Cocker Threads

need help with the barrel of the paintball thread What size?

I will buy a barrel on the internet but I have to select the right thread, does anyone know what threads you need? ex. Cocker, Spyder, Tippmann, or ion / impulse I buy a barrel on the internet for my Proto Slg but I have to select the strings on the right, does anyone know what thread it takes? ex. Cocker, Spyder, Tippmann, or ion / impulse

The Proto SLG uses Autococker threaded barrels.

Tom Kaye Interview(Air Gun Designs) 2002

Dewey .177-.20 Cal Cleaning Jag, 5/40 Male Threads, Brass $4.8 .177 & .20 cal. brass cleaning jag 5/40 male threads Over-use can damage some bores! Do not use on brass bores

Air Venturi G4 Hand Pump, Hose with 1/8" BSPP Threads $239.99 G4 hand pump Pumps to 3,335 psi/230 bar (use only the correct pressure rated for your gun) 23" hose ends in 1/8" BSPP threads Tube lock prevents separation during transport Moisture filter Ergonomically designed handle Compartment in handle holds spare parts 1/8" BSPP threads Wide footplate with adjustable pumping angle

Air Venturi Female Quick-Disconnect Adapter, 1/8" BSPP Male Threads, Steel, Rated to 5000 PSI $23.4 Female quick-disconnect adapter 1/8" BSPP male threads on the other end Steel Rated for 5000 PSI This female steel quick-disconnect adapter has 1/8" BSPP male threads on the other end. Rated to a whopping 5,000 PSI, it’ll work for those guns that run on much higher pressure air.

Air Venturi Male Quick-Disconnect, 1/8" BSPP Female Threads, Steel, Rated to 5000 PSI, Incl. Delrin Seal $11.94 Male quick-disconnect coupling 1/8" BSPP female threads on the other end Steel Rated for 5,000 psi Includes Delrin seal Delrin seal stops leakage!

Brownells Bronze Bore Brush, Rifle, .177 Cal $8.39 .177 cal. rifle bore brush Phosphor bronze Looped & wound steel shank 5-40 threads

Air Venturi Muzzle Protector, Fits AirForce Condor & Talon Bounty Hunter, 1/2"x28 TPI $15.59 Muzzle protector Fits AirForce Condor & Talon Bounty Hunter guns 1/2"x28 threads per inch

Air Venturi Thread Converter + Hose $29.99 Hose + adapter for AirForce Airguns scuba tank & hand pump One end has 1/4 BSPP male threads to fit the female threads of the AirForce scuba tank adapter or AirForce hand pump The other end has 1/8 BSPP female threads & fits the hose with 1/8 BSPP male threads Hose ends in 1/8 BSPP female thread for use with 1/8 BSPP filling adapters or our female quick-disconnect coupling Includes flexible hose & 2 O-rings (wide rubber O-ring is used with AirForce 3-stage hand pump; bonded metal O-ring is used with AirForce scuba tank adapter)

Blue #242 Thread-Locker $19.5 Medium strength, 1700 psi. Blue color is best for scope mounting and most gunsmithing applications. Fills fine threads without binding. Locks threaded fasteners against vibration loosening. Prevents leaks and rusting of threads. Bond can be broken loose without heat. Parts disassemble with hand tools. Ideal for fasteners 1/4" to 3/4". Degrease parts thoroughly before using. 6ml tube.

Airgun Oiling Needle $6.9 Hollow stainless steel four-inch needle for easy lubrication through air vent or spring slot without disassembly or mess. Each type of oil should have a different needle. Needle fits a bottle with a cone-shaped tip that has threads.

Axsor PCP hand pump $238.8 3-stage hand pump Pumps to 3000 psi Integral air pressure gauge Built-in moisture trap Includes a hose ending in female 1/8" BSPP threads Buy optional adapters for pumping AirForce and other brands of PCP guns

Air Venturi 1/8" BSPP Self-Centering Bonded Seal, .375" Inside Diameter $5.94 1/8" BSPP seal Self-centering bonded seal Seals against high-pressure air leaks Use between 1/8" BSPP connections with flat mating surface around threads Reusable Buna-N (nitrile) seal inside a steel washer .375" inside diameter Reliable up to 4,500 psi (310 bar) When compressed, forms a seal between the flat surfaces around the fastener shank.

UTG Heavy Duty Elite Law Enforcement Pistol Belt with Dual Mag Pouches – Black $11.99 Durably designed for use by elite force, law enforcement and web belt enthusiasts with a modern and cool look. 2 inches wide with flexible and high quality adjustable Quick Release Buckle System. Sewn with reinforced threads and double-edge stitched for extra durability. Two extra modern style horizontal magazine pouches with buckle snap closures. Belt is fully adjustable using velcro. About 50 inches in length. Ideal for storing extra magazines or CO2 cartidges.

JBU Fake Airsoft Suppressor, 4.75" Long, Aluminum, Orange Tip $41.99 Fake airsoft supressor Aluminum alloy material 14mm counterclockwise thread JBU laser marking 4.75" long Extend the outer barrel of your airsoft gun with this fake supressor by JBU. The fake airsoft supressor has 14mm counterclockwise threads and easily attaches to the outer barrel of your gun for a unique look in the battlefield!

Air Venturi Flash Suppressor, Fits AirForce Bounty Hunter Air Rifles, 1/2"x28tpi $23.94 Flash suppressor Fits AirForce Bounty Hunter air rifles 1/2"x28tpi (internal threads) AirForce Bounty Hunter air rifles come with our custom flash hiders. When we sell a Bounty Hunter rifle, we have to thread the barrel to fit the flash hider. If you already have a threaded barrel on your Bounty Hunter and need a different or spare flash hider, this will fit. If you’re ordering a Condor, Talon or Talon SS (or an extra AirForce barrel) at the same time and want us to thread the outside of your barrel (for a minimal fee), then click the "Add Service" button.

Quick-Disconnect Male Fitting + O-Ring $23.99 Male quick-disconnect fitting with o-ring Converts Sam Yang, Sumatra & Career rifles to connect to the Benjamin 3-stage hand pump Connects to female quick-disconnect (Quickadap1EM1B), which has 1/8 BSPP threads & fits most scuba tank & hand pump adapter hoses Installation instructions: To start the old fill port turning, insert the round shaft of a phillips screwdriver into the fill port hole and turn the port counterclockwise. Once the port loosens, you can take it off by hand the rest of the way. After you’ve unscrewed your old fill port from the end of your tank, thread in this quick-disconnect fitting & o-ring (included) to seal the connection. No need to depressurize the tank because the tank has a check valve.

IZH Drozd Adapter, 1/2"x28TPI, Thread Protector $30.58 The Drozd is one of the most exciting BB guns to hit the market in a long time! If you’re lucky enough to have one and want to mount an accessory that is threaded 1/2"x28TPI, such as our unrestricted fake suppressor, then this is the part you need. To ensure exact thread alignment, the threaded adapters are CNC-machined to precision tolerances from a solid steel rod in one lathe operation. They are hot salt blued to match the gun. The included steel thread protector covers the threads on your barrel when no accessory is mounted. Easy installation in place of the existing barrel nut. No tools or modifications are required. Adapter assembly includes one adapter and one knurled thread protector. This is the way the gun should have come from the manufacturer! Give your Drozd a tactical look… order a threaded adapter today!

Gamo Competition Target $45.54 Competition target Corrosion-resistant powder coating Designed for 1-2 shooters Easy to assemble For use with all airguns up to 1000 fps Quick disassembly for storing or transporting Do not use with steel BBs. Use only with lead airgun ammo Tired of shooting at cans? Try a fun spinner! This sturdy unit has a metal powder-coated frame that will deliver hours of shooting pleasure. Shoot at the spinners sticking out on the sides, and the horizontal rod with screw threads will turn. As the threaded bar turns, it sends the horizontal target moving one way or the other. Shoot the spinner at the top, and it’ll turn the threaded rod in one direction. Shoot the spinner at the bottom, and the threaded rod turns in the opposite direction. There are 2 spinners, each attached to one threaded horizontal rod. Compete against another shooter for hours of fun. Or shoot by yourself, switching between spinners. Loads of fun!

Carbon Fiber Tank, 4500 psi, 88 cu ft $839.99 DOT-approved Carbon fiber filament wound over aluminum bladder 88 cu ft 4500 psi max pressure 11.3 lbs dry weight Includes: Hose with 1/8" BSPP threads on both ends Seal washer Hose has an inline gauge (eliminates use of a yoke) Air Venturi female quick-disconnect adapter with 1/8" BSPP male threads on one end This is not a scuba tank. It’s a carbon fiber tank, which is also called an scba tank, and has a high-pressure scba valve…like the one firefighters use on their scba tanks. Many dive shops do not have the ability to fill these tanks. In some towns, the fire department has a compressor that can fill a high-pressure carbon fiber tank, as firefighters use smaller scba tanks for breathing equipment during rescues. You might want to approach your local fire department and ask if they would be willing to fill your high-pressure carbon fiber/scba tank from their compressor. Another alternative is to contact a local paintball store, as paintballers use carbon fiber tanks to fill their markers. If the only alternative you have is to fill your high-pressure carbon fiber scba tank at a dive shop, a 1/8" BSPP male to DIN female adapter (our part # AA-Z2128-300) can temporarily replace the hose on the valve adapter so the dive shop can fill your tank.

Hill Pump MK3, Up to 3300 PSI $347.99 Hill hand pump 3-stage pump Up to 230 bar/3,300 psi Gen 3 pump requires less effort Field-stripped in 5 mins. Dry-Pac system removes 90% of harmful moisture Includes Dry-Pac & hose ending in 1/8" bspp female threads Made in England Hill is known in the industry for making superior hand pumps. They’ve been producing commercial pumps for over 170 years and have applied their industry knowledge to the manufacture of airgun hand pumps. Hill hand pumps have a reputation for being extremely durable and outlasting other pumps by many years. Because the hand pump is easy to disassemble, it can be easily serviced by the owner. There’s no other manufacturer that sells replacement parts for their hand pumps. In fact, there’s no hand pump manufacturer that recommends disassembly of their products. Other manufacturers state that disassembly will void your warranty! Your Hill hand pump comes with a lifetime warranty. Maintain it as indicated in the owner’s manual and use Hill replacement parts as needed, and you’ll have a hand pump on which you can depend for decades.

Laser Genetics ND3 Laser, Green, 3-Mile Visibility, Mounting Accessories $311.94 BSA Laser Genetics ND3 laser Green laser with Rotary Optical Collimator Adjustable beam diameter & intensity Micro beam (smallest diameter) is visible up to 3 miles Larger-diameter beams illuminate trails or paint targets up to 250 yds away Water-resistant Nitrogen-filled to prevent fogging 1" tube (can be mounted on a gun) Battery has 7 hrs of continuous use Made of high-tech aluminum Anodized matte black finish 532nm laser 18mW output Class 2M Uses 1 CR123V lithium battery (included) 6.25"x1.25" 5.5 oz. 1-year manufacturer’s warranty Includes 1 CR123A lithium battery, scope mount (fits 1" scope tube up to 56mm objective lens) w/windage & elevation adjustments, 3/8" & Weaver mounts, binocular/spotting scope mount (9.2mm to 6mm long; 1.25mm threads), remote momentary pressure switch, cleaning kit & padded carrying case Rated to take the 2-way recoil of airguns, including the harsh recoil of springers

IZH Drozd BB Gun Fake Suppressor $60.6 Includes suppressor, adapter and knurled thread protector. Want the suppressor look and feel for your Drozd BB gun without the expense, hassle and government oversight? Our .22LR fake suppressor is as close to a real suppressor as you can get without paying the tax stamp. It’s CNC-machined from a solid aluminum rod, given a durable liquid ceramic finish and professionally laser-engraved. Everything is identical to the real ATF-registered suppressors! Since its a fake suppressor, the gun’s report (loudness) is NOT reduced. Many shooters prefer the weight and balance improvement with the added suppressor. In fact, it’ll work on any airgun that has a 1/2"x28 TPI threaded barrel. To ensure exact thread alignment, the threaded adapters are CNC-machined to precision tolerances from a solid steel rod in one lathe operation. They are hot-salt blued to match the gun. The included steel thread protector covers the threads on your barrel when no accessory is mounted. Easy installation in place of the existing barrel nut. No tools or modifications are required.

Laser Genetics ND3 Subzero Laser Designator, 1" Tube, 3 Mounts $359.99 Laser Genetics ND3 Subzero Laser Designator Functions well in temperatures 40-deg. F or colder Green laser with Rotary Optical Collimator* Adjustable beam diameter & intensity Micro-beam is visible up to 3 miles Wider beam illuminates trails or "paints" targets up to 250 yds away Water-resistant Nitrogen-filled to prevent fogging (o-ring sealed) 532nm laser 18mW output Class 2M Uses 1 CR123V lithium battery 1" tube 6.75" long 1.25" dia. lens 5.37 oz. Fully multi-coated lenses Made of high-tech aluminum Anodized matte black finish Includes one CR123A lithium battery, Weaver ring, binocular/spotting scope mount (9.2mm to 6mm long, 1.25mm threads), scope mount, remote momentary pressure switch, cleaning kit, hex wrench, lens cap & padded case *The patented Rotary Optical Collimator uses a system of 9 fully multi-coated lenses that allow full adjustment and control of the beam diameter and intensity to focus light where it’s needed most. Rotating the collimator ring to minimum creates a bright micro-beam green laser light visible up to 3 miles. Rotating the collimator to more open settings provides plenty of illumination to light a trail at night or �paint" a target up to 250 yds. away. Do not stare directly into the laser beam or view directly with optical instruments. Viewing the laser light or a bright reflection may cause eye injury.

Be Sociable, Share!

•