What fish go well with angelfish?

I'm wanting to the base of the community outside of my angel fish aquarium and was wondering what fish go well with them.

Docile fish that swim slowly. Now keep in mind that angelfish are not like ordinary fish (in the sense that it should be at 2.5 to 3 liters per inch angelfish) Treating fish that she can not fit in your mouth and swim slow enough to avoid creating a stressful environment. I hope this helps and good luck. PS As angelfish tend to occupy the middle of an aquarium, which means not spend much of their time sniffing around the bottom or surface areas, lower leaves and upper parts of the aquarium for other species. As for the addition of other species, consider finding the fish that use the top of the aquarium. The most popular choices for the surface of the fish species that inhabit them are the hatchetfish, Gasteropelecidae family. Unfortunately, there really are plenty of other options, because if you think about it, being a little fish in the Amazon, living on the surface can be dangerous – with big fish looking up and looking for fish-eating birds down. Pechito are able to make a living in the area, partly because they have evolved an effective response to escape – leaping into the air. I have to say at this point that despite a widespread belief that hatchetfish fly, do not. Simply propelled into the air and become passengers on a voyage covered by the initial path and the existing conditions in the wind. It is a great way to just disappear right in front of her attacker. Because Angelfishes are more predatory than most want to believe, I would suggest some of the larger, more robust species such as silver ax (Gasteropelecus sternicla) or platinum ax (Thoracocharax stellatus).

Ace of Base “Angel Eyes”

Kalashnikov Side Mount Scope Base, Weaver/Picatinny $21.54 Side mount scope base Fits AK-type rifles Weaver/Picatinny mounting rail This side mount scope base by Cybergun is precision machined to fit on AK 47 & AK 74 type airsoft rifles. Mount a scope, dot sight or laser sight of your choice and improve the accuracy of your rifle for intense airsoft skirmish scenarios. Mount a flashlight on this and shine the light on those you want to eliminate!

Air Venturi Scope Base, Weaver/Picatinny Rail, Fits IZH-46M $23.99 Weaver/Picatinny scope rail for IZH-46 2 Allen screws secure the base Easy installation

B-Square 17025 2-Pc 3/8" to Weaver Base $35.99 Bases are designed to adapt the original base system to allow mounting of Weaver-style rings.

B-Square Weaver Base, Fits RWS C225 Pistol $40.74 Weaver scope base Fits RWS C225 CO2 pistol Attaches with 1 hex screw (wrench included) Allows access to change rotary clip

KWA Magazine Base Lock Seal, Fits KWA Gas Blowback Airsoft Pistol Magazines $5.75 Magazine base lock seal Fits KWA gas blowback airsoft pistol magazines: M17/M18C/M19/M23F/M26C/M34

Walther Scope Base, Fits Lever Action CO2 Rifle, 11mm Dovetail & Weaver $35.99 Fits Walther Lever Action CO2 rifle Attach either Weaver mounts or 11mm dovetail rings to this base Ideal for attaching a scope or dot sight

UTG 30mm Max Strength Rings, Low, Weaver/Picatinny, See-Thru, Twist-Lock Base $17.94 30mm rings Low profile Fits Weaver/Picatinny rail 4 screws/ring cap secures your scope See-thru Black matte finish Twist-Lock base screw to rapidly mount and dismount These UTG rings make it easier to quickly mount and dismount your optical devices on different guns. Instead of working with several hex screws on each ring base, you just have to hand-tighten one twist-lock base screw on each ring and you’re good to go. Also, the weight has been reduced by channeling out the center of each cap. Use on any air gun, airsoft gun or firearm that has a Weaver or Picatinny rail. The cross-slots help stabilize the rings so your scope or dot sight is rock-solid.

UTG Scope Mount Base, Fits RWS Diana Rifles, Gamo Whisper & Others $21 Fits guns with the T05 trigger. In 2011, Diana introduced the T06 trigger and it also has a longer rail. This adapter does NOT fit the guns with a longer rail. Fits RWS Diana breakbarrel rifles that have no barrel droop Also fits Gamo rifles with a raised scope rail Attaches to rifle’s 11mm scope rail Special "recoil shock shoulder" stops scope shift–forever! Hide’s rifle’s 11mm scope rail; looks professional Scope base provides secure scope mounting with Weaver/Picatinny mounts 3 hex screws attach base to your Diana rifle Includes 2 hex wrenches Does not fit RWS Diana 46 or Schutze rifles

BKL 1-Pc Mount, 30mm Rings, 3/8" or 11mm Dovetail, 4" Long, 6 Base Screws, Silver $68.4 1-piece mount 30mm rings Fits 3/8" or 11mm dovetail 4" long 6 screws on base Strongest BKL mount Silver BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

WE 1911 Airsoft Gas Magazine w/flat base. $27.54 Never run out of ammo again! Magazine holds 15 rounds.

WE 1911 Airsoft Gas Magazine w/extended base. $23.99 Never run out of ammo again! Magazine holds 15 rounds.

UTG Scope Mount Base, Fits RWS Diana 34, 36, 38, & 45 with TO5 Trigger, Compensates for Droop & Stops Scope Shift $22.74 We strongly recommend that you use a 2-piece Weaver scope mount that has 4 screws on each ring cap.

UTG Scope Mount Base, Fits RWS Diana 48, 52, 54 & 460 Magnum with TO5 Trigger, Compensates for Droop & Stops Scope Shift $22.74 We strongly recommend that you use a 2-piece Weaver scope mount that has 4 screws on each ring cap.

BKL 1-Pc Mount, 30mm Rings, 3/8" or 11mm Dovetail, 4" Long, 6 Base Screws, Matte Black $68.4 1-piece mount 30mm rings Fits 3/8" or 11mm dovetail 4" long 6 screws on base Strongest BKL mount Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 1-Pc Mount, 4" Long, 1" Rings, 3/8" or 11mm Dovetail, 6 Base Screws, Matte Black $62.7 1-piece mount 1" rings 4" long Fits 3/8" or 11mm dovetail 6 screws on base Ideal for magnum airguns and semi-auto rimfire guns Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 1-Pc Mount, 4" Long, 1" Rings, 3/8" or 11mm Dovetail, 6 Base Screws, Silver $62.7 1-piece mount 1" rings 4" long Fits 3/8" or 11mm dovetail 6 screws on base Ideal for magnum airguns and semi-auto rimfire guns Silver BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 1-Pc Mount, 4" Long, 1" Rings, 3/8" or 11mm Dovetail, 6 Base Screws, High, Matte Black $62.7 1-piece mount 1" rings 4" long High mount Fits 3/8" or 11mm dovetail 6 screws on base Ideal for magnum airguns and semi-auto rimfire guns Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

Diana RWS 48 Striker Combo, T05 Trigger $599.94 3-9x32AO Scope & No-Droop Base

Diana RWS 48 Striker Combo, T06 Trigger $599.94 3-9x32AO Scope & No-Droop Base

B-Square 17021 11mm-to-Weaver Adapter, Adjustable $65.94 11mm to Weaver base, adjustable

BKL 1-Pc Mount, 4" Long, 1" Rings, 3/8" or 11mm Dovetail, 6 Base Screws, .007 Drop Compensation, Matte Black $68.4 1-piece mount 1" rings 4" long Fits 3/8" or 11mm dovetail 6 screws on base .007" drop compensation Ideal for magnum airguns and semi-auto rimfire guns Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

Leapers Accushot 1-Pc Offset Mount w/1" Rings, Weaver/Picatinny Mount $14.39 1" rings Fits Weaver/Picatinny base 62mm base length 0.71" saddle height 38mm bi-directional offset for extended eye relief See-thru base

Cybergun Weaver/Picatinny Mount, Fits FAMAS AEG Machine Gun $13.14 Weaver optics base with Picatinny slots Fits FAMAS AEG machine gun (CG400902)

UTG 11mm-to-Weaver Adapter, Vertical Scope Stop Pin $11.99 Base attaches to 11mm dovetail, top is a Weaver/Picatinny scope rail 3.94" long 9 slots for easy adjustments 2 hex screws attach 11mm dovetail to your gun’s 11mm scope base Incl. vertical scope stop pin

Leapers Accushot 1-Pc Bi-directional Offset Mount w/1" Rings, High, 11mm Dovetail $15.54 1-piece bi-directional offset mount 1" rings w/scope stop 11mm dovetail High profile 4 hex screws/ring 2 hex screws on base Mount in either direction 62mm integral base length 18mm wide 21mm saddle height Aircraft-grade aluminum

Beeman 5036 1-Pc Mount w/1" Rings, High, 9.5-11.5mm Dovetail $79.14 1" rings High profile Fits 9.5-11.5mm dovetail 4 hex screws/ring secure the scope The hex screws on the base let you adjust the base to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

WE 50rd Hi Cap Long Green Gas Magazine $45 TSD/WE 50rd Hi Cap magazine for Hi-Capa 5.1, long magazine base, may be used for 4.3 & 3.8 Hi-Capa.

Gamo 1-Pc Mount w/1" Rings, 3/8" Dovetail $23.99 1" rings Fits 3/8" dovetail 4 screws/ring cap secure the scope 3 hex screws secure the base to the gun rail

BKL 2-Pc 3/8" or 11mm Dovetail to Weaver Adapter, 1" Long, Matte Black $34.2 3/8" or 11mm dovetail to Weaver adapter (rail accepts Weaver rings) 1" long 2 screws per base Matte black

30mm Quick-Detach Rings, High, Weaver/Picatinny, See-Thru, Compact, Law-Enforcement Grade $23.96 30mm rings High profile Fits Weaver/Picatinny rail 4 hex screws/ring to secure scope Quick-detach base See-thru Law-enforcement grade

30mm Quick-Detach Rings, Medium, Weaver/Picatinny, See-Thru, Compact, Law-Enforcement Grade $23.96 30mm rings Medium profile Fits Weaver/Picatinny rail 4 hex screws/ring to secure scope Quick-detach base See-thru Law-enforcement grade

Front Sight, Fits Walther Lever Action Rifle $5.99 Front sight Fits Walther Lever Action CO2 rifle 1/2"L x 1/4"W x 1/4"H (including base)

BKL 1" Rings, 3/8" or 11mm Dovetail, Double Strap, Silver $43.2 1" rings Fits 3/8" or 11mm dovetail Double strap (4 screws per cap, instead of 2; 2 screws per base, instead of 1) Silver

1" Quick-Detach Rings, High, Weaver/Picatinny, See-Thru, Law-Enforcement Grade $23.96 1" rings High profile Fits Weaver/Picatinny rail 6 hex screws/ring cap secures the scope Quick-detach base See-thru Law-enforcement grade

1" Quick-Detach Rings, Medium, Weaver/Picatinny, See-Thru, Law-Enforcement Grade $23.96 1" rings Medium profile Fits Weaver/Picatinny rail 4 hex screws/ring secure optics Quick-detach base See-thru Law-enforcement grade

BKL 30mm Rings, 3/8" or 11mm Dovetail, Double Strap, Matte Black $68.4 30mm rings Fits 3/8" or 11mm dovetail Double strap (4 screws per cap, instead of 2; 2 screws per base, instead of 1) Matte black

BKL 30mm Rings, 3/8" or 11mm Dovetail, Double Strap, Offset, Matte Black $79.8 30mm rings Fits 3/8" or 11mm dovetail Offset mount for additional eye relief Double strap (4 screws per cap, instead of 2; 2 screws per base, instead of 1) Matte black

BKL 30mm Rings, 3/8" or 11mm Dovetail, Double Strap, Offset, Silver $79.8 30mm rings Fits 3/8" or 11mm dovetail Offset mount for additional eye relief Double strap (4 screws per cap, instead of 2; 2 screws per base, instead of 1) Silver

BKL 30mm Rings, 3/8" or 11mm Dovetail, Double Strap, Silver $68.4 30mm rings Fits 3/8" or 11mm dovetail Double strap (4 screws per cap, instead of 2; 2 screws per base, instead of 1) Silver

BKL 1" Rings, 14mm Dovetail, Double Strap, Matte Black $43.8 1" rings Fits 14mm dovetail Double strap (4 screws per cap, instead of 2; 2 screws per base, instead of 1) Matte black

BKL 1" Rings, 3/8" or 11mm Dovetail, Double Strap, High, Matte Black $45 1" rings Fits 3/8" or 11mm dovetail Double strap (4 screws per cap, instead of 2; 2 screws per base, instead of 1) High mount Matte black

BKL 1" Rings, 3/8" or 11mm Dovetail, Double Strap, Offset, Silver $62.7 1" rings Fits 3/8" or 11mm dovetail Offset mount for additional eye relief Double strap (4 screws per cap, instead of 2; 2 screws per base, instead of 1) Silver

BKL 1" Rings, 3/8" or 11mm Dovetail, Double Strap, Matte Black $43.2 1" rings Fits 3/8" or 11mm dovetail Double strap (4 screws per cap, instead of 2; 2 screws per base, instead of 1) Matte black

Leapers Accushot 1-Pc Bi-directional Offset Mount w/30mm Rings, High, 11mm Dovetail $16.79 1-piece bi-directional offset mount 30mm rings w/scope stop 11mm dovetail High profile 4 hex screws/ring 2 hex screws on base Mount in either direction 67mm integral base length 18mm wide 21mm saddle height Aircraft-grade aluminum Special tape inside the rings keeps your scope tight without excessive clamp pressure!

CenterPoint 1-Pc Mount, 1" Rings, Medium, 3/8" Dovetail, 4 Screws/Cap $14.34 1" rings 1-pc mount Medium profile Fits 3/8" dovetail 4 screws/ring cap 3 hex screws secure the base This 1-pc mount will secure your scope firmly to your gun. The mount fits a 3/8" dovetail and has 3 hex screws on the base. Each ring has 4 hex screws per cap.

Tech Force 1-Pc Mount, 1" Rings, 11mm Dovetail, See-Thru $15.54 1" rings Medium profile Fits 11mm dovetail See-thru base 4 hex screws/ring secure the scope Includes 2 hex wrenches The Tech Force mount is an economical one that will work on any gun that has an 11mm base or dovetail. Since it has 4 screws per cap, it’ll hold your scope tight, even on magnum spring air rifles.

Beeman 5039 1-Pc Adjustable Mount w/1" Rings, High, 9.5-11mm Dovetail $90.6 1" rings High profile Fits 9.5-11.5mm dovetail 4 hex screws/ring to secure scope Adjustable for windage & elevation Ideal for guns that need additional scope elevation The hex screws on the base let you adjust the base to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Beeman 5040 1-Pc Mount w/1" Rings, Medium, 9.5-11.5mm Dovetail $79.14 1" rings Medium profile Fits 11mm dovetail 4 hex screws/ring secure the scope Vertical scope stop pin (removable) Black matte finish Thehex screws on the base let you adjust the base to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

CenterPoint 1-Pc Off-Set Mount, 1" Rings, High, 3/8" Dovetail, 4 Screws/Cap $15.54 1" rings 1-pc off-set mount High profile Fits 3/8" dovetail 4 screws/ring cap 2 hex screws secure the base Attach a scope to your favorite airgun, airsoft gun or rimfire with this 1-pc off-set mount. The mount fits a 3/8" dovetail and has 2 hex screws on the base. The rings have 4 hex screws per cap that hold your scope solidly in place.

Hawke 1" Rings, Weaver, Low, Black $15.59 1" rings Low profile Fits Weaver/Picatinny rail 4 screws per screw cap, 1 screw per base Special tape inside the rings keeps your scope tight without excessive clamp pressure!

AirForce 1" Rings, Medium, 9.5-13.5mm Dovetail $24 1" rings Medium profile Fits 9.5 mm-13mm dovetails 4 hex screws/ring to secure the scope Vertical scope stop The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Leapers Accushot 1-Pc Mount w/1" Rings, 3/8" Dovetail $17.94 1" rings Medium profile Fits 3/8" dovetail 100mm base length 4 hex screws/ring secure the scope Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Mount w/1" Rings, High, 11mm Dovetail $21.54 1" rings High profile Fits 11mm dovetail 4 hex screws/ring secure the scope 100mm base length 80mm between rings Vertical stop pin Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Mount w/30mm Rings, High, 11mm Dovetail $17.94 Limited Lifetime Warranty 30mm rings High profile Fits 11mm dovetail 4 hex screws/ring secure scope 100mm base length Vertical stop pinSpecial tape inside the rings keeps your scope tight without excessive clamp pressure!

Leapers Accushot 1-Pc Mount w/30mm Rings, Medium, 3/8" Dovetail $17.34 30mm rings Medium profile Fits 3/8" dovetail 100mm base length 3 hex screws/ring secure the scope Vertical stop pin Limited lifetime warranty Special tape inside the rings keeps your scope tight without excessive clamp pressure!

RWS Lock Down 1-Pc Mount w/1" Rings, 11mm Dovetail, Barrel Droop Compensation $33.54 1" rings Fits 11mm dovetail 2 hex screws per ring 4 hex screws secure base to scope rail 2 recoil stop pins .025" elevation compensates for barrel droop Made of aircraft-grade aluminum Includes hex wrench Black matte

RWS Lock Down 1-Pc Mount w/30mm Rings, 11mm Dovetail, Barrel Droop Compensation $33.54 30mm rings Fits 11mm dovetail 2 hex screws per ring 4 hex screws secure base to scope rail 2 recoil stop pins .025" elevation compensates for barrel droop Made of aircraft-grade aluminum Includes hex wrench Black matte

UTG Drooper Scope Rail, 11mm-to-Weaver Adapter, Compensates for Droop & Stops Scope Shift $22.74 UTG DNT06 scope mount base Attaches to rifle’s 11mm scope rail Fits any rifle with an 11mm scope base…either dovetail grooves or a raised rail Decreases barrel droop with 10" upward compensation at 30 yds Stops scope shift–forever! Scope base provides a secure foundation for Weaver/Picatinny mounts 4 hex screws firmly attach base to your Diana rifle Dual scope-stop holes to stop movement 0.68" saddle height 0.78" total height 1" wide 4.72" long 11 slots to accommodate various eye relief adjustments 3.8 oz. Aircraft-grade aluminum Includes 2 hex wrenches, hex screw and set screw Barrel droop is a common issue in some air guns, but it can make it difficult to use a scope. To get the most accuracy from your air rifle, mount a scope, but don’t put it directly on the airgun’s original rail. Instead, mount this great adapter, which offers 10" of upward compensation (at 30 yds.), and then mount your scope. You’ll wonder how you ever got along without it!

UTG M16 Tactical Mount, Attach to Carry Handle $8.99 Limited Lifetime Warranty M16 Weaver mount attaches to carry handle 1-piece see-thru base 11 slots for rings Black anodized aluminum Fits AR/M16 rifles, including: Tokyo Marui M4A1 Tokyo Marui M16A2 Olympic Arms Car-97 M44 Olympic Arms PCR-4 HFC XM-177 DPMS A-15

Beeman 5030H 1" Rings, High, 9.5-11.5mm Dovetail $45.54 1" rings High profile Fits 9.5-11.5mm dovetail 4 hex screws/ring secure the scope Vertical scope stop pin (removable) The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Beeman 5030M 1" Rings, Medium, 9.5-11.5mm Dovetail $45.54 1" rings Medium profile Fits 9.5-11.5mm dovetail 4 hex screws/ring secure the scope Vertical scope stop pin (removable) The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Beeman 5031 30mm Rings, High, 9.5-11.5mm Dovetail $69.54 30mm rings High profile Fits 9.5-11.5mm dovetail 4 hex screws/ring to secure scope Vertical scope stop pin (removable) The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

BKL 1" Rings, 3/8" or 11mm Dovetail, Double Strap, Offset, Matte Black $62.7 1" rings Fits 3/8" or 11mm dovetail Offset mount for additional eye relief Double strap (4 screws per cap, instead of 2; 2 screws per base, instead of 1) Matte black

TSD Competition Grade 6mm biodegradable airsoft BBs, 0.20g, 5000 rds, white $23.94 180 Day Bio-degradable competition grade BBs 6mm 0.20g 5,000 rds Egg shell white Long shelf life Made in Taiwan Feeder bottle 100% organic base Condition required for break-down: soil, sun-light, & water

MTM Case-Gard Site-N-Clean Rest & Carry Case $73.73 Site-N-Clean rest Carry case with handle & room for storage 2 rubber-padded forks Rear fork is removable Forks are adjusted & held in place by using 2 of the 4 slots in the base Rear adjustment knob allows for precise horizontal positioning Ideal for sighting-in air rifles or as a gun maintenance rest 11"x20"x4" closed MADE IN USA If you’d like an all-in-one unit that you can use for cleaning, maintaining and sighting-in your air rifles, the Site-N-Clean rest will do all tasks well. The wide base of the case stabilizes the rest. Take it to the range, sight-in your gun and then use it for any maintenance or cleaning you have to perform. Can also be used with firearms and airsoft guns. The handy case has room to store your oils, lubes, and cleaning gear and tools. Put a padlock on the case to prevent others for accessing the case’s contents.

AirForce Adaptive Rear Target Sight, Fits Most 10-Meter 3-Position Rifles & All AirForce Guns $164.34 Adaptive rear target sight Fits most 10-meter 3-position rifles & all AirForce guns Large amount of vertical adjustment Fits 11mm airgun rail Has 1/8 MOA click adjustment knobs & can be reset to zero Can be removed from its mounting base & clamped into a 1" scope ring Made in America

Leapers Accushot Competition Auto-Reset Target $17.94 Large Mechanical Auto-Reset Target with Premium Box Packaging Three differently sized bullseye targets Solid Base Tray with Mesh Net to Collect BBs Standing Tray to Collect BBs Easy Score Wide Dimension for Multiple Players Auto-Reset When the Smallest Target Gets Hit No Battery Needed 15"Wx9"Hx8"D

Leapers Accushot 1" Rings, High, 9.5-11.5mm Dovetail $11.99 1" rings High profile Fits 9.5mm to 11.5mm dovetail Vertical stop pin The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths. Special tape inside the rings keeps your scope tight without excessive clamp pressure!

UTG Weaver/Picatinny Riser Mount, Medium Profile, 0.83" High, 13 Slots $11.94 Medium-profile riser mount Fit guns with Weaver/Picatinny rail Meets STANAG specs 2 thumb nuts & locking plate for easy installation Aircraft-grade aluminum Matte black See-thru base 0.83" saddle height 13 Picatinny slots 6.1 oz 5.7" long 1.75" wide 1" high

Champion Club Deluxe Off-Hand Shooting Stand, Finale Match Pellet Holder $95.99 Club off-hand shooting stand Steel construction Adjustable tripod base with rubber feet Rod extends up to 54" Includes position master and flat platform rest to secure your gun Includes .177 Finale Match pellet holder Rod collapses to a compact 27" for convenient storage 6 lbs. If you shoot 10-meter air rifle, you’ll appreciate the convenience of this shooting stand. This lets you concentrate on your targets and helps develop better shooting skills.

BKL 1-Pc Mount, 1" Rings, 14mm Dovetail, Matte Black $65.4 1-piece mount 1" rings 4" long Fits 14mm dovetail 6 screws on base Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

Hill Hand Pump Micron Filter Replacement $9.59 Micron filter replacement Fits all Hill hand pumps Easy to replace Instructions: Unscrew the hexagonal connector on top of the base housing (to remove pump) Remove the filter from its seat in the bottom of the housing Place the replacement filter into the housing Replace the o-ring, if needed Reattach the pump and tighten the hexagonal connector Maintain your Hill hand pump, and it’ll always be reliable. Replacing the filter is essential for proper functioning of the pump.

AirForce 1" Rings, High, 9.5-13.5mm Dovetail, See-Thru $24 1" rings High profile Fits 9.5 mm to 13mm dovetail See-thru mount Dual-position clamping system Threaded vertical recoil stop pin 4 hex screws/ring for securing scope Twice the clamping area of many conventional mounts Superior scope retention The 2 hex screws on the base let you adjust the rings to fit the different width rails found on airguns. The clamp is made to securely fit a range of dovetail widths.

Centerpoint 1" Weaver/Picatinny Rings, Medium $15.54 1" Weaver/Picatinny rings Medium profile 4 hex screws per ring Mount a scope on your favorite airgun, airsoft gun or firearm with these 1" CenterPoint Weaver/Picatinny rings! Each ring has 4 hex screws that hold your scope firmly in place while you shoot. The base of each ring attaches to any Weaver/Picatinny rail equipped gun with a single large screw. Pick these rings up today!

CenterPoint 1-Pc Mount, 1" Rings, High, 3/8" Dovetail, 4 Screws/Cap $14.34 1" rings 1-pc mount High profile Fits 3/8" dovetail 4 screws/ring cap 3 hex screws secure the base Whether you hunt, target shoot or casually plink in your backyard, this 1-pc mount will secure your scope firmly to your gun. The mount fits a 3/8" dovetail with 3 hex screws. The rings have 4 hex screws per cap.

Crosman B272 4-Pc Intermount, 3/8" Dovetail $17.94 Attaches to the barrel & provides a 3/8" dovetail Includes 1 set, which is 2 bases (each base has 2 sides that are screwed together) Black matte finish Fits current production Benjamin & Sheridan airguns Mounts so far forward that you’ll have to use a pistol scope to get the right eye relief. Do not grab any part of the scope when pumping your gun!

Gamo 1" Rings, High, 3/8" & 11mm Dovetail, See-Thru $17.94 1" rings High profile 3/8" & 11mm dovetail See-thru mount Black matte finish The screw on the base lets you adjust the rings to fit 3/8" & 11mm dovetails. The clamp is made to securely fit a range of dovetail widths. Special tape inside the rings keeps your scope tight without excessive clamp pressure!

Jackson Safety Olympic Clear Lens Shooting Glasses/+1.5 Power $12.77 Stylish ergonomic GS7 nylon frame combines with sleek 7 base polycarbonate lenses for the ultimate in protection and style.Soft rubber nose pad with self-adjusting fingers for all day comfortExceeds ANSI Z87.1 2003 High Velocity Industrial Protection Standards Maximum ultraviolet protection up to 400 nanometersAvailable in clear with black frame. Magnification insert is molded into the lens. Polycarbonate safety glasses protect your eyes from impact, but the glasses deteriorate due to scratches, light, etc., and should be replaced after 2 years.

Jackson Safety Olympic Clear Lens Shooting Glasses/+2.5 Power $12.77 Stylish ergonomic GS7 nylon frame combines with sleek 7 base polycarbonate lenses for the ultimate in protection and style.Soft rubber nose pad with self-adjusting fingers for all day comfortExceeds ANSI Z87.1 2003 High Velocity Industrial Protection Standards Maximum ultraviolet protection up to 400 nanometersAvailable in clear with black frame. Magnification insert is molded into the lens. Polycarbonate safety glasses protect your eyes from impact, but the glasses deteriorate due to scratches, light, etc., and should be replaced after 2 years.

Benjamin Nosler Ballistic Tip eXTREME Air Rifle Bullet, .357 Cal., 145 Grains, Round Nose, 25ct $23.94 .357 cal. 145 grains Round nose Polymer ballistic tip Stepped driving bands Hollow base 25 bullets Developed for the Benjamin Rogue ePCP air rifle, these Nosler bullets will find their way to your target and help you achieve maximum accuracy. Nosler is known for making some of the best bullets in the business, and the Benjamin Ballistic Tip eXTREME air rifle bullet is no exception. If you value hitting your target, this is the way to go!

BKL 3/8" or 11mm Dovetail to Weaver Adapter, 4" Long, Matte Black $51.3 3/8" or 11mm dovetail to Weaver adapter (rail accepts Weaver mounts) 4" long 6 screws on base Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

BKL 3/8" or 11mm Dovetail to Weaver Cantilever Adapter, 4" Long, Matte Black $45.6 3/8" or 11mm dovetail to Weaver adapter (rail accepts Weaver mounts) 4" long 2 screws in base Ideal for dot sights Matte black BKL mounts have the unique ability to flex, giving them superior gripping power! Your mount may look like it’s bending, but it’s supposed to do that…it’s grabbing and tightly holding your optics on your gun. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

G&G Armament Red Dot Sight, Weaver/Picatinny Mount $107.99 Red dot sight Incl. additional 3/8" Weaver/Picatinny mount & cleaning cloth Use this G&G Armament red dot sight to enhance the accuracy of your favorite firearm, airgun or airsoft gun. Simply unscrew the two large base screws to attach the red dot sight on your gun’s tactical rail.

Walther Shot Dot Sight, Adj Windage/Elevation, Weaver Mount $23.99 Intended for airsoft pistols & air pistols. Walther Shot Dot 10 MOA green dot 2 brightness settings 24mm objective lens Coated lens Parallax-free @ 10m Adjustable for windage & elevation Weaver mount Uses one hex screw to attach to gun’s base 3"Lx1.22"Wx1.57"H 1.38 oz. Includes 3V CR2032 battery, hex wrench & instruction/mounting manual

JBU Fake Airsoft Suppressor, 6.75", Aluminum, Incl. Barrel Extension $71.99 JBU (MSS) modular supressor system Aluminum alloy material 14mm counterclockwise thread 5-pc set Unique JBU serial number 6.75"x1.5" This high-quality modular suppressor system by JBU will enhance the look of your airsoft gun. The modular suppressor system is made of aluminum alloy material for extra durability. The 5-piece set includes a barrel cap, forward extender, base extender, flash hider & adapter. Does not suppress the sound/noise of your gun. For airsoft use only.

AirForce Adaptive Target Sight Set, Fits Most 10-Meter 3-Position Rifles & All AirForce Guns $205.2 Adaptive target sight set (front & rear sights included) Fits most 10-meter 3-position rifles & All AirForce guns Front sight accepts standard European aperture inserts (not included) Both sights have large amount of vertical adjustment Rear sight fits 11mm airgun rail Rear sight has 1/8 MOA click adjustment knobs & can be reset to zero Rear sight can be removed from its mounting base & clamped into a 1" scope ring Made in America

B-Square 17401 Interlock Adjustable AA 1-Pc Mount w/1" Rings, 11.7mm Dovetail, Fits Webley Patriot $69.54 Specially designed with 2 crossbars to fit the grooves of Webley rifles, including the Patriot. 1" rings Fits 11.7mm dovetail on the Webley Patriot Extra-long base Windage/elevation adjustments 4 hex screws/ring secure the scope Vertical stop pin Gimbel action eliminates scope stress Black matte finish

TSD Competition Grade 6mm biodegradable airsoft BBs, 0.20g, 1000 rds, white $7.86 180 Day Bio-degradable competition grade BBs packaged in a 1,000 round feeder bottle. Made in Taiwan Size: 6mm Weight: 0.20g Quantity: 1,000 Color: Egg Shell White Long Shelf Life 100% Organic Base Condition Required for Break-Down: Soil, Sun-light, & Water BBs will break down in 180-days when exposed the 3 elements.

Jackson Safety Olympic Clear Lens Shooting Glasses/+2.0 Power $12.77 Stylish ergonomic GS7 nylon frame combines with sleek 7 base polycarbonate lenses for the ultimate in protection and style. Soft rubber nose pad with self-adjusting fingers for all day comfort Exceeds ANSI Z87.1 2003 High Velocity Industrial Protection Standards Maximum ultraviolet protection up to 400 nanometers Available in clear with black frame. Magnification insert is molded into the lens. Polycarbonate safety glasses protect your eyes from impact, but the glasses deteriorate due to scratches, light, etc., and should be replaced after 2 years.

MTM Case-Gard Pistol Rest $26.34 Pistol rest Red base locks into the forked rest in 20 positions Accommodates almost any size pistol…small, medium or large frame Forked rest easily detaches and snaps into the bottom of the rest for convenient storage Padded forked rest won’t mar the finish of your gun Can be used with or without a sandbag Polypropylene 5-year manufacturer warranty Made in USA It can be difficult to hold a handgun steady…especially if it’s a big or heavy gun. The MTM Case-Gard pistol rest will help you steady your grip and get on target. It’s lightweight, quick to assemble and easy to use with any air pistol or firearm handgun.

NcStar 1×30 Red/Green Dot Sight, 1 MOA, 30mm Tube, Weaver/Picatinny Cantilever Mount $44.34 Red/green dot sight 1x magnification 30mm objective lens diameter 1 MOA (1" click value @ 100 yds) 3 MOA dot size Unlimited eye relief 11.3 oz. 4.35" long Incl. Weaver/Picatinny cantilever mount & flip-open lens caps Other features: Rheostat with 5 brightness settings for each dot color Black anodized aluminum construction The mount on this NcStar dot sight is 3 inches high. It quickly mounts and unmounts with one knurled knob on the base. The single ring has 4 cap screws to secure the sight. Use on air guns, airsoft guns and firearms.

AirForce Self-Centering Tri-Rail, 11mm Dovetail $36 Self-centering Tri-rail base 11mm dovetail for mounting optics Mounting surfaces on 3 sides 6 hex screws secure the rail For AirForce Airguns Condor, Talon & Talon SS air rifles & TalonP air pistol Full-length clamping guarantees a rock-solid foundation for your airgun accessories. Made for AirForce sporting air rifles and the TalonP air pistol, the Tri-rail lets you load up your air gun with lots of accessories that make hunting and shooting a lot more fun…and also increases accuracy.

King Arms Green Gas, 8 oz., 12ct $131.94 King Arms green gas For use with all green gas airsoft guns For airsoft use only 12 canisters per box 8 oz. Enjoy crisp blowback recoil with every shot with King Arms green gas. Green gas lets your airsoft gun fire smoothly during intense airsoft skirmishes. Simply hold the canister upside down and match the nozzle with the magazine port to use. Fill the magazine in short spurts for best results.$28 HazMat fee included in price. Ground shipping only. ATTENTION: The nozzle of this green gas canister is NOT compatible with the extended base magazine fill ports on the WE Full Metal 1911 MEU (WE-052a) & WE Full Metal 1911 MEU w/ Rail (WE-052b) green gas pistols.

AirForce 11mm-to-Weaver Adapter $39.9 11mm (or 3/8") dovetail-to-Weaver/Picatinny adapter 3.04" clamping & mounting length .69" high 4.12" overall length 4 hex screws secure the base Includes a hex wrench Use on AirForce rifles and pistols or any other airgun or rimfire that has a 3/8" or 11mm dovetail. Weaver/Picatinny scope bases offer a much tighter grip on your scope mounts. This would be an especially good addition to any hard-recoiling spring-piston rifle. The cross slots deliver extra gripping area for the rings, making it almost impossible for the scope mount to shift. You may need to buy two of these adapters, depending on the length of the scope mount you’re using and on the length of the scope rail to which you’re attaching this adapter.

BSA 42mm Red Dot Sight, 5 MOA, 11-Position Rheostat, 3/8" & Weaver Mounts $59.94 BSA red dot sight 42mm objective lens 11-position rheostat Integral 3/8" & Weaver mounts* 50 yds fixed parallax 77 yds field of view @ 100 yds 5 MOA 45 MOA max adjustment range in both directions 7 oz. 3.80" long Black matte finish Includes elastic lens covers 1-year limited warranty *Packaging says it has a 5/8" mount–this refers to a Weaver base Compact, lightweight red dot sight that’ll fit Weaver or 3/8" dovetails (also 11mm dovetails). Perfect for centerfire guns, rimfires, air guns and airsoft guns.

BKL 1-Pc Adjustable Scope Mount, 1" Rings, 3/8" Dovetail, Black $79.8 1-pc scope mount 3/8" dovetail Low profile 1" rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8" side rails for mounting other accessories 2.5" of clamping length 4" overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz. 6 base screws Matte black Includes 3 hex wrenches Got barrel droop? This new mount will help you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails offer more space to add a laser and a flashlight to augment a scope.

BKL 1-Pc Adjustable Scope Mount, 30mm Rings, 3/8" Dovetail, Black $79.8 1-pc scope mount 3/8" dovetail Low profile 30mm rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8" side rails for mounting other accessories 2.5" of clamping length 4" overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz. 6 base screws Matte black Includes 3 hex wrenches Got barrel droop? This BKL Tech mount lets you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails give you room to mount a laser and flashlight.

Leapers Golden Image 4X32AO Rifle Scope, Mil-Dot Reticle, 1" Tube, Weaver Rings $47.99 True Strength Revolutionary Triple S Structure (Smart Spherical Structure) for the most effective telescopic functions Rifle scope Full size, adjustable objective scope, from 7.5 yards up 5th Gen square knob housing and finger adjustment knobs Mil-dot range estimating reticle Complete with flip-open lens caps, 2" sun shade and RGWM-25L2 AccuShot tactical rings SpecificationsMagnification: 4XTube Dia.: 1"Objective Dia.: 32 mmField of View @100 yards: 34′Eye Relief: 3.5"Exit Pupil: 8.0 mmClick Value@100 yards: 1/4"Length: 11.8"Weight: 12.9ozParallax Setting: 7.5 yds – infinity The rings have 2 screws per cap. Please Note: The mounts that are included are Weaver mounts, intended for airsoft gun mounting. If you wish to mount this scope on a 3/8 (11mm) Dovetail base, you will need different mounts. We recommend the following: Accushot Medium Profile Airgun Rings Accushot Medium Profile Full Length Integral Mount Weaver intermount for Benjamin Sheridan rifles

UTG 3/8" Dovetail-to-Weaver/Picatinny Rail Adapter, 2pcs $8.39 3/8" & 11mm dovetail-to-Weaver/Picatinny rail adapter Fits 3/8" and 11mm dovetails on airguns and rimfire guns 1" long .93" wide .24" high .18 oz 2 adapters If your air gun or rimfire gun has a scope dovetail that measures either 11mm or 3/8" (approx. 9.5mm), you can use this lightweight aluminum adapter to attach your Weaver and Picatinny mounts to your smaller 11mm and 3/8" dovetails. This clever device clips into the base of your Weaver or Picatinny mount (both 1-pc mounts and 2-pc mounts), thereby reducing the size of the clamping jaws on the mount! A very easy way to make your mounts more useful for a wider range of guns. In fact, you can leave your optics in the mounts and move them from gun to gun! You’ll still have to resight the gun after attaching the scope, but you won’t have to reset or retighten the scope in the mount.

Pellet Holster, Attaches to Belt, Foam-Lined Pellet Tin, 4 Paper Labels $8.34 Air Venturi pellet holster Ideal for airgun pellets but can also hold steel BBs, airsoft BBs & firearm cartridges (smaller calibers) Stickers for the lid identify what’s inside Foam in lid & base secures ammo Slips into holster, which attaches to waistband or belt Includes black plastic pellet holder w/foam inserts, holster w/clip & 4 self-adhesive paper labels Holds up to 200 pellets or up to 50 .22LR cartridges Don’t take your rattling pellet tins when you go hunting. Take this silent pellet holster instead. The foam prevents your ammo from rattling around so it doesn’t spook your quarry. That also helps protect the skirts from damage. The lid presses on…no cross-threading issues when you’re in a hurry to reload. The holster’s clip slips over your belt. No belt? You can also slip it over a sturdy waistband or thick coat pocket.