Preparing a beer kit

Most home brewers begin brewing beerkits. This is the easiest way to develop your own beer and learn the basic procedures involved. The quality of beer products from a beer kit largely depends on the manufacturer, mainly obtained what you pay.
With regard to articles and additional information about this topic please visit www.thehomebrewcompany.ie

Brewing Equipment Required

Fermentation vessel 25 liters
Thermometer
Plastic air bag
Rubber stopper
Test Jar
Bottle Filling Stick
Hydrometer
Bottle brush
Simple Syphon
Plastic Beer Paddle
Double Lever Capper
Golden Crown Caps
Bruclean Cleaner / Sterilizer
Bottles: If you are bottling beer bottles should be sterilized just before bottling. It is recommended to be soaked in sterilizing agent for at least 20 minutes, rinse 5 times each and allowed to drain.
CLEANING / Spay / RINSE
Any piece of equipment that comes into contact with the beer must be thoroughly cleaned, sterilized and washed.
Cleaning
All equipment should be rinsed thoroughly after cleaning to remove traces of detergent. Traces of detergent in the finished beer will affect the surface tension and result in the retention of the head of the poor (ie, a flat paint, unattractive!).
Sterilization
Your beer will be very susceptible to bacterial or yeast infection in the first steps in the brewing. An environment sterile it is necessary to produce a clean tasting beer healthy. Sterilization of your brewing equipment should be made as close as preparation time possible.
Bruclean Cleaner / Steriliser 400g
He has provided the above sterilization agent. Bruclean Brupaks can be used as a hot solution or cold. For general cleaning, mix 5 to 10 grams per liter of water Bruclean hot or cold.
Rinse
The importance of rinsing your preparedness kit sterilized can not be stressed enough. The residues of the sanitizing solution finding its way into the beer can give a TCP taste to your beer, in some cases takes its beer undrinkable.
Now that you have cleaned, sterilized and clarified his team is ready to start the preparation.
HOW TO MAKE YOUR BEER KIT
STEP 1
Re-hydrate the yeast.
For healthy fermentation it is necessary to re-hydrate your yeast before adding it to the wort (wort is the name given to beer before fermentation takes place.) You will need to boil 100 ml of water and add it to a pitcher or large glass. Cover this with foil or a sterilized plate etc. Allow this water to cool to about 30-35 degrees celcius. Open the envelope of dry yeast and sprinkle evenly over the surface of water. Do not stir or mix. Cover the jar again and let the yeast to rehydrate for 20-30 minutes.
STEP 2
Remove the labels of canned beer kit (s) and place them in a pot of boiling water for 10 minutes to soften the extract. Open cans with a can opener and pour into sterilized fermenter. Add approximately 2 liters of boiling water to the fermenter. We recommend that you first pour the boiling water in the cans to rinse any remaining extract and then add to your fermenter.
STEP 3
Once you've added boiling water to the fermenter take shovel and remove the grass to mix well with the boiling water. The next top fermenter with cool water until the desired or recommended level. This is usually 23 liters.
STEP 4
Now we have to aerate the wine. Aerate the wort is necessary to introduce oxygen which will help the yeast get off to a good start and produce a fermentation healthy, in turn, produce a great beer. We recommend that you shake vigorously with the paddle for 5 to 10 minutes.
STEP 5
Next you should take a gravity reading with your hydrometer. Taking a reading density before and after fermentation will allow you to calculate the alcohol content of beer. You can pop the hydrometer directly into the must or may take a sample of the grass and add it to your jar of trial. His initial density / OG is usually in the range of 1.035 to 1.050. After fermentation its seriousness final FG should have dropped to 1.006 to 1.012. Once you have these two readings you can use the following equation to calculate the% alcohol content and volume of beer.
ABV (alcohol by volume) = Severity Drop/8.06%
for example. If SG = 1.045 and FG = 1.008% alcohol calculate as follows:
ABV = (45-08) / 8.06 = 4.59%
STEP 6
Once the wort has cooled to a temperature below 30 ° C pitch (add) the yeast and mix well. If grass is above 30 º C then put the lid on the fermenter and leave for an hour or two to cool. Place the fermenter in a bath of cold water will accelerate this process. After releasing the yeast leaving the fermenter in a room where the temperature is 18-26 degrees C. The yeast can become inactive at temperatures below 18 º C. alcoholic flavors can develop at temperatures above 26 ° C. Keep the temperature constant will improve the quality of his beer.
FERMENTATION
During fermentation, yeast is added to the must convert the sugar into alcohol. During the first 12-24 hours of fermentation there will be plenty of activity with large amounts of CO2 gas are produced by yeast. If you are using an airlock this will bubble every few seconds. A head how big the top of the grass.
After 3-5 days this yeast head will have subsided and fermentation will have slowed. Leave a beer sitting on the primary education from 7 to 10 days. The specific gravity of the beer and can be checked, and once you get two stable hydrometer readings within a 24 hours may be transferred to a barrel or bottles. Beer can also be put into a container of foam during a period (10-14 days) to produce a beer cleaner flavor, this also has the advantage of allowing the beer to clear a bit and reduce sediment in the barrel or bottle.
BOTTLING
You must add sugar your beer before bottling. This process is called priming. The sugar will start a mini fermentation in each bottle and carbonate your beer. Sugar can be added directly to the bottle (usually 1 teaspoon of sugar to each bottle), or add sugar to the beer by using a bucket bottling.
Ideally a bottling bucket should be used for the purging of his beer. You can use the fermenter. The amount of sugar you use depends style of beer they are doing, but this amount is usually between 50g – 80g. You can also use different types of sugar. Many homebrewers recommend using glucose as priming sugar as it has little or no effect on the flavor of your beer. Glucose is readily available in most pharmacies and supermarkets. Boil the glucose in 50 ml of water for a few minutes to dissolve, cover and leave to cool for long. Then pour the solution of glucose in your bottling bucket and siphon the beer on top of it. You do not have to stir or mix. Note that when transferring the beer from one vessel to another that you should immerse the tube in the beer and fill the bottom up. This is done to avoid aerating your beer preventing oxidation.
Now it's time to bottle your beer.
Method 1: Transfer the beer to each bottle through a tube connected to the output of your bottling bucket. The pipe should be long enough to reach the bottom of the bottle.
Method 2: Transfer the beer to each bottle with a tube. Its suction pipe must have a small tap to regulate flow of beer. A length of pipe can be attached to this key so you can fill the bottle from the bottom up.
Method 3: A bottling stick can be used in any of the above methods. The stick has bottled a small valve on the end which is pressed against the bottom of each bottle so that the flow of beer. When taken out of the bottle of beer flow stops. This is by far the most efficient way of bottling beer. The stick cylinder can be connected directly to the tap of your bottling bucket or at one end of the suction tube (heat one end of the suction tube into boiling water and then spread over the bottling stick).
Note: To start the flow of beer through its use the suction pipe one of the following two methods. Place a small piece of tubing, about 2 inches long, over the faucet in suction tube and suck the beer through the tube to initiate flow. Delete this piece of pipe at the last second. This is done to prevent the bacteria from the mouth comes into contact with beer.
Another first method is to fill the suction pipe with water closing the tap and holding your thumb on the other end to seal in the water. Now quickly submerge the open end in your beer. The water will not flow in the beer due to the pressure in the tube. Now squeeze the water by opening the tap. When the beer replaces the water in the tube off the tap. Now you are ready to transfer the beer to your bottles or other ship
By Finally cap your bottles and put on deposit for conditioning.
CONDITIONING
The beer must be conditioned for a period of time to mature. It is recommended that the condition of your beer for 4-6 weeks before drinking. Most brewers will tell you that the longer you leave, the better the taste. After bottling must store the beer in a warm place (18-24 degrees C) for a week or two for the priming sugars can ferment and then move the beer to a cooler place, etc as your shed for the rest of the conditioning period. The beer clear and mature better at cooler temperatures.
You beer is now ready for drinking. Enjoy!

About the Author

Review Of Freak Barrel Kit

Crosman Recon Airsoft Kit, Brown/Black $71.99 Short-barrel gun with a pistol grip

Mad Bull Gemtech G5 Barrel Extension, Black $75.54 Barrel extension Black For airsoft use

Mad Bull Gemtech Halo Barrel Extension $75.54 Barrel extension For airsoft use

Mad Bull Gemtech Blackside Barrel Extension, Black $47.88 Barrel extension 14mm counterclockwise thread Black The barrel extension fits on the outer barrel of the gun with a 14mm counterclockwise thread. The barrel extension is just for looks and will not actually suppress the sound/noise of your airsoft gun. For airsoft use only.

Umarex Barrel for Beretta CO2 .177 Pistol $23.99 Umarex barrel for beretta CO2 pistol (.177) Part number: 41940031

Air Venturi Ported Muzzlebrake, .579" Barrel Diameter $31.19 Ported muzzlebrake .579" barrel diameter

UTG Deluxe Tri-Rail Barrel Mount $11.94 Universal Tri-Rail Barrel Mount Complete with Laser Clamping Feature – Each Rail with 2 Slots.

Leapers Deluxe Shotgun Tri-Rail Barrel Mount $27.54 Shotgun Tri-Rail Barrel Mount Complete with Flashlight Clamping Feature – Each Rail with 5 Slots

Mad Bull Whisper .45ACP Fake Barrel Extension, Black $34.74 Fake barrel extension Counterclockwise thread Black The fake barrel extension attaches the the outer barrel with a counterclockwise thread and extends your gun’s inner barrel. Pick one up for your next skirmish! For airsoft use only.

Walther CP88 barrel 4" to 6" Blued $67.19 An interchangeable barrel sysem from 4" to 6". Barrel assembly for the CP 88 blued models. Increase your speed and accuracy with this accessory.

Daisy Cleaning Kit, .177" caliber $23.94 Can be used on .177 caliber BB or pellet rifles or pistols. Keeps your rifle or pistol performing well. Great for clearing pellets stuck in the barrel. Includes cleaning rods, Daisy gun oil and cleaning patches. .177" Pellet & BB guns

Mad Bull Gemtech Outback II Fake Silencer & Barrel Extension Tube $34.74 Fake silencer & barrel extension tube 14mm counterclockwise thread For airsoft use The fake silencer & barrel extension tube attaches to the outer barrel of your airsoft gun with a 14mm counterclockwise thread. For airsoft use only. ATTENTION: The fake silencer is just for looks and will not decrease the sound of your airsoft gun.

JB Unicorn Barrel Extension, Fits AR AEG Rifles, 9.5" $57.54 Barrel extension 14mm counter clockwise thread 9.5" This 9.5" long profile barrel extension by JBU fits all airsoft rifles with 14mm counterclockwise thread. The barrel extension can be used with standard M4 length outer barrels. For airsoft use only.

JB Unicorn 6.01mm Barrel – Mod4 Series, 363mm, 14.29in $45.54 6.01mm x 363mm, 14.29inches tight bore inner barrel, hard anodized aluminum construction. Fits Mod4 AEGs.

Walther CP88 barrel 4" to 6" Nickel $71.99 6" nickel plated barrel assembly for the CP 88 nickel plated models. Increase your speed and accuracy with this accessory.

AirForce 12" Barrel, .25 Cal, Lothar Walther $145.2 12" choked Lothar Walther Barrel .25 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will decrease when attached to the Talon & Condor Extremely accurate!

AirForce 18" Barrel, .177 Cal, Lothar Walther $193.5 18" choked Lothar Walther Barrel .177 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon SS and decrease when attached to the Condor Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 18" Barrel, .20 Cal, Lothar Walther $193.5 18" choked Lothar Walther Barrel .20 caliber Fits AirForce Talon, Talon SS & Condor rifles Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon SS and decrease when attached to the Condor Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 18" Barrel, .22 Cal, Lothar Walther $193.5 18" choked Lothar Walther Barrel .22 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon SS and decrease when attached to the Condor Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 18" Barrel, .25 Cal, Lothar Walther $193.5 18" choked Lothar Walther Barrel .25 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon SS and decrease when attached to the Condor Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 24" Barrel, .177 Cal, Lothar Walther $229.8 24" choked Lothar Walther Barrel .177 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon or Talon SS Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 24" Barrel, .20 Cal, Lothar Walther $229.8 24" choked Lothar Walther Barrel .20 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon or Talon SS Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 24" Barrel, .22 Cal, Lothar Walther $229.8 24" choked Lothar Walther Barrel .22 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon or Talon SS Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 24" Barrel, .25 Cal, Lothar Walther $229.8 24" choked Lothar Walther Barrel .25 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon or Talon SS Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

Smith & Wesson 6" Barrel, .177 Cal., Matte Black, Fits S&W 586 CO2 Revolver $67.19 S&W 6" barrel .177 caliber Matte black shroud Fits Umarex-made Smith & Wesson 586 CO2 revolvers Increases velocity over the 4" barrel Easy to install No machining involved Includes shroud, barrel & screw Does not fit S&W firearms or airsoft guns If you’ve got an Umarex S&W 586 CO2 revolver with a 4" or 8" barrel, then this 6" one will make your collection complete. The longer the barrel on a CO2 gun, the greater the velocity.

S-Thunder BB Shower, Standard Barrel, Blue $71.99 BB shower shell For use with 40mm S-Thunder grenade launchers Compatible with all gas types Holds 80 BBs, 7 x 11mm paintballs or 4 x 17mm paintballs 20-30m effective range Standard barrel Blue 1.57" diameter 4.33" long 0.52 lbs This S-Thunder BB shower shell can be fired using any 40mm S-Thunder grenade launcher or be detonated by hand. You can fill this shell with paintballs, powder balls or BB pellets and operate it with any type of gas ranging from CO2 to green gas. This shower shell gives off a loud and satisfying 78-110dB explosion when triggered.

AirForce 12" Barrel, .177 Cal, Lothar Walther $145.2 12" choked Lothar Walther Barrel .177 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will decrease when attached to the Talon & Condor Extremely accurate! Can be used with the AirForce end cap (not included) on the Condor, which strips away turbulent air for a quieter report

AirForce 12" Barrel, .20 Cal, Lothar Walther $145.2 12" choked Lothar Walther Barrel .20 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will decrease when attached to the Talon & Condor Extremely accurate! Can be used on the Condor with the AirForce end cap (not included), which strips away turbulent air for a quieter report

AirForce 12" Barrel, .22 Cal, Lothar Walther $145.2 12" choked Lothar Walther Barrel .22 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will decrease when attached to the Talon & Condor Extremely accurate! Can be used on the Condor with the AirForce end cap (not included), which strips away turbulent air for a quieter report

Smith & Wesson 586, 6-inch Barrel $295.14 10 Shots, Double-/Single-Action

Smith & Wesson 586, 4-inch Barrel $275.99 10-shot Repeater, Double-/Single-Action

939 UHC Revolver, 2.5 Barrel $32.34 Spring powered. Replica shells hold BBs.

UTG Low-Profile Dragon Claw Clamp-on Barrel Bipod $25.8 High Tech Durable Aluminum Construction Clever Adjustment Wheel for Wide Range of Barrel Sizes – 11mm to 19mm User Friendly Clamp-On Features Unique Posi-Lock Feature to Prevent Tipping Foldable with Fully Adjustable Center Height From 9" to 11"

JBU Fake Airsoft Suppressor, 6.75", Aluminum, Incl. Barrel Extension $71.99 JBU (MSS) modular supressor system Aluminum alloy material 14mm counterclockwise thread 5-pc set Unique JBU serial number 6.75"x1.5" This high-quality modular suppressor system by JBU will enhance the look of your airsoft gun. The modular suppressor system is made of aluminum alloy material for extra durability. The 5-piece set includes a barrel cap, forward extender, base extender, flash hider & adapter. Does not suppress the sound/noise of your gun. For airsoft use only.

Walther CP88, Blued, 6 inch barrel $227.94 Black grips & compensator

Walther CP88, Nickel, 6 inch barrel $251.94 Black grips & compensator

Walther CP88, Nickel, 4 inch barrel $239.99 Black grips

HFC HG-132 4 Barrel Gas Revolver, Black $53.94 Adjustable Rear Sight, Semi-Auto

HFC HG-132 4 Barrel Gas Revolver, Silver $53.94 Adjustable Rear Sight, Semi-Auto

HFC HG-133 6 Barrel Gas Revolver, Black $53.94 Adjustable Rear Sight

HFC HG-133 6 Barrel Gas Revolver, Silver $53.94 Adjustable Rear Sight

939 UHC 2.5 inch barrel revolver, Silver $32.34 Spring powered. Replica shells hold BBs.

Beeman Carnivore Air Rifle, RS2 Trigger $251.99 3-9×32 Scope, Fluted Barrel

Beeman Elkhorn Air Rifle, RS2 Trigger $251.99 3-9x32AO Scope, Fluted Barrel

Gamo Shadow Sport $215.99 Bull barrel. Scope Included

Benjamin Marauder PCP Air Pistol $467.99 8-rd Repeater, Shrouded Barrel

Diana RWS 34P Pro Compact $321.3 Shorter barrel = easier handling

Diana RWS 350 Feuerkraft Pro Compact $515.4 Shorter barrel = easier handling!

RWS Lock Down 1-Pc Mount w/1" Rings, 11mm Dovetail, Barrel Droop Compensation $33.54 1" rings Fits 11mm dovetail 2 hex screws per ring 4 hex screws secure base to scope rail 2 recoil stop pins .025" elevation compensates for barrel droop Made of aircraft-grade aluminum Includes hex wrench Black matte

RWS Lock Down 1-Pc Mount w/30mm Rings, 11mm Dovetail, Barrel Droop Compensation $33.54 30mm rings Fits 11mm dovetail 2 hex screws per ring 4 hex screws secure base to scope rail 2 recoil stop pins .025" elevation compensates for barrel droop Made of aircraft-grade aluminum Includes hex wrench Black matte

Daisy 1938 Red Ryder Kit $65.99 The perfect kit for a new shooter!

ECHO 1 Short M203 Airsoft Grenade Launcher, Mod4/Mod16 Series $117.54 Echo1 2 in 1 M203 Launcher Kit RIS Mount Included: Mounts onto all 20mm RIS (Quick Detach) Barrel Mount Included: Mounts on most Mod4 / Mod16 series AEG Barrels Full metal Frame and Tube Reinforced Trigger / pin assembly for enhanced durability

CenterPoint Laser Boresighter, .17 to .50 Cal Guns, Min. 3.8" Barrel Needed $42.3 CenterPoint red laser boresighter Fits .17 to .50 caliber guns Also compatible with 12-, 16- and 20-gauge shotguns Works with air rifles & air pistols with minimum 3.8-inch barrel 6 adapters 6.5"x0.5"x0.5" Includes batteries Do not use on guns that have muzzlebrakes, silencers, fake silencers, shrouds or noise dampeners. CenterPoint’s red laser boresighter is battery-powered and has 6 adapter fittings for .17 to .50 caliber gun (air rifles, air pistols, firearms & airsoft guns). It also fits 12-, 16- and 20-gauge shotguns. Stop wasting time and ammo manually sighting-in your targets!

Umarex Elite Force 1911A1 CO2 Airsoft Pistol $119.94 Full Metal , Blowback , Threaded Barrel

Gamo Shadow Sport with Nitro Piston $347.98 Bull Barrel, 3-9×40 Scope & Mount

Gamo Varmint Hunter Stalker Air Rifle $251.99 Dampener, Bull Barrel, Scope, Laser

Gamo Varmint Hunter with Nitro Piston $299.99 Gas Spring Rifle with Bull Barrel

Hammerli Nova $359.99 Fixed Barrel and Spring Lock Loading

Echo 1 MTC 1 AEG Airsoft Rifle, Black $251.99 Modular tactical carbine, short barrel

Falcon Airguns Prairie Falcon Profile Rifle $1151.99 Shrouded Bull Barrel, 8-rd Clip

Falcon Airguns Prairie Falcon Sporter Rifle $1031.99 Shrouded Bull Barrel, 8-rd Clip

Socom Gear Gemtech Oasis Gas Airsoft Pistol $96 Non-Blowback, Extended Outer Barrel

Tactical Force Combat CO2 Blowback pistol $71.94 Metal slide & barrel, Double Action

Tactical Force Combat CO2 pistol, LE Blue $71.94 Metal slide & barrel, Double Action

Crosman Stinger S32P Pump Airsoft Shotgun $35.94 Short-barrel gun with a pistol grip

S-Thunder Pistol Grip Long Barrel Grenade Launcher $71.94 For M203 / 40mm Gas Powered Grenades

Walther CP88, Nickel, 6 inch barrel, CO2 Pistol $347.4 Wood grips & compensator

JBU Tight Bore 6.03mm Barrel – AK Series, 455mm, 17.9in $33.54 Hard Anodized, aluminum construction. Should increase FPS by 10-20 without additional modifications.

JB Unicorn 6.01mm Barrel – AK Series, 455mm, 17.9in $45.54 Hard Anodized, aluminum construction. Compatible with AK series

JB Unicorn 6.03mm Barrel – Mod16A3 Series, 509mm, 20.0in $33.54 Hard Anodized, aluminum construction. Should increase FPS by 10-20 without additional modifications.

JB Unicorn Tight Bore 6.03mm Barrel – Mod4 Series, 363mm, 14.29in $35.94 Hard Anodized, aluminum construction. Should increase FPS by 10-20 without additional modifications.

WE P08 Metal Gas 4 inch barrel, Silver $155.94 Full metal gas blowback pistol

Smith & Wesson Interchangeable Barrel System for the 686, 6", Nickel $80.64 With the purchase of additional barrels for your S & W 686 you can improve your accuracy and projectile speed with the longer barrels, and have the flexibility of changing to accommodate a shorter shooting distance.

Walther CP88, Nickel, 4 inch barrel, CO2 Pistol $323.99 Wood grips

Walther CP88, Blued, 4 inch barrel, CO2 Pistol $287.99 Wood grips

Walther CP88, Blued, 4 inch barrel, CO2 pistol $211.19 Black grips

Walther CP88, Blued, 6 inch Barrel, CO2 Pistol $323.99 Wood grips & compensator

UHC 939 2.5 inch barrel revolver, Silver/Black $32.34 Spring-powered. Replica shells hold BBs.

WE P08 Metal Gas 4 inch barrel airsoft pistol $113.94 Full metal gas blowback pistol

WE P08 Metal Gas 6 inch barrel airsoft pistol $119.94 Full metal gas blowback pistol

Magnum Research Baby Desert Eagle BB gun kit $47.99 CO2 BB Gun Kit

Multi-Shot Combat Tactical Shotgun $71.99 3 BBs Each Shot, Triple Barrel System

Gamo Varmint Hunter $179.99 Scope & torch light w/ Bull Barrel

SIG Sauer P226 X5 Sport IPSC CO2 Full-Metal Pistol $119.99 Airsoft GBB, X-mount & Barrel Extension

Gamo Varmint Stalker Air Rifle $235.19 Noise Dampener, Bull Barrel, 4×32 Scope

Gamo Varmint Stalker Deluxe Air Rifle $239.99 Noise Dampener, Bull Barrel, 4×32 Scope

ECHO 1 Long M203 Airsoft Grenade Launcher, M4/M16 Series $119.99 Echo 1 grenade launcher 3 mounting systems: R.I.S., monobloc & barrel for standard M4 Marui-type Metal barrel, barrel track, release lever, trigger, safety, triggerguard & barrel attachment rings

Multi-Shot Combat Commando Shotgun $65.94 3 BBs Each Shot, Triple Barrel System

IZH 46M Breech Seal Kit $11.99 Breech seal kit for IZH 46/46M pistol Includes 2 seals

OTIS Flex Cleaning Kit $35.99 Kit comes complete in a zippered nylon belt or pocket pouch. Kit includes: a 34"-rifle and a 16"-pistol flexible cleaning rods with a connector that enables you to have an extra-long rod, 1/2 oz. bottle of bore cleaner, patches, .177 T-Handle Stud, .177 T-Handle bar, .22 short brush, .177 short brush, and an optical bore light. Introducing the new item that comes in your Flex Cleaning System. The Video Instruction shows you the ins and outs of cleaning your air gun. Plus other Otis Products that are be beneficial to the long term use of your air gun.

Echo1 ASR, JP-54, Upgrade Kit $35.94 Echo1 ASR (JP-54) Sniper Rifle Upgrade Kit Increases FPS of Rifle by (40-60 FPS) Comes with Upgrade Spring Upgrade Spring Guide Upgrade Piston

Otis Lens Cleaning Kit $11.99 The Otis Lens Cleaning Kit contains everything necessary to preserve the quality and functionality of scopes, rangefinders, laser sighting devices, binoculars, cameras, and eye wear. It includes premium anti-fog lens swabs, an Otis microfiber lens cloth, and a mohair lens brush. These components can easily be added to any of the Otis Cleaning Systems. Dont let the poor accuracy of unclean optics prevent you from achieving the results you deserve! Microfiber lens cloth Anti-fog lens swabs Mohair lens brush 1/2 oz anti-fog lens cleaner in spray bottle Mil-spec lens-cleaning tissue paper

Marksman 2000K Air Pistol $37.9 Shooter’s Kit

CenterPoint Universal Laser/Flashlight Kit $43.19 Laser/flashlight kit Mounts onto any 1" scope tube Up to 50mm objective 50 yds visibility in daylight 200 yds visibility at night Adjustable for windage and elevation Incl. (3) LR44 button cell batteries, 3 V flashlight battery & two tactical on/off pressure switches This flashlight & laser kit by Crosman is great for medium to close range shooting. Mount this onto any 1" scope tube and enjoy increased accuracy from your favorite gun. The flashlight comes with a 3-volt battery and can illuminate your targets up to 30 yards. The laser is adjustable for windage and elevation, it is rated at 50 yards visibility during the day and 200 yards visibility at night. Pick up this kit for dependable and precise target acquisition!

Winchester Portable Campers Kit $79.14 This is the only kit you will need for your next camping trip. A complete assortment of cooking utensils, along with four sets of tableware. All pieces are manufactured using 400-grade stainless steel, and the blades are hand honed to a razor’s edge. All pieces fit in a heavy-duty nylon embroidered bag for easy carrying or storage. Set comes complete with Two interchangeable black rubber locking handles Interchangeable boning blade Large chef’s blade Serrated utility blade Large serving/stir spoon Turning/carving fork Spatula/flipper Flatware service for four including four spoons, forks and serrated knives Acrylic cutting board All pieces are stored in a heavy-duty embroidered nylon case.

ThermaSCENT Scent Dispenser Refill Kit $5.99 The ThermaSCENT Refill Kit lasts for up to 12 hours and contains 1 ThermaCELL butane cartridge and 3 mats. Just saturate the mat with any scent, slide the mat onto the ThermaSCENT platform, and insert the new butane cartridge. When you arrive at your hunting spot, simply turn on to start attracting game.

Gamo .177 Caliber Cleaning Kit $15.54 Three piece rod disassembles for easy storage. All components are expressly designed to eliminate the possibility of damage to the relatively shallow rifling of airguns. Always make sure your airgun is unloaded before cleaning or oiling. Great basic and compact maintenance kit for use on .177 caliber pellet rifles or pistols

Yukon NVMT 1×24 Head Mount Kit $443.99 Reference # 24025 Turn your NVMT into a hands-free monocular with Yukon’s NVMT 1×24 Head Mount Kit. This kit comes with a NVMT 1×24 monocular and a head mount to turn your NVMT into a hands-free monocular. The low magnification prevents distance distortion and comfortable viewing, while working.

Leisure Pro Scuba Tank Accessory Kit $47.99 Accessory kit for Leisure Pro 80 cu ft scuba tank Includes black tank boot, yellow tank cover & yellow K-valve protector

Yukon NVMT Laser 3×42 Rifle Scope Kit $540 This is a Gen 1 NV scope and will not stand up to heavy-recoiling firearms or magnum spring-piston airguns. The NVMT Laser 3×42 Rifle Scope Kit is perfect for long-distance observation and includes everything needed for an outdoor adventure. The NVMT 3×42 Rifle Scope Kit provides the user with everything needed to mount the included NVMT on a rifle. Versatility is this affordable scope’s middle name. Included Accessories: Weaver Mounts Padded Corduroy Case with Carrying Strap NVMT 3×42 Gen 1 Eyepiece Laser Pointer

Beeman P17 Pistol Kit $55.14 Gun, Glasses & Pellets

Daisy Powerline 5693 Kit $65.94 BB Pistol

Mossberg Airsoft Tactical Kit $33.54 .45 Pistol & 590 Shotgun Grip Model

Remington AirMaster 77 Kit $83.99 4×20 Scope, Rings, Ammo & Targets

Marksman 3030K Slingshot Kit $10.79 Includes 100 .30 cal. steel shot

Marksman 3055K Slingshot Kit $11.99 Folding Slingshot & Ammo

Daisy Powerline 008 Kit $81.59 Gun, CO2, Targets, Glasses & Ammo

Daisy Powerline 15XT KIT $47.99 BBs 15 Shots

Beeman P17 Kit $59.99 P17 with Red Dot Sight

Crosman 760 Pumpmaster Kit $59.99 4×15 Scope, Targets, Glasses, Ammo

Crosman T4 Kit $83.99 New CO2 pellet and BB gun

Daisy 5880 Shadow Kit $71.94 Scope, Targets, Ammo & Glasses

Franchi SPAS12 ShotgunTraining Kit $51.54 Includes target, BBs and safety glasses

Crosman PRO77 Kit $80.64 New CO2 blow back BB gun

Gamo .177 Air Gun Cleaning Kit $23.99 Air rifle yoke (stand) Gamo airgun oil 25 felt cleaning pellets 25 cleaning patches 2-piece cleaning rod 1 patch loop 1 nylon brush Rod handle Protective cover The Gamo cleaning kit contains everything you need to clean and maintain your spring-piston air rifle or air pistol. The portable gun stand is light and easy to assemble. Take it from the shop to the range. Made of durable, easy-to-clean material. Sturdy enough to hold any adult airgun.

RWS Rifle Shooter’s Kit, .177 Caliber $43.19 Kit provides everything needed to shoot and maintain your RWS .177 airgun: Jointed Cleaning Rod, Chamber Lube, Spring Cylinder Oil, Oiling Needle, .177 Jag, .177 Bore Brush, 1 tin each/250 Meisterkugeln & Superdome Pellets, 25- .177 cleaning pellets and four 10 meter – 4" x 4" targets.

RWS Rifle Shooter’s Kit, .22 Caliber $43.19 The RWS Shooter’s Kit contains everything you need to maintain your .22 caliber air rifle. Includes: 3-piece cleaning rod .22 caliber jag .22 caliber brush 1/2-oz RWS chamber lube 1-oz RWS spring cylinder oil 10-meter distance targets (10 targets) RWS Superdome pellets (500-count) .22 caliber cleaning pellets (25-count) 3" needle to apply lubricant

Well MB03/07 Series Sniper Rifle Power Up Kit $33.54 MB03/07 Series Sniper Rifle Power Up Kit 20% increase in accuracy, velocity & performance Comes with Power Up Spring Power up Spring Guide Power Up Cylinder

Air Arms S200 10-Shot Conversion Kit, .177 or .22 Cal $71.99 Turn your single-shot Air Arms S200 into a repeater! Fits single-shot S200 rifles Includes conversion kit (10-shot mag not included) Use with either .177 or .22 caliber guns You must also purchase the appropriate caliber circular clip (see options in left column) to use this conversion kit

CenterPoint Elkhorn Jr. Compound Bow $59.99 Complete Kit, Ready to Shoot!

Crosman TAC 1 and P30 $71.99 Airsoft CLEAR TAC Kit

Desert Eagle .44 Airsoft $33.59 Magnum High Impact Kit

Daisy Red Ryder 70th Anniversary Edition with Tin $55.14 The perfect kit for a new shooter!

UTG Performance Upgrade Kit for Type 96 Spring Airsoft Sniper Rifle $35.94 Performance Upgrade Kit for UTG Sport S368 Shadow Ops Airsoft Sniper Rifle 20% increase in accuracy, velocity & performance! Includes upgraded spring, metal piston & metal spring guide with torque-absorbing ball-bearing set Easy installation

AirForce Edge Flexi-Weight Kit, 5 Weights, 5 O-Rings $35.4 AirForce Edge Flexi-Weight kit Mount on frame or muzzle ext. of an Edge air rifle Redistributes weight for the needs of any shooter O-rings secure the weights Includes 5 weights and 5 o-rings If your AirForce Edge air rifle is used by more than one shooter or you’ve got a shooter who’s growing and needs to adjust the gun’s weight depending on height and growth, then these Flexi-Weights are the ideal way to accommodate change. Rapidly put them on and take them off. Easy to attach additional weights, too. Simply slide on and hold tight with the included o-ring. This economical 5-weight kit is ideal for clubs.

Air Arms S200 10-Shot Conversion Kit, .22 Cal, Incl. 10-Shot Mag $107.99 Turn your single-shot Air Arms S200 into a repeater! Fits single-shot S200 rifles Includes conversion kit & 10-shot mag

Mossberg Tactical Duty Airsoft Kit $43.14 Spring-powered shotgun & pistol, black

IZH 46M Match Pistol Kit $671.99 Incl. Red Dot Sight & Case

Walther PPK/S Kit, Black $83.99 Gun, CO2, Targets, Glasses & BBs

Crosman Tactical Recon Airsoft Kit $77.94 Incl. AS32 shotgun & P30T pistol

Crosman Stinger Challenge Airsoft Kit $47.99 2 spring pistols, BBs & sticky target

DPMS Panther Arms ON DUTY KIT $41.99 A15, COLT MK IV, & Accessories – black

Airsoft M4 Field Duty Kit $119.94 Colt MK IV Spring Pistol & A17 R.I.S AEG

Walther P99 — Black Extra Kit $29.94 Spring Powered Airsoft Pistol

Crosman Stinger R39 Airsoft Kit $53.88 Rifle + Pistol & much more

Crosman Stinger R39 Kit Clear $59.94 Rifle + Pistol & much more

Crosman Urban Mission Airsoft Kit $39.54 M74 Mini Machine Gun & P30 Spring Pistol

Hoppe’s Air Rifle & Air Pistol Cleaning Kit, .17 Caliber $11.94 Hoppe’s airgun cleaning kit 3-piece steel rod with looped handle 2.25-oz. Hoppe’s 9 lubricating oil Brass jag .17-cal brass brush* Cleaning patches Gun care guide *The brush is .17 caliber. It will still work on your .177-caliber airguns. While airguns don’t require constant cleaning like firearms, there are times when they need to be cleaned to achieve maximum accuracy. Hoppe’s has a reputation for making high-quality gun oil and cleaning accessories.

Hakkotsu Thunder B CO2 Package Grenade Kit B $35.99 Grenade kit Package includes 1 main core body, 3 cylinder shells & 4 safety pins The Hakkotsu Thunder B grenade is powered by disposable CO2 gas and is ideal for use in milsim bombing demonstrations. The color & shape of this grenade is similar to it’s real military counterpart in that a safety pin must be pulled to trigger the explosion. The Thunder B is reusable, simply replace the CO2 gas cylinder along with the outer shell and you’ll be ready to fire again! This grenade creates a noise level explosion of 130db, be alert when using.

Air Venturi Flash Suppressor, Fits AirForce Bounty Hunter Air Rifles, 1/2"x28tpi $23.94 Flash suppressor Fits AirForce Bounty Hunter air rifles 1/2"x28tpi (internal threads) AirForce Bounty Hunter air rifles come with our custom flash hiders. When we sell a Bounty Hunter rifle, we have to thread the barrel to fit the flash hider. If you already have a threaded barrel on your Bounty Hunter and need a different or spare flash hider, this will fit. If you’re ordering a Condor, Talon or Talon SS (or an extra AirForce barrel) at the same time and want us to thread the outside of your barrel (for a minimal fee), then click the "Add Service" button.

Swiss Arms Bipod, Includes 3 Mounts $45.54 Swiss Arms bipod Aluminum Folding, telescoping legs Includes 3 mounts: Weaver/Picatinny, barrel clamp & sling swivel stud

Benjamin & Sheridan Repair Kit, Fits Some Post-1995 Multi-Pumps w/Cartridge Valve $19.14 Repair kit fits these multi-pump guns made after 1995 & they have a compression tube that slides out of the assembly & does not need a special tool (has a cartridge valve & the valve is NOT soldered). It may be necessary to push out the assembly from the front of the tube: Benjamin 397 & 392 guns as well as Sheridan C9 (Silver Streak) & CB9 (Blue Streak). To determine if this kit is for you: Remove the screw in front of triggerguard to remove rear part of the stock Remove the pins or screws that hold the retention cap at the rear of the receiver Remove the guide pin, spring & hammer to reveal the compression tube If the brass compression tube comes out in one piece, then this is the kit you need If your gun has a rounded square hole with a valve stem sticking up through it, then you need the other repair kit (CR/Repairkit) If you need assistance, contact our technicians at 888-262-4867, ext. 244

Beretta Laser, Fits 92FS Pellet Pistol $31.19 Laser Fits Beretta 92FS pellet pistol Clamps under the barrel Screw mount On/off LED indicators Increase the accuracy of your Beretta 92FS CO2 pellet pistol with this laser. It slides on under the barrel and holds with clamping pressure (screws tighten the mount). Not suitable for the Beretta Elite II air pistol or any handgun that has an accessory rail under the barrel.

Hill MK3 Hand Pump Full Service Seal Kit w/Micron Filter $43.19 Full service seal kit For Hill MK3 hand pumps Includes micron filter, 7 seals and other misc. replacement parts Service seal kit for the Hill MK3 hand pump. Regular maintenance is essential for keeping your Hill hand pump in proper working condition. Includes micron filter, piston seal and all other exchangeable seals. The MK3 hand pump has 3 rings on the top and bottom of the pump body tube.

Tech Force Spring Gun Cleaning Kit with Seals, Mainspring, Oil + More $11.46 Tech Force cleaning kit Suitable for various Tech Force spring-piston airguns 6 leather seals: fit TF S2-1, TF24, FT15, TF39 & TF49 1 mainspring: fits TF15, TF39 & TF49 1 safety: fits TF15, TF39 & TF49 Also includes oil* in a spout-top squeeze bottle, segmented cleaning rod, nylon brush & cloth mop *The oil is not chamber lube. It’s a petroleum-based oil for wiping down the exterior of your gun to remove fingerprints and leave a protective coating on wood and metal surfaces.

AirForce Edge Flexi-Weight Kit, 1 Weight, 1 O-Ring $8.1 AirForce Edge Flexi-Weight kit Mount on frame or muzzle ext. of an Edge air rifle Redistributes weight for the needs of any shooter O-rings secure the weights Includes 1 weight and 1 o-ring If your AirForce Edge air rifle is used by more than one shooter or you’ve got a shooter who’s growing and needs to adjust the gun’s weight depending on height and growth, then these Flexi-Weights are the ideal way to accommodate change. Rapidly put them on and take them off. Easy to attach additional weights, too. Simply slide on and hold tight with the included o-ring.

Walther Airsoft P99 Special Operations BiColor $27.54 Spring Powered – BiColor Action Kit

Benjamin & Sheridan Repair Kit, Fits Some Pre-1995 Multi-Pump Guns w/Soldered Valve $33.54 Repair kit fits these multi-pump guns made before 1995 (they have a soldered valve): Benjamin 397, 392, 340, 342 & 347 guns as well as Sheridan C9 (Silver Streak) & CB9 (Blue Streak). To determine if this kit is for you: Remove the screw in front of triggerguard to remove rear part of the stock Remove the pins or screws that hold the retention cap at the rear of the receiver Remove the guide pin, spring & hammer to reveal the compression tube If the compression tube appears to be brass & is one piece with a pin protruding from it, you’ll need the other kit (CR/RepairKitC9) instead of this one If your gun has a rounded square hole with a valve stem sticking up through it, then the kit shown on this page will fit your gun. The included valve tool (pictured on this page) is needed to remove the parts from the soldered valve body (directions included with kit). If you need assistance or would like Pyramyd Air’s techs to do the installation, contact our technicians at 888-262-4867, ext. 244 This kit includes parts that are still available from Crosman and may require slight modification. If your gun is very old and has been treated with any petroleum distillates and/or solvents that damage rubber seals, the removal of the old parts can be challenging. The obsolete gasket that seals the valve guide to the compression tube can normally be reused. If you used petroleum products, it may be irreparably damaged and will need to be replaced by a thin o-ring. If you would like Pyramyd Air’s tech department to install this kit in your Sheridan or Benjamin rifle, please contact them at 888-262-4867, ext. 5. There will be an additional cost for the installation service, plus shipping both ways…BUT it’ll be done perfectly!

Eastman Outfitters X-Force 500 Crossbow Kit $479.99 Incl. 4 Bolts, Quiver, 4×32 Scope, Rings

Classic Army Sportline M15A4 Tactical Carbine Kit $179.94 Carbine Value Package

Marksman 3330 Slingshot Band Replacement Kit $4.25 For Marksman 30.06, 3027, 3040, 3047, and 3061 Fits most tubular band slingshots with 1/4" (6.35mm)diameter yokes Package includes one band with two vinyl yoke retainers.

Marines Airsoft Battle Spring Rifle & Pistol Kit $59.99 SR01 Rifle, SP01 Pistol, dog tag & more

Marines Airsoft Task Force 6 Airsoft Kit $83.99 Incl. AEG Rifle, spring pistol & holster

Thompson Military Metal M1A1 AEG Kit $239.99 Two Magazines , 2700 Rd Bio BBs

Walther P99 Dueler Spring Target Kit $39.59 Fully licensed trademarks

Crosman 1088B Kit BB & Pellet Pistol $57.59 Incl. Ammo & Glasses

Crosman 664GT Powermaster Air rifle kit $51.59 BB & Pellet Repeater

Daisy 1938 Red Ryder Fun Kit $55.19 Safety Glasses, BBs & Targets!

Daisy Pink 1998 BB Gun Fun Kit $47.99 Safety Glasses, BBs & Targets!

Daisy Powerline 901 air rifle kit $95.99 Gun, Scope, Glasses, Ammo & Targets

Crosman 760 Pumpmaster Kit, Pink Stock $59.94 4×15 Scope, Targets, Glasses, Ammo

Crosman MAR177 AR-15 Upper PCP Conversion Kit $720 Fits AR-15 Lower, .177 Cal.

UTG Master Sniper Green Airsoft Kit $143.94 Gen 5. Bolt Action. 460FPS w/ 0.2g BBs

UTG Master Sniper Airsoft Kit, Black $155.94 Gen 5, Bolt-Action

H&K MP5 & P30 Holiday Kit Black $107.94 Dual Power Rifle, Spring Pistol

H&K MP5 & P30 Holiday Kit, Clear $101.94 Dual Power Rifle, Spring Pistol

Marines Airsoft Dual Spring Airsoft Pistol Kit $47.94 2 spring pistols, BBs & target

300 Round DPMS On Duty Kit Rifle Magazine $22.74 Will fit in: CG18780, 18980. Build material: molded polycarbonate. Color: Balck Easy to fill, just pour in 300 rounds through the top hatch. Easy winding spring dial on the bottom keeps tension on the ammo for smooth feeding. Made in China

Stinger P9T Airsoft Pistol Kit Black $27 Holster Included

Stinger P9T Airsoft Pistol Kit Desert Camo $27 Holster Included

Crosman Stinger S2 Clear Airsoft Kit $65.94 Stinger R36 & P30

Gamo Gun Buddy Rifle Sling, Fits All Air Rifles $15.59 Perfect for any air rifle Lightweight and durable Quick adjustment fasteners Non-slip pebbling Deluxe, shock-absorbing shoulder strap No sling swivels required! Front slips over barrel, back slips over buttpad

Air Arms MPR Muzzle Weight, 2.7 oz. $17.42 MPR muzzle weight 2.7 oz. Slips onto muzzlebrake (tem#:AA-JT459) and attaches with a setscrew (screw not include) Does not fit on barrel–only on optional muzzlebrake (sold separately)

Daisy Precision Max .177 Cal, 7.5 Grains, Flat-Nosed, 250ct $2.99 .177 caliber 7.5 grains Flat-nosed (wadcutter) pellets Graphite coating reduces barrel leading Ideal for low- to medium-power guns 250 pellets in flip-top container

AirForce Striker Weight $11.94 If you want to convert an AirForce Airguns Talon or Talon SS air rifle to a Condor air rifle, you’ll need this striker weight, a Hi-Flo tank and a 24" barrel.

Umarex Compensator, Fits Hammerli 850, Walther 1250 Dominator & Beretta CX4 Rifles $47.99 Rifle compensator Fits RWS 850 AirMagnum, Walther 1250 Dominator (do not use on .25 cal gun) and Beretta CX4 Storm Friction fit Set screw secures compensator to barrel

Crosman 459MT 2-Pc Intermount, 3/8" Dovetail $12.54 Attaches to the barrel & provides a 3/8" dovetail Fits Crosman models 2240, 2250, 2260, 2289, 1322, 1377, 1740 & 1760 Includes 1 set, which is 2 intermounts

Air Arms MPR Palm Rest Kit, Fits S400 MPR Air Rifle $71.94 Palm rest kit Fits Air Arms S400 MPR 10-meter air rifle Includes palm shelf, hex wrench, washers, screws and 2 lengths of extenders Customize your Air Arms S400 MPR air rifle by adding a palm rest for a steadier hold. The extenders come in two lengths that will suit most shooters. Generally speaking, a palm rest will increase your accuracy.

Marksman 2040 $50.34 BB Zinc Repeater Air Rifle Kit

Air Arms MPR Butt Spacer Kit, 3 Spacers, 20mm Total Width $21.59 Butt spacer kit Fits Air Arms S400 MPR 10-meter air rifle Includes 3 spacers of different thicknesses and 3 sets of screws of different lengths Create the perfect length of pull (LOP) with these butt spacer inserts. Made for the Air Arms S400 MPR 10-meter air rifle, these inserts come in three thicknesses and different screw lengths to attach one, two or all three spacers. Ideal for clubs that have more than one size shooter using the S400 MPR air rifle. Also useful if the air gun is used by one shooter who’s still growing.

JBU Fake Airsoft Suppressor, 4.75" Long, Aluminum, Orange Tip $41.99 Fake airsoft supressor Aluminum alloy material 14mm counterclockwise thread JBU laser marking 4.75" long Extend the outer barrel of your airsoft gun with this fake supressor by JBU. The fake airsoft supressor has 14mm counterclockwise threads and easily attaches to the outer barrel of your gun for a unique look in the battlefield!

Laserlyte Mini Laser Bore Sight, Fits .17 to .22 Cal Guns $71.99 Laserlyte laser bore sight Fits .17 to .22 caliber guns (air rifles, air pistols and firearms) Requires minimum 3" barrel (the owner’s manual incorrectly states that you need a min. 4" barrel) 6061 T6 aluminum 650nm laser module Class IIIA laser 5mw power output Includes three 393 batteries 500-yd range at night 1.5 hrs battery life (constant on) Do not use on guns that have muzzlebrakes, silencers, fake silencers, shrouds or noise dampeners. Stop wasting time and ammo manually sighting-in targets. A Laserlyte mini laser bore sight will get your shots within 3 to 4 inches of the bullseye within a couple shots at 100 yards. Air rifles, air pistols and rimfires with at least a 3-inch barrel can use the Laserlyte mini laser bore sight. The batteries come installed in the bore sight.

BKL 1-Pc Adjustable Scope Mount, 1" Rings, 3/8" Dovetail, Black $79.8 1-pc scope mount 3/8" dovetail Low profile 1" rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8" side rails for mounting other accessories 2.5" of clamping length 4" overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz. 6 base screws Matte black Includes 3 hex wrenches Got barrel droop? This new mount will help you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails offer more space to add a laser and a flashlight to augment a scope.

BKL 1-Pc Adjustable Scope Mount, 30mm Rings, 3/8" Dovetail, Black $79.8 1-pc scope mount 3/8" dovetail Low profile 30mm rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8" side rails for mounting other accessories 2.5" of clamping length 4" overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz. 6 base screws Matte black Includes 3 hex wrenches Got barrel droop? This BKL Tech mount lets you adjust the rings just enough to accommodate minor barrel droop issues on your air rifle. Because air rifles usually have just one set of dovetails, the extra side rails give you room to mount a laser and flashlight.

JB Unicorn M120 Upgrade/Tune Up Kit for Model 4 $59.94 Includes: M120 Spring, Reinforced Piston, Metal Spring Guide with Bearing, Aluminum Air Nozzle, 2 port Cylinder, Aluminum Cylinder Head and Piston Head.

Gamo Varmint Hunter Kit, 4×32 Rifle Scope, Laser & Flashlight $83.88 Rifle scope, flashlight & laser (specs are listed for scope only) 4x magnification 32mm objective lens 1" tube 1/4 MOA (1/4" click value @ 100 yds) Crosshair reticle 28.8′ field of view @ 100 yds 3" eye relief 11.8" long Includes pressure cables, removable caps with click buttons for laser & flashlight and 1-pc scope mount with 3/8" dovetail with rings for flashlight and laser. Other features: Hunting turrets Fully coated lenses Shockproof Fogproof Waterproof Anodized matte finish

Marksman 3355 Slingshot Hyper-Velocity Band Replacement Kit $5.46 Tapered bands provide 30% greater velocity Marksman’s hyper-velocity bands represent the ultimate in slingshot bands. And, because of their easier pull, you don’t have to strain to hold your position before releasing a shot. This makes shooting easier and more fomfortable- with increased accuracy. Fits Marksman Laserhawk slingshot models 3006(T), 3055 and 3060(L) but also fits Marksman models 3025, 3040, 3041 and most slingshots with 1/4" diameter yokes. Package includes one band with two vinyl yoke retainers.

SIG Sauer GSR 1911 CO2 BB Pistol Kit $47.94 Gun, Laser, Safety Glasses & BBs

Crosman M4-177 Multi-Pump Air Rifle Kit, Black $95.99 BB & Pellet Repeater, 3-10 Pumps

Crosman M4-177 Tactical Air Rifle Kit, Tan/Black $83.99 BB & Pellet Repeater, 3-10 Pumps

Daisy Model 9840 Grizzly B Air Rifle Kit $76.74 A fine airgun for new shooters!

Stinger P9 Airsoft Pistol Kit, Dark Earth/Clear $27 Spring Air Repeater Pistol

Crosman Stinger P9T Airsoft Pistol Kit Clear/Black $27 Holster Included

Franchi Stunt Police Spring Shotgun 44 Kit , Clear $51.54 Fast Shooting Foregrip, Anti-Shock ABS

UTG Zytel Clamp-on Bipod $9.54 One Year Warranty Made of durable Zytel. Extremely light weight – only 6oz. Clamps around barrel and fits most guns. Folds to be carried in your pocket or bag. Very sturdy and affordable. Best valued economic solution for your practical need. Use on airsoft guns, airguns & firearms.

H&N Field Target Trophy Power Copper Plated, .22 Cal, 15.12 Grains, Round Nose, 200ct $10.2 .22 caliber 15.12 grains Round nose Copper-coated lead 200 pellets Field Target Trophy Power pellets have a copper coating that helps prevent lead build-up in your airgun’s barrel. H&N Sport pellets are known for their consistency and accuracy. Use these for hunting and plinking.

UTG Special Operations Universal Tactical Black Leg Holster $17.94 Fully adjustable and removable belt hanger. Deluxe non-slip holster pad, and non-slip, fully adjustable and removable leg strap For maximum comfort and provide additional retention for your handgun during extreme operations, rappelling, swimming and jumping. Extra mag pouch. Thumb break security. Universal design – For most medium to large frame pistols. Adjustable closure – For a tight pistol barrel fit. Dimensions: Length: 7 inches Width: 3.5 inches – 2 inches For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a length that is greater than or equal to the length of the holster.

UTG Special Operations Universal Tactical Black Leg Holster, Left Handed $17.94 Fully adjustable and removable belt hanger. Deluxe non-slip holster pad, and non-slip, fully adjustable and removable leg strap – for maximum comfort and provide additional retention for your handgun during extreme operations, rappelling, swimming and jumping. Extra mag pouch. Thumb break security. Universal design – for most medium to large frame pistols. Adjustable closure – for a tight pistol barrel fit. Dimensions: Length: 7" Width: 3.5" – 2" For the best fit, we recommend pistols with a width that is less than or equal to the width of the holster (from the bottom of the trigger guard up to the barrel) and a length that is greater than or equal to the length of the holster.

IZH Drozd BB Gun Fake Suppressor $60.6 Includes suppressor, adapter and knurled thread protector. Want the suppressor look and feel for your Drozd BB gun without the expense, hassle and government oversight? Our .22LR fake suppressor is as close to a real suppressor as you can get without paying the tax stamp. It’s CNC-machined from a solid aluminum rod, given a durable liquid ceramic finish and professionally laser-engraved. Everything is identical to the real ATF-registered suppressors! Since its a fake suppressor, the gun’s report (loudness) is NOT reduced. Many shooters prefer the weight and balance improvement with the added suppressor. In fact, it’ll work on any airgun that has a 1/2"x28 TPI threaded barrel. To ensure exact thread alignment, the threaded adapters are CNC-machined to precision tolerances from a solid steel rod in one lathe operation. They are hot-salt blued to match the gun. The included steel thread protector covers the threads on your barrel when no accessory is mounted. Easy installation in place of the existing barrel nut. No tools or modifications are required.

IZH Drozd Adapter, 1/2"x28TPI, Thread Protector $30.58 The Drozd is one of the most exciting BB guns to hit the market in a long time! If you’re lucky enough to have one and want to mount an accessory that is threaded 1/2"x28TPI, such as our unrestricted fake suppressor, then this is the part you need. To ensure exact thread alignment, the threaded adapters are CNC-machined to precision tolerances from a solid steel rod in one lathe operation. They are hot salt blued to match the gun. The included steel thread protector covers the threads on your barrel when no accessory is mounted. Easy installation in place of the existing barrel nut. No tools or modifications are required. Adapter assembly includes one adapter and one knurled thread protector. This is the way the gun should have come from the manufacturer! Give your Drozd a tactical look… order a threaded adapter today!