Clamping Feed

What I get that one out to the maximum ion or a Proto Slg 09?

I have the option to receive either a smart Parts Ion with Virtue Board, 16 inches 2 pieces of all Americans barrel cp trigger and clamping Feed Neck. But i doughts seconds between that and a Proto SLG. Need help.

It depends, if you can get a good price ion defently i whould get it, but I whould rather have a proto SLG 09 in an ion.

Planet Eclipse SLS Part 1 – Paintball Gateway

UTG Red Laser, Integral 3/8" Dovetail Mount w/Adjustable Clamping $33.54 Red laser TS platform & SSS structure for durability Aim & instant-lock for precision Ambidextrous push-button switch & remote pressure switch Anodized black matte finish Uses 4 AG-13 (LR44) alkaline button batteries Includes 3/8" dovetail mount with adjustable clamping pressure

UTG Deluxe Tri-Rail Barrel Mount $11.94 Universal Tri-Rail Barrel Mount Complete with Laser Clamping Feature – Each Rail with 2 Slots.

Leapers Deluxe Shotgun Tri-Rail Barrel Mount $27.54 Shotgun Tri-Rail Barrel Mount Complete with Flashlight Clamping Feature – Each Rail with 5 Slots

Mendoza Diopter Sight, 11mm Dovetail $35.99 Rear sight Peep aperture Micrometer adjustments for windage and elevation Fits any gun with an 11mm dovetail Securely attaches with dual clamping screws Lightweight aluminum Durable, anodized finish

Mendoza Micrometer Sight, 11mm Dovetail $23.99 Open rear sight Micrometer windage and elevation adjustments Fits any gun with an 11mm dovetail Securely attaches with dual clamping screws Lightweight aluminum Durable, anodized finish

AirForce 1" Rings, High, 9.5-13.5mm Dovetail, See-Thru $24 1" rings High profile Fits 9.5 mm to 13mm dovetail See-thru mount Dual-position clamping system Threaded vertical recoil stop pin 4 hex screws/ring for securing scope Twice the clamping area of many conventional mounts Superior scope retention The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Leapers Model 4/15 Scope Mount, Fits Carry Handle $21.54 Weaver mount Fits Model 4/15 carry handle 1" rings 3 adjustable mounting positions for flexible eye relief positioning Flattop adapter with 2 thumbscrews & clamping plate 4 screws per ring cap Made of aircraft-grade aluminum Tight tolerances create a solid fit for extreme tactical environments

Beretta Laser, Fits 92FS Pellet Pistol $31.19 Laser Fits Beretta 92FS pellet pistol Clamps under the barrel Screw mount On/off LED indicators Increase the accuracy of your Beretta 92FS CO2 pellet pistol with this laser. It slides on under the barrel and holds with clamping pressure (screws tighten the mount). Not suitable for the Beretta Elite II air pistol or any handgun that has an accessory rail under the barrel.

Walther P22 S 7rd Blank Mag $23.94 7-rd mag Fits Walther P22 S blank gun Holds 9mm PAK blank ammo only Use only blank ammo Use only in the indicated blank-firing gun Will not accept live ammo rounds Will not properly feed any type of ammo in a firearm

Air Venturi .45 Cal, 180 Grains, Solid Core, Soft Lead, Round Nose, 50ct $19.8 .45 caliber 180 grains Round nose Solid core Soft lead 50ct Big bore air rifles and air pistols will deliver greater accuracy if you use ammo that’s uniform in size and consistently high quality. That’s what you’ll get when you feed your airgun Air Venturi ammo.

Heckler & Koch P30 Blank Mag, Holds 15 rds $23.51 15-rd mag fits H&K P30 blank gun Use only blank ammo Use only in the indicated blank-firing gun Will not accept live ammo rounds Will not properly feed any type of ammo in a firearm

Walther P99 S 15rd Blank Mag $21.59 15-rd mag Fits Walther P99 S blank gun Holds 9mm blank ammo only Use only blank ammo Use only in the indicated blank-firing gun Will not accept live ammo rounds Will not properly feed any type of ammo in a firearm

AirForce Self-Centering Tri-Rail, 11mm Dovetail $36 Self-centering Tri-rail base 11mm dovetail for mounting optics Mounting surfaces on 3 sides 6 hex screws secure the rail For AirForce Airguns Condor, Talon & Talon SS air rifles & TalonP air pistol Full-length clamping guarantees a rock-solid foundation for your airgun accessories. Made for AirForce sporting air rifles and the TalonP air pistol, the Tri-rail lets you load up your air gun with lots of accessories that make hunting and shooting a lot more fun…and also increases accuracy.

AirForce 11mm-to-Weaver Adapter $39.9 11mm (or 3/8") dovetail-to-Weaver/Picatinny adapter 3.04" clamping & mounting length .69" high 4.12" overall length 4 hex screws secure the base Includes a hex wrench Use on AirForce rifles and pistols or any other airgun or rimfire that has a 3/8" or 11mm dovetail. Weaver/Picatinny scope bases offer a much tighter grip on your scope mounts. This would be an especially good addition to any hard-recoiling spring-piston rifle. The cross slots deliver extra gripping area for the rings, making it almost impossible for the scope mount to shift. You may need to buy two of these adapters, depending on the length of the scope mount you’re using and on the length of the scope rail to which you’re attaching this adapter.

BKL 1-Pc Adjustable Scope Mount, 1" Rings, 3/8" Dovetail, Black $79.8 1-pc scope mount 3/8" dovetail Low profile 1" rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8" side rails for mounting other accessories 2.5" of clamping length 4" overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz. 6 base screws Matte black Includes 3 hex wrenches Got barrel droop? This new mount will help you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails offer more space to add a laser and a flashlight to augment a scope.

BKL 1-Pc Adjustable Scope Mount, 30mm Rings, 3/8" Dovetail, Black $79.8 1-pc scope mount 3/8" dovetail Low profile 30mm rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8" side rails for mounting other accessories 2.5" of clamping length 4" overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz. 6 base screws Matte black Includes 3 hex wrenches Got barrel droop? This BKL Tech mount lets you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails give you room to mount a laser and flashlight.

UTG Everblast M87 Hi-Capacity Magazines $8.99 Buy an extra magazine so you can reload faster! Large High Capacity Wind-up Magazine.High Capacity magazines have a loading door on the top. Simply pour in BBs until the compartment is full. On most magazines you should put at least 100 BBs in the magazine before you initially start to wind it or it will not be able to feed correctly. To wind the magazine turn the wheel on the bottom of the magazine. As you wind the magazine it will make a ticking noise. You will notice that BBs will feed up into the top of the magazine and are visible at the top. Keep winding until the ticking changes to a louder clicking noise which means the magazine is fully wound. Sometimes it is better to wind the magazine after you put it in the gun. If the BB release is bumped while you are putting the magazine into the gun the BBs can spray out and you will have to start all over again.

1911A1 S 8rd Blank Mag, Fits Colt & S&W Blank Pistols $16.79 8-rd mag Fits Colt Government 1911A1 S & S&W 1911 S blank guns Holds 9mm PAK blank ammo only Use only blank ammo Use only in the indicated blank-firing gun Will not accept live ammo rounds Will not properly feed any type of ammo in a firearm

UTG 3/8" Dovetail-to-Weaver/Picatinny Rail Adapter, 2pcs $8.39 3/8" & 11mm dovetail-to-Weaver/Picatinny rail adapter Fits 3/8" and 11mm dovetails on airguns and rimfire guns 1" long .93" wide .24" high .18 oz 2 adapters If your air gun or rimfire gun has a scope dovetail that measures either 11mm or 3/8" (approx. 9.5mm), you can use this lightweight aluminum adapter to attach your Weaver and Picatinny mounts to your smaller 11mm and 3/8" dovetails. This clever device clips into the base of your Weaver or Picatinny mount (both 1-pc mounts and 2-pc mounts), thereby reducing the size of the clamping jaws on the mount! A very easy way to make your mounts more useful for a wider range of guns. In fact, you can leave your optics in the mounts and move them from gun to gun! You’ll still have to resight the gun after attaching the scope, but you won’t have to reset or retighten the scope in the mount.

Crosman Nitro Lubricating Oil for All Airsoft Guns, 57ml $5.63 Crosman Nitro Lubricating Oil reduces friction and prevents airsoft guns from jamming in the battlefield. This high grade silicone oil comes in a compact spray bottle container for easy application during intense skirmish situations. Maintain the reliability of your airsoft gun and order today! 57ml (1.93 fl oz) May increase or decrease muzzle velocity (varies by model) Can be used on new guns, but they may shoot slower for the first 100 Rds after use AEG & spring guns should be lubricated every 3,000 to 6,000 shots Gas guns should be lubricated every 1,000 to 3,000 shots Not recommended for use on o-ring and other plastic components We can not ship Crosman Nitro Lubricating Oil using air services. Please consider this when you choose a shipping method. Instructions: Remove magazine Spray a short burst down the barrel & through the feed tube in the magazine well Remove excess oil & wipe barrel with a swab

Yukon NVRS Tactical 2.5×50 Night Vision Rifle Scope, Weaver Mount $779.99 This is a Gen 1 NV scope and will not stand up to heavy-recoiling firearms or magnum spring-piston airguns. The Yukon NVRS Tactical Internal Focus 2.5×50 uses enhanced optics, a durable, titanium body and sleek design to separate itself from any other night vision riflescope. The NVRS Tactical 2.5×50 has internal focusing ability and an ergonomic design to allow for more comfort during shooting. It is also equipped with a powerful 50mm lens to provide higher resolution and light gathering capabilities, and flip-up lens covers open to reveal quality multicoated optics and an illuminated reticle. A built-in, powerful Pulse infrared illuminator is easily activated to enhance image brightness and increase range in total darkness; a precision windage and elevation adjustment and remote are additional features. The NVRS Tactical 2.5×50 is also digital camera adaptable with the digital camera accessory; other accessories include a laser pointer, AK adapter, IR flashlight and doubler lens, which are all sold separately. The NVRS Tactical 2.5×50 is backed by Yukon’s Limited Lifetime Warranty. Magnification: 2.5x Lens diameter: 50mm Field of view: 15 degrees Resolution, typical(lp/mm): 32-36 Focus range(yd): 1 to infinity Eye relief: 45mm Diopter adjustment: +4,-4 Detection range(yd): up to 230 Recognition range(yd): up to 120 IR illuminator effective distance(yd): up to 100 Reticle type: illuminated red-green duplex Reticle windage/elevation adjustment: 1/2 MOA per click Power supply; battery type feed voltage: (2) AA Estimated power life, w/out IR: up to 50 hours Operating temperature: -22 to +122 (f) Dimensions: 10.0" x 3.1" x 3.3" Weight: 33.5 oz Weaver mount

Be Sociable, Share!

•