I need a clamping Feed Neck?

one I can get a Spyder or token holes Xtra

The Spyder Xtra is here I have Never Used a new black Halo B will be adjusted $ 20 PayPal will ship on Monday at any place where you can send me an email for more information @ paintballmechanic@yahoo.com I have also different colors, but most are Spyder Xtras Black or Blue i can ask anything you need

Wgp Autococker pump problem

UTG Zytel Clamp-on Bipod $9.54 One Year Warranty Made of durable Zytel. Extremely light weight – only 6oz. Clamps around barrel and fits most guns. Folds to be carried in your pocket or bag. Very sturdy and affordable. Best valued economic solution for your practical need. Use on airsoft guns, airguns & firearms.

AirForce Scuba Refill Clamp with Gauge $78.6 Scuba yoke fill station 1/4" AirForce tank adapter Fits scuba tank with standard k-valve 1" diameter micro-gauge reads from 1-5,000 psi across one-third of the gauge face Product may not look exactly like the one shown. Universal! Fits long- & short-necked scuba tanks!

UTG Low-Profile Dragon Claw Clamp-on Barrel Bipod $25.8 High Tech Durable Aluminum Construction Clever Adjustment Wheel for Wide Range of Barrel Sizes – 11mm to 19mm User Friendly Clamp-On Features Unique Posi-Lock Feature to Prevent Tipping Foldable with Fully Adjustable Center Height From 9" to 11"

Airforce Braided Steel Hose, Quick-Disconnect, Fits Older Airforce Refill Clamp & Hand Pump $36 Braided steel hose Quick-disconnect fitting Fits older Airforce refill clamp with gauge (U1012) & older AirForce hand pump (U1014) To fill Talon/Condor rifles, use a refill adapter with quick-disconnect nipple (U1013) to attach the hose’s quick-disconnect This braided steel hose will stand up to many years of use without compromising its integrity. Strong, flexible, reliable…and safe. Current AirForce high-pressure fill devices come with a hose. The older pumps and scuba yokes did not come with a hose. If you have one of the older units and need to replace your hose, this is the item to get.

Swiss Arms Bipod, Includes 3 Mounts $45.54 Swiss Arms bipod Aluminum Folding, telescoping legs Includes 3 mounts: Weaver/Picatinny, barrel clamp & sling swivel stud

UTG Premium 1" Rings, Low, Weaver Mount, See-Thru $8.7 1" rings Low profile See-thru mount Fits Weaver dovetail Special tape inside the rings keeps your scope tight without excessive clamp pressure!

UTG 30mm Rings, Low, Weaver Mount, See-Thru $11.99 30mm rings Low profile Weaver mount See-thru Anodized black matte finish Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1" Rings, High, 9.5-11.5mm Dovetail $11.99 1" rings High profile Fits 9.5mm to 11.5mm dovetail Vertical stop pin The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths. Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Gamo 1" Rings, High, 3/8" & 11mm Dovetail, See-Thru $17.94 1" rings High profile 3/8" & 11mm dovetail See-thru mount Black matte finish The screw on the base lets you adjust the rings to fit 3/8" & 11mm dovetails. The clamp is made to securely fit a range of dovetail widths. Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Walther P22 S 7rd Blank Mag $23.94 7-rd mag Fits Walther P22 S blank gun Holds 9mm PAK blank ammo only Use only blank ammo Use only in the indicated blank-firing gun Will not accept live ammo rounds Will not properly feed any type of ammo in a firearm

Air Venturi .45 Cal, 180 Grains, Solid Core, Soft Lead, Round Nose, 50ct $19.8 .45 caliber 180 grains Round nose Solid core Soft lead 50ct Big bore air rifles and air pistols will deliver greater accuracy if you use ammo that’s uniform in size and consistently high quality. That’s what you’ll get when you feed your airgun Air Venturi ammo.

Heckler & Koch P30 Blank Mag, Holds 15 rds $23.51 15-rd mag fits H&K P30 blank gun Use only blank ammo Use only in the indicated blank-firing gun Will not accept live ammo rounds Will not properly feed any type of ammo in a firearm

Walther P99 S 15rd Blank Mag $21.59 15-rd mag Fits Walther P99 S blank gun Holds 9mm blank ammo only Use only blank ammo Use only in the indicated blank-firing gun Will not accept live ammo rounds Will not properly feed any type of ammo in a firearm

CenterPoint 8×21 Binoculars Explorer Pack, Military Green $43.14 8x21mm Binocular Adjustable, High Tech Headlamp w/ Clamp Attachment Wrist Compass / Thermometer Compact and Lightweight Design Rugged, Water Resistant body Porro K9 Prism System with Multi-Coated Lenses Includes Carry Case and Neck Strap

Beeman 5030M 1" Rings, Medium, 9.5-11.5mm Dovetail $45.54 1" rings Medium profile Fits 9.5-11.5mm dovetail 4 hex screws/ring secure the scope Vertical scope stop pin (removable) The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Beeman 5031 30mm Rings, High, 9.5-11.5mm Dovetail $69.54 30mm rings High profile Fits 9.5-11.5mm dovetail 4 hex screws/ring to secure scope Vertical scope stop pin (removable) The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Beeman 5036 1-Pc Mount w/1" Rings, High, 9.5-11.5mm Dovetail $79.14 1" rings High profile Fits 9.5-11.5mm dovetail 4 hex screws/ring secure the scope The hex screws on the base let you adjust the base to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

UTG Leapers Premium 1" Rings, High, Weaver Mount, See-Thru $14.34 Limited Lifetime Warranty 1" rings High profile See-thru mount Fits Weaver dovetail 4 hex screws/ring secure the scope Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Beeman 5030H 1" Rings, High, 9.5-11.5mm Dovetail $45.54 1" rings High profile Fits 9.5-11.5mm dovetail 4 hex screws/ring secure the scope Vertical scope stop pin (removable) The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Centerpoint 1" Rings, Medium, 3/8" Dovetail $14.39 1" rings Medium profile Fits 3/8" dovetail 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Hawke 1" Rings, Weaver, Low, Black $15.59 1" rings Low profile Fits Weaver/Picatinny rail 4 screws per screw cap, 1 screw per base Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers 30mm Rings, High, 3/8" Dovetail $11.99 Limited Lifetime Warranty 30mm rings High profile Fits 3/8" dovetail 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

AirForce 1" Rings, Medium, 9.5-13.5mm Dovetail $24 1" rings Medium profile Fits 9.5 mm-13mm dovetails 4 hex screws/ring to secure the scope Vertical scope stop The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Leapers 30mm Rings, Medium, 3/8" Dovetail $11.99 30mm rings Medium profile Fits 3/8" dovetail 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1" Rings, Medium, 3/8" Dovetail, 2 Screws/Cap $10.79 1" rings Medium profile Fits 3/8" dovetail Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1" Rings, Medium, 3/8" Dovetail, 4 Screws/Cap $11.99 1" rings Medium profile Fits 3/8" dovetail 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Premium 1" Rings, Medium, Weaver Mount, See-Thru $11.99 Limited Lifetime Warranty 1" rings Medium profile See-thru mount Fits Weaver dovetail 4 hex screws/ring secure the scope Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Mount w/1" Rings, 3/8" Dovetail $17.94 1" rings Medium profile Fits 3/8" dovetail 100mm base length 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Mount w/1" Rings, High, 11mm Dovetail $21.54 1" rings High profile Fits 11mm dovetail 4 hex screws/ring secure the scope 100mm base length 80mm between rings Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Mount w/30mm Rings, High, 11mm Dovetail $17.94 Limited Lifetime Warranty 30mm rings High profile Fits 11mm dovetail 4 hex screws/ring secure scope 100mm base length Vertical stop pinSpecial tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Mount w/30mm Rings, Medium, 3/8" Dovetail $17.34 30mm rings Medium profile Fits 3/8" dovetail 100mm base length 3 hex screws/ring secure the scope Vertical stop pin Limited lifetime warranty Special tape inside the rings keeps your scope tight without excessive clamp pressure!

UTG Everblast M87 Hi-Capacity Magazines $8.99 Buy an extra magazine so you can reload faster! Large High Capacity Wind-up Magazine.High Capacity magazines have a loading door on the top. Simply pour in BBs until the compartment is full. On most magazines you should put at least 100 BBs in the magazine before you initially start to wind it or it will not be able to feed correctly. To wind the magazine turn the wheel on the bottom of the magazine. As you wind the magazine it will make a ticking noise. You will notice that BBs will feed up into the top of the magazine and are visible at the top. Keep winding until the ticking changes to a louder clicking noise which means the magazine is fully wound. Sometimes it is better to wind the magazine after you put it in the gun. If the BB release is bumped while you are putting the magazine into the gun the BBs can spray out and you will have to start all over again.

1911A1 S 8rd Blank Mag, Fits Colt & S&W Blank Pistols $16.79 8-rd mag Fits Colt Government 1911A1 S & S&W 1911 S blank guns Holds 9mm PAK blank ammo only Use only blank ammo Use only in the indicated blank-firing gun Will not accept live ammo rounds Will not properly feed any type of ammo in a firearm

Beeman 5039 1-Pc Adjustable Mount w/1" Rings, High, 9.5-11mm Dovetail $90.6 1" rings High profile Fits 9.5-11.5mm dovetail 4 hex screws/ring to secure scope Adjustable for windage & elevation Ideal for guns that need additional scope elevation The hex screws on the base let you adjust the base to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Beeman 5040 1-Pc Mount w/1" Rings, Medium, 9.5-11.5mm Dovetail $79.14 1" rings Medium profile Fits 11mm dovetail 4 hex screws/ring secure the scope Vertical scope stop pin (removable) Black matte finish Thehex screws on the base let you adjust the base to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

AirForce 1" Rings, High, 9.5-13.5mm Dovetail, See-Thru $24 1" rings High profile Fits 9.5 mm to 13mm dovetail See-thru mount Dual-position clamping system Threaded vertical recoil stop pin 4 hex screws/ring for securing scope Twice the clamping area of many conventional mounts Superior scope retention The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Leapers Accushot 1-Pc Bi-directional Offset Mount w/30mm Rings, High, 11mm Dovetail $16.79 1-piece bi-directional offset mount 30mm rings w/scope stop 11mm dovetail High profile 4 hex screws/ring 2 hex screws on base Mount in either direction 67mm integral base length 18mm wide 21mm saddle height Aircraft-grade aluminum Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers 30mm Rings, High, Weaver Mount, See-Thru $11.94 30mm rings Weaver mount High profile See-thru ring mount 4 hex screws/ring secure the scope 1 hex screw secures each ring to the gun Black matte finish Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers 30mm Rings, Medium, Weaver Mount, See-Thru $10.74 30mm rings Weaver mount Medium profile See-thru mount 4 hex screws/ring secure the scope 1 hex screw secures each ring to the gun Black matte finish Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1" Rings w/Deluxe Tactical Tri-Rail, 3/8" Dovetail $31.14 Fits 3/8" dovetail 1" rings Provides 3 Weaver/Picatinny rails for accessories 4 screws/ring secures the mount Optimized rail spacing for stable, adequate mounting Special tape inside the rings keeps your scope tight without excessive clamp pressure!

UTG 5 High Combat-Quality Foregrip, Aluminum, Matte Black $31.14 Leapers UTG 5 High foregrip Combat-quality Textured surface Weaver/Picatinny clamp-on mounting deck Tool-free, user-friendly installation Quick-detach locking nut is spring-tensioned Waterproof o-ring on end cap 2.7" interior storage space Anodized aircraft-grade aluminum Matte black finish 5" high 8.7 oz. This high-quality Leapers UTG foregrip will fit airguns, airsoft guns and firearms with a forward Weaver/Picatinny rail. A foregrip adds stability, which will deliver increased accuracy.

UTG 1" Rings, Low, Weaver/Picatinny, Quick Lock $15.54 1" rings Low profile Fits Weaver/Picatinny rail 4 screws per ring cap Quick lock Includes 3mm hex wrench Special tape inside the rings keeps your scope tight without excessive clamp pressure. Quickly attach/remove these rings from your gun…no tools required! Just twist the hand-tightened knob, and the ring is ready to come off (or go on). Buy a bunch of these, keep your scopes in rings and easily move them from one gun to another.

UTG 30mm Quick-Detach Max Strength Rings, Low, Weaver/Picatinny $19.14 30mm rings Low profile Fits Weaver/Picatinny rail 4 hex screws per ring secure your scope Quick-detach lever on each ring for quick attachment & removal Special tape inside the rings keeps your scope tight without excessive clamp pressure! Leapers UTG 30mm Quick-Detach rings can be quickly installed on or removed from your Weaver/Picatinny rail system. They feature 4-screw caps, low profile and are precision-machined from aircraft-grade aluminum alloy, but steel is used for all the bearing surfaces and the key. By creating an open cap top, the mounts are lighter than similar mounts with a closed cap.

UTG 30mm Quick-Detach Max Strength Rings, Medium, Weaver/Picatinny, See-Thru $21.54 30mm rings Medium profile Fits Weaver/Picatinny rail 6 hex screws per ring secure your scope Quick-detach lever on each ring for quick attachment & removal See-thru Special tape inside the rings keeps your scope tight without excessive clamp pressure! Aircraft-grade aluminum is just one of the things that makes this Leapers UTG scope mount different from all the others. The see-thru saddle plus the open architecture cap lightens the weight of the rings even more. One of the best features is the quick-detach lever lock on the side of each ring. Just pop the lever to remove your mount from a gun and simply push it back down to attach it to your gun.

Crosman Nitro Lubricating Oil for All Airsoft Guns, 57ml $5.63 Crosman Nitro Lubricating Oil reduces friction and prevents airsoft guns from jamming in the battlefield. This high grade silicone oil comes in a compact spray bottle container for easy application during intense skirmish situations. Maintain the reliability of your airsoft gun and order today! 57ml (1.93 fl oz) May increase or decrease muzzle velocity (varies by model) Can be used on new guns, but they may shoot slower for the first 100 Rds after use AEG & spring guns should be lubricated every 3,000 to 6,000 shots Gas guns should be lubricated every 1,000 to 3,000 shots Not recommended for use on o-ring and other plastic components We can not ship Crosman Nitro Lubricating Oil using air services. Please consider this when you choose a shipping method. Instructions: Remove magazine Spray a short burst down the barrel & through the feed tube in the magazine well Remove excess oil & wipe barrel with a swab

Yukon NVRS Tactical 2.5×50 Night Vision Rifle Scope, Weaver Mount $779.99 This is a Gen 1 NV scope and will not stand up to heavy-recoiling firearms or magnum spring-piston airguns. The Yukon NVRS Tactical Internal Focus 2.5×50 uses enhanced optics, a durable, titanium body and sleek design to separate itself from any other night vision riflescope. The NVRS Tactical 2.5×50 has internal focusing ability and an ergonomic design to allow for more comfort during shooting. It is also equipped with a powerful 50mm lens to provide higher resolution and light gathering capabilities, and flip-up lens covers open to reveal quality multicoated optics and an illuminated reticle. A built-in, powerful Pulse infrared illuminator is easily activated to enhance image brightness and increase range in total darkness; a precision windage and elevation adjustment and remote are additional features. The NVRS Tactical 2.5×50 is also digital camera adaptable with the digital camera accessory; other accessories include a laser pointer, AK adapter, IR flashlight and doubler lens, which are all sold separately. The NVRS Tactical 2.5×50 is backed by Yukon’s Limited Lifetime Warranty. Magnification: 2.5x Lens diameter: 50mm Field of view: 15 degrees Resolution, typical(lp/mm): 32-36 Focus range(yd): 1 to infinity Eye relief: 45mm Diopter adjustment: +4,-4 Detection range(yd): up to 230 Recognition range(yd): up to 120 IR illuminator effective distance(yd): up to 100 Reticle type: illuminated red-green duplex Reticle windage/elevation adjustment: 1/2 MOA per click Power supply; battery type feed voltage: (2) AA Estimated power life, w/out IR: up to 50 hours Operating temperature: -22 to +122 (f) Dimensions: 10.0" x 3.1" x 3.3" Weight: 33.5 oz Weaver mount