms, there are times when they need to be cleaned to achieve maximum accuracy. Hoppe’s has a reputation for making high-quality gun oil and cleaning accessories.

Hakkotsu Thunder B CO2 Package Grenade Kit B $35.99 Grenade kit Package includes 1 main core body, 3 cylinder shells & 4 safety pins The Hakkotsu Thunder B grenade is powered by disposable CO2 gas and is ideal for use in milsim bombing demonstrations. The color & shape of this grenade is similar to it’s real military counterpart in that a safety pin must be pulled to trigger the explosion. The Thunder B is reusable, simply replace the CO2 gas cylinder along with the outer shell and you’ll be ready to fire again! This grenade creates a noise level explosion of 130db, be alert when using.

Benjamin & Sheridan Repair Kit, Fits Some Post-1995 Multi-Pumps w/Cartridge Valve $19.14 Repair kit fits these multi-pump guns made after 1995 & they have a compression tube that slides out of the assembly & does not need a special tool (has a cartridge valve & the valve is NOT soldered). It may be necessary to push out the assembly from the front of the tube: Benjamin 397 & 392 guns as well as Sheridan C9 (Silver Streak) & CB9 (Blue Streak). To determine if this kit is for you: Remove the screw in front of triggerguard to remove rear part of the stock Remove the pins or screws that hold the retention cap at the rear of the receiver Remove the guide pin, spring & hammer to reveal the compression tube If the brass compression tube comes out in one piece, then this is the kit you need If your gun has a rounded square hole with a valve stem sticking up through it, then you need the other repair kit (CR/Repairkit) If you need assistance, contact our technicians at 888-262-4867, ext. 244

Hill MK3 Hand Pump Full Service Seal Kit w/Micron Filter $43.19 Full service seal kit For Hill MK3 hand pumps Includes micron filter, 7 seals and other misc. replacement parts Service seal kit for the Hill MK3 hand pump. Regular maintenance is essential for keeping your Hill hand pump in proper working condition. Includes micron filter, piston seal and all other exchangeable seals. The MK3 hand pump has 3 rings on the top and bottom of the pump body tube.

Tech Force Spring Gun Cleaning Kit with Seals, Mainspring, Oil + More $11.46 Tech Force cleaning kit Suitable for various Tech Force spring-piston airguns 6 leather seals: fit TF S2-1, TF24, FT15, TF39 & TF49 1 mainspring: fits TF15, TF39 & TF49 1 safety: fits TF15, TF39 & TF49 Also includes oil* in a spout-top squeeze bottle, segmented cleaning rod, nylon brush & cloth mop *The oil is not chamber lube. It’s a petroleum-based oil for wiping down the exterior of your gun to remove fingerprints and leave a protective coating on wood and metal surfaces.

AirForce Edge Flexi-Weight Kit, 1 Weight, 1 O-Ring $8.1 AirForce Edge Flexi-Weight kit Mount on frame or muzzle ext. of an Edge air rifle Redistributes weight for the needs of any shooter O-rings secure the weights Includes 1 weight and 1 o-ring If your AirForce Edge air rifle is used by more than one shooter or you’ve got a shooter who’s growing and needs to adjust the gun’s weight depending on height and growth, then these Flexi-Weights are the ideal way to accommodate change. Rapidly put them on and take them off. Easy to attach additional weights, too. Simply slide on and hold tight with the included o-ring.

Walther Airsoft P99 Special Operations BiColor $27.54 Spring Powered – BiColor Action Kit

Benjamin & Sheridan Repair Kit, Fits Some Pre-1995 Multi-Pump Guns w/Soldered Valve $33.54 Repair kit fits these multi-pump guns made before 1995 (they have a soldered valve): Benjamin 397, 392, 340, 342 & 347 guns as well as Sheridan C9 (Silver Streak) & CB9 (Blue Streak). To determine if this kit is for you: Remove the screw in front of triggerguard to remove rear part of the stock Remove the pins or screws that hold the retention cap at the rear of the receiver Remove the guide pin, spring & hammer to reveal the compression tube If the compression tube appears to be brass & is one piece with a pin protruding from it, you’ll need the other kit (CR/RepairKitC9) instead of this one If your gun has a rounded square hole with a valve stem sticking up through it, then the kit shown on this page will fit your gun. The included valve tool (pictured on this page) is needed to remove the parts from the soldered valve body (directions included with kit). If you need assistance or would like Pyramyd Air’s techs to do the installation, contact our technicians at 888-262-4867, ext. 244 This kit includes parts that are still available from Crosman and may require slight modification. If your gun is very old and has been treated with any petroleum distillates and/or solvents that damage rubber seals, the removal of the old parts can be challenging. The obsolete gasket that seals the valve guide to the compression tube can normally be reused. If you used petroleum products, it may be irreparably damaged and will need to be replaced by a thin o-ring. If you would like Pyramyd Air’s tech department to install this kit in your Sheridan or Benjamin rifle, please contact them at 888-262-4867, ext. 5. There will be an additional cost for the installation service, plus shipping both ways…BUT it’ll be done perfectly!

Walther P99 Dueler Spring Target Kit $39.59 Fully licensed trademarks

Marines Airsoft Battle Spring Rifle & Pistol Kit $59.99 SR01 Rifle, SP01 Pistol, dog tag & more

Marines Airsoft Task Force 6 Airsoft Kit $83.99 Incl. AEG Rifle, spring pistol & holster

Crosman 1088B Kit BB & Pellet Pistol $57.59 Incl. Ammo & Glasses

Crosman 664GT Powermaster Air rifle kit $51.59 BB & Pellet Repeater

UTG Master Sniper Green Airsoft Kit $143.94 Gen 5. Bolt Action. 460FPS w/ 0.2g BBs

Marksman 3330 Slingshot Band Replacement Kit $4.25 For Marksman 30.06, 3027, 3040, 3047, and 3061 Fits most tubular band slingshots with 1/4" (6.35mm)diameter yokes Package includes one band with two vinyl yoke retainers.

Eastman Outfitters X-Force 500 Crossbow Kit $479.99 Incl. 4 Bolts, Quiver, 4×32 Scope, Rings

H&K MP5 & P30 Holiday Kit Black $107.94 Dual Power Rifle, Spring Pistol

H&K MP5 & P30 Holiday Kit, Clear $101.94 Dual Power Rifle, Spring Pistol

Classic Army Sportline M15A4 Tactical Carbine Kit $179.94 Carbine Value Package

Marines Airsoft Dual Spring Airsoft Pistol Kit $47.94 2 spring pistols, BBs & target

Thompson Military Metal M1A1 AEG Kit $239.99 Two Magazines , 2700 Rd Bio BBs

UTG Master Sniper Airsoft Kit, Black $155.94 Gen 5, Bolt-Action

Daisy 1938 Red Ryder Fun Kit $55.19 Safety Glasses, BBs & Targets!

Daisy Pink 1998 BB Gun Fun Kit $47.99 Safety Glasses, BBs & Targets!

Daisy Cleaning Kit, .177" caliber $23.94 Can be used on .177 caliber BB or pellet rifles or pistols. Keeps your rifle or pistol performing well. Great for clearing pellets stuck in the barrel. Includes cleaning rods, Daisy gun oil and cleaning patches. .177" Pellet & BB guns

300 Round DPMS On Duty Kit Rifle Magazine $22.74 Will fit in: CG18780, 18980. Build material: molded polycarbonate. Color: Balck Easy to fill, just pour in 300 rounds through the top hatch. Easy winding spring dial on the bottom keeps tension on the ammo for smooth feeding. Made in China

Crosman Recon Airsoft Kit, Brown/Black $71.99 Short-barrel gun with a pistol grip

Daisy Powerline 901 air rifle kit $95.99 Gun, Scope, Glasses, Ammo & Targets

Stinger P9T Airsoft Pistol Kit Black $27 Holster Included

Stinger P9T Airsoft Pistol Kit Desert Camo $27 Holster Included

Crosman 760 Pumpmaster Kit, Pink Stock $59.94 4×15 Scope, Targets, Glasses, Ammo

Crosman MAR177 AR-15 Upper PCP Conversion Kit $720 Fits AR-15 Lower, .177 Cal.

Crosman Stinger S2 Clear Airsoft Kit $65.94 Stinger R36 & P30

Air Arms MPR Palm Rest Kit, Fits S400 MPR Air Rifle $71.94 Palm rest kit Fits Air Arms S400 MPR 10-meter air rifle Includes palm shelf, hex wrench, washers, screws and 2 lengths of extenders Customize your Air Arms S400 MPR air rifle by adding a palm rest for a steadier hold. The extenders come in two lengths that will suit most shooters. Generally speaking, a palm rest will increase your accuracy.

Air Arms MPR Butt Spacer Kit, 3 Spacers, 20mm Total Width $21.59 Butt spacer kit Fits Air Arms S400 MPR 10-meter air rifle Includes 3 spacers of different thicknesses and 3 sets of screws of different lengths Create the perfect length of pull (LOP) with these butt spacer inserts. Made for the Air Arms S400 MPR 10-meter air rifle, these inserts come in three thicknesses and different screw lengths to attach one, two or all three spacers. Ideal for clubs that have more than one size shooter using the S400 MPR air rifle. Also useful if the air gun is used by one shooter who’s still growing.

Marksman 2040 $50.34 BB Zinc Repeater Air Rifle Kit

JB Unicorn M120 Upgrade/Tune Up Kit for Model 4 $59.94 Includes: M120 Spring, Reinforced Piston, Metal Spring Guide with Bearing, Aluminum Air Nozzle, 2 port Cylinder, Aluminum Cylinder Head and Piston Head.

Franchi Stunt Police Spring Shotgun 44 Kit , Clear $51.54 Fast Shooting Foregrip, Anti-Shock ABS

Crosman M4-177 Multi-Pump Air Rifle Kit, Black $95.99 BB & Pellet Repeater, 3-10 Pumps

Crosman M4-177 Tactical Air Rifle Kit, Tan/Black $83.99 BB & Pellet Repeater, 3-10 Pumps

Daisy Model 9840 Grizzly B Air Rifle Kit $76.74 A fine airgun for new shooters!

Gamo Varmint Hunter Kit, 4×32 Rifle Scope, Laser & Flashlight $83.88 Rifle scope, flashlight & laser (specs are listed for scope only) 4x magnification 32mm objective lens 1" tube 1/4 MOA (1/4" click value @ 100 yds) Crosshair reticle 28.8′ field of view @ 100 yds 3" eye relief 11.8" long Includes pressure cables, removable caps with click buttons for laser & flashlight and 1-pc scope mount with 3/8" dovetail with rings for flashlight and laser. Other features: Hunting turrets Fully coated lenses Shockproof Fogproof Waterproof Anodized matte finish

Marksman 3355 Slingshot Hyper-Velocity Band Replacement Kit $5.46 Tapered bands provide 30% greater velocity Marksman’s hyper-velocity bands represent the ultimate in slingshot bands. And, because of their easier pull, you don’t have to strain to hold your position before releasing a shot. This makes shooting easier and more fomfortable- with increased accuracy. Fits Marksman Laserhawk slingshot models 3006(T), 3055 and 3060(L) but also fits Marksman models 3025, 3040, 3041 and most slingshots with 1/4" diameter yokes. Package includes one band with two vinyl yoke retainers.

Stinger P9 Airsoft Pistol Kit, Dark Earth/Clear $27 Spring Air Repeater Pistol

Crosman Stinger P9T Airsoft Pistol Kit Clear/Black $27 Holster Included

SIG Sauer GSR 1911 CO2 BB Pistol Kit $47.94 Gun, Laser, Safety Glasses & BBs

Creedmoor Sports K Valve to 200 DIN Valve Adapter $59.98 K valve to 200 DIN valve adapter If your fill hose has a male 200 DIN thread connection and your scuba tank has a K valve, you’ll need this adapter.

909 Big Bore Probe Adapter, Fits older 909 rifles only $9.59 Probe adapter fits older Sam Yang 909 rifles. It is 1/8" BSPP male on one end and a female thread pattern on the other end, which fits the older 909 probe. It attaches to a hose that ends in a 1/8" BSPP female fitting. We suggest using Teflon tape to connect this probe to an adapter.

Benjamin CO2 Fill Adapter, Fits Discovery, Marauder & Challenger $43.19 CO2 fill adapter Fits Benjamin Discovery & Marauder and Crosman Challenger C GA-320 fitting with .825×1/4 thread, 8" stainless steel hose, female Foster fitting Use with CO2 paintball tanks Do not use for filling gun with pressurized air

Axsor PCP hand pump $238.8 3-stage hand pump Pumps to 3000 psi Integral air pressure gauge Built-in moisture trap Includes a hose ending in female 1/8" BSPP threads Buy optional adapters for pumping AirForce and other brands of PCP guns

Air Arms S200 .177 Cal 10-Shot Magazine $47.94 .177 cal magazine for Air Arms S200 10-shot mag Fits S200 rifles that already have the 10-shot conversion kit installed!

Benjamin Hand Pump, Fits Crosman & Benjamin PCP Guns $214.8 3-stage hand pump Made specifically for the Crosman/Benjamin PCP pistols & rifles (fits any brand of PCP gun with a male Foster quick-disconnect on its reservoir) Includes a female Foster quick-disconnect on the end of the pump hose Goes up to 3600 psi (although some of the guns listed above operate on a max pressure of 2000 or 3,000 psi) With other hoses, pump can be adapted to other PCPs Requires less effort than other pumps Integral air pressure gauge Moisture filter

Benjamin CO2 & Air FIll Adapter, Fits Benjamin Air Tank or Standard Paintball CO2 Tank $83.99 Made specifically for the Dual Fuel capability of the Benjamin Discovery & Marauder and the Crosman Challenger. Includes: CGA-320 fitting for Benjamin carbon fiber tank or a standard paintball CO2 tank Fitting is .825×14 (standard paintball CO2 connector size) 7" stainless steel braided hose (12" overall length) Patented bleeder valve Female Foster quick-disconnect fitting

Benjamin Scuba Yoke, DIN Valve $155.99 Benjamin scuba yoke Attaches to a scuba tank with a DIN valve Female quick-disconnect coupling on end of hose Includes air pressure gauge (manometer) Fits all Crosman & Benjamin PCP air rifles Fits other PCP guns that have a male quick-disconnect fitting No matter which Crosman or Benjamin precharged pneumatic air gun you own, this scuba yoke will connect your gun to a scuba tank with a DIN valve.

Benjamin Scuba Yoke, K-Valve $137.94 Benjamin scuba yoke Attaches to a scuba tank with a K-valve Female quick-disconnect coupling on end of hose Includes air pressure gauge (manometer) Fits all Crosman & Benjamin PCP air rifles Fits other PCP guns that have a male quick-disconnect fitting No matter which Crosman or Benjamin precharged pneumatic air gun you own, this scuba yoke will connect your gun to a scuba tank with a K-valve.

CenterPoint Optics Shooters Kit, Quick-Release Bipod, 3-9×40 Adventure Class Rifle Scope, Illuminated Mil-Dot Reticle, 1/4 MOA, 1" Tube, See-Thru Weaver Ri $104.34 Rifle scope 3-9x magnification 40mm objective lens (angled) 1" tube 1/4 MOA (1/4" click value @ 100 yds) Mil-dot reticle (red/green illumination*) 100 yds parallax setting 38.4 ft to 14.0 ft field of view @ 100 yds 3.94" eye relief 13mm to 4.5mm exit pupil 20 oz. 13.5" long Includes quick-release bipod, 3V CR2032 battery, lens caps & Weaver rings Other features: Nitrogen-filled Shockproof Fogproof Waterproof Multi-coated lens Integral sunshade Black matte finish *If you don’t use the illumination, the reticle will be black. Do you hunt? Plink? This economical, illuminated scope will work very well whether it’s dark or daylight. This special combo includes a quick-release bipod. The bipod is more like a pair of shooting sticks (also called buffalo sticks, as this style was frequently used by buffalo hunters in the Old West): Unfolds in seconds and locks into place without assembly Improves accuracy whether you’re sitting, kneeling or standing — this bipod provides rigid, steady support. Assembles & extends from 14" to 40" in seconds, virtually hands-free. Includes belt carrier

Air Arms S200 .22 Cal 10-Shot Magazine $47.94 .22 cal magazine for Air Arms S200 10-shot mag Fits S200 rifles that already have the 10-shot conversion kit installed!

Air Venturi PCP Scuba Charging Set $95.99 Scuba charging set Fits k-valves Hose ends with 1/8 female BSPP No extra adapters needed if you use this for the following guns: Air Arms, Evanix, Sumatra, BAM & Sam Yang Big Bore 909 (the adapter included with these guns attaches to this set) Also fits these guns, but you’ll need to get the adapters indicated: Marauder, Discovery & Challenger rifles: you’ll need Quickadap1EM1B (female quick-disconnect adapter) Dragon Slayer, Fire 202 & 707 Ultra rifles (which come with 7/16 probes): you’ll need PYadapterEJ

Air Venturi Tank Adapter Assembly, 4500 psi, for High-Pressure SCBA Tanks $105 Tank adapter assembly Fits high-pressure scba (self-contained breathing apparatus) tank, including the Air Venturi carbon fiber tank 4500 psi Includes bleeder, hose and female quick-disconnect coupling Does not include a manometer (air pressure gauge) Fits the Air Venturi carbon fiber tank–AV-4500HPT [PY-A-350]. Inline manometer (air pressure gauge) sold separately–AV-00031 [PY-A-3865]. Suitable for connecting your high-pressure scba tank to a precharged pneumatic air rifle.

Carbon Fiber Tank, 4500 psi, 88 cu ft $839.99 DOT-approved Carbon fiber filament wound over aluminum bladder 88 cu ft 4500 psi max pressure 11.3 lbs dry weight Includes: Hose with 1/8" BSPP threads on both ends Seal washer Hose has an inline gauge (eliminates use of a yoke) Air Venturi female quick-disconnect adapter with 1/8" BSPP male threads on one end This is not a scuba tank. It’s a carbon fiber tank, which is also called an scba tank, and has a high-pressure scba valve…like the one firefighters use on their scba tanks. Many dive shops do not have the ability to fill these tanks. In some towns, the fire department has a compressor that can fill a high-pressure carbon fiber tank, as firefighters use smaller scba tanks for breathing equipment during rescues. You might want to approach your local fire department and ask if they would be willing to fill your high-pressure carbon fiber/scba tank from their compressor. Another alternative is to contact a local paintball store, as paintballers use carbon fiber tanks to fill their markers. If the only alternative you have is to fill your high-pressure carbon fiber scba tank at a dive shop, a 1/8" BSPP male to DIN female adapter (our part # AA-Z2128-300) can temporarily replace the hose on the valve adapter so the dive shop can fill your tank.

Crosman Williams Rear Sight, Notched Blade, Elevation & Windage Adj., 3/8" Mount $71.99 Rear sight Elevation & windage target turrets 3/8" integral mount Positive internal locks Fits Crosman air pistol models 1740, 2240 1377 & 1322 that have been modified with the AS2250-013 receiver kit Williams rear sights have a reputation as being top-notch. Made with quality materials, they can easily be fitted to Crosman guns that have the AS2250-013 receiver kit, which gives you a mounting rail. To increase accuracy, get this rear sight!

ECHO 1 Short M203 Airsoft Grenade Launcher, Mod4/Mod16 Series $117.54 Echo1 2 in 1 M203 Launcher Kit RIS Mount Included: Mounts onto all 20mm RIS (Quick Detach) Barrel Mount Included: Mounts on most Mod4 / Mod16 series AEG Barrels Full metal Frame and Tube Reinforced Trigger / pin assembly for enhanced durability

Hakkotsu Thunder B Package B Replacement Grenade Cylinder Shells, 12ct $19.19 Replacement Thunder B grenade cylinder shells 12ct These replacement Hakkotsu grenade cylinder shells fit the Thunder B grenade exclusively. Pick up these spare shells if you lose or misplace any of the original shells from the Package B grenade kit.

G&G Knee Pads & Elbow Pads Set, Large, Desert Color $39.54 Knee pads & elbow pads set Desert color Large This G&G knee & elbow pad kit will protect you from unnecessary scrapes and bruises in the battlefield. The pads are camo colored and have a durable plastic shield for maximum protection. Pick one up for your next airsoft skirmish!

Air Venturi Williams Rear Sight, Notched Blade, Elevation & Windage Adj., 3/8" Mount $71.99 Rear sight Elevation & windage target turrets 3/8" integral mount Positive internal locks Fits Crosman air pistol models 1740, 2240 1377 & 1322 that have been modified with the AS2250-013 receiver kit Includes a hex wrench Williams rear sights have a reputation as being top-notch. If your Crosman pistol has the AS2250-013 receiver kit, you can attach this fine site to your air gun. You’ll notice increased accuracy and greater satisfaction once you start using this rear sight.

Benjamin CO2 Fill Station, Use With CGA 320 Adapter $75 Benjamin CO2 fill station Attaches to common bulk-fill CO2 tanks Fill smaller refillable CO2 tanks Pin-valve depressor Fill control Vent knob Use with CGA 320 valve For Crosman & Benjamin guns that have refillable CO2 tanks If your Benjamin or Crosman gun has a refillable CO2 tank, get this fill station to save some money! Get a large CO2 tank, fill it and then attach this unit to the tank. You’ll also need an ASA adapter (CGA 320 valve) to attach from the fill station’s hose to the gun. Bulk-filling saves money, gives you more shots for your money and lets you spend more time shooting your air guns!

Air Venturi Steel Storm CO2 Bulk-Fill Adapter $59.99 Fits Umarex Steel Storm Eliminates need for disposable CO2 cartridges Go back to using disposable CO2 cartridges anytime No alterations are required! Easy to use, easy to attach Includes hose with bulk-fill CO2 tank connector, which connects to the gun’s CO2 inlet Bulk-fill CO2 tank NOT included No more small powerlets. This adapter accepts any paintball bottle (click here for 12 oz or 20 oz). Approx. 1300 shots with a 20-oz. tank & approx. 780 shots with a 12-oz. tank. With this setup, you’ll spend more time shooting and less time and money on 12-gram CO2 cartridges! Plug & play…absolutely no alterations are made to your Steel Storm!

Hill Pump MK3, Up to 3300 PSI $347.99 Hill hand pump 3-stage pump Up to 230 bar/3,300 psi Gen 3 pump requires less effort Field-stripped in 5 mins. Dry-Pac system removes 90% of harmful moisture Includes Dry-Pac & hose ending in 1/8" bspp female threads Made in England Hill is known in the industry for making superior hand pumps. They’ve been producing commercial pumps for over 170 years and have applied their industry knowledge to the manufacture of airgun hand pumps. Hill hand pumps have a reputation for being extremely durable and outlasting other pumps by many years. Because the hand pump is easy to disassemble, it can be easily serviced by the owner. There’s no other manufacturer that sells replacement parts for their hand pumps. In fact, there’s no hand pump manufacturer that recommends disassembly of their products. Other manufacturers state that disassembly will void your warranty! Your Hill hand pump comes with a lifetime warranty. Maintain it as indicated in the owner’s manual and use Hill replacement parts as needed, and you’ll have a hand pump on which you can depend for decades.

Large Aluminum Pistol Case -Silver $71.94 This beautiful, convenient and lightweight multi-purpose aluminum pistol case is large enough to carry extra ammunition and a cleaning kit. A foam barrier stabilizes all items in the case by compression. This locking case comes with two keys, making it safer from prying eyes and hands. Outside Dimensions: 18"L x 13"W x 5"H Inside Dimensions: 17"L x 12"W x 5"H

RWS Pellet Sampler $14.94 The practical, economical way to determine the most effective pellet for your airgun. Kit includes 100 each of the most popular airgun pellet styles: The Meisterkugeln pellet is designed for accuracy. The Hobby pellet is designed for high velocity. The Super H Point pellet is designed to deliver a shock-like effect. The Superpoint pellet is designed for high velocity and penetration. The Superdome pellet is designed for greater impact

Otis 085 Ultra Bore Solvent, 2 oz. $5.94 Cleans, lubricates and protects against rust all in one easy application. Removes all traces of lead fouling that can accumulate in your air rifle or pistol’s bore. Just wet a patch and pull through your bore until all traces of lead are removed or until the patch comes out clean. Leaves your bore bright and ready to shoot. Will not cause build up or leave a residue. The same bore cleanser that is included in the Flex Cleaning Kit.

Competition Electronics Indoor Lighting System, Fits ProChrono Chronographs $71.99 Indoor lighting system Fits all ProChrono digital chronographs Provides optimum performance indoors or in low light Portable & fast setup Patented electronic design eliminates the need for light bulbs Red LED "on" indicator lights 120V AC 60Hz adapter input 24V DC 200 mAh adapter output 200 mAh power consumption 120V AC adapter* included *Can also operate on a 24V DC power source, such as two 12V batteries wired in a series. Whether you shoot indoors or out, you’ll need this supplementary lighting kit at some time. It’s a good idea to have it on hand right from the start.

Save Phace Diablo Mask, Dope Series $65.99 Strike fear into battlefield competitors with the Save Phace Diablo Mask . This uniquely designed protective face mask is made with durable, high quality plastic material that can deflect stray BBs with ease. The mask features an interchangeable polycarbonate lens with military grade AF+AS+UV coatings, and an adjustable strap with Sure Grip Technology. Attention Customers: The Save Phace Diablo Mask does not come with a Mask Stuff Bag or Phace Mask Protectant Kit. Features: Standard Open Cell Foam-Non Replaceable Protective Clear Coat Comes with Single Pane Clear Lens 30 day Limited Manufacturer’s Warranty

Save Phace Intimidator Mask, Diss Series $53.99 Prepare for battle with the Save Phace Intimidator Mask . This uniquely designed protective face mask is made with durable, high quality plastic material that can deflect stray BBs with ease. The mask features an interchangeable polycarbonate lens with military grade AF+AS+UV coatings, and an adjustable strap with Sure Grip Technology. Attention Customers: The Save Phace Intimidator Mask does not come with a Mask Stuff Bag or Phace Mask Protectant Kit. Features: Open Cell Foam Protective High Gloss Clear Coat Comes with Single Pane Lens 30 day Limited Manufacturer’s Warranty

Save Phace Jungle Justice mask, Diss series $53.99 Prepare for battle with the Save Phace Jungle Justice Mask . This uniquely designed protective face mask is made with durable, high quality plastic material that can deflect stray BBs with ease. The mask features an interchangeable polycarbonate lens with military grade AF+AS+UV coatings, and an adjustable strap with Sure Grip Technology. Attention Customers: The Save Phace Jungle Justice Mask does not come with a Mask Stuff Bag or Phace Mask Protectant Kit. Features: Open Cell Foam Protective High Gloss Clear Coat Comes with Single Pane Lens 30 day Limited Manufacturer’s Warranty

Save Phace OSC Mask, Diss Series $53.99 Prepare for battle with the Save Phace OSC Mask . This uniquely designed protective face mask is made with durable, high quality plastic material that can deflect stray BBs with ease. The mask features an interchangeable polycarbonate lens with military grade AF+AS+UV coatings, and an adjustable strap with Sure Grip Technology. Attention Customers: The Save Phace OSC Mask does not come with a Mask Stuff Bag or Phace Mask Protectant Kit. Features: Open Cell Foam Protective High Gloss Clear Coat Comes with Single Pane Lens 30 day Limited Manufacturer’s Warranty

Save Phace Phantom Mask, Diss Series $53.99 Prepare for battle with the Save Phace Phantom Mask . This uniquely designed protective face mask is made with durable, high quality plastic material that can deflect stray BBs with ease. The mask features an interchangeable polycarbonate lens with military grade AF+AS+UV coatings, and an adjustable strap with Sure Grip Technology. Attention Customers: The Save Phace Phantom Mask does not come with a Mask Stuff Bag or Phace Mask Protectant Kit. Features: Open Cell Foam Protective High Gloss Clear Coat Comes with Single Pane Lens 30 day Limited Manufacturer’s Warranty

Save Phace Scar Phace Mask, Diss Series $53.99 Strike fear into battlefield opponents with the Save Phace Scar Phace Mask . This uniquely designed protective face mask is made with durable, high quality plastic material that can deflect stray BBs with ease. The mask features an interchangeable polycarbonate lens with military grade AF+AS+UV coatings, and an adjustable strap with Sure Grip Technology. Attention Customers: The Save Phace Scar Phace Mask does not come with a Mask Stuff Bag or Phace Mask Protectant Kit. Features: Open Cell Foam Protective High Gloss Clear Coat Comes with Single Pane Lens 30 day Limited Manufacturer’s Warranty

Save Phace Voodoo Magic Mask, Dope Series $65.99 Strike fear into battlefield competitors with the Save Phace Voodoo Magic Mask . This uniquely designed protective face mask is made with durable, high quality plastic material that can deflect stray BBs with ease. The mask features an interchangeable polycarbonate lens with military grade AF+AS+UV coatings, and an adjustable strap with Sure Grip Technology. Attention Customers: The Save Phace Voodoo Magic Mask does not come with a Mask Stuff Bag or Phace Mask Protectant Kit. Features: Standard Open Cell Foam-Non Replaceable Protective Clear Coat Comes with Single Pane Clear Lens 30 day Limited Manufacturer’s Warranty

Air Venturi Intermount, Fits Benjamin Sheridan Multi-Pump Rifles $33.59 If you mounted a pistol scope on your Benjamin multi-pump but wanted to mount a rifle scope, now you can! Get this kit & mount a rifle scope in minutes! Custom-machined intermount & Picatinny rail Fits Benjamin Sheridan multi-pump rifles Easily slips on the receiver, spanning the pellet-loading area Mounts back far enough to accommodate a rifle scope 2-piece intermount mounts on receiver & included Picatinny rail attaches to the intermount Attach scope rings to the Picatinny rail Includes 2-piece aluminum intermount, 2 steel screws and Picatinny rail Scope & rings not included Fits Benjamin Sheridan multi-pumps with rounded receivers measuring .540" to .565" in diameter.

Shooting Chrony IBM/PC Interface $33.06 IBM/PC Interface is a 9-pin-female RS232 serial port to 3.5mm stereo jack. This kit includes a 4-foot patch cord with 3.5mm stereo jack plugs on both ends. One end of the patch cord plugs into the stereo jack on the Beta, Beta Master and Gamma, Gamma Master Chronys; the other end of the patch cord plugs into the stereo jack of the IBM/PC Interface. In conjunction with our Chrony Ballistics II Software, the IBM/PC Interface lets you download all of the data stored in your Chrony memory into your computer. This data can be automatically downloaded into a file on your computer for further manipulation by our Chrony Ballistics II Software programs. With Chrony Ballistics II Software, you can generate charts and graphs, calculate down-range performance, et cetera.

UTG Tactical LED Flashlight, 200 Lumens, 5 Functions, Handheld, Lanyard & Batteries $69.54 Tactical flashlight 5 functions: 3 brightness levels, strobe & SOS CREE Q5 LED 37mm integrated bulb reflector Push-button on/off tail switch Combat/tactical head Law-enforcement rated rolling stop shoulder 9V 200 max lumens (100 lumens/medium, 50 lumens/low) 1.5+ hrs battery operating time/high; 3+ hrs battery time/medium; 6+ hrs battery time/low 1.07" diameter 7.13" long 9.8 oz. Aluminum body Incl. 3 CR123A batteries & a lanyard This is a very bright light, plus the tactical bezel on the head is a great defense weapon! Put one in your glove compartment, tool box, nightstand and emergency preparedness kit. If you need a light, you’ve got it. If you need an emergency defense weapon, you’ll be glad you have the UTG Tactical LED flashlight in your hand!

Laser Genetics ND5 Laser, Green, 5-Mile Visibility $347.94 BSA Laser Genetics ND5 laser Green laser with Linear Optical Collimator Adjustable beam diameter & intensity Micro beam (smallest diameter) is visible up to 5 miles for signaling or search/rescue ops Larger-diameter beams illuminate trails or paint objects up to 400 yds away Nitrogen-filled to prevent fogging Battery has 8 hrs of continuous use Made of high-tech aluminum Anodized matte black finish 532nm laser 20mW output Class 2M Uses 2 CR123V lithium batteries (included) 9.75"x2.25" 1.20 lbs. 45mm lens diameter 1-year manufacturer’s warranty Includes 2 CR123A lithium batteries, cleaning kit & padded carrying case

BSA Varmint Hunter Precision Laser Sight & Light $47.99 Fast and very simple way to mount both a bright target illuminating light plus a fast aiming red laser to almost any scope with a 1" diameter body tube. Now you can illuminate your target under low light or zero light conditions while simultaneously directing a laser beam that will denote point of pellet strike. Easily mounts onto any 1" rifle scope with up to a 50mm diameter objective lens. Works for all small caliber rifles and all air rifles up to 1000 fps. Kit includes mounting bracket; instruction manual; hex wrench set, 3V. battery for flashlight & (3) 1.5V LR44 batteries for laser sight; remote pressure- sensitive switch and manual push button switch for both laser and flash light. Aluminum mounting bracket, laser and light bodies, black anodized finish.

Tactical LED Flashlight, 150 Lumens, 5 Functions, Handheld, Lanyard & Batteries $51.54 Tactical flashlight 5 functions: 3 brightness levels, strobe & SOS CREE Q5 LED 26mm integrated bulb reflector Push-button on/off tail switch Combat/tactical head Law-enforcement rated rolling stop shoulder 6V 150 max lumens (80 lumens/medium, 30 lumens/low) 2+ hrs battery operating time/high; 5+ hrs battery time/medium; 10+ hrs battery time/low 1" diameter 5.5" long 5.9 oz. Aluminum body Incl. 2 CR123A batteries & a lanyard This is an extremely useful and practical flashlight. If you haven’t tried one of these terrific handheld lights, you’re in for a big surprise. Not only is the light extremely bright, the tactical bezel on the head makes a dandy defense weapon! Put one in your glove compartment, tool box, nightstand and emergency preparedness kit. Women can easily fit one in their handbag. If you need a light, you’ve got it. If you need an emergency defense weapon, the UTG Tactical LED flashlight is a handy thing to have in your hand!

Laser Genetics ND3 Laser, Green, 3-Mile Visibility, Mounting Accessories $311.94 BSA Laser Genetics ND3 laser Green laser with Rotary Optical Collimator Adjustable beam diameter & intensity Micro beam (smallest diameter) is visible up to 3 miles Larger-diameter beams illuminate trails or paint targets up to 250 yds away Water-resistant Nitrogen-filled to prevent fogging 1" tube (can be mounted on a gun) Battery has 7 hrs of continuous use Made of high-tech aluminum Anodized matte black finish 532nm laser 18mW output Class 2M Uses 1 CR123V lithium battery (included) 6.25"x1.25" 5.5 oz. 1-year manufacturer’s warranty Includes 1 CR123A lithium battery, scope mount (fits 1" scope tube up to 56mm objective lens) w/windage & elevation adjustments, 3/8" & Weaver mounts, binocular/spotting scope mount (9.2mm to 6mm long; 1.25mm threads), remote momentary pressure switch, cleaning kit & padded carrying case Rated to take the 2-way recoil of airguns, including the harsh recoil of springers

Laser Genetics ND3x40 Laser Designator, 1" Tube, 3 Mounts $431.94 Laser Genetics ND3x40 Laser Designator Functions well in temperatures 40-deg. F or warmer Green laser with Rotary Optical Collimator* 40x magnification Adjustable beam diameter & intensity Micro-beam is visible up to 3 miles Wider beam illuminates trails or "paints" targets up to 400 yds away Water-resistant Nitrogen-filled to prevent fogging (o-ring sealed) 532nm laser 40mW output Class 2M Uses 2 CR123V lithium batteries 1" tube 9.45" long 2" dia. lens 12 oz. Fully multi-coated lenses Made of high-tech aluminum Anodized matte black finish Includes two 3V CR123A batteries, Weaver ring, tripod mount,1" scope mount with adj. windage & elevation, remote momentary pressure switch, cleaning kit, hex wrench, lens cap & padded case *The patented Rotary Optical Collimator uses a system of 9 fully multi-coated lenses that allow full adjustment and control of the beam diameter and intensity to focus light where it’s needed most. Rotating the collimator ring to minimum creates a bright micro-beam green laser light visible up to 3 miles. Rotating the collimator to more open settings provides plenty of illumination to light a trail at night or �paint" a target up to 400 yds. away. Attention: Do not stare directly into the laser beam or view directly with optical instruments. Viewing the laser light or a bright reflection may cause eye injury.

Laser Genetics ND3x40 Subzero Laser Designator, 1" Tube, 3 Mounts $515.94 Laser Genetics ND3x40 Laser Designator Functions well in temperatures 40-deg. F or colder Green laser with Rotary Optical Collimator* 40x magnification Adjustable beam diameter & intensity Micro-beam is visible up to 3 miles Wider beam illuminates trails or "paints" targets up to 400 yds away Water-resistant Nitrogen-filled to prevent fogging (o-ring sealed) 532nm laser 40mW output Class 2M Uses 2 CR123V lithium batteries 1" tube 10" long 2" dia. lens 12.18 oz. Fully multi-coated lenses Made of high-tech aluminum Anodized matte black finish Includes two 3V CR123A batteries, Weaver ring, tripod mount,1" scope mount with adj. windage & elevation, remote momentary pressure switch, cleaning kit, hex wrench, lens cap & padded case *The patented Rotary Optical Collimator uses a system of 9 fully multi-coated lenses that allow full adjustment and control of the beam diameter and intensity to focus light where it’s needed most. Rotating the collimator ring to minimum creates a bright micro-beam green laser light visible up to 3 miles. Rotating the collimator to more open settings provides plenty of illumination to light a trail at night or �paint" a target up to 400 yds. away. Attention: Do not stare directly into the laser beam or view directly with optical instruments. Viewing the laser light or a bright reflection may cause eye injury.

Laser Genetics ND3 Subzero Laser Designator, 1" Tube, 3 Mounts $359.99 Laser Genetics ND3 Subzero Laser Designator Functions well in temperatures 40-deg. F or colder Green laser with Rotary Optical Collimator* Adjustable beam diameter & intensity Micro-beam is visible up to 3 miles Wider beam illuminates trails or "paints" targets up to 250 yds away Water-resistant Nitrogen-filled to prevent fogging (o-ring sealed) 532nm laser 18mW output Class 2M Uses 1 CR123V lithium battery 1" tube 6.75" long 1.25" dia. lens 5.37 oz. Fully multi-coated lenses Made of high-tech aluminum Anodized matte black finish Includes one CR123A lithium battery, Weaver ring, binocular/spotting scope mount (9.2mm to 6mm long, 1.25mm threads), scope mount, remote momentary pressure switch, cleaning kit, hex wrench, lens cap & padded case *The patented Rotary Optical Collimator uses a system of 9 fully multi-coated lenses that allow full adjustment and control of the beam diameter and intensity to focus light where it’s needed most. Rotating the collimator ring to minimum creates a bright micro-beam green laser light visible up to 3 miles. Rotating the collimator to more open settings provides plenty of illumination to light a trail at night or �paint" a target up to 250 yds. away. Do not stare directly into the laser beam or view directly with optical instruments. Viewing the laser light or a bright reflection may cause eye injury.