The IPAD and accessories: What you should know by now that the IPAD has been out for a few days and have read every review possible, the printed article first, and op-ed, you're probably starting to …
hw 100 custom quick fill adapter

Air Venturi CO2 Bulk-Fill Adapter, Fits Umarex EBOS $23.99 Air Venturi CO2 bulk-fill adapter Fits Umarex EBOS Screw the adapter into the CO2 port of the EBOS With the adapter securely attached, screw a paintball CO2 bulk-fill tank (12 oz. recommended) into the adapter (see note below) Extremely economical…more shots, less money EBOS buttstock cannot be attached when you use this bulk-fill CO2 adapter NOTE: The paintball tank valve will immediately open when it’s completely screwed into the adapter. Make sure the adapter is tightly/securely installed in the gun before the tank is tightened down.

Air Arms Fill Adapter, Fits Air Arms Rifles w/Detachable Tanks $35.94 Fill adapter Fits Air Arms airguns with removable tanks Connects to a female DIN thread If you’ve lost the fill adapter for your Air Arms airgun, here’s a replacement adapter.

Benjamin CO2 Fill Station, Use With CGA 320 Adapter $75 Benjamin CO2 fill station Attaches to common bulk-fill CO2 tanks Fill smaller refillable CO2 tanks Pin-valve depressor Fill control Vent knob Use with CGA 320 valve For Crosman & Benjamin guns that have refillable CO2 tanks If your Benjamin or Crosman gun has a refillable CO2 tank, get this fill station to save some money! Get a large CO2 tank, fill it and then attach this unit to the tank. You’ll also need an ASA adapter (CGA 320 valve) to attach from the fill station’s hose to the gun. Bulk-filling saves money, gives you more shots for your money and lets you spend more time shooting your air guns!

Benjamin CO2 Fill Adapter, Fits Discovery, Marauder & Challenger $43.19 CO2 fill adapter Fits Benjamin Discovery & Marauder and Crosman Challenger C GA-320 fitting with .825×1/4 thread, 8" stainless steel hose, female Foster fitting Use with CO2 paintball tanks Do not use for filling gun with pressurized air

Air Venturi IZH Drozd Bulk-Fill Adapter $59.94 No more small powerlets. This original adapter will accept any paintball bottles (click here for 12 oz or 20 oz). (Approx. 1300 shots with 20-oz. tank & approx. 780 shots with a 12-oz. tank) Turn your IZH Drozd into a real fun auto BB machine gun! To install this unit, you must modify the magazine by cutting a small slot in the cover plate. This does not prevent you from going back to 12-gram CO2 cartridges if you decide to use them.

Air Venturi Steel Storm CO2 Bulk-Fill Adapter $59.99 Fits Umarex Steel Storm Eliminates need for disposable CO2 cartridges Go back to using disposable CO2 cartridges anytime No alterations are required! Easy to use, easy to attach Includes hose with bulk-fill CO2 tank connector, which connects to the gun’s CO2 inlet Bulk-fill CO2 tank NOT included No more small powerlets. This adapter accepts any paintball bottle (click here for 12 oz or 20 oz). Approx. 1300 shots with a 20-oz. tank & approx. 780 shots with a 12-oz. tank. With this setup, you’ll spend more time shooting and less time and money on 12-gram CO2 cartridges! Plug & play…absolutely no alterations are made to your Steel Storm!

Blackbird CO2 Bulk-fill Conversion Hose & Adapter $59.99 Fits IZH Drozd Blackbird Adapts Blackbird mag so it connects to a refillable CO2 tank in the stock Eliminates need for disposable CO2 cartridges Easy to convert back to disposable CO2 cartridges No alterations are required Easy to use, easy to attach

Air Venturi Scuba Tank Adapter $65.99 "Scuba Yoke" Fill Station

AirForce DIN Fill System, Fits AirForce Talon & Condor Rifles $78.6 AirForce Airguns DIN adapter Fits AirForce Talon & Condor airguns Fits any scuba tank with a DIN fitting If your scuba tank comes with a DIN fitting, get this and start filling your Talon and Condor PCP guns!

Benjamin CO2 & Air FIll Adapter, Fits Benjamin Air Tank or Standard Paintball CO2 Tank $83.99 Made specifically for the Dual Fuel capability of the Benjamin Discovery & Marauder and the Crosman Challenger. Includes: CGA-320 fitting for Benjamin carbon fiber tank or a standard paintball CO2 tank Fitting is .825×14 (standard paintball CO2 connector size) 7" stainless steel braided hose (12" overall length) Patented bleeder valve Female Foster quick-disconnect fitting

Creedmoor Sports K Valve to 200 DIN Valve Adapter $59.98 K valve to 200 DIN valve adapter If your fill hose has a male 200 DIN thread connection and your scuba tank has a K valve, you’ll need this adapter.

Deluxe CO2 Fill Station $83.94 CO2 fill station Fills mini-CO2 tanks (such as the Daisy 888), 12 oz tanks & 20-oz tanks Wear eye protection when using fill stations!

Benjamin ASA Adapter, Connects Bulk CO2 Tanks to Benjamin Dual-Fuel Guns $21.59 ASA adapter Connects bulk-fill CO2 tanks to Benjamin & Crosman Dual-Fuel guns Screws into CO2 fill station or lever-fill station Includes o-ring & 1/8-inch threaded connection to attach to quick-disconnect fittings Connect your Crosman or Benjamin Dual-Fuel gun to a bulk-fill CO2 tank for more shots per fill.

CO2 Fill-Up $6 CO2 Fill-Up – gas. Please only add it to the shopping cart if you are purchasing a CO2 tank at the same time.

Air Venturi Scuba Tank Adapter & Hose Assembly, Female Connector, Gauge $93.54 Scuba tank adapter Includes hose with female connector Fits both tall- and short-necked scuba tanks K-valve only (does not fit DIN valves Includes gauge Connect your scuba tank to your PCP air rifles and air pistols and fill ‘er up!

AirForce CO2 Adapter with Filled 12-oz. CO2 tank, fits Condor, Talon & Talon SS $143.94 Includes CO2 adapter & filled 12-oz. CO2 tank Fits AirForce Condor, Talon & Talon SS guns Over 1,000 shots per CO2 tank Ideal for shooting indoors Easy to switch back to air No handpump or scuba tank required Quieter operation Ground shipping only How to switch from high-pressure air to CO2: Unscrew your AirForce air tank from your rifle Screw in your CO2 adapter into your rifle Screw in the filled tank into the other end of the adapter Start shooting! When this tank is empty or down to a low level, fill up with more CO2 from a larger bulk-fill tank. This filled tank can be sent only by ground…no air shipping allowed!

AirForce PCP Hand Pump, for AirForce Rifles, Incl. Hose + Adapter, Pumps up to 3600 psi $234.9 Fits AirForce Condor, Talon & Talon SS rifles. 3-stage hand pump Does not heat up with constant use Requires less effort than other pumps Goes up to 3,600 psi Integral air pressure gauge Moisture filter Incl. 11" braided steel hose with female quick-disconnect coupling and AirForce fill adapter with male quick-disconnect coupling Every pump tested by the manufacturer

AirForce CO2 Adapter with Filled 20-oz. CO2 Tank, Fits Condor, Talon & Talon SS $151.19 Includes CO2 adapter & filled 20-oz. CO2 tank Fits AirForce Condor, Talon & Talon SS guns Over 1,000 shots per CO2 tank Ideal for shooting indoors Easy to switch back to air No handpump or scuba tank required Quieter operation Ground shipping only How to switch from high-pressure air to CO2: Unscrew your AirForce air tank from your rifle Screw in your CO2 adapter into your rifle Screw in the filled tank into the other end of the adapter Start shooting! Since this tank is filled with CO2, it has to be shipped via ground service. Start shooting when this arrives, and refill it from a bulk-fill CO2 tank.

Eun Jin Fill Port Assembly, Fits Sumatra Air Rifle $21.54 Fill port assembly Fits Sumatra air rifle Original replacement part from Eun Jin Did you damage the fill port on your Sumatra air rifle? Replace it with this one made by Eun Jin, the original manufacturer.

Crosman Airsource CO2 Paintball Adapter $8.39 Paintball adapter Fits 88-gram AirSource CO2 tanks More convenient than a refillable tank This paintball adapter is compatible with Crosman 88-gram AirSource CO2 tanks. Simply attach the adapter to the paintball marker before you attach it to the cylinder. For paintball use only.

Umarex 850 CO2 Adapter $119.99 2x12g CO2 Adapter for Umarex 850 Magnum. Don’t have any 88 gram cartridges handy? This useful converter allows you to use two 12 gram cartridges in your Umarex 850 Magnum!

Type 96 Tri-Rail Bipod Adapter $8.34 - Tri-Rail Bipod Adapter for SD96 and UTG Shadow OPS rifles

Airsoft Battery Adapter Large to Mini Tamiya $4.79 Miniplug adapter allows a large plug charger connect to a small plug battery.

HW100 Single-Shot Adapter, .177 Cal $59.99 Single-shot adapter .177 cal Fits Beeman HW100 repeater air rifles Shoot your HW100 repeater as a single-shot with this adapter If you prefer to shoot your Beeman HW100 air rifle as a single-shot, you’ll need this adapter. This fits in the same slot as the magazine. This is for .177 cal. pellets only.

HW100 Single-Shot Adapter, .22 Cal $59.99 Single-shot adapter .22 cal Fits Beeman HW100 repeater air rifles Shoot your HW100 repeater as a single-shot with this adapter If you prefer to shoot your Beeman HW100 air rifle as a single-shot, you’ll need this adapter. This fits in the same slot as the magazine. This is for .22 cal. pellets only.

AirForce 11mm-to-Weaver Adapter $39.9 11mm (or 3/8") dovetail-to-Weaver/Picatinny adapter 3.04" clamping & mounting length .69" high 4.12" overall length 4 hex screws secure the base Includes a hex wrench Use on AirForce rifles and pistols or any other airgun or rimfire that has a 3/8" or 11mm dovetail. Weaver/Picatinny scope bases offer a much tighter grip on your scope mounts. This would be an especially good addition to any hard-recoiling spring-piston rifle. The cross slots deliver extra gripping area for the rings, making it almost impossible for the scope mount to shift. You may need to buy two of these adapters, depending on the length of the scope mount you’re using and on the length of the scope rail to which you’re attaching this adapter.

Probe Adapter, Fits Shinsung & Sam Yang PCP Guns $9.59 Probe adapter fits Shinsung & Sam Yang PCP guns

Airforce Braided Steel Hose, Quick-Disconnect, Fits Older Airforce Refill Clamp & Hand Pump $36 Braided steel hose Quick-disconnect fitting Fits older Airforce refill clamp with gauge (U1012) & older AirForce hand pump (U1014) To fill Talon/Condor rifles, use a refill adapter with quick-disconnect nipple (U1013) to attach the hose’s quick-disconnect This braided steel hose will stand up to many years of use without compromising its integrity. Strong, flexible, reliable…and safe. Current AirForce high-pressure fill devices come with a hose. The older pumps and scuba yokes did not come with a hose. If you have one of the older units and need to replace your hose, this is the item to get.

Airforce Refill Adapter, Quick-Disconnect Nipple $24 AirForce refill adapter Quick-disconnect nipple For filling your AirForce Talon and Condor rifles from any air source that has a female quick-disconnect fitting.

Carbon Fiber Tank, 4500 psi, 88 cu ft $839.99 DOT-approved Carbon fiber filament wound over aluminum bladder 88 cu ft 4500 psi max pressure 11.3 lbs dry weight Includes: Hose with 1/8" BSPP threads on both ends Seal washer Hose has an inline gauge (eliminates use of a yoke) Air Venturi female quick-disconnect adapter with 1/8" BSPP male threads on one end This is not a scuba tank. It’s a carbon fiber tank, which is also called an scba tank, and has a high-pressure scba valve…like the one firefighters use on their scba tanks. Many dive shops do not have the ability to fill these tanks. In some towns, the fire department has a compressor that can fill a high-pressure carbon fiber tank, as firefighters use smaller scba tanks for breathing equipment during rescues. You might want to approach your local fire department and ask if they would be willing to fill your high-pressure carbon fiber/scba tank from their compressor. Another alternative is to contact a local paintball store, as paintballers use carbon fiber tanks to fill their markers. If the only alternative you have is to fill your high-pressure carbon fiber scba tank at a dive shop, a 1/8" BSPP male to DIN female adapter (our part # AA-Z2128-300) can temporarily replace the hose on the valve adapter so the dive shop can fill your tank.

AirForce 1/4" male BSPP Adapter, For AirForce Guns $18.3 1/4" male BSPP adapter Connects your AirForce rifle to a scuba tank or hand pump

UHC Pellet Feeder Adapter for Super 9 bolt action rifle $7.19 Pellet Feeder Adapter for Side-Mount Magazine (Super 9 bolt action rifle by NeonFire-UHC)

Quick-Disconnect Male Fitting + O-Ring $23.99 Male quick-disconnect fitting with o-ring Converts Sam Yang, Sumatra & Career rifles to connect to the Benjamin 3-stage hand pump Connects to female quick-disconnect (Quickadap1EM1B), which has 1/8 BSPP threads & fits most scuba tank & hand pump adapter hoses Installation instructions: To start the old fill port turning, insert the round shaft of a phillips screwdriver into the fill port hole and turn the port counterclockwise. Once the port loosens, you can take it off by hand the rest of the way. After you’ve unscrewed your old fill port from the end of your tank, thread in this quick-disconnect fitting & o-ring (included) to seal the connection. No need to depressurize the tank because the tank has a check valve.

909 Big Bore Probe Adapter, Fits older 909 rifles only $9.59 Probe adapter fits older Sam Yang 909 rifles. It is 1/8" BSPP male on one end and a female thread pattern on the other end, which fits the older 909 probe. It attaches to a hose that ends in a 1/8" BSPP female fitting. We suggest using Teflon tape to connect this probe to an adapter.

AirForce Scuba Refill Clamp with Gauge $78.6 Scuba yoke fill station 1/4" AirForce tank adapter Fits scuba tank with standard k-valve 1" diameter micro-gauge reads from 1-5,000 psi across one-third of the gauge face Product may not look exactly like the one shown. Universal! Fits long- & short-necked scuba tanks!

TSD Sapien Arms Ver2 Aluminum Propane Adapter, Blue $27 The TSD Sapien Arms Ver2 Aluminum Propane Adapter is an excellent, user friendly alternative for gas-powered airsoft products. This trendsetting adapter features a thread-on cap with loop, silicon oil reservoir, and a texturized body for easy grip feel. The adapter does not need to be to be detached from the propane tank to apply silicon oil. For airsoft use only. Light silicon oil not included. Users MUST use silicon oil with this product.

Hawke Sport Optics 1-Pc Adapter, 3/8" to Weaver Rail $21.59 Hawke Sport Optics 1-pc adapter 3/8" to Weaver rail* Rail has some elevation built in to it Includes a rail and a hex wrench Black *3/8" is approximately 9.5mm, but this adapter has enough room in it to accommodate up to 11mm. If you need to convert your air gun’s 3/8" or 11mm dovetail to a Weaver, this 1-piece rail will do it and offer a firm, secure foundation for your optics. When selecting the mount for your scope, remember to account for the increased elevation offered by this adapter.

TSD Sapien Arms Ver2 Aluminum Propane Adapter, Red $27 The TSD Sapien Arms Ver2 Aluminum Propane Adapter is an excellent, user friendly alternative for gas-powered airsoft products. This trendsetting adapter features a thread-on cap with loop, silicon oil reservoir, and a texturized body for easy grip feel. The adapter does not need to be to be detached from the propane tank to apply silicon oil. For airsoft use only. Light silicon oil not included. Users MUST use silicon oil with this product.

TSD Sapien Arms Ver. 2 Aluminum Propane Adapter, Green $27 The TSD Sapien Arms Ver2 Aluminum Propane Adapter is an excellent, user friendly alternative for gas-powered airsoft products. This trendsetting adapter features a thread-on cap with loop, silicon oil reservoir, and a texturized body for easy grip feel. The adapter does not need to be to be detached from the propane tank to apply silicon oil. For airsoft use only. Light silicon oil not included. Users MUST use silicon oil with this product.

Harris Sling & Bipod Adapter, Fits Air Arms S200 Target & Crosman Challenger Rifles $23.99 Adapter for sling or bipod attachment Fits bottom rail of S200 Target air rifle & the Challenger’s bottom rail on the forestock (with a sling/bipod adapter) Ideal for 10-meter shooters

Air Arms PCP Adapter, 1/8" BSPP Male to DIN Female $30 PCP adapter 1/8" BSPP male to DIN female For PCP guns that need a DIN connection to 1/8" BSPP hoses for pump or scuba tank adapters 300 bar max rating

Hawke Sport Optics 2-Pc Adapter, 3/8" to Weaver Rail $29.99 Hawke Sport Optics 2-pc adapter 3/8" to Weaver rail* Includes 2 rails and a hex wrench Black *3/8" is approximately 9.5mm, but this adapter has enough room in it to accommodate up to 11mm. If you need to convert your air gun’s 3/8" or 11mm dovetail to a Weaver, this 2-piece set will do it and offer a firm, secure foundation for your optics.

AirForce CO2 Adapter, Fits Condor, Talon & Talon SS $119.94 Fits all Condor, Talon and Talon SS rifles Over 1,000 shots per CO2 tank Ideal for shooting indoors Easy to switch back to air No handpump or scuba tank required Quieter operation How to switch from high-pressure air to CO2: Unscrew your AirForce air tank from your rifle Screw in the CO2 adapter into your rifle Screw in the filled tank into the other end of the adapter Start shooting!

BSA Single-Shot Adapter, .177 Cal, Fits R-10, Scorpion, Ultra $41.99 Single-shot adapter .177 cal Fits BSA R-10, Scorpion and Ultra air rifles If you prefer to shoot your BSA repeating air rifle as a single-shot, this adapter is what you need. Many airgunners prefer single-shots because they feel it gives them better control. Also, single-shot guns tend to be more accurate than repeaters.

BSA Single-Shot Adapter, .22 Cal, Fits R-10, Scorpion, Ultra $41.99 Single-shot adapter .22 cal Fits BSA R-10, Scorpion and Ultra air rifles Your BSA multi-shot air rifle can be shot with single pellets if you prefer. Just pop in this adapter, load a pellet and you’re off! Some airgunners feel that single-shot air guns offer better accuracy. Try it both ways and see what works best for you.

IZH Drozd Adapter, 1/2"x28TPI, Thread Protector $30.58 The Drozd is one of the most exciting BB guns to hit the market in a long time! If you’re lucky enough to have one and want to mount an accessory that is threaded 1/2"x28TPI, such as our unrestricted fake suppressor, then this is the part you need. To ensure exact thread alignment, the threaded adapters are CNC-machined to precision tolerances from a solid steel rod in one lathe operation. They are hot salt blued to match the gun. The included steel thread protector covers the threads on your barrel when no accessory is mounted. Easy installation in place of the existing barrel nut. No tools or modifications are required. Adapter assembly includes one adapter and one knurled thread protector. This is the way the gun should have come from the manufacturer! Give your Drozd a tactical look… order a threaded adapter today!

Shooting Chrony USB to RS232 Serial Adapter with detachable USB cable $38.39 Serial Communication Parameters Detachable 10cm USB cable RxD, TxD LEDs for monitoring port status & easy diagnostics COM Port Number can be changed to COM1 to COM4 to support HyperTerminal, or any other COM port number required Industry Standard FTDI chip set & drivers for maximum compatibility Supports Windows Vista, XP, 2003, 2000, ME, 98, Linux, MAC-OS8, 9,X Full RS-232 modem control signals RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND Powered by USB port. No external power adapter required Attractive translucent plastic design Serial port speed of up to 230K bps Adds one RS-232 serial port by connecting to USB port Installed as standard Windows COM port FIFO: 128 byte transmit buffer 384 byte receive buffer Works with USB 1.1 & 2.0 host port One DB9 male connector One Mini-CD Driver Software The USB Serial Adapter is designed to make serial port expansion quick and simple. Connecting to a USB port on your computer or USB hub, the USB Serial Adapter instantly adds serial communication port to your system. By taking advantage of the USB bus, the USB Serial Adapter make it easier than ever to add serial port and serial device to your system with easy plug-and-play and hot plug feature. Adapting the new technology, the serial port expansion now takes the new bus with easy and convenient connectivity. Plugging the USB Serial Adapter to the USB port, the adapter automatically detected and installed. There are no IRQ & COM port conflicts, since the port doesn�t require any additional IRQ, DMA, memory as resources on the system. The RS-232 port function as native windows COM port, and it is compatible with Windows serial communication applications. Each port is individually configurable.

BKL 2-Pc 3/8" or 11mm Dovetail to Weaver Adapter, 1" Long, Matte Black $34.2 3/8" or 11mm dovetail to Weaver adapter (rail accepts Weaver rings) 1" long 2 screws per base Matte black

Benjamin Air Tank, 2000 psi Output $191.99 Benjamin air tank Designed for high-pressure air up to 3000 psi Regulated to 2000 psi output (specifically for the Benjamin Discovery & Marauder and the Crosman Challenger) 72 cubic inches Fills a 2000 psi rifle 6 to 8 times from one tankful To fill the Discovery, Marauder or Challenger, you’ll also need FAH002 (Dual Fuel adapter) Do not use this tank with paintball guns Includes male quick-disconnect coupling (can be filled with the Benjamin hand pump) 4.5" outside dia., 11.5" long, 4.40 lbs.

Sumatra 2500, 500cc Reservoir $695.99 More Shots From One Fill Up!

AirForce Scuba Tank Adapter K-valve, Steel Hose $102.6 AirForce Airguns scuba tank adapter K-valve Pressure gauge goes up to 3,000 psi Stainless steel mesh hose* Ends in a female quick-disconnect *While the hose is stainless steel mesh, it MAY also have a black plastic cover. Which one you get depends on what we have in stock.

AirForce Scuba Tank Adapter, DIN Connector, Steel Hose $102.6 AirForce Airguns scuba tank adapter DIN connector Pressure gauge goes up to 3,000 psi Stainless steel mesh hose* Ends in a female quick-disconnect *While the hose is stainless steel mesh, it MAY also have a black plastic cover. Which one you get depends on what we have in stock.

TSD Sapien Arms Propane Adapter, Plastic, .25 oz. Silicone Oil $13.14 Sapien Arms propane adapter High-strength ABS plastic Lubricates & cleans Enhances performance Easy-to-locate fluorescent green finish Revolutionary design with silicone oil reservoir Cap-retainer loop Does not need to be detached from propane tank to apply silicone oil Excellent alternative for gas airsoft products Includes .25 oz. light silicone oil For airsoft use only

Air Venturi Female DIN adapter for Foster quick-disconnect, Fits FWB, Walther Dominator, Older HW100 Rifles & Other 10M Guns $31.19 Female DIN adapter Foster quick-disconnect Fits FWB, Walther Dominator, older HW100 rifles & many other 10m guns

UTG 3/8" Dovetail-to-Weaver/Picatinny Rail Adapter, 2pcs $8.39 3/8" & 11mm dovetail-to-Weaver/Picatinny rail adapter Fits 3/8" and 11mm dovetails on airguns and rimfire guns 1" long .93" wide .24" high .18 oz 2 adapters If your air gun or rimfire gun has a scope dovetail that measures either 11mm or 3/8" (approx. 9.5mm), you can use this lightweight aluminum adapter to attach your Weaver and Picatinny mounts to your smaller 11mm and 3/8" dovetails. This clever device clips into the base of your Weaver or Picatinny mount (both 1-pc mounts and 2-pc mounts), thereby reducing the size of the clamping jaws on the mount! A very easy way to make your mounts more useful for a wider range of guns. In fact, you can leave your optics in the mounts and move them from gun to gun! You’ll still have to resight the gun after attaching the scope, but you won’t have to reset or retighten the scope in the mount.

Air Venturi Female Quick-Disconnect Adapter, 1/8" BSPP Male Threads, Steel, Rated to 5000 PSI $23.4 Female quick-disconnect adapter 1/8" BSPP male threads on the other end Steel Rated for 5000 PSI This female steel quick-disconnect adapter has 1/8" BSPP male threads on the other end. Rated to a whopping 5,000 PSI, it’ll work for those guns that run on much higher pressure air.

Propane Adapter for Airsoft Green Gas Guns $22.74 The TSD Sapien Arms Ver2 Aluminum Propane Adaptor is an excellent, user friendly alternative for gas-powered airsoft products. This trendsetting adaptor features a thread-on cap with loop, silicone oil reservoir, and a texturized body for easy grip feel. The adaptor does not need to be to be detached from the propane tank to apply silicone oil. For airsoft use only. Light silicone oil not included. Users MUST use silicone oil with this product!

B-Square 17021 11mm-to-Weaver Adapter, Adjustable $65.94 11mm to Weaver base, adjustable

BKL 3/8" or 11mm Dovetail to Weaver Adapter, 4" Long, For Bolt-Action Guns, Matte Black $51.3 3/8" or 11mm dovetail to Weaver adapter (rail accepts Weaver mounts) 4" long Fits bolt-acton guns (right-hand or left-hand clearance) Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 3/8" or 11mm Dovetail to Weaver Adapter, 4" Long, Matte Black $51.3 3/8" or 11mm dovetail to Weaver adapter (rail accepts Weaver mounts) 4" long 6 screws on base Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 3/8" or 11mm Dovetail to Weaver Cantilever Adapter, 4" Long, Matte Black $45.6 3/8" or 11mm dovetail to Weaver adapter (rail accepts Weaver mounts) 4" long 2 screws in base Ideal for dot sights Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

Air Venturi Tank Adapter Assembly, 4500 psi, for High-Pressure SCBA Tanks $105 Tank adapter assembly Fits high-pressure scba (self-contained breathing apparatus) tank, including the Air Venturi carbon fiber tank 4500 psi Includes bleeder, hose and female quick-disconnect coupling Does not include a manometer (air pressure gauge) Fits the Air Venturi carbon fiber tank–AV-4500HPT [PY-A-350]. Inline manometer (air pressure gauge) sold separately–AV-00031 [PY-A-3865]. Suitable for connecting your high-pressure scba tank to a precharged pneumatic air rifle.

UTG Drooper Scope Rail, 11mm-to-Weaver Adapter, Compensates for Droop & Stops Scope Shift $22.74 UTG DNT06 scope mount base Attaches to rifle’s 11mm scope rail Fits any rifle with an 11mm scope base…either dovetail grooves or a raised rail Decreases barrel droop with 10" upward compensation at 30 yds Stops scope shift–forever! Scope base provides a secure foundation for Weaver/Picatinny mounts 4 hex screws firmly attach base to your Diana rifle Dual scope-stop holes to stop movement 0.68" saddle height 0.78" total height 1" wide 4.72" long 11 slots to accommodate various eye relief adjustments 3.8 oz. Aircraft-grade aluminum Includes 2 hex wrenches, hex screw and set screw Barrel droop is a common issue in some air guns, but it can make it difficult to use a scope. To get the most accuracy from your air rifle, mount a scope, but don’t put it directly on the airgun’s original rail. Instead, mount this great adapter, which offers 10" of upward compensation (at 30 yds.), and then mount your scope. You’ll wonder how you ever got along without it!

UTG 11mm-to-Weaver Adapter, Vertical Scope Stop Pin $11.99 Base attaches to 11mm dovetail, top is a Weaver/Picatinny scope rail 3.94" long 9 slots for easy adjustments 2 hex screws attach 11mm dovetail to your gun’s 11mm scope base Incl. vertical scope stop pin

AirForce Condor CO2, Incl adapter, 12-oz. CO2 tank $713.94 1,000+ shots on one CO2 tank!

AirForce Condor CO2, Incl adapter, 20-oz. CO2 tank $719.94 1,000+ shots on one CO2 tank!

AirForce 1/8" and 1/4" BSPP Refill Adapter set $27.9 For AirForce air rifles. Fits the FX/Logun three stage pump.

AirForce Talon SS CO2, Adapter & 20-oz. CO2 Tank $599.94 1,000+ shots on one CO2 tank!

AirForce Talon CO2, Incl adapter, 12-oz. CO2 tank $563.94 1,000+ shots on one CO2 tank!

AirForce Talon CO2, Incl adapter, 20-oz. CO2 tank $571.14 1,000+ shots on one CO2 tank!

AirForce Talon SS CO2, Adapter, 12-oz. CO2 Tank $593.93 1,000+ shots on one CO2 tank!

Air Arms Air Tank, Fits S200/T200 Air Rifles with Removable Tanks $143.94 Air tank Fits Air Arms S200/T200 air rifles with removable tanks If your Air Arms S200/T200 air rifle has a removable tank, this extra tank will be real convenient. Instead of carrying a pump or scuba tank plus the fill adapters, just fill up another tank and take it with you.

Feinwerkbau Compressed Air Cylinder, Fits P44 Air Pistol $323.99 Compressed air cylinder Fits P44 air pistol Does NOT fit the P44 short Instead of toting fill devices for your FWB P44 air pistol, just fill your tank at home. No pumping, no hoses…just screw in and start shooting. This does not fit the P44 short air pistol.

Replacement Air Reservoir, Fits Feinwerkbau P700 Air Rifles $387.46 Feinwerkbau replacement air reservoir Built-in manometer (air pressure gauge) 2900 psi max air pressure (200 bar) Fits all Feinwerkbau P700 PCP air rifles Instead of carrying a bulky fill tank or a hand pump, take along a spare air reservoir. Fill it up before your match and avoid lugging extra baggage. Same high-quality construction as the original tank that came with your FWB P700 air rifle.

Air Venturi Inline Air Pressure Gauge, 0 to 4500 psi $55.19 Inline air pressure gauge Measures up to 4500 psi Female quick-disconnect Male fitting If you use high-pressure fill devices for your precharged pneumatic guns and don’t have a pressure gauge on your fill device, this will do the job. The inline air pressure gauge fits the Air Venturi carbon fiber tank, AV-4500HPT.

ICS Olympic Arms PCR-4/Mod 4 High Capacity 450 Round Metal Magazine $34.74 450 round high capacity magazine Compatible with Olympic Arms, ICS guns This magazine is not recommended for use with the KWA AEGs Easy to fill, just pour in 450 rounds through the top hatch. Easy winding spring dial on the bottom keeps tension on the ammo for smooth feeding.

Hammerli Pneuma Extra Air Tank, Also Fits HaleStorm & AT44PA Rifles $131.99 Don’t carry a scuba tank or pump when you go hunting or plinking! Carry an extra tank that you filled up at home! It’s lighter than fill devices and will let you keep shooting instead of filling. Fits the Hammerli Pneuma, Air Venturi HaleStorm and Hatsan AT44PA air rifles.

300 Round DPMS On Duty Kit Rifle Magazine $22.74 Will fit in: CG18780, 18980. Build material: molded polycarbonate. Color: Balck Easy to fill, just pour in 300 rounds through the top hatch. Easy winding spring dial on the bottom keeps tension on the ammo for smooth feeding. Made in China

Air Venturi Microbore Hose, DN2, Up to 4500 PSI, 1/8" BSPP Connectors, 24" Long $35.99 DN2 microbore hose Fits high pressure tanks and hand pumps Max operating pressure is 4500 psi 1/8" BSPP male & female connectors 24" long Microbore hoses are a great way to get air into your gun without having to fill up a large-diameter hose, which is what traditionally comes with fill equipment such as scuba tanks and hand pumps. Our microbore hose fills your gun faster so you can spend more time shooting and less time filling.

Air Venturi Thread Converter + Hose $29.99 Hose + adapter for AirForce Airguns scuba tank & hand pump One end has 1/4 BSPP male threads to fit the female threads of the AirForce scuba tank adapter or AirForce hand pump The other end has 1/8 BSPP female threads & fits the hose with 1/8 BSPP male threads Hose ends in 1/8 BSPP female thread for use with 1/8 BSPP filling adapters or our female quick-disconnect coupling Includes flexible hose & 2 O-rings (wide rubber O-ring is used with AirForce 3-stage hand pump; bonded metal O-ring is used with AirForce scuba tank adapter)

Competition Electronics Indoor Lighting System, Fits ProChrono Chronographs $71.99 Indoor lighting system Fits all ProChrono digital chronographs Provides optimum performance indoors or in low light Portable & fast setup Patented electronic design eliminates the need for light bulbs Red LED "on" indicator lights 120V AC 60Hz adapter input 24V DC 200 mAh adapter output 200 mAh power consumption 120V AC adapter* included *Can also operate on a 24V DC power source, such as two 12V batteries wired in a series. Whether you shoot indoors or out, you’ll need this supplementary lighting kit at some time. It’s a good idea to have it on hand right from the start.

King Arms Green Gas, 8 oz., 12ct $131.94 King Arms green gas For use with all green gas airsoft guns For airsoft use only 12 canisters per box 8 oz. Enjoy crisp blowback recoil with every shot with King Arms green gas. Green gas lets your airsoft gun fire smoothly during intense airsoft skirmishes. Simply hold the canister upside down and match the nozzle with the magazine port to use. Fill the magazine in short spurts for best results.$28 HazMat fee included in price. Ground shipping only. ATTENTION: The nozzle of this green gas canister is NOT compatible with the extended base magazine fill ports on the WE Full Metal 1911 MEU (WE-052a) & WE Full Metal 1911 MEU w/ Rail (WE-052b) green gas pistols.

Welman 11mm-to-Picatinny Drooper Rail, 22 MOA, Fits Air Arms S410/S510 Air Rifles $91.8 11mm-to-Picatinny (MIL-STD-1913) adapter Compensates for barrel droop 22 MOA @ 100 meters Fits Air Arms S410/S510 air rifles Hard-anodized aircraft-grade aluminum Secures to your air rifle’s 11mm rail with screws A hole in the mount allows access to the magazine assembly for any needed adjustments 105 grams (3.68 oz.) Any gun can have barrel droop. This 11mm-to-Picatinny (MIL-STD-1913) adapter fits Air Arms S410 and S510 air rifles and compensates for 22 MOA of droop at 100 meters. The adapter was designed for people who shoot at longer distances. Does not fit S400 or S500 air rifles because the cutout for the loading port requires a different relief.

Evanix Replacement Probe, Fits Newer Evanix Renegade Carbine, Rainstorm, Blizzard, Speed & Max Air Guns $23.99 Probe for filling air reservoir Fits Evanix Renegade carbine (NOT the long gun), Rainstorm and Blizzard long guns, Speed rifle and Max bullpup Fits newer models only Does NOT fit Evanix Renegade long gun or any other gun except for those listed above Own a newer Evanix airgun that uses a probe to fill the reservoir? The newer models use a longer probe. This probe fits them.

Replacement Probe, Fits Older AR6 & Renegade PCP Airguns $23.06 Probe for filling air reservoir Fits Evanix AR6 Hunting Master rifle and pistol & Renegade rifle Fits older models Does NOT fit any other Evanix rifle or pistol (Blizzard, carbines, Speed, Conqest, Max, etc.) Own an older AR6 or Renegade? The newer models use a longer probe. This probe fits the earlier models, which require a shorter air fill probe. Get the right probe for your air gun.

SIG Sauer 556 AEG Mag, 400rd $22.74 SIG Sauer 556 AEG Mag, 400rd Magazines will fit in and are compatible with: Sig Sauer 556 (item # 28907) Mod4�s/Mod16 AEG�s High capacity magazines for electric guns are a must for any serious airsofter. The high-cap magazines look exactly the same as the standard magazines but can hold up to 8 times the amount of ammo. Easy to fill, just pour in 400 rounds through the top hatch. Easy winding spring dial on the bottom keeps tension on the ammo for smooth feeding.

SIG Sauer 556 AEG Mag, 300rd $17.94 SIG Sauer 556 AEG Mag, 300rd Will fit in: Sig Sauer 556 (item # 28907) High capacity magazines for electric guns are a must for any serious airsofter. The high-cap magazines look exactly the same as the standard magazines but can hold up to 8 times the amount of ammo. Easy to fill, just pour in 300 rounds through the top hatch. Easy winding spring dial on the bottom keeps tension on the ammo for smooth feeding.

Echo1 SG 200 round Magazine $23.94 200rd Hi Capacity metal magazine for Sub Gun style guns. High capacity magazines for electric guns are a must for any serious airsofter. The high-cap magazines look exactly the same as the standard magazines but can hold up to 8 times the amount of ammo. Easy to fill, just pour in 200 rounds through the top hatch. Easy winding spring dial on the bottom keeps tension on the ammo for smooth feeding.

AirForce Quick-Detach Air Tank, Fits TalonP Air Pistols $159.6 Quick-detach air tank Fits TalonP air pistols Can be used with compressed air or dry nitrogen gas only 6.125" long Need some extra air? Don’t carry refill equipment! Get a spare tank, fill it up at home & take it with you. Simply swap the filled tank for the empty one, and you’re good to go.

Cybergun Thompson 380 Magazine $23.99 For Thompson Airsoft Electric Full-Metal Body AEGs (item # CG43900, CG43901, CG43907, CG43908,CG71015). Holds 380 rounds.Easy to fill, just pour in 380 rounds through the top hatch. Easy winding spring dial on the bottom keeps tension on the ammo for smooth feeding. This magazine will not work with the Thompson Plastic Body AEGs: CG430902, CG43903, CG43904, CG43905, CG43906.

H&K G36C 440 Round Airsoft Magazine $41.99 This is the H&K G36C High Capacity 440 Round Magazine for use with the H&K G36C (Item#:HK-2279000), Echo 1 SM-C airsoft, TSD Tactical SG-Series AEG’s. Easy to fill, just pour in 440 rounds through the top hatch. Easy winding spring dial on the bottom keeps tension on the ammo for smooth feeding. Best of all these are absolutely perfect in look and feel. Not compatable with dual power G36C – HK-2261230

FAMAS 300 Round AEG Magazine $19.14 For FAMAS Airsoft Electric Rifle (item #CG400902). Holds 300 rounds. Easy to fill, just pour in 300 rounds through the top hatch. Easy winding spring dial on the bottom keeps tension on the ammo for smooth feeding. Also compatible with Tokyo Marui FAMAS. Attention customers! The door to the BB loading reservoir is difficult to open with just your fingers. We recommend using a firm, thin object to lift the lid open to avoid breaking your nails or hurting your hands.

TSD ABS AK Banana Magazine, 550rds $17.94 JB Intl’ AK47 ABS hi-cap magazine Materal: ABS Plastic Color/Finish: Black/Matt-Black Design: Standard Capacity: 550rd Easy to fill, just pour in 200 rounds through the top hatch. Easy winding spring dial on the bottom keeps tension on the ammo for smooth feeding. Application: ICS, TM, CA, G&G, TSD, SRC, etc. AK variants

UTG Deluxe M4/M15 Picatinny Rails, 2-Pack $15.54 2 Picatinny rails 4.9" long Attaches to handguard with included screws Tapered design Swivel housing adapter for quick-disconnect or bipod use Fits M4 & M15 handguards Includes Allen wrench, 10 nuts, block spacer & 6 hex screws

Air Venturi PCP Scuba Charging Set $95.99 Scuba charging set Fits k-valves Hose ends with 1/8 female BSPP No extra adapters needed if you use this for the following guns: Air Arms, Evanix, Sumatra, BAM & Sam Yang Big Bore 909 (the adapter included with these guns attaches to this set) Also fits these guns, but you’ll need to get the adapters indicated: Marauder, Discovery & Challenger rifles: you’ll need Quickadap1EM1B (female quick-disconnect adapter) Dragon Slayer, Fire 202 & 707 Ultra rifles (which come with 7/16 probes): you’ll need PYadapterEJ

Walther CSL50 Rechargeable LED Flashlight, Black $17.4 LED flashlight 20 lumen spotlight Twist on/off Rechargeable Ni-MH battery Anodized aluminum body Recharge by plugging it into your vehicle’s cigarette lighter 2" long (2-3/8" long with cigarette lighter charging adapter) Black Never be without a light in your car! This compact LED flashlight plugs into your car’s cigarette lighter, which is a 12V power outlet. Turn on your car, and the flashlight charges its battery. Turn off your car, and the charging stops. Includes a red-glow charging adapter.

Walther CSL50 Rechargeable LED Flashlight, Pink $17.4 LED flashlight 20 lumen spotlight Twist on/off Rechargeable Ni-MH battery Anodized aluminum body Recharge by plugging it into your vehicle’s cigarette lighter 2" long (2-3/8" long with cigarette lighter charging adapter) Pink Seeing more and more pink these days? It’s THE color to get. Never be without a light in your car! This compact LED flashlight plugs into your car’s 12V power outlet — the cigarette lighter. It charges while your car is running. When you turn off your car, it stops charging. Simple and convenient. Includes a red-glow charging adapter.

AireTex 45 Gasoline Air Compressor, Max 4500 PSI, Incl. Scuba Yoke & 300 DIN Hose $4314 The compressor may not look exactly like the one shown here. AireTex 45 gasoline air compressor 4500 PSI max working pressure 3-stage, 3-cylinder compressor Stainless steel valves Low-speed operation Stainless steel intercoolers & after-cooler Dual-stage water separator Purifier meets or exceeds CGA G7.1 Grade E and NFPA 1500 standards Mechanical separator removes particles, oil mist & water droplets Suitable for breathing air Purifier chamber rated for 5000 PSI operation Activated carbon removes tastes & odors Catalyst converts carbon monoxide to carbon dioxide Motor overload shutdown Hour meter 15,000 cu. ft. filtration system Includes standard scuba yoke & 300 DIN filler hose AireTex compressors are as durable and reliable as they are portable. This gasoline compressor gives you max 4500 PSI at less than 10 degrees above ambient room temperature! It takes about 23 minutes to fill an 80 cu ft air bottle. Use only for filling scuba tanks and other high-volume devices. Do not connect directly to an airgun reservoir, as it will fill too fast and heat up. When filling air bottles, do not leave the compressor unattended!

Walther Tactical Folding Knife, 3.1" Non-Serrated Silver Blade, Black Handle $23.94 Tactical folding knife 440 stainless steel blade 7.36" open 3.1" non-serrated blade .125" blade thickness 6.40 oz. Thumb stud Open assist Liner lock Aluminum scales Removable pocket clip Glass-breaker on pommel Includes a synthetic pouch Whether you’re looking for a survival knife or just another general-use edged tool, this should fill the bill. This combat folding knife will be useful in so many ways, you’ll wonder how you got along without it. Get one for your range bag, tool box and glove compartment.

S-Thunder BB Shower, Standard Barrel, Blue $71.99 BB shower shell For use with 40mm S-Thunder grenade launchers Compatible with all gas types Holds 80 BBs, 7 x 11mm paintballs or 4 x 17mm paintballs 20-30m effective range Standard barrel Blue 1.57" diameter 4.33" long 0.52 lbs This S-Thunder BB shower shell can be fired using any 40mm S-Thunder grenade launcher or be detonated by hand. You can fill this shell with paintballs, powder balls or BB pellets and operate it with any type of gas ranging from CO2 to green gas. This shower shell gives off a loud and satisfying 78-110dB explosion when triggered.

Welman 11mm-to-Picatinny Drooper Rail, 16 MOA, Fits Air Arms S410/S510 Air Rifles $91.8 11mm-to-Picatinny (MIL-STD-1913) adapter Compensates for barrel droop 16 MOA @ 50 meters Fits Air Arms S410/S510 air rifles Hard-anodized aircraft-grade aluminum Secures to your air rifle’s 11mm rail with screws A hole in the mount allows access to the magazine assembly for any needed adjustments 105 grams (3.68 oz.) Any gun can have barrel droop. This 11mm-to-Picatinny (MIL-STD-1913) adapter fits Air Arms S410 and S510 air rifles and compensates for 16 MOA of droop at 50 meters. The mount was designed for the distances usually used by field target shooters…but it’ll work for any purpose you decided to use your air rifle. Does not fit S400 or S500 air rifles because the cutout for the loading port requires a different relief.

Leapers Model 4/15 Scope Mount, Fits Carry Handle $21.54 Weaver mount Fits Model 4/15 carry handle 1" rings 3 adjustable mounting positions for flexible eye relief positioning Flattop adapter with 2 thumbscrews & clamping plate 4 screws per ring cap Made of aircraft-grade aluminum Tight tolerances create a solid fit for extreme tactical environments

JBU Fake Airsoft Suppressor, 6.75", Aluminum, Incl. Barrel Extension $71.99 JBU (MSS) modular supressor system Aluminum alloy material 14mm counterclockwise thread 5-pc set Unique JBU serial number 6.75"x1.5" This high-quality modular suppressor system by JBU will enhance the look of your airsoft gun. The modular suppressor system is made of aluminum alloy material for extra durability. The 5-piece set includes a barrel cap, forward extender, base extender, flash hider & adapter. Does not suppress the sound/noise of your gun. For airsoft use only.

Walther Tactical Folding Knife, 3.3" Partially Serrated Blade, Black $23.94 Tactical folding knife 441 stainless steel blade 7.8" open 3.3" partially serrated blade .130" blade thickness 6.40 oz. Thumb stud Open assist Liner lock Aluminum scales Removable pocket clip Glass-breaker on pommel Includes a synthetic pouch Whether you’re looking for a survival knife or just another general-use edged tool, this should fill the bill. This tactical folding knife will comfortably fit in your hand and do whatever comes its way. At this price, you can afford to include one in your glove compartment and your range bag. You’ll wonder how you ever got along without it.

Benjamin Carbon Fiber Tank, 54 cu ft, Gauge, Hose w/Female Quick-Disconnect $719.99 Benjamin carbon fiber tank 54 cu-ft capacity 4,500 psi max pressure 38" long 12" microbore hose with female quick-disconnect Built-in air pressure gauge (manometer) Bleed valve Restricted-flow manifold for controlled, precise filling Lightweight, easier to transport than a metal scuba tanks 4.625"x37" 15 lbs. This monster carbon fiber air tank will keep you in air for days, weeks…and probably months! Fill all your precharged pneumatic (PCP) air pistols and air rifles and shoot day and night. Depending on the size of your gun’s onboard reservoir, you’ll get up to 80 fills with this big boy.

Yukon NVRS Titanium 1.5×42 Night Vision Rifle Scope, Weaver Mount $551.99 This is a Gen 1 NV scope and will not stand up to heavy-recoiling firearms or magnum spring-piston airguns. The NVRS 1.5×42 is the most compact, lightweight 21.07 OZ. Affordable NVRS that Yukon provides. The NVRS line is the hunter’s best friend with its ruggedness, durability and ease of use. The ON/OFF switches for power and the built-in Infrared Illuminator are designed to prevent hand cramps and accommodate users wearing gloves. The battery powered night vision riflescope comes standard with an ON/OFF remote control for a hands-free use and a camera adapter for nighttime photography. And don’t worry about re-mounting the NVRS after each use with its standard on-rifle carrying case. The case fits around the NVRS while it is mounted on the rifle for easy storage. Each unit is fit with a flip-top objective lens covers that protects the high-quality image tubes from intense light that could damage the tubes. This versatile and affordable unit can be used for numerous outdoor activities and is perfect for the outdoor enthusiast. Included Accessories: Adapter for 35mm Cameras "On-Rifle" Carrying Case Remote On/Off Switch Weaver mount

UTG Scope Mount Base, Fits RWS Diana 48, 52, 54 & 460 Magnum with TO5 Trigger, Compensates for Droop & Stops Scope Shift $22.74 We strongly recommend that you use a 2-piece Weaver scope mount that has 4 screws on each ring cap.

UTG Scope Mount Base, Fits RWS Diana 34, 36, 38, & 45 with TO5 Trigger, Compensates for Droop & Stops Scope Shift $22.74 We strongly recommend that you use a 2-piece Weaver scope mount that has 4 screws on each ring cap.

CenterPoint Laser Boresighter, .17 to .50 Cal Guns, Min. 3.8" Barrel Needed $42.3 CenterPoint red laser boresighter Fits .17 to .50 caliber guns Also compatible with 12-, 16- and 20-gauge shotguns Works with air rifles & air pistols with minimum 3.8-inch barrel 6 adapters 6.5"x0.5"x0.5" Includes batteries Do not use on guns that have muzzlebrakes, silencers, fake silencers, shrouds or noise dampeners. CenterPoint’s red laser boresighter is battery-powered and has 6 adapter fittings for .17 to .50 caliber gun (air rifles, air pistols, firearms & airsoft guns). It also fits 12-, 16- and 20-gauge shotguns. Stop wasting time and ammo manually sighting-in your targets!

B-Square Professional Gunsmith Screwdriver Set $34.74 The 32 piece set includes: 1 magnetized driver handle with no-slip grip, 11 gunsmith ground medium and fine blade slotted bits, 3 Phillips bits, 8 hex bits, 2 torx bits, 2 posi-drive bits, 1 long 3/32" hex bit, 1 long 5/32" fine slotted bit, 1 long #1 Phillips bit, 1-1/4" socket drive adapter and comes in a sturdy molded storage case with individual compartments for each item. Special gunsmith-ground bits are perfect for quick repairs in the field or on the bench for rifles, pistols, scopes, rings, bases as well as for hunting, camping and hundreds of household uses.

Shooting Chrony LED Lamps, 2ct $143.99 Chrony LED Lamps (C.L.L.) Works with all Shooting Chrony chronographs Front and rear lamp assemblies Use indoors & outdoors For any lighting condition 14" long when assembled Incl. front & rear lamp assemblies, diffusers, 16" wire rods, 120V/220V AC adapter (12V DC output @ 500MAH) Never get wrong velocities again! The Shooting Chrony LED lamp will shine the right light on any Shooting Chrony chronograph and give correct velocity readouts at dawn or dusk, with overcast skies as well as indoors. The Chrony LED Lamp quickly attaches to the skyscreens of any Shooting Chrony. No tools required.

UTG Scope Mount Base, Fits RWS Diana Rifles, Gamo Whisper & Others $21 Fits guns with the T05 trigger. In 2011, Diana introduced the T06 trigger and it also has a longer rail. This adapter does NOT fit the guns with a longer rail. Fits RWS Diana breakbarrel rifles that have no barrel droop Also fits Gamo rifles with a raised scope rail Attaches to rifle’s 11mm scope rail Special "recoil shock shoulder" stops scope shift–forever! Hide’s rifle’s 11mm scope rail; looks professional Scope base provides secure scope mounting with Weaver/Picatinny mounts 3 hex screws attach base to your Diana rifle Includes 2 hex wrenches Does not fit RWS Diana 46 or Schutze rifles

Competition Electronics Digital USB Interface, Fits ProChrono Chronographs $89.99 Digital USB interface Fits all ProChrono digital chronographs Works with Windows 98, Windows 2000, Windows XP, Windows Vista & Windows 7 operating systems Measure velocities from multiple ProChrono digital chronographs with one PC Control panel handles all chronograph functions Read velocities from each shot string Calculate ammo, power factor & ft-lbs Export shot data & statistics to CSV and other delimited formats for use in spreadsheet programs On-screen graph of velocity strings Uses a USB computer port for a wired connection to the chronograph Computer keyboard is necessary but the mouse is optional Incl. USB adapter interface, 25-ft connection cable & program CD What a great way to string together several chronographs to quickly gather data! Especially useful for matches where maximum velocities are enforced, such as field target events.

AireTex 45 Electric Air Compressor, Max 4500 PSI, Incl. Scuba Yoke & 300 DIN Hose $4074 AireTex 45 electric air compressor 4500 PSI max working pressure 3-stage, 3-cylinder compressor Stainless steel valves Low-speed operation Stainless steel intercoolers & after-cooler Dual-stage water separator Purifier meets or exceeds CGA G7.1 Grade E and NFPA 1500 standards Mechanical separator removes particles, oil mist & water droplets Suitable for breathing air Purifier chamber rated for 5000 PSI operation Activated carbon removes tastes & odors Catalyst converts carbon monoxide to carbon dioxide Motor overload shutdown Hour meter 15,000 cu. ft. filtration system Requires 220V electrical outlet Includes standard scuba yoke & 300 DIN filler hose The AireTex 45 electric compressor is a top-rated machine that easily fills up scuba tanks and large carbon fiber tanks. The purifier is rated for 50 hours of run time. The compressor outputs 4.20 cubic feet per minute. It runs at 1100 RPM and has over 50 feet of stainless cooling coils. It takes about 23 minutes to fill an 80 cu ft air bottle. Use only for filling scuba tanks and other high-volume devices. Do not connect directly to an airgun, as it fills too fast and heats up. When filling air bottles, do not leave the compressor unattended!

IZH Drozd BB Gun Fake Suppressor $60.6 Includes suppressor, adapter and knurled thread protector. Want the suppressor look and feel for your Drozd BB gun without the expense, hassle and government oversight? Our .22LR fake suppressor is as close to a real suppressor as you can get without paying the tax stamp. It’s CNC-machined from a solid aluminum rod, given a durable liquid ceramic finish and professionally laser-engraved. Everything is identical to the real ATF-registered suppressors! Since its a fake suppressor, the gun’s report (loudness) is NOT reduced. Many shooters prefer the weight and balance improvement with the added suppressor. In fact, it’ll work on any airgun that has a 1/2"x28 TPI threaded barrel. To ensure exact thread alignment, the threaded adapters are CNC-machined to precision tolerances from a solid steel rod in one lathe operation. They are hot-salt blued to match the gun. The included steel thread protector covers the threads on your barrel when no accessory is mounted. Easy installation in place of the existing barrel nut. No tools or modifications are required.

Yukon NVRS Tactical 2.5×50 Night Vision Rifle Scope, Weaver Mount $779.99 This is a Gen 1 NV scope and will not stand up to heavy-recoiling firearms or magnum spring-piston airguns. The Yukon NVRS Tactical Internal Focus 2.5×50 uses enhanced optics, a durable, titanium body and sleek design to separate itself from any other night vision riflescope. The NVRS Tactical 2.5×50 has internal focusing ability and an ergonomic design to allow for more comfort during shooting. It is also equipped with a powerful 50mm lens to provide higher resolution and light gathering capabilities, and flip-up lens covers open to reveal quality multicoated optics and an illuminated reticle. A built-in, powerful Pulse infrared illuminator is easily activated to enhance image brightness and increase range in total darkness; a precision windage and elevation adjustment and remote are additional features. The NVRS Tactical 2.5×50 is also digital camera adaptable with the digital camera accessory; other accessories include a laser pointer, AK adapter, IR flashlight and doubler lens, which are all sold separately. The NVRS Tactical 2.5×50 is backed by Yukon’s Limited Lifetime Warranty. Magnification: 2.5x Lens diameter: 50mm Field of view: 15 degrees Resolution, typical(lp/mm): 32-36 Focus range(yd): 1 to infinity Eye relief: 45mm Diopter adjustment: +4,-4 Detection range(yd): up to 230 Recognition range(yd): up to 120 IR illuminator effective distance(yd): up to 100 Reticle type: illuminated red-green duplex Reticle windage/elevation adjustment: 1/2 MOA per click Power supply; battery type feed voltage: (2) AA Estimated power life, w/out IR: up to 50 hours Operating temperature: -22 to +122 (f) Dimensions: 10.0" x 3.1" x 3.3" Weight: 33.5 oz Weaver mount