Everything on the roof cleaning

Today, a number of roof cleaning methods have been developed to meet the specific needs owners. However, before using any of the available methods, it is important to know that, by using methods for cleaning the roof and over the life of roof may be affected. By having enough information, owners can easily avoid possible damage to their roofs. Also, you can save money cost of repair and maintenance as well. All good quality roofs have a life expectancy of 30 years.

Three prominent roof forms of cleaning methods;

Pressure Washing:

This option is feasible for specific titles ceilings, barrel and metal. The procedure does not require any chemicals so saves a lot of money too. However, this procedure may take a long time, but considered as very environmentally friendly.

Rinse chlorine bleach solutions:

This cleaning procedure consists of rinsing chlorine solutions. Clean the ceiling faster than the other procedures and making relatively short time to clean their roofs. The method is less vulnerable to wear well. However, during the use of chlorine, you must be careful because it is toxic and can damage plants and some individuals.

Hydroxide sodium-based Clean:

This form of roof cleaning method can be effective in degreasing roofs. However, the procedure can last longer while other methods such as laundry bleach or pressure washed. Sodium can damage your roof so you need to take good care of them.

Use any of the above methods to choose the best option to ensure the cleanliness of the roof.

About the Author

For more information about roof cleaning , Pressure cleaning or to receive a free roof check up contact roofmasterspb company today on (561) 630-7826.

Cleaning & Disassembling an AR-15 Rifle : Cleaning the Barrel of an AR-15 Rifle

Daisy Cleaning Kit, .177" caliber $23.94 Can be used on .177 caliber BB or pellet rifles or pistols. Keeps your rifle or pistol performing well. Great for clearing pellets stuck in the barrel. Includes cleaning rods, Daisy gun oil and cleaning patches. .177" Pellet & BB guns

Stoeger Airguns Cleaning Rope, .177 Cal $17.94 Stoeger Airguns cleaning rope .177 cal Built-in bronze brush No assembly required Washable & reusable Cleans in one quick pass One pull-through does it Lightweight & compact Use this cleaning rope to clean the bore of your favorite airgun. Drop the brass-weighted cord through the barrel and slowly pull it through the bore. Repeat as needed until the bore is clean, although one pass may be enough to completely clean the bore. A bronze brush will not damage an air gun bore.

Stoeger Airguns Cleaning Rope, .22 Cal $17.94 Stoeger Airguns cleaning rope .22 cal Built-in bronze brush No assembly required Washable & reusable Cleans in one quick pass One pull-through does it Lightweight & compact Use this cleaning rope to clean the bore of your favorite airgun. Drop the brass-weighted cord through the barrel and slowly pull it through the bore. Repeat as needed until the bore is clean, although one pass may be enough to completely clean the bore. A bronze brush will not damage an air gun bore.

Mad Bull Gemtech G5 Barrel Extension, Black $75.54 Barrel extension Black For airsoft use

Mad Bull Gemtech Halo Barrel Extension $75.54 Barrel extension For airsoft use

Mad Bull Gemtech Blackside Barrel Extension, Black $47.88 Barrel extension 14mm counterclockwise thread Black The barrel extension fits on the outer barrel of the gun with a 14mm counterclockwise thread. The barrel extension is just for looks and will not actually suppress the sound/noise of your airsoft gun. For airsoft use only.

Umarex Barrel for Beretta CO2 .177 Pistol $23.99 Umarex barrel for beretta CO2 pistol (.177) Part number: 41940031

Air Venturi Ported Muzzlebrake, .579" Barrel Diameter $31.19 Ported muzzlebrake .579" barrel diameter

OTIS Flex Cleaning Kit $35.99 Kit comes complete in a zippered nylon belt or pocket pouch. Kit includes: a 34"-rifle and a 16"-pistol flexible cleaning rods with a connector that enables you to have an extra-long rod, 1/2 oz. bottle of bore cleaner, patches, .177 T-Handle Stud, .177 T-Handle bar, .22 short brush, .177 short brush, and an optical bore light. Introducing the new item that comes in your Flex Cleaning System. The Video Instruction shows you the ins and outs of cleaning your air gun. Plus other Otis Products that are be beneficial to the long term use of your air gun.

Otis Lens Cleaning Kit $11.99 The Otis Lens Cleaning Kit contains everything necessary to preserve the quality and functionality of scopes, rangefinders, laser sighting devices, binoculars, cameras, and eye wear. It includes premium anti-fog lens swabs, an Otis microfiber lens cloth, and a mohair lens brush. These components can easily be added to any of the Otis Cleaning Systems. Dont let the poor accuracy of unclean optics prevent you from achieving the results you deserve! Microfiber lens cloth Anti-fog lens swabs Mohair lens brush 1/2 oz anti-fog lens cleaner in spray bottle Mil-spec lens-cleaning tissue paper

UTG Deluxe Tri-Rail Barrel Mount $11.94 Universal Tri-Rail Barrel Mount Complete with Laser Clamping Feature – Each Rail with 2 Slots.

Leapers Deluxe Shotgun Tri-Rail Barrel Mount $27.54 Shotgun Tri-Rail Barrel Mount Complete with Flashlight Clamping Feature – Each Rail with 5 Slots

RWS .177 Cleaning Pellets, 100ct $9.54 .177 caliber cleaning pellets Removes dirt, debris & lead build-up Ideal for any type of pellet gun WARNING! Cleaning pellets are too light to be shot through spring guns. To use a cleaning pellet in a spring gun, use a rod to push it through.

Mad Bull Whisper .45ACP Fake Barrel Extension, Black $34.74 Fake barrel extension Counterclockwise thread Black The fake barrel extension attaches the the outer barrel with a counterclockwise thread and extends your gun’s inner barrel. Pick one up for your next skirmish! For airsoft use only.

Walther CP88 barrel 4" to 6" Blued $67.19 An interchangeable barrel sysem from 4" to 6". Barrel assembly for the CP 88 blued models. Increase your speed and accuracy with this accessory.

JB Unicorn Barrel Extension, Fits AR AEG Rifles, 9.5" $57.54 Barrel extension 14mm counter clockwise thread 9.5" This 9.5" long profile barrel extension by JBU fits all airsoft rifles with 14mm counterclockwise thread. The barrel extension can be used with standard M4 length outer barrels. For airsoft use only.

Mad Bull Gemtech Outback II Fake Silencer & Barrel Extension Tube $34.74 Fake silencer & barrel extension tube 14mm counterclockwise thread For airsoft use The fake silencer & barrel extension tube attaches to the outer barrel of your airsoft gun with a 14mm counterclockwise thread. For airsoft use only. ATTENTION: The fake silencer is just for looks and will not decrease the sound of your airsoft gun.

JB Unicorn 6.01mm Barrel – Mod4 Series, 363mm, 14.29in $45.54 6.01mm x 363mm, 14.29inches tight bore inner barrel, hard anodized aluminum construction. Fits Mod4 AEGs.

Walther CP88 barrel 4" to 6" Nickel $71.99 6" nickel plated barrel assembly for the CP 88 nickel plated models. Increase your speed and accuracy with this accessory.

Gamo .177 Caliber Cleaning Kit $15.54 Three piece rod disassembles for easy storage. All components are expressly designed to eliminate the possibility of damage to the relatively shallow rifling of airguns. Always make sure your airgun is unloaded before cleaning or oiling. Great basic and compact maintenance kit for use on .177 caliber pellet rifles or pistols

Beeman Quick Cleaning Pellets .177 Cal, 100ct $7.14 .177 caliber cleaning pellets Removes dirt, debris & lead build-up Ideal for any type of pellet gun WARNING! Cleaning pellets are too light to be shot through spring guns. To use a cleaning pellet in a spring gun, use a rod to push it through.

Beeman Quick Cleaning Pellets .20 Cal, 80ct $7.14 .20 caliber cleaning pellets Removes dirt, debris & lead build-up Ideal for any type of pellet gun WARNING! Cleaning pellets are too light to be shot through spring guns. To use a cleaning pellet in a spring gun, use a rod to push it through.

Beeman Quick Cleaning Pellets .22 Cal, 80ct $7.14 .22 caliber cleaning pellets Removes dirt, debris & lead build-up Ideal for any type of pellet gun WARNING! Cleaning pellets are too light to be shot through spring guns. To use a cleaning pellet in a spring gun, use a rod to push it through.

RWS .22 Quick Cleaning Pellets, 100ct $11.94 .22 caliber cleaning pellets Removes dirt, debris & lead build-up Ideal for any type of pellet gun WARNING! Cleaning pellets are too light to be shot through spring guns. To use a cleaning pellet in a spring gun, use a rod to push it through.

Beeman Quick Cleaning Pellets .25 Cal, 80ct $7.14 .25 caliber cleaning pellets Removes dirt, debris & lead build-up Ideal for any type of pellet gun WARNING! Cleaning pellets are too light to be shot through spring guns. To use a cleaning pellet in a spring gun, use a rod to push it through.

Gamo .177 Air Gun Cleaning Kit $23.99 Air rifle yoke (stand) Gamo airgun oil 25 felt cleaning pellets 25 cleaning patches 2-piece cleaning rod 1 patch loop 1 nylon brush Rod handle Protective cover The Gamo cleaning kit contains everything you need to clean and maintain your spring-piston air rifle or air pistol. The portable gun stand is light and easy to assemble. Take it from the shop to the range. Made of durable, easy-to-clean material. Sturdy enough to hold any adult airgun.

AirForce 12" Barrel, .25 Cal, Lothar Walther $145.2 12" choked Lothar Walther Barrel .25 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will decrease when attached to the Talon & Condor Extremely accurate!

AirForce 18" Barrel, .177 Cal, Lothar Walther $193.5 18" choked Lothar Walther Barrel .177 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon SS and decrease when attached to the Condor Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 18" Barrel, .20 Cal, Lothar Walther $193.5 18" choked Lothar Walther Barrel .20 caliber Fits AirForce Talon, Talon SS & Condor rifles Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon SS and decrease when attached to the Condor Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 18" Barrel, .22 Cal, Lothar Walther $193.5 18" choked Lothar Walther Barrel .22 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon SS and decrease when attached to the Condor Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 18" Barrel, .25 Cal, Lothar Walther $193.5 18" choked Lothar Walther Barrel .25 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon SS and decrease when attached to the Condor Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 24" Barrel, .177 Cal, Lothar Walther $229.8 24" choked Lothar Walther Barrel .177 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon or Talon SS Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 24" Barrel, .20 Cal, Lothar Walther $229.8 24" choked Lothar Walther Barrel .20 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon or Talon SS Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 24" Barrel, .22 Cal, Lothar Walther $229.8 24" choked Lothar Walther Barrel .22 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon or Talon SS Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 24" Barrel, .25 Cal, Lothar Walther $229.8 24" choked Lothar Walther Barrel .25 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon or Talon SS Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

Smith & Wesson 6" Barrel, .177 Cal., Matte Black, Fits S&W 586 CO2 Revolver $67.19 S&W 6" barrel .177 caliber Matte black shroud Fits Umarex-made Smith & Wesson 586 CO2 revolvers Increases velocity over the 4" barrel Easy to install No machining involved Includes shroud, barrel & screw Does not fit S&W firearms or airsoft guns If you’ve got an Umarex S&W 586 CO2 revolver with a 4" or 8" barrel, then this 6" one will make your collection complete. The longer the barrel on a CO2 gun, the greater the velocity.

S-Thunder BB Shower, Standard Barrel, Blue $71.99 BB shower shell For use with 40mm S-Thunder grenade launchers Compatible with all gas types Holds 80 BBs, 7 x 11mm paintballs or 4 x 17mm paintballs 20-30m effective range Standard barrel Blue 1.57" diameter 4.33" long 0.52 lbs This S-Thunder BB shower shell can be fired using any 40mm S-Thunder grenade launcher or be detonated by hand. You can fill this shell with paintballs, powder balls or BB pellets and operate it with any type of gas ranging from CO2 to green gas. This shower shell gives off a loud and satisfying 78-110dB explosion when triggered.

AirForce 12" Barrel, .177 Cal, Lothar Walther $145.2 12" choked Lothar Walther Barrel .177 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will decrease when attached to the Talon & Condor Extremely accurate! Can be used with the AirForce end cap (not included) on the Condor, which strips away turbulent air for a quieter report

AirForce 12" Barrel, .20 Cal, Lothar Walther $145.2 12" choked Lothar Walther Barrel .20 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will decrease when attached to the Talon & Condor Extremely accurate! Can be used on the Condor with the AirForce end cap (not included), which strips away turbulent air for a quieter report

AirForce 12" Barrel, .22 Cal, Lothar Walther $145.2 12" choked Lothar Walther Barrel .22 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will decrease when attached to the Talon & Condor Extremely accurate! Can be used on the Condor with the AirForce end cap (not included), which strips away turbulent air for a quieter report

Smith & Wesson 586, 4-inch Barrel $275.99 10-shot Repeater, Double-/Single-Action

Smith & Wesson 586, 6-inch Barrel $295.14 10 Shots, Double-/Single-Action

939 UHC Revolver, 2.5 Barrel $32.34 Spring powered. Replica shells hold BBs.

UTG Low-Profile Dragon Claw Clamp-on Barrel Bipod $25.8 High Tech Durable Aluminum Construction Clever Adjustment Wheel for Wide Range of Barrel Sizes – 11mm to 19mm User Friendly Clamp-On Features Unique Posi-Lock Feature to Prevent Tipping Foldable with Fully Adjustable Center Height From 9" to 11"

Hoppe’s Air Rifle & Air Pistol Cleaning Kit, .17 Caliber $11.94 Hoppe’s airgun cleaning kit 3-piece steel rod with looped handle 2.25-oz. Hoppe’s 9 lubricating oil Brass jag .17-cal brass brush* Cleaning patches Gun care guide *The brush is .17 caliber. It will still work on your .177-caliber airguns. While airguns don’t require constant cleaning like firearms, there are times when they need to be cleaned to achieve maximum accuracy. Hoppe’s has a reputation for making high-quality gun oil and cleaning accessories.

Brownells 7/8" Round Cleaning Patch, .177-.25 Cal, 100ct $3.59 Brownells cleaning patches 100% cotton flannel 7/8" round Fits .177-.25 cal. bores 100ct

JBU Fake Airsoft Suppressor, 6.75", Aluminum, Incl. Barrel Extension $71.99 JBU (MSS) modular supressor system Aluminum alloy material 14mm counterclockwise thread 5-pc set Unique JBU serial number 6.75"x1.5" This high-quality modular suppressor system by JBU will enhance the look of your airsoft gun. The modular suppressor system is made of aluminum alloy material for extra durability. The 5-piece set includes a barrel cap, forward extender, base extender, flash hider & adapter. Does not suppress the sound/noise of your gun. For airsoft use only.

Dewey .177-.20 Cal Cleaning Jag, 5/40 Male Threads, Brass $4.8 .177 & .20 cal. brass cleaning jag 5/40 male threads Over-use can damage some bores! Do not use on brass bores

Gamo Cleaning Mat, 12"x 53" $11.94 Gamo cleaning mat Place under your gun and any cleaning supplies to protect furniture Pebble-grain texture prevents slipping and sliding 12"x53" Plan ahead when you clean or maintain your airguns! Lay down this mat first and then pull out your air gun, parts, oils, solvents, cleaning tools and anything else that you need. Just because it’s real long, doesn’t mean you can’t use it for air pistols, too!

Walther CP88, Nickel, 6 inch barrel $251.94 Black grips & compensator

Walther CP88, Nickel, 4 inch barrel $239.99 Black grips

HFC HG-132 4 Barrel Gas Revolver, Black $53.94 Adjustable Rear Sight, Semi-Auto

HFC HG-132 4 Barrel Gas Revolver, Silver $53.94 Adjustable Rear Sight, Semi-Auto

HFC HG-133 6 Barrel Gas Revolver, Black $53.94 Adjustable Rear Sight

HFC HG-133 6 Barrel Gas Revolver, Silver $53.94 Adjustable Rear Sight

Walther CP88, Blued, 6 inch barrel $227.94 Black grips & compensator

939 UHC 2.5 inch barrel revolver, Silver $32.34 Spring powered. Replica shells hold BBs.

Gamo Shadow Sport $215.99 Bull barrel. Scope Included

Beeman Carnivore Air Rifle, RS2 Trigger $251.99 3-9×32 Scope, Fluted Barrel

Beeman Elkhorn Air Rifle, RS2 Trigger $251.99 3-9x32AO Scope, Fluted Barrel

Diana RWS 34P Pro Compact $321.3 Shorter barrel = easier handling

Diana RWS 350 Feuerkraft Pro Compact $515.4 Shorter barrel = easier handling!

Benjamin Marauder PCP Air Pistol $467.99 8-rd Repeater, Shrouded Barrel

Tech Force Spring Gun Cleaning Kit with Seals, Mainspring, Oil + More $11.46 Tech Force cleaning kit Suitable for various Tech Force spring-piston airguns 6 leather seals: fit TF S2-1, TF24, FT15, TF39 & TF49 1 mainspring: fits TF15, TF39 & TF49 1 safety: fits TF15, TF39 & TF49 Also includes oil* in a spout-top squeeze bottle, segmented cleaning rod, nylon brush & cloth mop *The oil is not chamber lube. It’s a petroleum-based oil for wiping down the exterior of your gun to remove fingerprints and leave a protective coating on wood and metal surfaces.

RWS Lock Down 1-Pc Mount w/1" Rings, 11mm Dovetail, Barrel Droop Compensation $33.54 1" rings Fits 11mm dovetail 2 hex screws per ring 4 hex screws secure base to scope rail 2 recoil stop pins .025" elevation compensates for barrel droop Made of aircraft-grade aluminum Includes hex wrench Black matte

RWS Lock Down 1-Pc Mount w/30mm Rings, 11mm Dovetail, Barrel Droop Compensation $33.54 30mm rings Fits 11mm dovetail 2 hex screws per ring 4 hex screws secure base to scope rail 2 recoil stop pins .025" elevation compensates for barrel droop Made of aircraft-grade aluminum Includes hex wrench Black matte

J-B Non-Embedding Bore Cleaning Compound $14.1 Paste cleaner gets bores sparkling clean without caustic liquids. Removes lead residue in just three passes from steel barrels. Do not use in brass barrels. Cushioned abrasive action actually polishes your bore clean without damage. Used and trusted by precision shooters for over 40 years to clean their finest rifle bores. 2 oz. jar. Ideal for steel airgun and firearm barrels.

Gamo Treated Gun Cleaning Cloth, 10"x10" $5.94 Gamo treated gun cleaning cloth Cleans & lubricates metal surfaces Safe for airguns, airsoft guns and firearms Removes fingerprints, which have acid that can eat through the metal’s bluing…leading to rust and pitting 10"x10" If you don’t wipe down the metal parts of your gun after each handling or shooting session, you may notice some rust on the metal. The fingerprints you leave on the metal surface of a gun has enough acid that it will eventually eat through the bluing of your gun. Once the protective bluing is gone, rust takes a foothold. Using a treated cloth to wipe down your gun before putting it away will preserve the finish and your investment.

CenterPoint Laser Boresighter, .17 to .50 Cal Guns, Min. 3.8" Barrel Needed $42.3 CenterPoint red laser boresighter Fits .17 to .50 caliber guns Also compatible with 12-, 16- and 20-gauge shotguns Works with air rifles & air pistols with minimum 3.8-inch barrel 6 adapters 6.5"x0.5"x0.5" Includes batteries Do not use on guns that have muzzlebrakes, silencers, fake silencers, shrouds or noise dampeners. CenterPoint’s red laser boresighter is battery-powered and has 6 adapter fittings for .17 to .50 caliber gun (air rifles, air pistols, firearms & airsoft guns). It also fits 12-, 16- and 20-gauge shotguns. Stop wasting time and ammo manually sighting-in your targets!

Gamo Shadow Sport with Nitro Piston $347.98 Bull Barrel, 3-9×40 Scope & Mount

Gamo Varmint Hunter Stalker Air Rifle $251.99 Dampener, Bull Barrel, Scope, Laser

Gamo Varmint Hunter with Nitro Piston $299.99 Gas Spring Rifle with Bull Barrel

Hammerli Nova $359.99 Fixed Barrel and Spring Lock Loading

Umarex Elite Force 1911A1 CO2 Airsoft Pistol $119.94 Full Metal , Blowback , Threaded Barrel

Crosman Recon Airsoft Kit, Brown/Black $71.99 Short-barrel gun with a pistol grip

Socom Gear Gemtech Oasis Gas Airsoft Pistol $96 Non-Blowback, Extended Outer Barrel

Tactical Force Combat CO2 Blowback pistol $71.94 Metal slide & barrel, Double Action

Tactical Force Combat CO2 pistol, LE Blue $71.94 Metal slide & barrel, Double Action

Falcon Airguns Prairie Falcon Profile Rifle $1151.99 Shrouded Bull Barrel, 8-rd Clip

Falcon Airguns Prairie Falcon Sporter Rifle $1031.99 Shrouded Bull Barrel, 8-rd Clip

Echo 1 MTC 1 AEG Airsoft Rifle, Black $251.99 Modular tactical carbine, short barrel

Crosman Stinger S32P Pump Airsoft Shotgun $35.94 Short-barrel gun with a pistol grip

JBU Tight Bore 6.03mm Barrel – AK Series, 455mm, 17.9in $33.54 Hard Anodized, aluminum construction. Should increase FPS by 10-20 without additional modifications.

JB Unicorn 6.01mm Barrel – AK Series, 455mm, 17.9in $45.54 Hard Anodized, aluminum construction. Compatible with AK series

JB Unicorn 6.03mm Barrel – Mod16A3 Series, 509mm, 20.0in $33.54 Hard Anodized, aluminum construction. Should increase FPS by 10-20 without additional modifications.

JB Unicorn Tight Bore 6.03mm Barrel – Mod4 Series, 363mm, 14.29in $35.94 Hard Anodized, aluminum construction. Should increase FPS by 10-20 without additional modifications.

S-Thunder Pistol Grip Long Barrel Grenade Launcher $71.94 For M203 / 40mm Gas Powered Grenades

WE P08 Metal Gas 6 inch barrel airsoft pistol $119.94 Full metal gas blowback pistol

Walther CP88, Nickel, 6 inch barrel, CO2 Pistol $347.4 Wood grips & compensator

Walther CP88, Blued, 4 inch barrel, CO2 Pistol $287.99 Wood grips

Walther CP88, Blued, 4 inch barrel, CO2 pistol $211.19 Black grips

Walther CP88, Blued, 6 inch Barrel, CO2 Pistol $323.99 Wood grips & compensator

WE P08 Metal Gas 4 inch barrel, Silver $155.94 Full metal gas blowback pistol

Walther CP88, Nickel, 4 inch barrel, CO2 Pistol $323.99 Wood grips

WE P08 Metal Gas 4 inch barrel airsoft pistol $113.94 Full metal gas blowback pistol

UHC 939 2.5 inch barrel revolver, Silver/Black $32.34 Spring-powered. Replica shells hold BBs.

Smith & Wesson Interchangeable Barrel System for the 686, 6", Nickel $80.64 With the purchase of additional barrels for your S & W 686 you can improve your accuracy and projectile speed with the longer barrels, and have the flexibility of changing to accommodate a shorter shooting distance.

MTM Case-Gard Predator Shooting Table $89.94 Predator shooting table For right- & left-handed shooters Wedge-shaped table with molded barrel grooves to stand long guns on their butts Doubles as a maintenance/cleaning bench 30" tall Weighs less than 15 lbs MADE IN USA This just might be the perfect shooting table. It’s lightweight, especially when compared to benchrest tables. It’s collapsible and stores flat, sturdy, durable and can be used indoors or out. Use this with your firearms, air guns and airsoft guns.

Gamo Varmint Hunter $179.99 Scope & torch light w/ Bull Barrel

Gamo Varmint Stalker Air Rifle $235.19 Noise Dampener, Bull Barrel, 4×32 Scope

Gamo Varmint Stalker Deluxe Air Rifle $239.99 Noise Dampener, Bull Barrel, 4×32 Scope

Multi-Shot Combat Commando Shotgun $65.94 3 BBs Each Shot, Triple Barrel System

Multi-Shot Combat Tactical Shotgun $71.99 3 BBs Each Shot, Triple Barrel System

SIG Sauer P226 X5 Sport IPSC CO2 Full-Metal Pistol $119.99 Airsoft GBB, X-mount & Barrel Extension

ECHO 1 Long M203 Airsoft Grenade Launcher, M4/M16 Series $119.99 Echo 1 grenade launcher 3 mounting systems: R.I.S., monobloc & barrel for standard M4 Marui-type Metal barrel, barrel track, release lever, trigger, safety, triggerguard & barrel attachment rings

Air Venturi Flash Suppressor, Fits AirForce Bounty Hunter Air Rifles, 1/2"x28tpi $23.94 Flash suppressor Fits AirForce Bounty Hunter air rifles 1/2"x28tpi (internal threads) AirForce Bounty Hunter air rifles come with our custom flash hiders. When we sell a Bounty Hunter rifle, we have to thread the barrel to fit the flash hider. If you already have a threaded barrel on your Bounty Hunter and need a different or spare flash hider, this will fit. If you’re ordering a Condor, Talon or Talon SS (or an extra AirForce barrel) at the same time and want us to thread the outside of your barrel (for a minimal fee), then click the "Add Service" button.

Swiss Arms Bipod, Includes 3 Mounts $45.54 Swiss Arms bipod Aluminum Folding, telescoping legs Includes 3 mounts: Weaver/Picatinny, barrel clamp & sling swivel stud

Beretta Laser, Fits 92FS Pellet Pistol $31.19 Laser Fits Beretta 92FS pellet pistol Clamps under the barrel Screw mount On/off LED indicators Increase the accuracy of your Beretta 92FS CO2 pellet pistol with this laser. It slides on under the barrel and holds with clamping pressure (screws tighten the mount). Not suitable for the Beretta Elite II air pistol or any handgun that has an accessory rail under the barrel.

Air Arms MPR Muzzle Weight, 2.7 oz. $17.42 MPR muzzle weight 2.7 oz. Slips onto muzzlebrake (tem#:AA-JT459) and attaches with a setscrew (screw not include) Does not fit on barrel–only on optional muzzlebrake (sold separately)

AirForce Striker Weight $11.94 If you want to convert an AirForce Airguns Talon or Talon SS air rifle to a Condor air rifle, you’ll need this striker weight, a Hi-Flo tank and a 24" barrel.

Daisy Precision Max .177 Cal, 7.5 Grains, Flat-Nosed, 250ct $2.99 .177 caliber 7.5 grains Flat-nosed (wadcutter) pellets Graphite coating reduces barrel leading Ideal for low- to medium-power guns 250 pellets in flip-top container

Gamo Gun Buddy Rifle Sling, Fits All Air Rifles $15.59 Perfect for any air rifle Lightweight and durable Quick adjustment fasteners Non-slip pebbling Deluxe, shock-absorbing shoulder strap No sling swivels required! Front slips over barrel, back slips over buttpad

Umarex Compensator, Fits Hammerli 850, Walther 1250 Dominator & Beretta CX4 Rifles $47.99 Rifle compensator Fits RWS 850 AirMagnum, Walther 1250 Dominator (do not use on .25 cal gun) and Beretta CX4 Storm Friction fit Set screw secures compensator to barrel

Crosman 459MT 2-Pc Intermount, 3/8" Dovetail $12.54 Attaches to the barrel & provides a 3/8" dovetail Fits Crosman models 2240, 2250, 2260, 2289, 1322, 1377, 1740 & 1760 Includes 1 set, which is 2 intermounts

JBU Fake Airsoft Suppressor, 4.75" Long, Aluminum, Orange Tip $41.99 Fake airsoft supressor Aluminum alloy material 14mm counterclockwise thread JBU laser marking 4.75" long Extend the outer barrel of your airsoft gun with this fake supressor by JBU. The fake airsoft supressor has 14mm counterclockwise threads and easily attaches to the outer barrel of your gun for a unique look in the battlefield!

BKL 1-Pc Adjustable Scope Mount, 1" Rings, 3/8" Dovetail, Black $79.8 1-pc scope mount 3/8" dovetail Low profile 1" rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8" side rails for mounting other accessories 2.5" of clamping length 4" overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz. 6 base screws Matte black Includes 3 hex wrenches Got barrel droop? This new mount will help you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails offer more space to add a laser and a flashlight to augment a scope.

BKL 1-Pc Adjustable Scope Mount, 30mm Rings, 3/8" Dovetail, Black $79.8 1-pc scope mount 3/8" dovetail Low profile 30mm rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8" side rails for mounting other accessories 2.5" of clamping length 4" overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz. 6 base screws Matte black Includes 3 hex wrenches Got barrel droop? This BKL Tech mount lets you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails give you room to mount a laser and flashlight.

Laserlyte Mini Laser Bore Sight, Fits .17 to .22 Cal Guns $71.99 Laserlyte laser bore sight Fits .17 to .22 caliber guns (air rifles, air pistols and firearms) Requires minimum 3" barrel (the owner’s manual incorrectly states that you need a min. 4" barrel) 6061 T6 aluminum 650nm laser module Class IIIA laser 5mw power output Includes three 393 batteries 500-yd range at night 1.5 hrs battery life (constant on) Do not use on guns that have muzzlebrakes, silencers, fake silencers, shrouds or noise dampeners. Stop wasting time and ammo manually sighting-in targets. A Laserlyte mini laser bore sight will get your shots within 3 to 4 inches of the bullseye within a couple shots at 100 yards. Air rifles, air pistols and rimfires with at least a 3-inch barrel can use the Laserlyte mini laser bore sight. The batteries come installed in the bore sight.

Brownells 1-3/8" Square Patches, Heavy-Duty Cotton Flannel, 100-ct $3 Brownells bore cleaning patches 100% heavy-duty cotton flannel 1-3/8" square 100/pack

H&N Field Target Trophy Power Copper Plated, .22 Cal, 15.12 Grains, Round Nose, 200ct $10.2 .22 caliber 15.12 grains Round nose Copper-coated lead 200 pellets Field Target Trophy Power pellets have a copper coating that helps prevent lead build-up in your airgun’s barrel. H&N Sport pellets are known for their consistency and accuracy. Use these for hunting and plinking.

ECHO 1 Short M203 Airsoft Grenade Launcher, Mod4/Mod16 Series $117.54 Echo1 2 in 1 M203 Launcher Kit RIS Mount Included: Mounts onto all 20mm RIS (Quick Detach) Barrel Mount Included: Mounts on most Mod4 / Mod16 series AEG Barrels Full metal Frame and Tube Reinforced Trigger / pin assembly for enhanced durability

UTG Zytel Clamp-on Bipod $9.54 One Year Warranty Made of durable Zytel. Extremely light weight – only 6oz. Clamps around barrel and fits most guns. Folds to be carried in your pocket or bag. Very sturdy and affordable. Best valued economic solution for your practical need. Use on airsoft guns, airguns & firearms.

UTG Special Operations Universal Tactical Black Leg Holster $17.94 Fully adjustable and removable belt hanger. Deluxe non-slip holster pad, and non-slip, fully adjustable and removable leg strap For maximum comfort and provide additional retention for your handgun during extreme operations, rappelling, swimming and jumping. Extra mag pouch. Thumb break security. Universal design – For most medium to large frame pistols. Adjustable closure – For a tight pistol barrel fit. Dimensions: Length: 7 inches Width: 3.5 inches – 2 inches For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a length that is greater than or equal to the length of the holster.

UTG Special Operations Universal Tactical Black Leg Holster, Left Handed $17.94 Fully adjustable and removable belt hanger. Deluxe non-slip holster pad, and non-slip, fully adjustable and removable leg strap – for maximum comfort and provide additional retention for your handgun during extreme operations, rappelling, swimming and jumping. Extra mag pouch. Thumb break security. Universal design – for most medium to large frame pistols. Adjustable closure – for a tight pistol barrel fit. Dimensions: Length: 7" Width: 3.5" – 2" For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a length that is greater than or equal to the length of the holster.

IZH Drozd BB Gun Fake Suppressor $60.6 Includes suppressor, adapter and knurled thread protector. Want the suppressor look and feel for your Drozd BB gun without the expense, hassle and government oversight? Our .22LR fake suppressor is as close to a real suppressor as you can get without paying the tax stamp. It’s CNC-machined from a solid aluminum rod, given a durable liquid ceramic finish and professionally laser-engraved. Everything is identical to the real ATF-registered suppressors! Since its a fake suppressor, the gun’s report (loudness) is NOT reduced. Many shooters prefer the weight and balance improvement with the added suppressor. In fact, it’ll work on any airgun that has a 1/2"x28 TPI threaded barrel. To ensure exact thread alignment, the threaded adapters are CNC-machined to precision tolerances from a solid steel rod in one lathe operation. They are hot-salt blued to match the gun. The included steel thread protector covers the threads on your barrel when no accessory is mounted. Easy installation in place of the existing barrel nut. No tools or modifications are required.

MTM Case-Gard Gun Vise $45.54 Gun vise Clamps down fast with a single adjustment Secure, non-marring hold High- & low-positioned forks for optimum cleaning position 14 compartments for cleaning tools and more Slide-out tray with additional compartments 11-position holder for screwdriver bits also holds jags, brushes & more Cleaning rod storage slots Rugged chemical- & solvent-resistant polypropylene MADE IN USA Whether you work on firearms, air rifles or both, the MTM gun vise can handle it. There’s plenty of room to hold your cleaning gear, oils, tools and more without having things roll of a table or get lost under piles of extraneous items. Stay organized and focused when cleaning and maintaining your air guns.

Welman 11mm-to-Picatinny Drooper Rail, 22 MOA, Fits Air Arms S410/S510 Air Rifles $91.8 11mm-to-Picatinny (MIL-STD-1913) adapter Compensates for barrel droop 22 MOA @ 100 meters Fits Air Arms S410/S510 air rifles Hard-anodized aircraft-grade aluminum Secures to your air rifle’s 11mm rail with screws A hole in the mount allows access to the magazine assembly for any needed adjustments 105 grams (3.68 oz.) Any gun can have barrel droop. This 11mm-to-Picatinny (MIL-STD-1913) adapter fits Air Arms S410 and S510 air rifles and compensates for 22 MOA of droop at 100 meters. The adapter was designed for people who shoot at longer distances. Does not fit S400 or S500 air rifles because the cutout for the loading port requires a different relief.

IZH Drozd Adapter, 1/2"x28TPI, Thread Protector $30.58 The Drozd is one of the most exciting BB guns to hit the market in a long time! If you’re lucky enough to have one and want to mount an accessory that is threaded 1/2"x28TPI, such as our unrestricted fake suppressor, then this is the part you need. To ensure exact thread alignment, the threaded adapters are CNC-machined to precision tolerances from a solid steel rod in one lathe operation. They are hot salt blued to match the gun. The included steel thread protector covers the threads on your barrel when no accessory is mounted. Easy installation in place of the existing barrel nut. No tools or modifications are required. Adapter assembly includes one adapter and one knurled thread protector. This is the way the gun should have come from the manufacturer! Give your Drozd a tactical look… order a threaded adapter today!

Welman 11mm-to-Picatinny Drooper Rail, 16 MOA, Fits Air Arms S410/S510 Air Rifles $91.8 11mm-to-Picatinny (MIL-STD-1913) adapter Compensates for barrel droop 16 MOA @ 50 meters Fits Air Arms S410/S510 air rifles Hard-anodized aircraft-grade aluminum Secures to your air rifle’s 11mm rail with screws A hole in the mount allows access to the magazine assembly for any needed adjustments 105 grams (3.68 oz.) Any gun can have barrel droop. This 11mm-to-Picatinny (MIL-STD-1913) adapter fits Air Arms S410 and S510 air rifles and compensates for 16 MOA of droop at 50 meters. The mount was designed for the distances usually used by field target shooters…but it’ll work for any purpose you decided to use your air rifle. Does not fit S400 or S500 air rifles because the cutout for the loading port requires a different relief.

ICS M203 Grenade Launcher with 40mm Grenade $173.94 New ICS M203 RIS mount grenade launcher. It is designed to fit on a standard 20mm picticany rail and comes standard with a metal frame that will insure a secure hold on your airsoft gun. Includes one airsoft grenade cartridge. M203 Grenade Launcher Length: 382 mm Length of barrel: 305mm Weight: 775g Diameter: 40mm 40 mm Grenade Length: 102 mm Capacity: 72 rds of 6mm BBs

Gamo Raptor .22 Cal, 9.8 Grains, PBA, Round Nose, 50ct $11.58 PBA ammo can damage and even penetrate many metal airgun traps & targets. If you must use metal traps or targets, use our Heavy-Duty Metal Trap, the A.G.E. Quiet Pellet Trap, or traps & targets designated for rimfire guns. .22 caliber 9.8 grains Round nose 50 pellets True Gold 18 Karat gold plating eliminates barrel corrosion and enhances accuracy shot after shot.

Colt M203 Grenade launcher Model 4 Series $131.99 Colt M203 grenade launcher Each reusable gas grenade holds 18 BBs Launches 18 BBs at once Quick-launcher loading system Includes 3 mounts (R.I.S., monobloc & barrel for standard M4 Marui-type) Can be mounted on many M4 models Includes one 18-BB grenade 15" long, 3.01 lbs. Full metal

Crosman B272 4-Pc Intermount, 3/8" Dovetail $17.94 Attaches to the barrel & provides a 3/8" dovetail Includes 1 set, which is 2 bases (each base has 2 sides that are screwed together) Black matte finish Fits current production Benjamin & Sheridan airguns Mounts so far forward that you’ll have to use a pistol scope to get the right eye relief. Do not grab any part of the scope when pumping your gun!

Gamo Raptor PBA .177 Cal, 5.4 Grains, Round Nose, 100ct $10.79 PBA ammo can damage and even penetrate many metal airgun traps & targets. If you must use metal traps or targets, use our Heavy-Duty Metal Trap, the A.G.E. Quiet Pellet Trap, or traps & targets designated for rimfire guns. .177 caliber 5.4 grains Round nose 100 pellets True Gold 18 Karat gold plating eliminates barrel corrosion and enhances accuracy shot after shot.

Winchester 4×32 Rifle Scope, Rings $35.99 4x rifle scope is a fantastic choice for general field use. Tough construction is fogproof and shock resistant. Includes 1 ", see-thru rings that will fit most air rifles equipped with 3/8" or 11mm dovetails. Fully-adjustable for windage and elevation; includes removable lens covers. Can be used with break barrel, pneumatic, BB or CO2 powered air rifles. 1 " diameter tube. Shockproof and fogproof are both there!

Gamo Raptor PBA .25 Cal, 14.4 Grains, Round Nose, 50ct $9.59 PBA ammo can damage and even penetrate many metal airgun traps & targets. If you must use metal traps or targets, use our Heavy-Duty Metal Trap, the A.G.E. Quiet Pellet Trap, or traps & targets designated for rimfire guns. .25 caliber 14.4 grains Round nose 50 pellets True Gold 18 Karat gold plating eliminates barrel corrosion and enhances accuracy shot after shot.

LaserLyte Laser Bore Sighter, .22 – .50 caliber $71.99 By projecting a laser from the center of the axis of the barrel of your airgun or firearm, the LaserLyte Laser Bore Sighter allows you to instantly and accurately set your sights or scope. The easy-to-use system will fit all .22 – .50 caliber rifles and pistols. Scope and sight alignment have never been easier or more accurate! No more wasted time! No more wasted ammo! Do not use on guns that have muzzlebrakes, silencers, fake silencers, shrouds or noise dampeners.

JBU Fake Airsoft Suppressor, 4.75", Aluminum $35.99 Fake supressor Aluminum alloy material 14mm counterclockwise thread JBU laser marking 4.75" long This fake suppressor by JBU fits the outer barrel on most airsoft guns with a 14mm counterclockwise thread. The fake suppressor is for looks only and will not actually decrease the sound of your airsoft gun. The fake suppressor features JBU laser markings and has a lightweight matte finish. For airsoft use only.

JBU Fake Airsoft Suppressor, 8.25", Aluminum $47.99 Fake supressor Aluminum alloy material 14mm counterclockwise thread JBU laser marking 8.25" long Enhance the look of your favorite airsoft gun with this high-quality fake suppressor by JBU! This 8.25" fake suppressor fits on the outer barrel of airsoft guns with a 14mm counterclockwise thread. The fake suppressor is made of durable aluminum alloy and has a matte finish. This fake suppressor does NOT decrease the sound of your airsoft gun. For airsoft use only.

RWS Rifle Shooter’s Kit, .177 Caliber $43.19 Kit provides everything needed to shoot and maintain your RWS .177 airgun: Jointed Cleaning Rod, Chamber Lube, Spring Cylinder Oil, Oiling Needle, .177 Jag, .177 Bore Brush, 1 tin each/250 Meisterkugeln & Superdome Pellets, 25- .177 cleaning pellets and four 10 meter – 4" x 4" targets.

RWS Rifle Shooter’s Kit, .22 Caliber $43.19 The RWS Shooter’s Kit contains everything you need to maintain your .22 caliber air rifle. Includes: 3-piece cleaning rod .22 caliber jag .22 caliber brush 1/2-oz RWS chamber lube 1-oz RWS spring cylinder oil 10-meter distance targets (10 targets) RWS Superdome pellets (500-count) .22 caliber cleaning pellets (25-count) 3" needle to apply lubricant

G&G Armament 30mm AP Red Dot Sight, 1-Pc Weaver/Picatinny Mount $71.99 AP red dot sight 1-pc Weaver/Picatinny mount 30mm Incl. flip-open lens caps, 2 batteries & cleaning cloth Improve the accuracy of your firearm, airgun or airsoft gun with this G&G Armament AP red dot sight. The red dot sight comes with a one piece mount that attaches to your gun’s tactical rail and includes flip-open lens caps, cleaning cloth & 2 batteries.

Crosman Nitro Lubricating Oil for All Airsoft Guns, 57ml $5.63 Crosman Nitro Lubricating Oil reduces friction and prevents airsoft guns from jamming in the battlefield. This high grade silicone oil comes in a compact spray bottle container for easy application during intense skirmish situations. Maintain the reliability of your airsoft gun and order today! 57ml (1.93 fl oz) May increase or decrease muzzle velocity (varies by model) Can be used on new guns, but they may shoot slower for the first 100 Rds after use AEG & spring guns should be lubricated every 3,000 to 6,000 shots Gas guns should be lubricated every 1,000 to 3,000 shots Not recommended for use on o-ring and other plastic components We can not ship Crosman Nitro Lubricating Oil using air services. Please consider this when you choose a shipping method. Instructions: Remove magazine Spray a short burst down the barrel & through the feed tube in the magazine well Remove excess oil & wipe barrel with a swab

UTG Drooper Scope Rail, 11mm-to-Weaver Adapter, Compensates for Droop & Stops Scope Shift $22.74 UTG DNT06 scope mount base Attaches to rifle’s 11mm scope rail Fits any rifle with an 11mm scope base…either dovetail grooves or a raised rail Decreases barrel droop with 10" upward compensation at 30 yds Stops scope shift–forever! Scope base provides a secure foundation for Weaver/Picatinny mounts 4 hex screws firmly attach base to your Diana rifle Dual scope-stop holes to stop movement 0.68" saddle height 0.78" total height 1" wide 4.72" long 11 slots to accommodate various eye relief adjustments 3.8 oz. Aircraft-grade aluminum Includes 2 hex wrenches, hex screw and set screw Barrel droop is a common issue in some air guns, but it can make it difficult to use a scope. To get the most accuracy from your air rifle, mount a scope, but don’t put it directly on the airgun’s original rail. Instead, mount this great adapter, which offers 10" of upward compensation (at 30 yds.), and then mount your scope. You’ll wonder how you ever got along without it!

UTG Crime-Buster Law enforcement complete modular equipment system $51 Innovative modular design with versatile features. Battle ready construction provides durability and comfort. Premium composite material and workmanship for intense use and protection. Quick attachment of components with absolute locking and full adjustability. Great field gear for law enforcement, security, military personnel and sport enthusiasts. Holster Dimensions: Length: 6 inches Width: 4 inches – 2 inches Belt Dimensions: Length: up to 50 inches For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a lenth that is greater than or equal to the lenght of the holster.

UTG Elite Tactical Leg Holster, Army Digital (Right Handed) $11.94 New Gen with composite padding Tactical design to keep gun in ready position velcro strap adjusts to legs, keepers for height and tension, and snap for holster tension High quality quick release buckle system Extra magazine pouch attached Fits most medium to large frame autos, Glock, Beretta, Taurus, Ruger, Sig, M-1911 and others For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the triggerguard up to the barrel) and a length that is greater than or equal to the length of the holster.

UTG Elite Tactical Leg Holster, Right Hand $11.94 Super strong coated PVC outer shell with soft lining to protect guns. Tactical design to keep gun in ready position buckle straps adjust to leg, keepers for height and tension and snap for holster tension. High-quality Quick-Release Buckle System. Extra magazine pouch attached. Fits most medium to large frame autos, Glock, Beretta, Taurus, Ruger, Sig, M-1911 and others. Dimensions: Length: 9 inches Width: 4.5 inches – 2 inches For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the triggerguard up to the barrel) and a length that is greater than or equal to the length of the holster.

UTG Elite Tactical Leg Holster, Woodland Digital (Right Handed) $11.94 New Gen with composite padding Tactical design to keep gun in ready position velcro strap adjusts to legs, keepers for height and tension, and snap for holster tension High quality quick release buckle system Extra magazine pouch attached Fits most medium to large frame autos, Glock, Beretta, Taurus, Ruger, Sig, M-1911 and others For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the triggerguard up to the barrel) and a length that is greater than or equal to the length of the holster.

Winchester 3-9×32 Rifle Scope $41.99 3-9×32 rifle scope is your best choice for general field use when shooting at smaller, air gun-sized target. Tough construction is fog proof and shock resistant. Includes 1", see-thru rings that will fit most air rifles equipped with 3/8" or 11mm dovetails. Fully-adjustable for windage and elevation; includes removable lens covers. Can be used with break barrel, pneumatic, BB or CO2 powered air rifles. 1" diameter tube. 100 Yd FOV: 40′@3x – 13.1′@9x. Shockproof and fogproof are both there!

UTG Special Ops Universal Tactical Leg Holster, Army Digital Camo $17.94 Melt into the environment…go digital! Special Ops universal tactical leg holster Army digital camo Double thumb-break security system Deluxe non-slip holster pad Non-slip, fully removable, elastic leg strap for secure function Velcro close for longer guns Fully adjustable & removable belt hanger Heavy-duty buckle Extra mag pouch Fits medium- to large-frame guns 7"Lx3.5"W For the best fit, use with pistols 2" to 3.5" wide (from the bottom of the triggerguard up to the barrel) and at least 7" long.

UTG Special Ops Universal Tactical Leg Holster, Woodland Digital Camo $17.94 Melt into the environment…go digital! Special Ops universal tactical leg holster Woodland digital camo Double thumb-break security system Deluxe non-slip holster pad Non-slip, fully removable, elastic leg strap for secure function Velcro close for longer guns Fully adjustable & removable belt hanger Heavy-duty buckle Extra mag pouch Fits medium- to large-frame guns 7"Lx3.5"W For the best fit, use with pistols 2" to 3.5" wide (from the bottom of the triggerguard up to the barrel) and at least 7" long.

MTM Case-Gard Site-N-Clean Rest & Carry Case $73.73 Site-N-Clean rest Carry case with handle & room for storage 2 rubber-padded forks Rear fork is removable Forks are adjusted & held in place by using 2 of the 4 slots in the base Rear adjustment knob allows for precise horizontal positioning Ideal for sighting-in air rifles or as a gun maintenance rest 11"x20"x4" closed MADE IN USA If you’d like an all-in-one unit that you can use for cleaning, maintaining and sighting-in your air rifles, the Site-N-Clean rest will do all tasks well. The wide base of the case stabilizes the rest. Take it to the range, sight-in your gun and then use it for any maintenance or cleaning you have to perform. Can also be used with firearms and airsoft guns. The handy case has room to store your oils, lubes, and cleaning gear and tools. Put a padlock on the case to prevent others for accessing the case’s contents.

Dewey 26" Coated Rod, Jag, .177 – .20 Caliber $43.19 Nylon-coated stainless steel rod protects your air gun bore. Smooth, easy rotating handle glides on a ball bearing so cleaning is made even easier. Fits .177 – .20 caliber airguns. Threaded end is 5-40 female. Includes a jag.

11" .177 Dewey Pistol Rod & Jag $31.14 Nylon-coated stainless steel rod helps prevent scratching your delicate air gun bore. Smooth, easy rotating handles glide on a ball bearing so cleaning is made even easier. Fits .177 caliber air pistols. Threaded end is 5-40 female. Incl. jag.

Gamo Air Gun Oil $3.54 This is the recommended oil for your Gamo airgun. General purpose oil for all airguns. The dispenser has a fine tip for lubricating small areas and moving components. DO NOT USE IN SPRING PISTON CHAMBER. Always make sure your airgun is unloaded before cleaning or oiling.

25 inch .20 Caliber Coated Dewey Rod & Jag $43.19 Nylon-coated stainless steel rod helps prevent scratching your delicate air gun bore. Smooth, easy rotating handles glide on a ball bearing so cleaning is made even easier. Fits .20 caliber airguns. Threaded end is 5-40 female. Incl. jag.

UTG Scope Mount Base, Fits RWS Diana Rifles, Gamo Whisper & Others $21 Fits guns with the T05 trigger. In 2011, Diana introduced the T06 trigger and it also has a longer rail. This adapter does NOT fit the guns with a longer rail. Fits RWS Diana breakbarrel rifles that have no barrel droop Also fits Gamo rifles with a raised scope rail Attaches to rifle’s 11mm scope rail Special "recoil shock shoulder" stops scope shift–forever! Hide’s rifle’s 11mm scope rail; looks professional Scope base provides secure scope mounting with Weaver/Picatinny mounts 3 hex screws attach base to your Diana rifle Includes 2 hex wrenches Does not fit RWS Diana 46 or Schutze rifles

WE Hi Capa 5.1 Series CO2 28 Round Magazine $51.54 TSD Tactical Hi Capa 5.1 Series CO2 31 Round Magazine. Brand new design, same size and demension as a WE 5.1 Hi Capa green gas magazine. Fits a 12gram CO2 cartridge, magazine fits all Baby Hi-Capa, 4.3 Hi-Capa, and all 5.1 Hi-Capa including Dragon models. No modifications required for use in all WE green gas blow pistols. New Design Same Size as Green Gas Magazine 28rd Capacity Fits 1-12gram CO2 Cartridge 12gr CO2 cartridge provides from 45 to 55 shots. CO2 bleeds out from the barrel when a small amount of CO2 left in the cartridge.

Hyper-Velocity Field Pellets, Type 1 for Standard Guns, .22 Cal, 11.3 Grains, Pointed, Lead-Free, 100ct $8.39 .22 caliber 11.3 grains Pointed Lead-free Type 1 for standard guns 100ct Skenco airgun pellets are lead free and contain no tin, precision two piece construction. The plastic skirt creates superior air seal and reduces friction in the barrel. These zinc and aluminum alloy pellets are totally environment friendly. They develop approximately 20% higher velocities than typical lead pellets and penetrate better than any other pellet available in the market today. Unbeatable combination of Quality and Value. Type 1 .22 (5.5 mm) Green Plastic Sabot, Steel Top Made for most .22 (5.5 mm) airguns These pellets WILL NOT FIT Crosman and Daisy magazines! Will not fit Gamo or Umarex metal magazines (Beretta, Colt, Walther Lever-Action rifle, etc.) .

UTG Deluxe Universal Horizontal Shoulder Holster $14.39 High quality and very cleverly designed shoulder holster with loaded features. Universal design to fit most popular auto pistols and revolvers. Modular design allows for both left and right handed use. Each ring includes a padded shoulder harness, and a holster with soft lining to protect guns and two mag pouches. All components are fully adjustable with Velcro straps attached to web belt for holster/pouch tension. Tactical design to keep gun in ready position and still out of the way. Holster Dimensions: Length: 8 inches Width: 4 inches – 2.5 inches For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a length that is greater than or equal to the length of the holster.

UTG Deluxe Universal Horizontal Shoulder Holster, Army Digital Camo $14.39 Melt into the environment…GO DIGITAL! UTG Digital Patterned Tactical Armor – Blend in stealthily and yet stand tall, presenting the most professional image! High quality and very cleverly designed shoulder holster with loaded features. Universal design to fit most popular auto pistols and revolvers. Modular design allows for both left and right handed use. Each ring includes a padded shoulder harness, and a holster with soft lining to protect guns and two mag pouches. All components are fully adjustable with Velcro straps attached to web belt for holster/pouch tension. Tactical design to keep gun in ready position and still out of the way. Holster Dimensions: Length: 8 inches Width: 4 inches – 2.5 inches For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a length that is greater than or equal to the length of the holster.

UTG Deluxe Universal Horizontal Shoulder Holster, Woodland Digital Camo $14.39 Melt into the environment…GO DIGITAL! UTG Digital Patterned Tactical Armor – Blend in stealthily and yet stand tall, presenting the most professional image! High quality and very cleverly designed shoulder holster with loaded features. Universal design to fit most popular auto pistols and revolvers. Modular design allows for both left and right handed use. Each ring includes a padded shoulder harness, and a holster with soft lining to protect guns and two mag pouches. All components are fully adjustable with Velcro straps attached to web belt for holster/pouch tension. Tactical design to keep gun in ready position and still out of the way. Holster Dimensions: Length: 8 inches Width: 4 inches – 2.5 inches For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a length that is greater than or equal to the length of the holster.

UTG Elite Tactical Leg Holster, Left Handed $11.94 Super strong coated PVC outer shell with soft lining to protect guns. Tactical design to keep gun in ready position Velcro strap adjusts to legs, keepers for height and tension and snap for holster tension. High quality Quick Release Buckle System. Extra magazine pouch attached. Fits most medium to large frame autos, Glock, Beretta, Taurus, Ruger, Sig, M-1911 and others. Dimensions: Length: 9 inches Width: 4.5 inches – 2 inches For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a length that is greater than or equal to the length of the holster.

Large Aluminum Pistol Case -Silver $71.94 This beautiful, convenient and lightweight multi-purpose aluminum pistol case is large enough to carry extra ammunition and a cleaning kit. A foam barrier stabilizes all items in the case by compression. This locking case comes with two keys, making it safer from prying eyes and hands. Outside Dimensions: 18"L x 13"W x 5"H Inside Dimensions: 17"L x 12"W x 5"H

Loop for .177 to .20 Caliber $4.2 Superb, premium quality .177-.20 caliber loop. Turned from brass with a 5-40 tpi male threaded end that fits the Dewey Rods that we carry. Looped end keeps patches in position for fast, effieient cleaning but patches are still easy to change. Use with caution. Over use can damage some bores. Do not use on brass bores.

Nylon Bore Rifle Brush – .177 cal. $3.6 Tough nylon bristles that reach in and loosen built up lead or dirt from lands and grooves without leaving a cooper residue. 5-40 tpi male threaded end fits the Dewey Coated cleaning rods. Looped end helps protect delicate rifling. Use with caution. Over use can damage some bores. Can be used on brass bores.

Otis 085 Ultra Bore Solvent, 2 oz. $5.94 Cleans, lubricates and protects against rust all in one easy application. Removes all traces of lead fouling that can accumulate in your air rifle or pistol’s bore. Just wet a patch and pull through your bore until all traces of lead are removed or until the patch comes out clean. Leaves your bore bright and ready to shoot. Will not cause build up or leave a residue. The same bore cleanser that is included in the Flex Cleaning Kit.

Plano Green Camo Shooters Case – Small $35.94 -Two roomy lift-out trays -Staggered yoke system (gun rest) -Comfortable over-molded handle -Holds cleaning and gunsmithing gear -Plano green camo finish -18"Lx9"Wx13.5"H Case does not include gun or other contents. Plano lists the color as camo, but it appears to be solid green with some variations. Your case may not be the exact same color and/or pattern as shown in our pictures.

Plano Green Camo Shooters Case – Large $33.59 -Great for larger hard-to-store items -One large lift-out tray -Comfortable handle -Staggered yoke system (gun rest) -Holds all your cleaning and gunsmithing gear -Plano green camo finish -22"Lx14.25"Wx11.5"H Case does not include gun or other contents. Plano lists the color as camo, but it appears to be solid green with some variations. Your case may not be the exact same color and/or pattern as shown in our pictures.

UTG 30mm Red/Green Dot Sight, Integral Picatinny Mounting Deck $41.94 Red/green dot sight 1x magnification 30mm objective diameter 1/2 MOA click value @ 100 yds 38mm tube diameter 4.0 MOA dot 16.5" field of view @ 100 yds 25mm exit pupil Flexible eye relief 3.74" 7.4 oz Incl. 3V CR2032 battery, flip-open lens caps, cleaning cloth & manual

Dewey .177 Bore Mop $4.74 High quality bore mop makes fast work of tough bore cleaning chores. Durable all-cotton material is bonded to a non-embedding brass core. Can be soaked with solvent or used as a swab for paste cleaners. Features 5-40 tpi male thread; fits the .177 Dewey Coated Rods that we carry also. These mops will fit the following Dewey rod.

Shooters Ridge Shooting Rest and Gun Vise, Adjustable, Collapsible $71.99 Shooting rest with gun vise 360-degree rotation Quick major and minor elevation adjustments Collapses for easy storage Leather-covered rear gun vise for cleaning and maintenance Durable, high-tech painted finish with heavy-duty steel construction If you’re hunting and need to rest your gun while you wait for quarry to cross your path, this rest is just the ticket. It’s also a great rifle rest if you shoot benchrest. Quality materials, durable products…that’s Shooters Ridge.

G&G Armament Red Dot Sight, Weaver/Picatinny Mount $107.99 Red dot sight Incl. additional 3/8" Weaver/Picatinny mount & cleaning cloth Use this G&G Armament red dot sight to enhance the accuracy of your favorite firearm, airgun or airsoft gun. Simply unscrew the two large base screws to attach the red dot sight on your gun’s tactical rail.

36" .22 & .25 Caliber Coated Dewey Rod & Jag $43.19 Nylon-coated stainless steel rod helps prevent scratching your delicate air gun bore. Smooth, easy rotating handles glide on a ball bearing so cleaning is made even easier. Fits .22 & .25 caliber air guns. This rod has an 8-32 threaded end and will not fit .177 caliber brushes and jags. Incl. jag.

MTM Case-Gard Predator Shooting Rest, for Rifles & Pistols $52.74 Predator shooting rest Use with rifles and pistols Lightweight & easily adjusts Rock-solid stable (4 legs) Buttstock support for long guns quickly removes so you can use the front rest with handguns Precision height adjuster so you can zero-in for pinpoint accuracy Front rubber shooting pad will not mar your gun & steadies any gun, regardless of the barrel or stock shape Rest extends from 20" to 26.25" Front pad height adjusts from 8.5" to 11.5" Folds down to 22"x20" for easy storage 3.5 lbs MADE in USA The Predator shooting rest is lightweight, yet stable. It accommodates airguns, airsoft guns and firearms. If you shoot both rifles and pistols, this is the ideal rest. Converting your Predator shooting rest from a long gun to a handgun configuration will take you just a few seconds. Plus, the entire until collapses down to a compact package for easy storage.

UTG Scope Mount Base, Fits RWS Diana 48, 52, 54 & 460 Magnum with TO5 Trigger, Compensates for Droop & Stops Scope Shift $22.74 We strongly recommend that you use a 2-piece Weaver scope mount that has 4 screws on each ring cap.

UTG Scope Mount Base, Fits RWS Diana 34, 36, 38, & 45 with TO5 Trigger, Compensates for Droop & Stops Scope Shift $22.74 We strongly recommend that you use a 2-piece Weaver scope mount that has 4 screws on each ring cap.

Leapers UTG 4×32 Rifle Scope, Mil-Dot Reticle, 1/4 MOA, 1" Tube, 3/8" See-Thru Rings $41.94 Rifle scope 4x magnification 32mm objective lens (angled) 1" tube 1/4 MOA (1/4" click value @ 100 yds) Mil-dot reticle Sapphire lens coatings 35 yds parallax setting Finger-adjustable turrets 32′ field of view @ 100 yds 3.4" eye relief 8mm exit pupil 13.1 oz. 12.20" long Includes flip-open lens covers, 3/8" medium-profile rings, hex wrench, hex screw, cleaning cloth and owner’s manual Other features: True Strength scope Nitrogen-filled Shockproof Fogproof Rainproof

UTG Sub-Compact ITA Red/Green Dot Sight, 30mm Tube, Weaver/Picatinny Mount $55.14 Red/green dot sight 1x magnification 34mm objective lens 30mm tube 1/2 MOA (1/2" click value @ 100 yds) 4 MOA dot 60′ field of view @ 100 yds Flexible eye relief 28mm exit pupil 7.5 oz. 3" long Incl. 3V CR1620 lithium battery, hex screw, 2.5mm Allen wrench, flip-open lens caps, cleaning cloth & manual Other features: True strength Adjustable illumination knob Integral quick-detach Weaver/Picatinny mount with Lever Lock This is a very tiny dot sight! In fact, most lasers are longer than this dot sight. This UTG dot sight will fit just about any pistol or rifle, no matter how compact, as long as it’s got a Weaver or Picatinny rail. Suitable for air rifles, air pistols, airsoft guns and firearms.

Evanix 4×32 Hellfire Rifle Scope & Laser, Circle Duplex Reticle w/Mil-Dots, 1/4 MOA, 11mm Mount $239.99 Rifle scope & Class II laser 4x magnification 32mm objective lens 1/4 MOA (1/4" click value @ 100 yds Circle duplex reticle w/mil-dots 5" long w/out sunshade, 6.6" long with sunshade Uses 3 LR44 or AG13 batteries Includes lens cover, 11mm ring, 2 hex wrenches, cleaning cloth and laser with remote pressure switch This compact scope and laser combo will come in handy when you’re hunting with your air rifle or rimfire gun and need extra help pinpointing your quarry. Note: The manual shows a mount with 3 thumbscrews, but the mount that comes with this scope has only 2 thumbscrews. It also states that the mount fits either Weaver or 11mm dovetails. It does not. It fis only 11mm dovetails.

UTG 4×32 Compact CQB Rifle Scope, Red-Green Illuminated Mil-Dot Reticle, 1/4 MOA, 1" Tube, Quick-Detach Weaver/Picatinny Rings $71.99 Rifle scope 4x magnification 32mm objective lens 1" tube 1/4 MOA (1/4" click value @ 100 yds) Illuminated mil-dot reticle (red-green*) 100-yd parallax setting 27 ft field of view @ 100 yds 3.8" eye relief 8mm exit pupil 11.60 oz. 8.11" long Includes 2 CR1620 batteries, flip-open lens caps, 3 hex wrenches, hex screw, quick-detach Weaver/Picatinny rings, manual & cleaning cloth Other features: True Strength scope Nitrogen-filled Shockproof Fogproof Rainproof Red/green dual illumination* Zero lock/reset target turrets Side wheel illumination adjustment Angled sunshade Black matte finish *If you don’t use the illumination, the reticle will be black.

UTG 4×32 Wide-Angle Crossbow Scope, Illuminated 5-Step Reticle, 1/4 MOA, 1" Tube, Low Max Strength Lever Lock Weaver Rings $71.99 Crossbow scope 4x magnification 32mm objective lens 1" tube 1/4 MOA (1/4" click value @ 100 yds) 5-step reticle (red/green illuminated*) 50 yds parallax setting 27.2 ft field of view @ 100 yds 3.8" eye relief 8mm exit pupil 12.3 oz. 8.19" long Includes 1 CR1620 lithium battery, flip-open lens caps, 3 hex wrenches, low Max Strength Lever Lock quick-detach Weaver/Picatinny rings, owner’s manual and cleaning cloth Other features: True Strength scope Nitrogen-filled Shockproof Fogproof Rainproof Zero lock/reset target turrets Side wheel adjustable turret (SWAT) Angled objective Black matte finish *If you don’t use the illumination, the 5-step reticle will be black. A sturdy, clear scope that delivers maximum light transmission for crossbow hunting.

UTG 5th Gen 4-16x40AO Rifle Scope, Illuminated Mil-Dot Reticle, 1/4 MOA, 1" Tube, Weaver Rings $83.99 Rifle scope 4-16x magnification 40mm objective lens (adjustable objective) Emerald coated lenses to achieve maximum light transmission for best clarity 1" tube 1/4 MOA (1/4" click value @ 100 yds) Mil-dot reticle (red-green illuminated) 5 yds to infinity parallax adjustment 23 ft to 5.8 ft field of view @ 100 yds 3.2 inches to 3 inches eye relief 10mm to 2.5mm exit pupil 20.1 oz. 14.37" long Includes flip-open lens covers, Weaver/Picatinny rings w/4 screws per ring cap, Allen wrench, CR2032 3-v high-energy lithium battery, hex screw, cleaning cloth, manual and mil-dot chart Other features: True Strength scope Nitrogen-filled Shockproof Fogproof Rainproof Zero lock/reset Target turrets

Hawke Sport Optics 10x32mm Endurance PC Binoculars, Close Focus, Black $215.99 Hawke Sport Optics Endurance PC binoculars 10x magnification 32mm objective lenses Fully multi-coated lenses 340 ft @ 1000 yds field of view 6.6 ft close focus BAK4 roof prism Twist-up eyecups accommodate eyeglasses Phase-corrected lenses Textured, high-grip black rubber exterior Nitrogen-filled Fogproof Waterproof 19 oz. Includes carry case with detachable neck strap, removable neck strap for binoculars, protective lens caps and cleaning cloth These Hawke Sport Optics 10x32mm Endurance PC binoculars have a good depth of field, making them ideal for birding, hunting, field target and target shooting. Most binocs will not focus clearly at such close distances.

Hawke Sport Optics 8x32mm Endurance PC Binoculars, Close Focus, Black $203.99 Hawke Sport Optics Endurance PC binoculars 8x magnification 32mm objective lenses Fully multi-coated lenses 426 ft @ 1000 yds field of view 6.6 ft close focus BAK4 roof prism Twist-up eyecups accommodate eyeglasses Phase-corrected lenses Textured, high-grip black rubber exterior Nitrogen-filled Fogproof Waterproof 19 oz. Includes carry case with detachable neck strap, removable neck strap for binoculars, protective lens caps and cleaning cloth These Hawke Sport Optics 8x32mm Endurance PC binoculars have a good depth of field that lets you clearly see details, details, details! Ideal for birding, hunting, field target and target shooting.

Leapers 5th Gen 3-9×40 TF2 Scope, Mil-Dot Reticle, 1/4 MOA, 1" Tube, 3/8" Dovetail Rings $53.94 Rifle scope 3-9x magnification 40mm objective lens 1" tube 1/4 MOA (1/4" click value @ 100 yds) Mil-dot reticle 35 yds parallax setting 36 ft to 12 ft field of view 3.3" to 3.1" eye relief 9.9mm to 4.5mm exit pupil 14.8 oz. 13.58" long Includes: Flip-open lens caps, hex wrench, hex screw, 3/8" medium dovetail rings, cleaning cloth & manual Other features: True Strength scope Nitrogen-filled Shockproof Fogproof Rainproof Angled integral sunshade TF2 target turrets Black matte finish Mount this UTG riflescope on any air rifle or rimfire rifle equipped with a 3/8" dovetail rail or grooves. This scope is part of Leapers’ True Strength series and is shockproof, fogproof and rainproof.

AIM Sports Special Ops Edition Red/Green Dot Sight, 4 Ill. Reticles, Weaver/Picatinny Mount $65.94 Dot sight 1x magnification 34×24 objective diameter 1 MOA (click value @ 100 yds) 3 MOA Dual illuminated red & green dot Adjustable brightness settings Unlimited eye relief 7-position rheostat adjusts brightness 4 different reticles Integrated Weaver/Picatinny mounting system 4.2 oz 3" long Other Features: Anti-reflection coating on target side Windage & elevation adjustments Waterproof Shockproof Incl. (2) hex wrenches, cleaning cloth & CR2032 battery Mount this dual illuminated AIM Sports red/green dot sight on any Weaver/Picatinny tactical rail equipped airgun, airsoft gun or firearm. The dot sight is shockproof & waterproof and is perfect for use in any weather condition. Four different reticles and windage & elevation adjustments add versatility & accuracy to your favorite gun!

AIM Sports Warfare Edition Red/Green Dot Sight, 4 Ill. Reticles, Weaver/Picatinny Mount $65.7 Dot sight 1x magnification 34×24 objective diameter 1 MOA (click value @ 100 yds) 3 MOA Dual illuminated red & green dot Adjustable brightness settings Unlimited eye relief 7-position rheostat adjusts brightness 4 different reticles Integrated Weaver/Picatinny mounting system 4.2 oz 3" long Other Features: Anti-reflection coating on target side Windage & elevation adjustments Waterproof Shockproof Incl. (2) hex wrenches, cleaning cloth & CR2032 battery Mount the AIM Sports Warfare Edition red/green dot sight on any airgun, airsoft gun or firearm equipped with a Weaver/Picatinny tactical rail. The dot sight features 4 different reticles and windage & elevation adjustments for added versatility. This dot sight is perfect for use in adverse weather conditions and is shockproof, fogproof & waterproof.

Laser Genetics ND5 Laser, Green, 5-Mile Visibility $347.94 BSA Laser Genetics ND5 laser Green laser with Linear Optical Collimator Adjustable beam diameter & intensity Micro beam (smallest diameter) is visible up to 5 miles for signaling or search/rescue ops Larger-diameter beams illuminate trails or paint objects up to 400 yds away Nitrogen-filled to prevent fogging Battery has 8 hrs of continuous use Made of high-tech aluminum Anodized matte black finish 532nm laser 20mW output Class 2M Uses 2 CR123V lithium batteries (included) 9.75"x2.25" 1.20 lbs. 45mm lens diameter 1-year manufacturer’s warranty Includes 2 CR123A lithium batteries, cleaning kit & padded carrying case

UTG 6th Gen 6x32AO Bug Buster Rifle Scope, Illuminated Mil-Dot Reticle, 1/4 MOA, 1" Tube, Quick-Detach Weaver Rings $77.94 Rifle scope 6x magnification 32mm objective lens (adjustable objective) 1" tube 1/4 MOA (1/4" click value @ 100 yds) Mil-dot reticle (red/green/black illumination*) 3 yds to infinity parallax adjustment 20 ft field of view @ 100 yds 3.5" eye relief 5.3mm exit pupil 13.5 oz. 8.11" long Includes 3V CR1620 battery, flip-open lens caps, 2 hex wrenches, 2" sunshade, quick-detach Weaver rings, cleaning cloth & manual Other features: True Strength scope Nitrogen-filled Shockproof Fogproof Rainproof Zero lock/reset target turrets Black matte finish *If you don’t use the illumination, the reticle will be black.

UTG 3x Tactical Dot Sight Magnifier, Quick-Detach Weaver/Picatinny Mount, Riser $65.99 3x tactical magnifier Use with dot sights only Adjustable lens for dioptric correction Multiple mounting holes for optimum eye relief 4.41" long 6.6 oz. Nitrogen-filled Multi-coated optics Includes quick-detach Lever Lock Weaver/Picatinny mount, riser, hex wrench, slotted screw, flip-open lens caps, spring washers, cleaning cloth and owner’s manual The UTG 3x dot sight tactical magnifier enlarges the dot on your sight and makes it easier to see against your target in almost any type of lighting condition. Super for pinpoint accuracy, especially during dawn and dusk. Distance from rail to center of magnifier is 30mm when used with the just the mount. Add the riser, and you increase the height by another 10mm.

UTG 3-9x40AO Rifle Scope, Illuminated Mil-Dot Reticle, 1/4 MOA, 1" Tube, See-Thru Max Strength Twist Lock Weaver Rings $95.99 Rifle scope 3-9x magnification 40mm objective lens (adjustable objective) 1" tube 1/4 MOA (1/4" click value @ 100 yds) Illuminated mil-dot reticle (red/green)* 5 yds to infinity parallax adjustment 34.5 ft to 11.5 ft field of view 3.9" to 3.2" eye relief 13mm to 4.5mm exit pupil 21.1 oz. 12.60" long Includes 1 CR2032 3V high-energy lithium battery, flip-open lens caps, 2 hex wrenches, Twist Lock Max Strength Weaver/Picatinny rings, cleaning cloth and owner’s manual *If you don’t use the illumination, the reticle will be black. Other features: True Strength scope Nitrogen-filled Shockproof Fogproof Rainproof Emerald-coated lenses Zero lock/reset target turrets Integral sunshade Black matte finish What an incredible bargain. From the emerald coating on all the optics to the illumination options, this scope really delivers the goods for any type of shooting discipline…airsoft, airguns or firearms.

UTG 1-4×24 CQB Rifle Scope, Illuminated Circle-Dot Reticle, 1/2 MOA, 30mm Tube, Low Max Strength Lever Lock Weaver Rings $131.99 Rifle scope 1-4x magnification 24mm objective lens 30mm tube 1/2 MOA (1/2" click value @ 100 yds) Circle-dot reticle (red/green illuminated*) 100 yds parallax setting 108 to 27.5 ft field of view @ 100 yds 4.5" to 3.2" eye relief 17.8mm to 6mm exit pupil 16.9 oz. 9.76" long Includes 1 CR2032 lithium battery, flip-open lens caps, 2 hex wrenches, low Max Strength Lever Lock quick-detach Weaver/Picatinny rings, owner’s manual and cleaning cloth Other features: True Strength scope Emerald-coated optics (95% light transmission) Nitrogen-filled Shockproof Fogproof Rainproof Zero lock/reset target turrets Side wheel adjustable turret (SWAT) Angled objective Black matte finish *If you don’t use the illumination, the circle-dot reticle will be black. A very compact scope that doesn’t add much weight to your rifle. UTG scopes with emerald-coated optics deliver superior light transmission. Combine that with the 30mm tube, and you’ll see clear, sharp images.

UTG 1-4×24 CQB Rifle Scope, Illuminated Floating Mil-Dot Reticle, 1/2 MOA, 30mm Tube, Low Max Strength Lever Lock Weaver Rings $119.99 Rifle scope 1-4x magnification 24mm objective lens 30mm tube 1/2 MOA (1/2" click value @ 100 yds) Floating mil-dot reticle (red/green illuminated*) 100 yds parallax setting 108 to 27.5 ft field of view @ 100 yds 4.5" to 3.2" eye relief 17.8mm to 6mm exit pupil 16.9 oz. 9.76" long Includes 1 CR2032 lithium battery, flip-open lens caps, 2 hex wrenches, low Max Strength Lever Lock quick-detach Weaver/Picatinny rings, owner’s manual, mil-dot chart and cleaning cloth Other features: True Strength scope Emerald-coated optics (95% light transmission) Nitrogen-filled Shockproof Fogproof Rainproof Zero lock/reset target turrets Side wheel adjustable turret (SWAT) Angled objective Black matte finish *If you don’t use the illumination, the circle-dot reticle will be black. A very compact scope that’s ideal for anyone who needs a bright, sharp image. Mount this on your air rifle, firearm or airsoft gun for great viewing and superior light transmission.

UTG 4x32AO Bug Buster Compact Rifle Scope, Illuminated Mil-Dot Reticle, 1/4 MOA, 1" Tube, Low Max Strength Lever Lock Weaver Rings $71.99 Compact rifle scope 4x magnification 32mm objective lens (adjustable objective) 1" tube 1/4 MOA (1/4" click value @ 100 yds) Mil-dot reticle (red-green illuminated*) 3 yds to infinity parallax adjustment 27.2′ field of view @ 100 yds 3.8" eye relief 8mm exit pupil 13.5 oz. 8.11" long Incl. CR1620 3V lithium battery, 2" sunshade, 2.5mm Allen wrench, 3mm Allen wrench, low Max Strength Lever Lock quick-detach Weaver/Picatinny rings, manual, mil-dot chart, cleaning cloth & flip-open lens caps Other features: True Strength scope Emerald-coated optics (95% light transmission) Nitrogen-filled Shockproof Fogproof Rainproof *If you don’t use the illumination, the reticle will be black. One of the smallest high-quality scopes made today, the UTG Bug Buster has earned a faithful following among airgunners who have literally used this for shooting bugs with their air rifles! From the emerald coating on the lens to the illumination options, this scope really delivers the goods for any type of shooting discipline…bugs and otherwise!

1x26mm ITA Combat Red/Green Dot Sight, 1/2 MOA, 30mm Tube, Quick-Detach Low & High Weaver/Picatinny Mounts $55.14 ITA combat dot sight 1x magnification 26mm objective lens diameter 30mm tube Red or green illuminated dot (dot is black when not ill.) 4 MOA dot 1/2 MOA (1/2" click value @ 100 yds) WIndage/elevation adjustments Unlimited parallax adjustment 70′ field of view @ 100 yds Unlimited eye relief 22mm exit pupil 5.6 oz. 3.94" long Incl. flip-open lens covers, 3V CR1620 lithium battery, Allen wrench, hex screw, 2 quick-detach Weaver/Picatinny mounts, manual and cleaning cloth

Leapers 5th Gen 3-12x40AO Rifle Scope, Ill. Mil-Dot Reticle, 1/4 MOA, 1" Tube, Max Strength See-Thru Weaver/Picatinny Rings $83.94 Rifle scope 3-12x magnification 40mm objective lens (adjustable objective) 1" tube 1/4 MOA (1/4" click value @ 100 yds) Mil-dot reticle (red-green-black* ill.) 5 yds to infinity parallax adjustment 34 ft to 8.5 ft field of view 3.3" to 3" eye relief 13.1mm to 3.3mm exit pupil 18.5 oz. 13.03" long Includes: two 3V CR2032 batteries, flip-open lens caps, 2 hex wrenches, 2 hex screws, see-thru Weaver/Picatinny rings, cleaning cloth & manual Other features: True Strength scope Nitrogen-filled Shockproof Fogproof Rainproof Zero lock/reset target turrets Sidewheel adjustable rheostat Black matte finish *If you don’t use illumination, the reticle will be black. Do you hunt? Shoot field target? Plink? This is the scope for you! What an incredible bargain. From the emerald lens coating to the illumination options, this scope really enhances the accuracy of your favorite air rifle, airsoft gun or firearm!

UTG Accushot 4-16x56AO Rifle Scope, SWAT, EZ-TAP, Illuminated Mil-Dot Reticle, 1/8 MOA, 30mm Tube $239.99 Rifle scope 4-16x magnification 56mm objective lens (adjustable objective) 30mm tube 1/8 MOA (1/8" click value @ 100 yds) Mil-dot reticle (36-color illumination-enhancing*) 10 yds to infinity parallax adjustment 24.4 ft to 6.8 ft field of view @ 100 yds 3.2" to 3" eye relief 14mm to 3.5mm exit pupil 27.4 oz. 16.10" long Includes 1 CR2032 lithium battery, flip-open lens caps, mil-dot chart, owner’s manual and cleaning cloth Other features: True Strength scope Emerald-coated optics (95% light transmission) Nitrogen-filled Shockproof Fogproof Rainproof Built-in color/brightness memory system EZ-TAP Illumination enhancing (IE) technology w/RGB (red-green-black*) in dual-color mode and 36 colors in multi-color mode Zero lock/reset target turrets Side wheel adjustable turret (SWAT) Integral sunshade Black matte finish *If you don’t use the illumination, the mil-dot reticle will be black. Do you hunt? Shoot field target? Plink? Eliminate pesky garden varmints? This is the scope for you! What an incredible bargain. From the emerald coating on the lens to the illumination options, this scope really delivers the goods for any type of shooting discipline.

Laser Genetics ND3 Laser, Green, 3-Mile Visibility, Mounting Accessories $311.94 BSA Laser Genetics ND3 laser Green laser with Rotary Optical Collimator Adjustable beam diameter & intensity Micro beam (smallest diameter) is visible up to 3 miles Larger-diameter beams illuminate trails or paint targets up to 250 yds away Water-resistant Nitrogen-filled to prevent fogging 1" tube (can be mounted on a gun) Battery has 7 hrs of continuous use Made of high-tech aluminum Anodized matte black finish 532nm laser 18mW output Class 2M Uses 1 CR123V lithium battery (included) 6.25"x1.25" 5.5 oz. 1-year manufacturer’s warranty Includes 1 CR123A lithium battery, scope mount (fits 1" scope tube up to 56mm objective lens) w/windage & elevation adjustments, 3/8" & Weaver mounts, binocular/spotting scope mount (9.2mm to 6mm long; 1.25mm threads), remote momentary pressure switch, cleaning kit & padded carrying case Rated to take the 2-way recoil of airguns, including the harsh recoil of springers

Leapers UTG 3-12×44 Accushot Rifle Scope, Illuminated Mil-Dot Reticle, 1/4 MOA, 30mm Tube $165.54 Rifle scope 3-12x magnification 44mm objective lens 30mm tube 1/4 MOA (1/4" click value @ 100 yds) Mil-dot reticle (red/green illuminated*) 35 yds parallax setting 32 ft to 11.5 ft field of view 3.4" to 3.0" eye relief 14.7mm to 3.7mm exit pupil 17.6 oz. 10.59" long Includes 2.5" sunshade, CR2032 3V battery, flip-open lens caps, 4mm Allen wrench, manual & cleaning cloth Other features: True Strength scope Nitrogen-filled Shockproof Fogproof Waterproof Zero lock/reset target turrets Black matte finish *If you don’t use the illumination, the reticle will be black. An illuminated reticle is a necessity if you hunt during dawn or dusk. Switch from red to green illumination, depending on the type of environment and quarry. If you don’t need the illumination, the reticle is black. The 30mm tube will let in more light than a 1" reticle. With 35 yds parallax setting, this makes a good hunting scope.