Do you have a Tippmann 98 actions fit an Alpha Black?

A set of values Tippmann 98 custom Tippmann Alpha black?

should, if you can not mod is a little … They make stocks for the alpha black Tho so you know.

Operation Milsim Reviews: killjoy ROC Stock

Magazine, Clear, Fits R36 Rifle $9.54 Crosman magazine Clear plastic Fits R36 rifle Carry spare magazines to minimize reloading time during intense airsoft skirmish situations. This replacement magazine fits the Crosman R36 rifle exclusively.

Benjamin Katana Stock, Fits the Discovery $138 Benjamin Katana stock Fits the Benjamin Discovery Dual raised cheekpieces Slightly wider than the Discovery’s original stock Includes buttpad & replacement screw Give your Discovery a new look! This is the same stock that comes with the more expensive Benjamin Katana rifle, but you can now put it on your Disco. The raised cheekpieces will help align your eye with your scope or the open sights. Easy to install in minutes.

Front Sight, Fits Walther Lever Action Rifle $5.99 Front sight Fits Walther Lever Action CO2 rifle 1/2"L x 1/4"W x 1/4"H (including base)

Probe Adapter, Fits Shinsung & Sam Yang PCP Guns $9.59 Probe adapter fits Shinsung & Sam Yang PCP guns

KWA Magazine Charging Valve, Fits KWA Gas Blowback Airsoft Pistols $5.99 Magazine charging valve Fits KWA gas blowback airsoft pistols

KWA Nozzle Seal, Fits KWA Gas Blowback Airsoft Pistol Magazines $5.99 Nozzle seal Fits KWA gas blowback airsoft pistol magazines: M17/M18C/M19/M23F/M26C/M34

KWA Replacement Cylinder, Fits KWA ATP Gas Blowback Airsoft Pistols $10.79 Replacement cylinder Fits KWA ATP gas blowback airsoft pistols

Walther .25 Cal Rotary Clip, Fits 1250 Dominator $16.79 8-shot rotary clip .25 caliber Fits Walther 1250 Dominator

Bipod Rail, Fits UTG Master Sniper Rifle $10.74 Bipod rail Fits UTG Master Sniper rifle Steady your rifle for precise shooting during intense airsoft missions. This spare Weaver/Picatinny bipod rail by UTG attaches underneath the foregrip of your rifle and lets you attach a bipod. Pick one up for your next airsoft skirmish! ATTENTION: The mounting screws no longer come with the bipod rail.

AirForce Shoulder Stock, Fits TalonP Air Pistol $79.8 Shoulder stock Fits AirForce TalonP air pistol Adds 1/4" to 3/3" to length of pull Includes a hex wrench A great accessory for your AirForce Airguns TalonP air pistol. Just add this shoulder stock to convert it to a great little carbine. While this is a solid piece of metal, it doesn’t add much weight to the gun. Easy to attach and remove, this add-on slides over the air tank. Tighten the screws, and you’re ready to go!

Beretta Laser, Fits 92FS Pellet Pistol $31.19 Laser Fits Beretta 92FS pellet pistol Clamps under the barrel Screw mount On/off LED indicators Increase the accuracy of your Beretta 92FS CO2 pellet pistol with this laser. It slides on under the barrel and holds with clamping pressure (screws tighten the mount). Not suitable for the Beretta Elite II air pistol or any handgun that has an accessory rail under the barrel.

UTG Magazine, Fits UTG Sport U988 1911 Spring Airsoft Pistols $5.51 UTG magazine Fits UTG Sport U988 1911 spring airsoft pistols (item # LESOFT-U988BH)

RAM A-Series Paintball Rifle Magazine, Fits 47 & 74 Rifles $54 RAM A-series magazine, fits 47 & 74 rifles 23-rd mag Uses cases (not included)

RAM S-Series Paintball Rifle Magazine, Fits 11S & 13S, Black $54 RAM S-series magazine, fits 11S & 13S rifles 20-rd mag Uses cases (not included) Black

Colt M203 Grenade, Fits Colt M203 Grenade Launcher, 18 Rds $45.54 Colt M203 grenade Fits M203 grenade launcher Launches 18 BBs at once Reusable

Cybergun Drum Mag, Fits Most AEG AK47, Metal, 2500 rds $70.74 2250-round drum mag Fits most AK47 AEGs Metal shell Requires 3 AA batteries (NOT included)

Cybergun Weaver/Picatinny Mount, Fits FAMAS AEG Machine Gun $13.14 Weaver optics base with Picatinny slots Fits FAMAS AEG machine gun (CG400902)

Hammerli .177 Cal Rotary Clip, Fits 850 AirMagnum & 1250 Dominator $19.19 8-shot rotary clip .177 caliber Fits Hammerli 850 AirMagnum & Walther 1250 Dominator

Hammerli .22 Cal Rotary Clip, Fits 850 AirMagnum & 1250 Dominator $19.19 8-shot rotary clip .22 caliber Fits Hammerli 850 AirMagnum & Walther 1250 Dominator

Micrometer Rear Sight, Fits Weihrauch & Beeman HW Air Rifles $59.94 Micrometer rear sight Adj. for windage & elevation Fits Weihrauch & Beeman HW air rifles This Weihrauch micrometer rear sight fits Weihrauch and Beeman HW air rifles. If you’ve lost your original rear sight or need to replace one, get this.

909 Big Bore Probe Adapter, Fits older 909 rifles only $9.59 Probe adapter fits older Sam Yang 909 rifles. It is 1/8" BSPP male on one end and a female thread pattern on the other end, which fits the older 909 probe. It attaches to a hose that ends in a 1/8" BSPP female fitting. We suggest using Teflon tape to connect this probe to an adapter.

AirForce DIN Fill System, Fits AirForce Talon & Condor Rifles $78.6 AirForce Airguns DIN adapter Fits AirForce Talon & Condor airguns Fits any scuba tank with a DIN fitting If your scuba tank comes with a DIN fitting, get this and start filling your Talon and Condor PCP guns!

Globe Front Sight & Inserts, Fits Weihrauch & Beeman HW Air Rifles $83.99 Globe front sight 5 sight inserts Fits Weihrauch & Beeman HW air rifles Never let a lost insert spoil your shooting again! The globe front sight & inserts make it easy to take your shot in any lighting condition. Fits Beeman HW and Weihrauch air rifles.

Crosman 1399 Custom Shoulder Stock, Fits Many Crosman Pistols $31.14 Shoulder stock Easy to install, no machining req’d Fits these current models: 1377C, 2250, 2240, 2300, BP2220, PC77, 2300KT and 2400KT Fits these discontinued models: 105, 111, 130, 150, 151, 1300, 1322 and SSP250 The ultimate in versatility! Change your pistol into a carbine by attaching this lightweight, synthetic thumbhole shoulder stock.

B-Square Weaver Base, Fits RWS C225 Pistol $40.74 Weaver scope base Fits RWS C225 CO2 pistol Attaches with 1 hex screw (wrench included) Allows access to change rotary clip

Gamo Express EXP20 Shotshells, Fits Viper & Shadow Express Shotguns $9 EXP20 .22 cal. shotshell Fits Gamo Viper Express & Shadow Express air shotguns Delivers 17-grain payload of #9 shot

Smith & Wesson Weaver Rail, Fits 586 & 686 Airguns $23.94 Weaver rail Attaches with 2 screws on top of the gun Fits S&W 586 & 686 CO2 revolvers ideal for attaching scopes, red dots & lasers

ARH Piston Seal, Fits Webley Patriot And Beeman Kodiak Air Rifles $26.7 ARH piston seal Fits Webley Patriot & Beeman Kodiak air rifles If your piston seal is worn or cut, this is the proper replacement part.

Replacement Probe, Fits Older AR6 & Renegade PCP Airguns $23.06 Probe for filling air reservoir Fits Evanix AR6 Hunting Master rifle and pistol & Renegade rifle Fits older models Does NOT fit any other Evanix rifle or pistol (Blizzard, carbines, Speed, Conqest, Max, etc.) Own an older AR6 or Renegade? The newer models use a longer probe. This probe fits the earlier models, which require a shorter air fill probe. Get the right probe for your air gun.

Walther Flanger Main Valve, Fits Walther Lever Action Air Rifles $21.54 Flanger main valve Fits Walther Lever Action air rifles You may need one of these to repair your Walther Lever Action air rifle!

Air Arms Degassing Tool, Fits Air Arms S200 Air Rifles $21.54 Degassing tool Fits S200 air rifles Need to get rid of the high-pressure air in your Air Arms S200 air reservoir? This degassing tool will help you do it safely and quickly.

Centra Rear Sight, Adjustable Aperture, Fits 3/8" or 11mm Dovetail $522.58 Centra rear sight Peep (aperture) sight Precision adjustments for windage & elevation Fits 3/8" or 11mm dovetail Superior quality, superior sight! Attaches with hex screws Incl. Allen wrench and manual

Airforce Edge Extra Air Tank, Fits Airforce Edge Air Rifles $164.34 Airforce Edge air tank Fits Airforce Edge air rifles Easily, quickly swap tanks on your Edge by loosening one screw in the buttstock assembly.

Walther Accessory Rail, Fits Walther PPQ Air Pistol $20.39 Walther accessory rail Fits Walther PPQ air pistol Mount a scope or dot sight on your Walther PPQ air pistol and home in on your target.

Creedmoor Sports Open Finger Shooting Glove, Fits Left Hand, Large $53.47 Left-hand glove for right-handed shooters Creedmoor Sports open finger shooting glove Cross slot on the back for better flexibility Meets ISSF and NRA rules Fits the left hand Large

Creedmoor Sports Open Finger Shooting Glove, Fits Left Hand, Medium $53.47 Left-hand glove for right-handed shooters Creedmoor Sports open finger shooting glove Cross slot on the back for better flexibility Meets ISSF and NRA rules Fits the left hand Medium

Creedmoor Sports Open Finger Shooting Glove, Fits Right Hand, Large $53.47 Right-hand glove for left-handed shooters Creedmoor Sports open finger shooting glove Cross slot on the back for better flexibility Meets ISSF and NRA rules Fits the right hand Large

Creedmoor Sports Open Finger Shooting Glove, Fits Right Hand, Medium $53.47 Right-hand glove for left-handed shooters Creedmoor Sports open finger shooting glove Cross slot on the back for better flexibility Meets ISSF and NRA rules Fits the right hand Medium

Feinwerkbau Sliding Weight, 2 Rods, Fits P44 Air Pistols $71.99 Sliding weight with 2 rods 60 grams Fits P44 air pistols (including the P44 short) Need extra weight? Get these 60-gram sliding weights with rods for your FWB P44 air pistol.

Walther Bridge Mount, Fits Walther CP99 & CP Sport Pistols $35.99 Bridge mount Fits Walther CP99 & CP Sport CO2 guns Mount a scope or red dot on your gun This is an 11mm dovetail! To mount Walther’s optics, you’ll need their Weaver rail, which attaches to the 11mm dovetail on this bridge mount.

UTG Claw Mount, Fits Echo1 Sub Guns $29.94 Limited Lifetime Warranty New Gen claw mount with double Picatinny rails and STANAG spec Creative 1-piece integral Picatinny double rails. Accepts scopes, tactical flashlights and lasers.

AirForce End Cap, Fits Talon SS or Condor $17.94 AirForce end cap Comes standard on Talon SS Use with 12" barrels in .177, .20 or .22 caliber Strips away turbulent air for quieter report Note: Condor report cannot be reduced to the same degree as the Talon SS

Competition Electronics Debris Shield, Fits ProChrono Chronographs $21.59 Debris shield Clear Lexan cover Covers the front & top of any ProChrono chronograph Incl. guide wires to secure shield Accidents happen, so be proactive and protect the display and top of your ProChrono digital chronograph with this Lexan debris shield.

Competition Electronics Digital Remote, Fits ProChrono Chronographs $83.99 Digital remote Works with all ProChrono digital chronographs Connects to Windows computers via the serial port Download shot velocities and statistics to your PC via HyperTerminal in Windows* Powered by a 9V alkaline battery (not included) For use with Prochrono digital chronographs Incl. 20-ft cable to extend the remote to your shooting bench To determine if your computer can hook up to the remote unit, read the owner’s manual available on this page *You can use this with Macintosh or Linux computers, but you’ll need to get a terminal program specifically designed to use with those operating systems. Can you see your chronograph’s display from your shooting bench? If not, then this remote unit will close the distance by bringing the display to you.

Degassing Tool, Fits Benjamin Marauder Air Rifle $17.7 Degassing tool Removes air or CO2 from the Marauder’s reservoir Fit the Benjamin Marauder rifle (does not fit the Marauder pistol) If you need to release air from an overfilled Benjamin Marauder PCP rifle, the degassing tool will make the process a snap. Please refer to your air rifle’s manual for detailed use instructions.

Air Arms Cocking Aid, Fits TX200 $19.19 Cocking aid for TX200 Makes it easier to grasp the underlever Quickly, easily attaches; no machining required

Shooting Chrony Remote, Fits Beta & Gamma Chronys $26.34 Remote control switch has 2 buttons to operate all the functions on your Beta & Gamma Chronys. Just insert one plug into the left side of your Chrony and other into the bottom of your remote & you’re good to go!

Shooting Chrony Remote, Fits F-1 & Alpha Chronys $21.54 Corded remote makes it easier to turn things on & off. Just insert one end of the plug into the left side of the Chrony and the other plug into the bottom of the remote & you’re good to go! It also turns your F1 Chrony into an Alpha Chrony, giving you these added features/benefits: 1 string of 32 shots High and low velocities Average velocity Extreme spread Standard deviation

JB Unicorn Barrel Extension, Fits AR AEG Rifles, 9.5" $57.54 Barrel extension 14mm counter clockwise thread 9.5" This 9.5" long profile barrel extension by JBU fits all airsoft rifles with 14mm counterclockwise thread. The barrel extension can be used with standard M4 length outer barrels. For airsoft use only.

Piston Seal, Fits Gamo Whisper & Gamo Big Cat $13.14 Piston seal Fits Gamo Big Cat 1200 or 1250 and Gamo Whisper (all models) Sometimes, seals in your spring-piston air rifle need to be replaced due to a variety issues. If you need a replacement for your Gamo Big Cat or Gamo Whisper air gun, this is the correct part!

Piston Seal, Fits Walther Falcon Hunter & Walther Talon Magnum $13.14 Piston seal Fits Walther Falcon Hunter and Walther Talon Magnum Spare part for either Walther spring-piston air rifle. Sometimes, gun blow seals or the seals are cut due to becoming dislodged. This is the correct replacement part for your air gun.

Eun Jin Check Valve Assembly, Fits Sumatra Air Rifle $23.94 Check valve assembly Fits Sumatra air rifle Original replacement part from Eun Jin Most people don’t need a new check valve assembly for their Eun Jin Sumatra air rifle. But, if you do, use this one. It’s made by Eun Jin, the original manufacturer.

Eun Jin Cocking Lever Screw, Fits 909S Air Rifle $2.34 Cocking lever screw Fits 909S air rifle Original replacement part Did you lose the cocking lever screw on your Sam Yang 909S air rifle? Replace it with this one made by Eun Jin, a subsidiary of Sam Yang.

Eun Jin Fill Port Assembly, Fits Sumatra Air Rifle $21.54 Fill port assembly Fits Sumatra air rifle Original replacement part from Eun Jin Did you damage the fill port on your Sumatra air rifle? Replace it with this one made by Eun Jin, the original manufacturer.

Hammerli Pneuma Extra Air Tank, Also Fits HaleStorm & AT44PA Rifles $131.99 Don’t carry a scuba tank or pump when you go hunting or plinking! Carry an extra tank that you filled up at home! It’s lighter than fill devices and will let you keep shooting instead of filling. Fits the Hammerli Pneuma, Air Venturi HaleStorm and Hatsan AT44PA air rifles.

Air Arms Air Tank, Fits S200/T200 Air Rifles with Removable Tanks $143.94 Air tank Fits Air Arms S200/T200 air rifles with removable tanks If your Air Arms S200/T200 air rifle has a removable tank, this extra tank will be real convenient. Instead of carrying a pump or scuba tank plus the fill adapters, just fill up another tank and take it with you.

Gamo Gun Sock, Cotton & Spandex, Fits Most Long Guns $8.34 Gamo gun sock Stretchy cotton and spandex Helps guard against dirt, dust, scratches and rust Lightweight & durable Gamo logo One size fits most long guns Gun socks are your first line of defense against damage. Put these on your firearms, air guns and airsoft guns.

Hawke Sport Optics Bubble Level, Fits 9-11mm Dovetails $20.39 Bubble level Fits 9mm to 11mm dovetails Helps you level your gun & scope for maximum accuracy If your gun isn’t as accurate as you think it should be, attach this bubble level and watch where the bubble sits when you’re ready to shoot. If it’s not plumb center, that might be the cause of your problems.

KWA KM4A1 Magazine, Fits KWA KM4A1 AEG Rifles, 350 Rds $29.88 KM4A1 rifle magazine Fits KWA KM4A1 AEG rifles 350 rds Own a KWA KM4A1 airsoft rifle? This high-capacity 350 rd magazine by KWA lets you concentrate on your battlefield targets without worrying about constantly reloading. Pick up this spare magazine today!

Air Venturi Thumbhole Stock, Fits Older AirForce Rifles & Tanks $47.99 Thumbhole stock Fits older AirForce Airguns Condor, Talon & Talon SS rifles & tanks* Easily attaches to gun’s pistol grip & high-pressure air tank buttplate (does not fit CO2 tank) No machining required *Does not fit the newer AirForce guns or tanks with the Spin-Loc feature.

ASG Magazine, Fits STI Duty One BB Pistols $11.94 Magazine Fits STI Duty One CO2 BB pistol Holds 20 steel BBs Carry some preloaded spare mags for your air pistol so you can shoot more without interruption.

Feinwerkbau Compressed Air Cylinder, Fits P44 Air Pistol $323.99 Compressed air cylinder Fits P44 air pistol Does NOT fit the P44 short Instead of toting fill devices for your FWB P44 air pistol, just fill your tank at home. No pumping, no hoses…just screw in and start shooting. This does not fit the P44 short air pistol.

Benjamin CO2 Fill Adapter, Fits Discovery, Marauder & Challenger $43.19 CO2 fill adapter Fits Benjamin Discovery & Marauder and Crosman Challenger C GA-320 fitting with .825×1/4 thread, 8" stainless steel hose, female Foster fitting Use with CO2 paintball tanks Do not use for filling gun with pressurized air

Mag, .177 Cal, 10rds, Fits HaleStorm, Pneuma, BS65SB & AT44PA Rifles $16.79 .177 caliber 10rd mag Fits Hammerli Pneuma, Air Venturi HaleStorm, and Hatsan AT44PA and BS65SB rifles Leave the rattling pellet tins at home! Load up several mags before you go out to the field and spend your time shooting, not reloading.

Mag, .22 Cal, 10rds, Fits HaleStorm, Pneuma, BS65SB & AT44PA Rifles $16.79 .22 caliber 10rd mag Fits Hammerli Pneuma, Air Venturi HaleStorm, and Hatsan ATPA44 and BS65SB rifles Leave the rattling pellet tins at home! Load up several mags before you go out to the field and spend your time shooting, not reloading.

BKL 12-Way Folding Scope Level, Fits 30mm dia. Scope Tube $39.9 12-way scope bubble level Fits 30mm dia. scope tube Easy installation Eliminate cant with BKL’s 12-way scope bubble level. Position the level above, below or off to the side depending on your needs. Reference the level before taking your shot, reposition your gun so it’s level and then shoot. You should see a difference in accuracy, as a canted gun is not accurate. Included ring fits any 30mm scope tube. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

Air Venturi Intermount, Fits Benjamin Sheridan Multi-Pump Rifles $33.59 If you mounted a pistol scope on your Benjamin multi-pump but wanted to mount a rifle scope, now you can! Get this kit & mount a rifle scope in minutes! Custom-machined intermount & Picatinny rail Fits Benjamin Sheridan multi-pump rifles Easily slips on the receiver, spanning the pellet-loading area Mounts back far enough to accommodate a rifle scope 2-piece intermount mounts on receiver & included Picatinny rail attaches to the intermount Attach scope rings to the Picatinny rail Includes 2-piece aluminum intermount, 2 steel screws and Picatinny rail Scope & rings not included Fits Benjamin Sheridan multi-pumps with rounded receivers measuring .540" to .565" in diameter.

KWA H&K AEG Magazine, Fits G36C Airsoft Rifles, 430 Rds $27.54 KWA H&K AEG magazine Fits G36C airsoft rifles, AEG only Not compatable with dual power G36C 430 rds Spare magazines are essential for extended airsoft skirmishes. This high-capacity 430 rd magazine by KWA is great to carry in the battlefield. Pick up one for your G36C airsoft rifle today!

Benjamin Hand Pump, Fits Crosman & Benjamin PCP Guns $214.8 3-stage hand pump Made specifically for the Crosman/Benjamin PCP pistols & rifles (fits any brand of PCP gun with a male Foster quick-disconnect on its reservoir) Includes a female Foster quick-disconnect on the end of the pump hose Goes up to 3600 psi (although some of the guns listed above operate on a max pressure of 2000 or 3,000 psi) With other hoses, pump can be adapted to other PCPs Requires less effort than other pumps Integral air pressure gauge Moisture filter

Competition Electronics Replacement Diffuser Pack, Fits ProChrono Chronographs $13.14 ProChrono replacement diffuser pack 4 replacement guide wires 2 replacement diffuser hoods Fits all ProChrono chronographs No matter how careful you are, you may have shot the diffuser hoods or guide wires on your ProChrono chronograph. No worries…get this replacement pack, and you’re good to go. Use with air guns, firearms and airsoft guns.

Replacement Air Reservoir, Fits Feinwerkbau P700 Air Rifles $387.46 Feinwerkbau replacement air reservoir Built-in manometer (air pressure gauge) 2900 psi max air pressure (200 bar) Fits all Feinwerkbau P700 PCP air rifles Instead of carrying a bulky fill tank or a hand pump, take along a spare air reservoir. Fill it up before your match and avoid lugging extra baggage. Same high-quality construction as the original tank that came with your FWB P700 air rifle.

Umarex Universal Tactical Laser, Fits Weaver/Picatinny Accessory Rail $20.34 Umarex universal tactical laser Class IIIA laser Fits any Weaver/Picatinny accessory rail 650nm wavelength

AirForce CO2 Adapter, Fits Condor, Talon & Talon SS $119.94 Fits all Condor, Talon and Talon SS rifles Over 1,000 shots per CO2 tank Ideal for shooting indoors Easy to switch back to air No handpump or scuba tank required Quieter operation How to switch from high-pressure air to CO2: Unscrew your AirForce air tank from your rifle Screw in the CO2 adapter into your rifle Screw in the filled tank into the other end of the adapter Start shooting!

AirForce Quick-Detach Air Tank, Fits TalonP Air Pistols $159.6 Quick-detach air tank Fits TalonP air pistols Can be used with compressed air or dry nitrogen gas only 6.125" long Need some extra air? Don’t carry refill equipment! Get a spare tank, fill it up at home & take it with you. Simply swap the filled tank for the empty one, and you’re good to go.

Walther Weaver Rail, Fits Walther CP99 & CP Sport Pistols $13.14 Weaver rail for Walther CP99 or CP Sport CO2 pistols For mounting pistol scopes & dot sights Includes Allen wrench & all mounting items To mount a scope or dot sight on a Walther CP99 or CP Sport, you’ll also need the Walther Bridge Mount

Target Shooters Hand Stop, Fits 10-Meter Rifles & Firearms $27.54 Hand stop Easily screws into the underside of your rifle’s forearm Can be used with 10-meter rifles* with appropriate screw holes in the forearm *Fits these air rifles: Air Arms MPR, Anschutz 9003, FWB 700, Daisy 887 Gold and Daisy 888 Medalist. Need a place to rest your hand when you shoot? Insert this hand stop and slide your hand forward to rest on it. An easy way to have a repeat hold while giving you extra support.

Leapers Model 4/15 Scope Mount, Fits Carry Handle $21.54 Weaver mount Fits Model 4/15 carry handle 1" rings 3 adjustable mounting positions for flexible eye relief positioning Flattop adapter with 2 thumbscrews & clamping plate 4 screws per ring cap Made of aircraft-grade aluminum Tight tolerances create a solid fit for extreme tactical environments

Smith & Wesson Magnum Series Yellow Lens Safety Glasses, Fits Kids $9.59 Fits kids! The Magnum Series safety glasses are ergonomically dimensioned for a 3 point fit, the ultimate in comfort. Reduced size for smaller adults and youth. Comes in a Black Frame with Yellow Lens. Exceeds ANSI Z87.1 safety standards Provides maximum UV protection Ergonomic nose pad w/ self-adjusting rubber fingers Built-in hinge stops Polycarbonate safety glasses protect your eyes from impact, but the glasses deteriorate due to scratches, light, etc., and should be replaced after 2 years.

Concealed Ankle Holster, Fits Compact & Subcompact Pistols, Black $11.94 UTG concealed ankle holster Fits compact & sub-compact pistols Padded polyester won’t mar gun’s finish Padded wraparound ankle & calf straps adjust with hook-and-loop close Thumb break 0.4 lbs Black Although this is made for concealed carry for firearms, airsoft shooters can also use this UTG ankle holster. If you’re captured during a skirmish, you can keep a hidden airsoft sidearm in this holster for a surprise attack behind enemy lines.

Air Venturi 9.6V Battery, Fits Evanix Speed, Conquest & Max Airguns $35.99 8-cell battery pack 9.6 volts 5 hrs to fully charge Fits Evanix Speed, Conquest and Max air guns The Evanix 9mm Conquest air rifle uses an 8-cell 9.6V battery pack. This spare battery pack is shipped uncharged. You can also use this battery with your Speed or Conquest air rifles; in cold weather, it provides improved performance over the stock 7-cell 8.4V battery pack.

1911A1 S 8rd Blank Mag, Fits Colt & S&W Blank Pistols $16.79 8-rd mag Fits Colt Government 1911A1 S & S&W 1911 S blank guns Holds 9mm PAK blank ammo only Use only blank ammo Use only in the indicated blank-firing gun Will not accept live ammo rounds Will not properly feed any type of ammo in a firearm

BSA Single-Shot Adapter, .177 Cal, Fits R-10, Scorpion, Ultra $41.99 Single-shot adapter .177 cal Fits BSA R-10, Scorpion and Ultra air rifles If you prefer to shoot your BSA repeating air rifle as a single-shot, this adapter is what you need. Many airgunners prefer single-shots because they feel it gives them better control. Also, single-shot guns tend to be more accurate than repeaters.

BSA Single-Shot Adapter, .22 Cal, Fits R-10, Scorpion, Ultra $41.99 Single-shot adapter .22 cal Fits BSA R-10, Scorpion and Ultra air rifles Your BSA multi-shot air rifle can be shot with single pellets if you prefer. Just pop in this adapter, load a pellet and you’re off! Some airgunners feel that single-shot air guns offer better accuracy. Try it both ways and see what works best for you.

Competition Electronics Indoor Lighting System, Fits ProChrono Chronographs $71.99 Indoor lighting system Fits all ProChrono digital chronographs Provides optimum performance indoors or in low light Portable & fast setup Patented electronic design eliminates the need for light bulbs Red LED "on" indicator lights 120V AC 60Hz adapter input 24V DC 200 mAh adapter output 200 mAh power consumption 120V AC adapter* included *Can also operate on a 24V DC power source, such as two 12V batteries wired in a series. Whether you shoot indoors or out, you’ll need this supplementary lighting kit at some time. It’s a good idea to have it on hand right from the start.

Concealed Belt Holster, Fits Compact & Subcompact Pistols, Black $9.54 UTG concealed belt holster Fits compact & sub-compact pistols Padded polyester won’t mar gun’s finish Front arch design to easily reholster Elastic thumb break Clip slips over belt/waistband 0.2 lbs Black 6.75" deep 3.5" wide tapers to 2.3" For concealed carry for firearms. Also useful for airsoft shooters who want to conceal an airsoft pistol during skirmishes. Clip this onto your belt to stow a spare sidearm the other side can’t see!

Foregrip, Low Profile, Lever Lock, Fits Weaver/Picatinny Rail $35.94 Leapers UTG foregrip Low profile Lever lock Fits any Weaver/Picatinny rail Quick-detach adj. lever Waterproof O-ring on end cap protects storage area Aircraft-grade aluminum alloy Folds and locks in 2 positions Spring-tensioned Posi-lock Easy installation 1.04 cu in storage space 4.6" high 9.7 oz. Incl. hex wrench Attach this Leapers foregrip to any airgun, firearm or airsoft gun that has a Weaver/Picatinny rail. Secure it in seconds. Folds out of the way when you don’t need it. Sturdy, durable, useful.

Air Venturi CO2 Bulk-Fill Adapter, Fits Umarex EBOS $23.99 Air Venturi CO2 bulk-fill adapter Fits Umarex EBOS Screw the adapter into the CO2 port of the EBOS With the adapter securely attached, screw a paintball CO2 bulk-fill tank (12 oz. recommended) into the adapter (see note below) Extremely economical…more shots, less money EBOS buttstock cannot be attached when you use this bulk-fill CO2 adapter NOTE: The paintball tank valve will immediately open when it’s completely screwed into the adapter. Make sure the adapter is tightly/securely installed in the gun before the tank is tightened down.

Crosman Pistol Magazine, Fits Crosman C41 BB Pistol, .177 Cal, 18 Rds $10.74 Crosman C41 pistol magazine Fits Crosman C41 BB pistol Holds 18 steel BBs (not airsoft BBs) 1 per pack Fits the Crosman C41 BB pistol. Does not fit the C41 airsoft pistol.

Competition Electronics Digital USB Interface, Fits ProChrono Chronographs $89.99 Digital USB interface Fits all ProChrono digital chronographs Works with Windows 98, Windows 2000, Windows XP, Windows Vista & Windows 7 operating systems Measure velocities from multiple ProChrono digital chronographs with one PC Control panel handles all chronograph functions Read velocities from each shot string Calculate ammo, power factor & ft-lbs Export shot data & statistics to CSV and other delimited formats for use in spreadsheet programs On-screen graph of velocity strings Uses a USB computer port for a wired connection to the chronograph Computer keyboard is necessary but the mouse is optional Incl. USB adapter interface, 25-ft connection cable & program CD What a great way to string together several chronographs to quickly gather data! Especially useful for matches where maximum velocities are enforced, such as field target events.

Crosman Nitro Piston Conversion, Fits Many Newer Gamo Rifles $131.99 Pyramyd Air MUST install the Nitro Piston in your gun. It cannot be sold for customer installation. You will be charged shipping during the checkout process. That’s the charge to send your gun back to you after installation. Send your airgun to: Crosman Nitro Piston Installation 18370 S. Miles Road Warrensville Heights, OH 44128 The perfect upgrade for your Gamo Whisper air rifle. Crosman Nitro Piston conversion Fits Gamo Whisper-series, Hunter Sport, Varmint Hunter, Big Cat & Shadow Sport made in 2010 or later! Maintains same velocity as the metal spring Smoother cocking Smoother shooting No spring torque No spring fatigue, even if you leave it cocked for hours Functions perfectly in cold weather Lasts longer than a metal spring Installation is included in the price! All internal parts removed for this conversion will be sent back with your gun

Laserlyte Mini Laser Bore Sight, Fits .17 to .22 Cal Guns $71.99 Laserlyte laser bore sight Fits .17 to .22 caliber guns (air rifles, air pistols and firearms) Requires minimum 3" barrel (the owner’s manual incorrectly states that you need a min. 4" barrel) 6061 T6 aluminum 650nm laser module Class IIIA laser 5mw power output Includes three 393 batteries 500-yd range at night 1.5 hrs battery life (constant on) Do not use on guns that have muzzlebrakes, silencers, fake silencers, shrouds or noise dampeners. Stop wasting time and ammo manually sighting-in targets. A Laserlyte mini laser bore sight will get your shots within 3 to 4 inches of the bullseye within a couple shots at 100 yards. Air rifles, air pistols and rimfires with at least a 3-inch barrel can use the Laserlyte mini laser bore sight. The batteries come installed in the bore sight.

Career Replacement Probe, 1/8 BSPP, Fits Shinsung/Career, Sumatra & Sam Yang Rifles $22.8 1/8 BSPP replacement probe Fits Shinsung/Career rifles, Eun Jin Sumatra rifles & Sam Yang rifles

AEG Airsoft Submachine Gun Magazine, Fits H&K MP5 A4 Airsoft Submachine Guns, 40 Rds $21.54 AEG submachine gun magazine Fits H&K MP5 A4 airsoft submachine guns 40 rds

Air Venturi Muzzle Protector, Fits AirForce Condor & Talon Bounty Hunter, 1/2"x28 TPI $15.59 Muzzle protector Fits AirForce Condor & Talon Bounty Hunter guns 1/2"x28 threads per inch

RAM R-Series Paintball Rifle Magazine, Fits 1R, 2R & 7R Rifles, Black $54 RAM R-series magazine, fits 1R, 2R & 7R rifles 20-rd mag Uses cases (not included) Black

RAM S-Series Paintball Rifle Magazine, Fits 11S & 13S, LE Blue $54 RAM S-series magazine, fits 11S & 13S rifles 20-rd mag Uses cases (not included) Law-enforcement blue

KWA Magazine Base Lock Seal, Fits KWA Gas Blowback Airsoft Pistol Magazines $5.75 Magazine base lock seal Fits KWA gas blowback airsoft pistol magazines: M17/M18C/M19/M23F/M26C/M34

Crosman Nitro Piston Conversion, Fits Many Older Gamo Rifles $131.99 Pyramyd Air MUST install the Crosman Nitro Piston in your gun. It cannot be sold for customer installation. You will be charged shipping during the checkout process. That’s the charge to send your gun back to you after installation. Send your airgun to: Crosman Nitro Piston Installation 18370 S. Miles Road Warrensville Heights, OH 44128 The perfect upgrade for your Gamo air rifle. Crosman Nitro Piston conversion Fits Gamo Whisper-series, Hunter Sport, Varmint Hunter, Big Cat & Shadow Sport made in 2009 or earlier and the Tech Force 89 and 99 air rifles Maintains same velocity as the metal spring Smoother cocking Smoother shooting No spring torque No spring fatigue, even if you leave it cocked for hours Functions perfectly in cold weather Lasts longer than a metal spring Installation is included in the price! All internal parts removed for this conversion will be sent back with your gun Remove the buzz, twang and vibration from your spring rifle. Gas springs are known for their reliability and durability.

WE Green Gas Magazine, Fits WE SDWE35 Series Green Gas Airsoft Pistols, Silver $32.39 Green gas magazine Fits SDWE35 green gas airsoft pistols Silver Carry this spare magazine in the pouch of your tactical vest and minimize time spent reloading your gun. This silver clip fits WE SDWE35 green gas airsoft pistols exclusively.

Sig Sauer Pistol 12 Rds Magazine, Fits Sig Sauer P226 Spring Airsoft Pistol item # CG28114 $11.94 Sig Sauer pistol magazine Fits Sig Sauer P226 spring airsoft pistol Item#:CG28114 12 rds Own a Sig Sauer P226 pistol? This 12 rd replacement magazine fits the spring-powered P226 airsoft pistol exclusively. Carry this spare magazine for your next airsoft skirmish!

Walther Scope Base, Fits Lever Action CO2 Rifle, 11mm Dovetail & Weaver $35.99 Fits Walther Lever Action CO2 rifle Attach either Weaver mounts or 11mm dovetail rings to this base Ideal for attaching a scope or dot sight

RAM R-Series Paintball Rifle Magazine, Fits 1R, 2R & 7R rifles, LE Blue $54 RAM R-series magazine, fits 1R, 2R & 7R rifles 20-rd mag Uses cases (not included) Law-enforcement blue

Evanix Replacement Probe, Fits Newer Evanix Renegade Carbine, Rainstorm, Blizzard, Speed & Max Air Guns $23.99 Probe for filling air reservoir Fits Evanix Renegade carbine (NOT the long gun), Rainstorm and Blizzard long guns, Speed rifle and Max bullpup Fits newer models only Does NOT fit Evanix Renegade long gun or any other gun except for those listed above Own a newer Evanix airgun that uses a probe to fill the reservoir? The newer models use a longer probe. This probe fits them.

AirForce Front Target Sight, Fits Most 10-Meter 3-Position Rifles + All AirForce Guns $46.8 Front target sight Fits most 10-meter 3-position rifles & all AirForce airguns Accepts standard European aperture inserts (not included) Large amount of vertical adjustment Made in America

Air Arms Fill Adapter, Fits Air Arms Rifles w/Detachable Tanks $35.94 Fill adapter Fits Air Arms airguns with removable tanks Connects to a female DIN thread If you’ve lost the fill adapter for your Air Arms airgun, here’s a replacement adapter.

Airforce Edge Spare Tank & Buttstock Assembly, Fits Airforce Edge Air Rifles $204.3 Airforce Edge tank & buttstock assembly Fits Airforce Edge air rifles The Edge Spare Tank with Buttstock assembly provides complete back up for the big match or an extended shooting session.

Harris Sling & Bipod Adapter, Fits Air Arms S200 Target & Crosman Challenger Rifles $23.99 Adapter for sling or bipod attachment Fits bottom rail of S200 Target air rifle & the Challenger’s bottom rail on the forestock (with a sling/bipod adapter) Ideal for 10-meter shooters

Walther Combi Rail, Fits CP88, Beretta 92FS & Colt CO2 Pistols, 11mm Dovetail & Weaver Rail $33.07 11mm dovetail & Weaver (22mm) rail Securely fastens with 2 screws Black matte finish Fits Walther CP88, Beretta FS92 & Colt CO2 pellet guns (these are guns with removable rear sights)

Umarex Compensator, Fits Hammerli 850, Walther 1250 Dominator & Beretta CX4 Rifles $47.99 Rifle compensator Fits RWS 850 AirMagnum, Walther 1250 Dominator (do not use on .25 cal gun) and Beretta CX4 Storm Friction fit Set screw secures compensator to barrel

King Arms M4A1 Airsoft Rifle Magazine, Fits Colt M4A1 Gas Blowback Airsoft Rifles, 50 Rds $51.54 M4A1 magazine Fits Colt M4A1 gas blowback airsoft rifles 50 rds Carrying spare magazines lets you spend less time reloading during intense airsoft skirmishes. This 50 rd magazine fits the Colt M4A1 gas blowback airsoft rifle exclusively. Pick one up today!

KWA Gas Blowback Magazine, Fits All M9 Series NS2 Gas Blowback Airsoft Pistols, 48 Rds $51.54 KWA gas blowback magazine Fits all M9 Series NS2 GBB airsoft pistols 48 rds This gas blowback magazine by KWA fits the NS2 equipped M9 series green gas airsoft pistols exclusively. An extended 48 rd capacity lets you spend more time shooting and less time reloading during intense airsoft wars. Pick one up today!

KWA Gas Blowback Pistol Magazine, Fits M9 Series NS2 Gas Blowback Airsoft Pistols, 32 Rds $45.54 KWA gas blowback pistol magazine Fits M9 series (M9 PTP/M9PTP-T) NS2 GBB airsoft pistols 32 rds Carrying spare magazines lets you spend less time reloading in the battlefield. This gas blowback magazine by KWA fits M9 series gas blowback airsoft pistols exclusively. Pick one up for your next airsoft skirmish!

KWA Gas Magazine, Fits KWA ATP Adaptive Training GBB Airsoft Pistol, 23 Rds $39.54 KWA gas magazine Fits KWA ATP Adaptive Training GBB Airsoft Pistol 23 rds Spend more time shooting by carrying spare magazines in the battlefield. This full metal gas magazine by KWA fits the KWA ATP gas blowback airsoft pistol. The magazine holds 23 rds and is great for extended airsoft skirmishes, pick one up today! NOTE: The image of the magazine shown on the product page is not representative of how the magazine actually looks. It will look slightly different when you receive it.

KWA Gas Magazine, Fits KWA M226 NS2 Gas Blowback Airsoft Pistol, 23 Rds $39.54 KWA gas magazine Full metal Fits KWA M226 NS2 gas blowback pistol 23 rds Spend more time shooting by carrying spare magazines in the battlefield. This full metal gas magazine by KWA fits the KWA M226 gas blowback airsoft pistol. The magazine holds 23 rds and is great for extended airsoft skirmishes, pick one up today!

KWA Green Gas Magazine, Fits KWA M11A1 SMG Submachine Gun, 48 Rds $39.54 KWA green gas magazine Fits M11A1 SMG submachine guns 48 rds Pick up this replacement KWA magazine for your SMG submachine gun. This spare 48 rd magazine fits KWA’s M11A1 SMG submachine gun exclusively. Spend more time shooting and less time reloading during intense airsoft skirmishes!

AirForce Adaptive Rear Target Sight, Fits Most 10-Meter 3-Position Rifles & All AirForce Guns $164.34 Adaptive rear target sight Fits most 10-meter 3-position rifles & all AirForce guns Large amount of vertical adjustment Fits 11mm airgun rail Has 1/8 MOA click adjustment knobs & can be reset to zero Can be removed from its mounting base & clamped into a 1" scope ring Made in America

Magnum Research Desert Eagle Magazine, Fits Desert Eagle CO2 Airsoft Pistols, .50 Cal, 21 Rds $35.94 Desert Eagle magazine Fits CO2 powered Desert Eagle airsoft pistols (CG90502 and CG90502) .50 cal 21 rds Own a Desert Eagle CO2 powered airsoft pistol? Don’t run out of ammo during intense airsoft skirmishes. This .50 cal spare magazine by Desert Eagle fits CO2 powered Desert Eagle airsoft pistols exclusively. Buy an extra magazine so you can reload faster! Magazine holds 21 BBs.

Metal Bipod, Fits SD98 & Echo 1 A.S.R. Spring Airsoft Sniper Rifles $39.54 Metal bipod Fits SD98 & Echo 1 A.S.R. spring airsoft sniper rifles Steady your sniper rifle for accurate shooting with this TSD bipod. The bipod is full metal and fits the SD98 & Echo 1 A.S.R. spring-powered airsoft sniper rifles. Pick one up for your next airsoft skirmish!

Sig Sauer CO2 Airsoft Pistol Magazine, Fixed Slide, Fits Sig Sauer SP2022 CO2 Airsoft Pistols $29.94 15rd CO2 airsoft pistol magazine Fixed slide Fits SIG Sauer SP2022 CO2 airsoft pistols Spend more time shooting and less time reloading in the battlefield. This spare SIG Sauer magazine holds 15 rds and fits the SIG Sauer SP2022 CO2 airsoft pistol exclusively. Pick up this spare magazine today!

BKL 12-Way Scope Bubble Level, Fits 1" dia. Scope Tube $39.9 12-way scope bubble level Fits 1" dia. scope tube Easy installation This 12-way folding scope level by BKL is easy to install and eliminates cant. Position the level above, below or off to the side depending on your needs. By eliminating cant, your accuracy will improve. Included ring fits any 1" scope tube. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

WE Green Gas Magazine, Fits WE SDWE35 Series Green Gas Airsoft Pistols, Black $32.39 Green gas magazine Fits SDWE35 green gas airsoft pistols Black Carrying spare magazines is a great way to minimize time spent reloading in the battlefield. This magazine fits WE SDWE35 green gas airsoft pistols and is easily concealable in the pouch of your tactical vest. Pick up a couple of these spare clips for your next airsoft skirmish!

Tanfoglio CO2 Airsoft Pistol Magazine, Fits Tanfoglio Limited & Limited Custom Airsoft Pistols $45.54 CO2 airsoft pistol magazine Fits Tanfoglio Limited & Limited Custom CO2 blowback airsoft pistols (item# 350500 & 350501) Pick up this spare Tanfoglio airsoft pistol magazine for fast reloading during shooting competitions. This full metal magazine fits the Tanfoglio Eric Grauffel signature Limited & Limited Custom CO2 blowback airsoft pistols exclusively.

AirForce Adaptive Target Sight Set, Fits Most 10-Meter 3-Position Rifles & All AirForce Guns $205.2 Adaptive target sight set (front & rear sights included) Fits most 10-meter 3-position rifles & All AirForce guns Front sight accepts standard European aperture inserts (not included) Both sights have large amount of vertical adjustment Rear sight fits 11mm airgun rail Rear sight has 1/8 MOA click adjustment knobs & can be reset to zero Rear sight can be removed from its mounting base & clamped into a 1" scope ring Made in America

Crosman 0401 5rd Pellet Clips, Fits 760 Pumpmaster, M4-177, 66 Powermaster & 781/782 Black Diamond, 4pk $5.94 5rd pellet clips 4ct Fits 760 Pumpmaster, M4-177 (and M-417), 66 Powermaster, 781 & 782 Black Diamond airguns Does not fit guns produced before 2002: Only fits guns from 2002-present Carrying around bulky tins is a pain. Instead, this 4pk of 5rd pellet clips gives you 20 extra shots without stopping the shooting action.

Echo1 FAT AEG Magazine, Fits Echo1 M4/M16 Electric Airsoft Rifles, 850 Rds $32.4 AEG magazine Fits Echo1 M4/M16 electric airsoft rifles Metal Black 850 rds Carrying spare AEG magazines is a great way to minimize time spent reloading in the battlefield. This 850 rd magazine is full metal and fits Echo1 M4 & M16 AEGs. Pick up this replacement magazine for your next airsoft skirmish!

H&K Airsoft Pistol 25rd Magazine, Fits H&K KWA MK23 Airsoft Pistols $45.54 Airsoft pistol 25rd magazine Fits H&K KWA MK23 USSOCOM airsoft pistols Got a H&K MK23 airsoft pistol? Pick up this spare magazine and spend more time shooting and less time reloading during intense airsoft missions. Fits KWA H&K MK23 USSOCOM airsoft pistols exclusively.

Cybergun Airsoft Pistol Magazine, Fits Taurus PT92 Spring Airsoft Pistols 21110 $5.99 Airsoft pistol magazine Fits Taurus PT 92 spring airsoft pistol Item # 21110 Carrying spare magazines ensures you don’t run out of ammo at the wrong time during battle. This replacement magazine fits Taurus PT 92 spring airsoft pistols exclusively. Pick up this magazine for your next airsoft skirmish!

H&K Gas Blowback Pistol Magazine, Fits KWA H&K USP Gas Blowback Airsoft Pistols, 25 Rds $47.99 H&K gas blowback pistol magazine Fits KWA H&K USP GBB airsoft pistols 25 rds Spend more time shooting and less time reloading. This 25 rd spare magazine fits the KWA H&K USP gas blowback pistol exclusively. Carry this spare magazine for your next airsoft skirmish!

WE Green Gas Rifle Magazine, Fits PDW Open Bolt Rifles, Black, 30rds $51.54 WE green gas rifle magazine Fits PDW open bolt gas blowback rifles Full metal Black 30 rds Carrying spare magazines allows you to avoid the hassle of constant reloading in the battlefield. This 30 rd replacement magazine fits WE PDW green gas airsoft rifles exclusively. Grab this spare magazine for your next airsoft war!

WE Green Gas Rifle Magazine, Fits PDW Open Bolt Rifles, Tan, 30rds $51.54 WE green gas rifle magazine Fits PDW open bolt gas blowback rifles Full metal Tan 30 rds Avoid the hassle of constant reloading. This 30 rd replacement magazine fits WE PDW green gas airsoft rifles and allows you to fully focus on your battlefield targets. Carry this spare magazine for your next airsoft war!

Kalashnikov AK47 Magazine, Fits Spring-Powered & AEG Kalashnikov AK47 Airsoft Rifles, 400 Rds $15.59 AK47 magazine Fits Kalashnikov AK47 AEG & spring-powered airsoft rifles: 12701, 12702, 12703, 12701, 12912,12916, 12922, 12930, 400 rds Pick up a spare magazine for your Kalashinkov AK47 and spend less time reloading during intense airsoft skirmishes. This magazine fits spring & battery powered Kalashnikov AK47 airsoft rifles.

KWA Gas Blowback Magazine, Fits M9 Series NS2 Gas Blowback Airsoft Pistols, 24 Rds $35.99 KWA gas blowback magazine Fits M9 Series (M9 PTP/M9PTP-T) NS2 GBB airsoft pistols 24 rds Carrying spare magazines lets you spend less time reloading in the battlefield. This gas blowback magazine by KWA fits M9 series gas blowback airsoft pistols exclusively. Pick one up for your next airsoft skirmish!

Evanix .20 Cal Rifle Magazine, Fits Evanix Hunting Master AR6 Rifles $21.49 Evanix .20 cal rifle magazine Fits Hunting Master AR6 rifles Own an Evanix Hunting Master AR6 rifle? Pick up this spare magazine and eliminate the need for constant reloading during your next hunting trip. This replacement magazine fits the .20 cal Hunting Master AR6 rifle exclusively. Pick one up today!

Tanfoglio Pistol Magazine, Fits Tanfoglio Full Metal CO2 Blowback Pistol, 18 Rds $35.99 Tanfoglio pistol magazine Fits Tanfoglio full metal CO2 blowback pistol (item # 358003) 18 rds Own a Tanfoglio CO2 blowback BB gun? Pick up this spare magazine and spend more time shooting and less time reloading. This magazine fits the Tanfoglio CO2 full metal CO2 blowback pistol exclusively. Pick one up today! For use with steel BBs only.

Air Venturi Scope Base, Weaver/Picatinny Rail, Fits IZH-46M $23.99 Weaver/Picatinny scope rail for IZH-46 2 Allen screws secure the base Easy installation

Beretta Tri-Rail, Weaver/Picatinny Rails, Fits Bereta Cx4 Storm $32.34 Tri-rail for Beretta Cx4 Storm Provides 3 separate Weaver/Picatinny rails Ideal for mounting lasers, flashlights or a bipod Do not use on the Beretta CX4 firearm!

AirForce Extra Air Tank, Air or Nitrogen, Fits Talon & Talon SS $217.8 There’s nothing like an extra tank for air or nitrogen to keep the shooting fun going! Air tank includes metal buttplate.

Pyramyd Air Bands, 3ct, Fits Most Pellet Tins $5.99 Don’t you hate it when your pellets spill out of a tin after you’ve removed the tape that holds the lid in place? You can’t use those spilled pellets, cause the skirts are dinged or the pellets are dirty. That’s why you need our bands! Slip one over a closed tin and never spill pellets again! 3 bands in different sizes

Crosman 0407T Rotary Clips, Fits 357 Pistols, 3pk $7.14 Want more bang for your buck? The 407T holds three 10-pellet rotary clips for all CROSMAN 357 pellet air pistols. This accessory will not fit the 3576BB model.3 for each packet.

Slide Bar, Fits .177 Cal Colt 1911 CO2 Pistol $60 Slide bar for .177 caliber Colt 1911 CO2 pistol Spare part: U-41740010

AirForce Spin-Loc Air Tank, Fits TalonP Air Pistols $188.1 Spin-Loc air tank Connects to an AirForce TalonP pistol without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings 6.125" long Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

Gamo Gun Buddy Rifle Sling, Fits All Air Rifles $15.59 Perfect for any air rifle Lightweight and durable Quick adjustment fasteners Non-slip pebbling Deluxe, shock-absorbing shoulder strap No sling swivels required! Front slips over barrel, back slips over buttpad

Walther Cord Switch, Fits Walther Xenon Tactical Flashlight $8.39 Cord switch for remote operation of Walther Xenon tactical flashlight.

Air Venturi HP4500 Replacement Valve, Fits Carbon Fiber Tank $179.99 Replacement valve for Air Venturi AV-4500HPT, a carbon fiber tank.

Crosman 413 12-Rd Pellet Clips, Fits 1077 & NightStalker, 3-Pack $5.99 3 12-rd rotary pellet clips For Crosman 1077 or NightStalker CO2 rifles

Crosman 8-Shot Rotary Clips, Fits T4 & 1088 Pistols, 3/Pack $8.39 Don’t you hate it when you are ready for action but you have to stop and reload this darn magazine? Well, simply buy more of these, preload, and don’t worry about your shooting session getting interrupted just when you are getting warmed up!

UTG Scope Mount Base, Fits RWS Diana Rifles, Gamo Whisper & Others $21 Fits guns with the T05 trigger. In 2011, Diana introduced the T06 trigger and it also has a longer rail. This adapter does NOT fit the guns with a longer rail. Fits RWS Diana breakbarrel rifles that have no barrel droop Also fits Gamo rifles with a raised scope rail Attaches to rifle’s 11mm scope rail Special "recoil shock shoulder" stops scope shift–forever! Hide’s rifle’s 11mm scope rail; looks professional Scope base provides secure scope mounting with Weaver/Picatinny mounts 3 hex screws attach base to your Diana rifle Includes 2 hex wrenches Does not fit RWS Diana 46 or Schutze rifles

Hammerli 850 AirMagnum 11mm-to-Weaver Scope Rail, Fits Most Guns w/11mm Dovetail $35.29 11mm-to-Weaver scope rail Mounts on RWS 850 AirMagnum receiver Fits almost any gun with an 11mm dovetail Attaches on top of the 11m dovetail grooves in the receiver Weaver/Picatinny rail for accessories Makes it easy to mount scopes & other accessories

Evanix Single Mag, Fits Speed, Conquest, Max & Rainstorm II, .22 Cal, 10rds $41.94 10-rd mag Fits Evanix Speed, Conquest, Max & Rainstorm II airguns .22 caliber Load up your mag before you leave home and simply pop in a new 10-rd mag in your Evanix PCP air gun. No fumbling for a refill in the field. Shoot more, load less!

SRC Automatic AEG Rifle Magazine, Fits AK Styled Rifles, Metal, 3000 Rds $89.99 AK rifle magazine Fits most AK styled AEG rifles Metal 3000 rds This metal AK rifle magazine by SRC is great for extended airsoft skirmishes. A 3000 rd capacity lets you concentrate on battlefield targets without constantly reloading your gun!

Air Venturi Female DIN adapter for Foster quick-disconnect, Fits FWB, Walther Dominator, Older HW100 Rifles & Other 10M Guns $31.19 Female DIN adapter Foster quick-disconnect Fits FWB, Walther Dominator, older HW100 rifles & many other 10m guns

Welman 11mm-to-Picatinny Drooper Rail, 22 MOA, Fits Air Arms S410/S510 Air Rifles $91.8 11mm-to-Picatinny (MIL-STD-1913) adapter Compensates for barrel droop 22 MOA @ 100 meters Fits Air Arms S410/S510 air rifles Hard-anodized aircraft-grade aluminum Secures to your air rifle’s 11mm rail with screws A hole in the mount allows access to the magazine assembly for any needed adjustments 105 grams (3.68 oz.) Any gun can have barrel droop. This 11mm-to-Picatinny (MIL-STD-1913) adapter fits Air Arms S410 and S510 air rifles and compensates for 22 MOA of droop at 100 meters. The adapter was designed for people who shoot at longer distances. Does not fit S400 or S500 air rifles because the cutout for the loading port requires a different relief.

Welman 11mm-to-Picatinny Drooper Rail, 16 MOA, Fits Air Arms S410/S510 Air Rifles $91.8 11mm-to-Picatinny (MIL-STD-1913) adapter Compensates for barrel droop 16 MOA @ 50 meters Fits Air Arms S410/S510 air rifles Hard-anodized aircraft-grade aluminum Secures to your air rifle’s 11mm rail with screws A hole in the mount allows access to the magazine assembly for any needed adjustments 105 grams (3.68 oz.) Any gun can have barrel droop. This 11mm-to-Picatinny (MIL-STD-1913) adapter fits Air Arms S410 and S510 air rifles and compensates for 16 MOA of droop at 50 meters. The mount was designed for the distances usually used by field target shooters…but it’ll work for any purpose you decided to use your air rifle. Does not fit S400 or S500 air rifles because the cutout for the loading port requires a different relief.

Crosman Nitro Piston Conversion, Fits Walther Falcon Hunter, Talon Magnum & some Hatsan models $131.99 Pyramyd Air MUST install the Nitro Piston in your gun. It cannot be sold for customer installation. You will be charged shipping during the checkout process. That’s the charge to send your gun back to you after installation. Send your airgun to: Crosman Nitro Piston Installation 18370 S. Miles Road Warrensville Heights, OH 44128 The perfect upgrade for your Walther Falcon Hunter, Talon Magnum and some Hatsan air rifles. Crosman Nitro Piston conversion Fits Walther Falcon, Talon Magnum and some Hatsan air rifles Fits any caliber! Maintains same velocity as the metal spring Smoother cocking Smoother shooting No spring torque No spring fatigue, even if you leave it cocked for hours Functions perfectly in cold weather Lasts longer than a metal spring Installation is included in the price! All internal parts removed for this conversion will be sent back with your gun

KJ Works Green Gas Pistol Magazine, 25 Rds, Fits Taurus PT92 Airsoft Pistol $32.34 KJ Works green gas pistol magazine 25 rds Fits Taurus PT92 airsoft pistol Item#:CG21516[PY-2428-4877] Own a Taurus PT92 airsoft pistol? Spend less time reloading and pick up this 25 rd spare magazine for your next airsoft skirmish! This magazine is compatible with the Taurus PT92 green gas pistol only.

Air Arms Bleeder Tool, Fits Air Arms S400 MPR Air Rifles $17.94 Air Arms bleeder tool Safely exhausts air from the reservoir Fits Air Arms S400 MPR air rifles If you need to remove any remaining air from your Air Arms S400 MPR air rifle’s reservoir, you’ll need this tool to do it. Works fast and does the job safely.

B-Square 17401 Interlock Adjustable AA 1-Pc Mount w/1" Rings, 11.7mm Dovetail, Fits Webley Patriot $69.54 Specially designed with 2 crossbars to fit the grooves of Webley rifles, including the Patriot. 1" rings Fits 11.7mm dovetail on the Webley Patriot Extra-long base Windage/elevation adjustments 4 hex screws/ring secure the scope Vertical stop pin Gimbel action eliminates scope stress Black matte finish

Evanix Single Mag, Fits Speed, Conquest, Max & Rainstorm II, .177 Cal, 10rds $41.94 10-rd mag Fits Evanix Speed, Conquest, Max & Rainstorm II airguns .177 caliber Use with your Evanix PCP air guns. Buy several of these and load them so you don’t have to carry a rattling tin of pellets with…and then fumble in the field and lose some prime shooting opportunities. Especially helpful when hunting!

WE Green Gas Pistol Magazine, 25 Rds, Fits WE M-92, HFC M190 $27.54 WE green gas pistol magazine 25 rds Fits WE M-92 (item#WE-043) HFC M190 GBBs (Item # SDGGMFA9B, SDGGMSA9B, SDGGPFA9B,SDGGPSA9B, SDG194FXB), Taurus PT92 GBBs (item # CG210504, CG21516). This 25rd WE green gas pistol magazine lets you spend more time shooting and less time reloading in the battlefield. The magazine is compatible with the WE M-92, HFC M190 GBB pistols and Taurus PT92 GBB pistols. Pick one up for your next airsoft skirmish!

Daisy AirStrike 241 Airsoft Pistol Magazine, Fits Daisy AS240 Airsoft Pistols, 15 Rds $4.74 Airsoft pistol magazine Fits Daisy AS240 airsoft pistols 15 rds Spend more time shooting and less time reloading and upgrade your Daisy AS240 airsoft pistol with this replacement magazine. This spare magazine hold 15 rds as opposed to the factory standard 10 rd AS240 magazine. Pick one up today!

Air Arms Walnut Stock, Right-Hand, fits S400, S410, S500, S510 Air Rifles $335.94 Air Arms Monte Carlo walnut stock Fits S400, S410, S500 & S510 air rifles Right-hand Ventilated rubber buttpad Checkered pistol grip and forearm Raised cheekpiece If you bought your Air Arms precharged pneumatic gun with a beech stock, you can upgrade it to this walnut beauty. Did you break or ding your walnut stock? This is the replacement that’ll make it right, again.

Smith & Wesson Magnum Series Mini Clear Lens Safety Glasses, Fits Kids $9.59 Fits kids! The Magnum Series safety glasses are ergonomically dimensioned for a 3 point fit, the ultimate in comfort. Reduced size for smaller adults and youth. Comes in a Black Frame with Clear Lens. Exceeds ANSI Z87.1 safety standards Provides maximum UV protection Ergonomic nose pad with self-adjusting rubber fingers Built-in hinge stops Polycarbonate safety glasses protect your eyes from impact, but the glasses deteriorate due to scratches, light, etc., and should be replaced after 2 years.

Air Arms MPR Palm Rest Kit, Fits S400 MPR Air Rifle $71.94 Palm rest kit Fits Air Arms S400 MPR 10-meter air rifle Includes palm shelf, hex wrench, washers, screws and 2 lengths of extenders Customize your Air Arms S400 MPR air rifle by adding a palm rest for a steadier hold. The extenders come in two lengths that will suit most shooters. Generally speaking, a palm rest will increase your accuracy.

TSD JB Int’l M4 Box Magazine, Holds 5000 Rds, Fits M4 AEGs by TSD $27.54 High-capacity magazine Holds up to 5000 rounds Fits all TM-compatable M4 AEGs Black poly fiber construction 2 refill reserviors for faster loading Recommended for these M4 AEG brands: Echo 1, Jing Gong, TSD Tactical, ICS/Olympic Arms, TM, GP, Gaurder, Star, CA and GG

Smith & Wesson 6" Barrel, .177 Cal., Matte Black, Fits S&W 586 CO2 Revolver $67.19 S&W 6" barrel .177 caliber Matte black shroud Fits Umarex-made Smith & Wesson 586 CO2 revolvers Increases velocity over the 4" barrel Easy to install No machining involved Includes shroud, barrel & screw Does not fit S&W firearms or airsoft guns If you’ve got an Umarex S&W 586 CO2 revolver with a 4" or 8" barrel, then this 6" one will make your collection complete. The longer the barrel on a CO2 gun, the greater the velocity.

High-Capacity Airsoft Rifle Magazine, Fits Kalashnikov AK47 & AK74 Electric Airsoft Rifles, 430 Rds $17.94 High-capacity airsoft rifle magazine Fits Kalashnikov AK47 & AK74 AEG rifles 430 rds Own a Kalashnikov AK47 or AK74 AEG? This spare high-capacity magazine lets you spend less time reloading during intense airsoft skirmishes. The magazine holds 430 rds and is made with durable plastic material. Pick up this magazine today!

Front Sight Inserts, Fits Weihrauch & Beeman HW Air Rifles, .575" OD $35.99 Front sight inserts Fits Weihrauch & Beeman HW air rifles Set of 5 inserts .575" outside diameter (OD) Select an insert for any distance & lighting condition. These front sight inserts come in packs of 5 and fit Beeman HW and Weihrauch air rifles. Never let a lost insert spoil your shooting again!

KWA Green Gas Magazine, Fits M1911 MARK I-IV Series Green Gas Airsoft Pistols, 14 Rds $35.99 KWA green gas magazine Fits M1911 MARK I-IV series green gas airsoft pistols 14 rds Own a KWA M1911 MARK I-IV green gas pistol? This spare 14 rd magazine lets you concentrate on your battlefield targets without worrying about constant reloading. Pick up this spare magazine for your next airsoft skirmish!

KWA Green Gas Pistol Magazine, Fits USP Compact Airsoft Pistols, 22 Rds $44.39 Green gas magazine Fits USP Compact green gas airsoft pistols 22 rds Own a KWA USP Compact airsoft pistol? This spare 22 rd green gas magazine lets you concentrate on shooting without worrying about constant reloading during intense airsoft wars. Pick up this spare magazine today!

Evanix Dual Mag, Fits Speed, Conquest, Max & Rainstorm II, .177 Cal, 20rds $83.99 Two 10-rd mags in one convenient package Fits Evanix Speed, Conquest, Max & Rainstorm II airguns .177 caliber 20 rds total When you’re shooting your Evanix PCP air gun, you need to stack up as many pellets as you can so you shoot more & reload less.

Evanix Dual Mag, Fits Speed, Conquest, Max & Rainstorm II, .25 Cal, 20rds $95.99 Two 10-rd mags in one convenient package Fits Evanix Speed, Conquest, Max & Rainstorm II airguns .25 caliber 20 rds total Your Evanix precharged pneumatic air gun will deliver more fun if you leave your pellet tin at home and just take along preloaded mags.

Evanix Single Mag, Fits Speed, Conquest, Max & Rainstorm II, .25 Cal, 10rds $57.59 10-rd mag Fits Evanix Speed, Conquest, Max & Rainstorm II airguns .25 caliber This is the biggest smallbore caliber, and it delivers a real punch! Load this mag with ten .25-caliber lead pellets and leave your pellet tin at home. No noisy rattling while you’re trying to stealthily hunt with your Evanix air gun.

Evanix Dual Mag, Fits Speed, Conquest, Max & Rainstorm II, .22 Cal, 20rds $83.99 Two 10-rd mags in one convenient package Fits Evanix Speed, Conquest, Max & Rainstorm II airguns .22 caliber 20 rds total Do you hunt? Load up some extra mags for your Evanix PCP air gun and leave the noisy pellet tin at home. No fumbling for pellets in the field. Just load and shoot!

Radians Sheath OTG Indoor/Outdoor Safety Glasses, Fits Over Glasses, Clear Lens, Silver Temples $4.74 Radians Sheath OTG safety glasses Fits over most prescription lenses Indoor/outdoor polycarbonate lens Telescoping, ratcheting silver temples Produced in ISO-certified facilities Meets or exceeds ANSI Z87.1+ standards 99.9% UVA/UVB protection Wearing prescription glasses can be a real problem when shooting because they’re not sufficient to withstand a mishap with a ricocheting or wayward projectile. To get maximum protection for your eyes, slide a pair of our Radians Sheath OTG safety glasses over your prescription lenses. The slightly shaded lens is suitable for indoor and outdoor use. Let the shooting begin!

Air Venturi Flash Suppressor, Fits AirForce Bounty Hunter Air Rifles, 1/2"x28tpi $23.94 Flash suppressor Fits AirForce Bounty Hunter air rifles 1/2"x28tpi (internal threads) AirForce Bounty Hunter air rifles come with our custom flash hiders. When we sell a Bounty Hunter rifle, we have to thread the barrel to fit the flash hider. If you already have a threaded barrel on your Bounty Hunter and need a different or spare flash hider, this will fit. If you’re ordering a Condor, Talon or Talon SS (or an extra AirForce barrel) at the same time and want us to thread the outside of your barrel (for a minimal fee), then click the "Add Service" button.

Radians Sheath OTG Anti-Fog Safety Glasses, Fits Over Glasses, Clear Lens, Silver Temples $4.74 Radians Sheath OTG safety glasses Fits over most prescription lenses Clear anti-fog polycarbonate lens Telescoping, ratcheting silver temples Produced in ISO-certified facilities Meets or exceeds ANSI Z87.1+ standards 99.9% UVA/UVB protection Wearing prescription glasses can be a real problem when shooting because they’re not sufficient to withstand a mishap with a ricocheting or wayward projectile. To get maximum protection for your eyes, slide a pair of our Radians Sheath OTG safety glasses over your prescription lenses, and let the shooting begin!

Airforce Braided Steel Hose, Quick-Disconnect, Fits Older Airforce Refill Clamp & Hand Pump $36 Braided steel hose Quick-disconnect fitting Fits older Airforce refill clamp with gauge (U1012) & older AirForce hand pump (U1014) To fill Talon/Condor rifles, use a refill adapter with quick-disconnect nipple (U1013) to attach the hose’s quick-disconnect This braided steel hose will stand up to many years of use without compromising its integrity. Strong, flexible, reliable…and safe. Current AirForce high-pressure fill devices come with a hose. The older pumps and scuba yokes did not come with a hose. If you have one of the older units and need to replace your hose, this is the item to get.

Sig Sauer GSR .177 Cal CO2 Pistol Magazine, Fits Sig Sauer GSR Non-Blowback BB Pistols, 22 Rds $27.54 Sig Sauer GSR .177 cal CO2 pistol magazine Fits Sig Sauer GSR non-blowback BB pistols 22 rds Buy an extra magazine so you can reload faster! This spare 22 rd Sig Sauer BB pistol magazine fits the .177 cal Sig Sauer GSR non-blowback CO2 pistol exclusively. Pick one up today.

SIG Sauer P226 X5 Pistol Magazine, Fits Sig Sauer P226 X5 CO2 Blowback Airsoft Pistols, 27 Rds $35.99 CO2 pistol magazine Fits Sig Sauer P226 X5 CO2 airsoft pistols: CG28518 and CG28514 Full Metal 27 rds Spend more time shooting and less time reloading during intense airsoft wars. This full metal magazine by Cybergun fits the Sig Sauer P226 X5 CO2 blowback airsoft pistol exclusively. Pick one up for your next skirmish today!

UTG Foregrip & Integral LED Flashlight, QD Cam Lever, Fits Weaver/Picatinny Rails $87.54 Foregrip & integral LED flashlight Quick-detach cam lever Fits any Weaver/Picatinny rail Aircraft-grade aluminum alloy Integrated reflector & lightbulb Ambidextrous push button on/off switch Best in class CREE Q5 LED Textured surface Bronze housing 1.43" dia. 5.17" high 12 oz. This tactical foregrip & LED flashlight adds versatility to your airsoft gun and offers you superior control in the battlefield. This grip/flashlight mounts on any Weaver/Picatinny rail equipped airsoft gun and attaches & detaches easily with a quick-detach cam lever. This grip/flashlight is an excellent airsoft accessory for cqb skirmish situations. Pick one up today!

AirForce CO2 Adapter with Filled 12-oz. CO2 tank, fits Condor, Talon & Talon SS $143.94 Includes CO2 adapter & filled 12-oz. CO2 tank Fits AirForce Condor, Talon & Talon SS guns Over 1,000 shots per CO2 tank Ideal for shooting indoors Easy to switch back to air No handpump or scuba tank required Quieter operation Ground shipping only How to switch from high-pressure air to CO2: Unscrew your AirForce air tank from your rifle Screw in your CO2 adapter into your rifle Screw in the filled tank into the other end of the adapter Start shooting! When this tank is empty or down to a low level, fill up with more CO2 from a larger bulk-fill tank. This filled tank can be sent only by ground…no air shipping allowed!

Benjamin & Sheridan Repair Kit, Fits Some Post-1995 Multi-Pumps w/Cartridge Valve $19.14 Repair kit fits these multi-pump guns made after 1995 & they have a compression tube that slides out of the assembly & does not need a special tool (has a cartridge valve & the valve is NOT soldered). It may be necessary to push out the assembly from the front of the tube: Benjamin 397 & 392 guns as well as Sheridan C9 (Silver Streak) & CB9 (Blue Streak). To determine if this kit is for you: Remove the screw in front of triggerguard to remove rear part of the stock Remove the pins or screws that hold the retention cap at the rear of the receiver Remove the guide pin, spring & hammer to reveal the compression tube If the brass compression tube comes out in one piece, then this is the kit you need If your gun has a rounded square hole with a valve stem sticking up through it, then you need the other repair kit (CR/Repairkit) If you need assistance, contact our technicians at 888-262-4867, ext. 244

AirForce CO2 Adapter with Filled 20-oz. CO2 Tank, Fits Condor, Talon & Talon SS $151.19 Includes CO2 adapter & filled 20-oz. CO2 tank Fits AirForce Condor, Talon & Talon SS guns Over 1,000 shots per CO2 tank Ideal for shooting indoors Easy to switch back to air No handpump or scuba tank required Quieter operation Ground shipping only How to switch from high-pressure air to CO2: Unscrew your AirForce air tank from your rifle Screw in your CO2 adapter into your rifle Screw in the filled tank into the other end of the adapter Start shooting! Since this tank is filled with CO2, it has to be shipped via ground service. Start shooting when this arrives, and refill it from a bulk-fill CO2 tank.

Benjamin & Sheridan Repair Kit, Fits Some Pre-1995 Multi-Pump Guns w/Soldered Valve $33.54 Repair kit fits these multi-pump guns made before 1995 (they have a soldered valve): Benjamin 397, 392, 340, 342 & 347 guns as well as Sheridan C9 (Silver Streak) & CB9 (Blue Streak). To determine if this kit is for you: Remove the screw in front of triggerguard to remove rear part of the stock Remove the pins or screws that hold the retention cap at the rear of the receiver Remove the guide pin, spring & hammer to reveal the compression tube If the compression tube appears to be brass & is one piece with a pin protruding from it, you’ll need the other kit (CR/RepairKitC9) instead of this one If your gun has a rounded square hole with a valve stem sticking up through it, then the kit shown on this page will fit your gun. The included valve tool (pictured on this page) is needed to remove the parts from the soldered valve body (directions included with kit). If you need assistance or would like Pyramyd Air’s techs to do the installation, contact our technicians at 888-262-4867, ext. 244 This kit includes parts that are still available from Crosman and may require slight modification. If your gun is very old and has been treated with any petroleum distillates and/or solvents that damage rubber seals, the removal of the old parts can be challenging. The obsolete gasket that seals the valve guide to the compression tube can normally be reused. If you used petroleum products, it may be irreparably damaged and will need to be replaced by a thin o-ring. If you would like Pyramyd Air’s tech department to install this kit in your Sheridan or Benjamin rifle, please contact them at 888-262-4867, ext. 5. There will be an additional cost for the installation service, plus shipping both ways…BUT it’ll be done perfectly!

UTG Scope Mount Base, Fits RWS Diana 48, 52, 54 & 460 Magnum with TO5 Trigger, Compensates for Droop & Stops Scope Shift $22.74 We strongly recommend that you use a 2-piece Weaver scope mount that has 4 screws on each ring cap.

UTG Scope Mount Base, Fits RWS Diana 34, 36, 38, & 45 with TO5 Trigger, Compensates for Droop & Stops Scope Shift $22.74 We strongly recommend that you use a 2-piece Weaver scope mount that has 4 screws on each ring cap.

GrovTec Swivel Set, Wood Screws, Fits Some Lever-Action & Tube-Mag Rifles & Carbines, 1" Loops, Black Oxide $15.59 Swivel set for lever-action, tube-mag rifles & carbines 1" loops Black oxide finish 2-piece band fits mag tubes .630" to .675" diameter, band barrels of some Browning & Ruger models, .410 shotguns Includes 3/4" rear wood screw swivel stud, Allen wrench & 1 pair of locking swivels

Colt 1911 CO2 Pistol 17 Rds Metal Magazine, Fits Colt 1911 CO2 Blowback Airsoft Pistol item # CG18512 $35.94 Colt pistol magazine Fits Colt 1911 CO2 blowback airsoft pistol Item#:CG48628[PY-A-3836] 17 rds Carrying spare magazines during intense airsoft wars means less time spent reloading your gun. This 17 rd CO2 magazine is made for use with the Colt 1911 CO2 blowback pistol. The magazine also includes a spare hex wrench to secure the CO2 cartridge for safe firing in the battlefield.

AirForce Spin-Loc Hi-Flo Air Tank, Fits .20, .22 & .25 AirForce Condor Rifles $270 Spin-Loc Hi-Flo air tank Connects to AirForce Condor rifles without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank Does not fit .177-caliber guns. Use ONLY for .20-, .22- and .25-caliber Condors. The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

Benjamin CO2 & Air FIll Adapter, Fits Benjamin Air Tank or Standard Paintball CO2 Tank $83.99 Made specifically for the Dual Fuel capability of the Benjamin Discovery & Marauder and the Crosman Challenger. Includes: CGA-320 fitting for Benjamin carbon fiber tank or a standard paintball CO2 tank Fitting is .825×14 (standard paintball CO2 connector size) 7" stainless steel braided hose (12" overall length) Patented bleeder valve Female Foster quick-disconnect fitting

Stoeger Arms Soft Rifle Case, Fits Scoped or Unscoped Rifles, 50" Long $29.99 Stoeger Arms rifle case Soft case 50" long 8" high (at highest point) Zip close Padded Wraparound handles Extra protection for the muzzle 7.5"x4.5"x1.5" outside pocket w/hook-and-loop close Whether you’ve spent $100 or $1000 for an airgun, you need a case to protect it. Stoeger Arms’s soft air rifle case will cushion your gun from getting knicks and gouges as you drive to and from the range. The outside pocket is big enough to carry pellet tins, extra mags, hex wrenches and more.

AirForce Spin-Loc Standard Air Tank, Fits AirForce Talon & Talon SS Rifles $246.6 Spin-Loc standard air tank Connects to an AirForce Talon/Talon SS rifle without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

GrovTec Swivel Set, Wood Screws, Fits Bolt-Action Rifles, 1" Loops, Black Oxide $10.79 Swivel set for bolt-action rifles 1" loops Black oxide finish Includes 1/2" wood screw fore end swivel stud, 3/4" wood screw rear, spacers & 2 locking swivels

AirForce Quick-Detach Fiber Optic Open Sights, Fits AirForce Talon & Condor $78.6 These state-of-the-art front & rear sights add tremendous flexibility to your Talon, Talon SS or Condor. Quickly switch from open sights to other sighting systems, including a scope, red dot, laser or night vision.

Gamo Target Faces, Fits Squirrel Field Target Mechanism, 6/pk + 4 Kill-Zone Reducers $21.48 6 target faces for Gamo’s squirrel field target mechanism Kill zone is 1-1/2" diameter 4 kill-zone reducers (1-1/8", 3/4", 1/2" and 3/8") to insert as your skill improves Use lead pellets only

Crosman C11 BB Mag, 18-rd Stick, 2/Pack, Fits C11/C21/C31, Beretta Elite II & S&W M&P $16.74 2 stick mags for the C11, C21, and C31 BB pistols plus the Beretta Elite II and the S&W M&P Each holds 18 steel BBs Made for STEEL BBs (Does NOT fit the C11 airsoft pistol!)

AirForce Spin-Loc Hi-Flo Air Tank, Fits .177 AirForce Condor Rifles $270 Spin-Loc Hi-Flo air tank Connects to .177-caliber* AirForce Condor rifles without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted** to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *The Condor’s Hi-Flo tank is caliber-specific. **To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

UTG Dual Shotgun Magazines, Fits UTG M87T & UTG MB5S Airsoft Shotguns, 2ct $5.94 Airsoft shotgun magazines For use with UTG MB5S,UTG M87T and SD1187B shotguns

AirForce Spin-Loc Micro-Meter Air Tank, Fits AirForce Sporting Rifles $246.6 Spin-Loc Micro-Meter air tank Connects to an AirForce Talon/Talon SS or Condor rifle without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings 10.875" long Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

TailorMaid Bowstrings 27.5" Yoke Cable, 20 Strand, Fits Crosman Teton & Bristol Crossbows $16.79 Replacment yoke cable for Crosman Teton and Bristol crossbows 27.5" 20 strand