Im looking to buy a new barrel for Tippmann 98 custom, will Werks barrel for the A-5 fit my gun?

Is the barrel Werks same for the A-5 as it is for 98 custom, or adapt to different sizes?

It is different threat, and the barrel is not as big Werks. Going with a J & J ceramic or intelligent items.

How to Fit Paint to a Barrel

JB Unicorn Barrel Extension, Fits AR AEG Rifles, 9.5" $57.54 Barrel extension 14mm counter clockwise thread 9.5" This 9.5" long profile barrel extension by JBU fits all airsoft rifles with 14mm counterclockwise thread. The barrel extension can be used with standard M4 length outer barrels. For airsoft use only.

Smith & Wesson 6" Barrel, .177 Cal., Matte Black, Fits S&W 586 CO2 Revolver $67.19 S&W 6" barrel .177 caliber Matte black shroud Fits Umarex-made Smith & Wesson 586 CO2 revolvers Increases velocity over the 4" barrel Easy to install No machining involved Includes shroud, barrel & screw Does not fit S&W firearms or airsoft guns If you’ve got an Umarex S&W 586 CO2 revolver with a 4" or 8" barrel, then this 6" one will make your collection complete. The longer the barrel on a CO2 gun, the greater the velocity.

Mad Bull Gemtech Blackside Barrel Extension, Black $47.88 Barrel extension 14mm counterclockwise thread Black The barrel extension fits on the outer barrel of the gun with a 14mm counterclockwise thread. The barrel extension is just for looks and will not actually suppress the sound/noise of your airsoft gun. For airsoft use only.

JB Unicorn 6.01mm Barrel – Mod4 Series, 363mm, 14.29in $45.54 6.01mm x 363mm, 14.29inches tight bore inner barrel, hard anodized aluminum construction. Fits Mod4 AEGs.

AirForce 12" Barrel, .25 Cal, Lothar Walther $145.2 12" choked Lothar Walther Barrel .25 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will decrease when attached to the Talon & Condor Extremely accurate!

AirForce 18" Barrel, .177 Cal, Lothar Walther $193.5 18" choked Lothar Walther Barrel .177 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon SS and decrease when attached to the Condor Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 18" Barrel, .20 Cal, Lothar Walther $193.5 18" choked Lothar Walther Barrel .20 caliber Fits AirForce Talon, Talon SS & Condor rifles Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon SS and decrease when attached to the Condor Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 18" Barrel, .22 Cal, Lothar Walther $193.5 18" choked Lothar Walther Barrel .22 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon SS and decrease when attached to the Condor Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 18" Barrel, .25 Cal, Lothar Walther $193.5 18" choked Lothar Walther Barrel .25 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon SS and decrease when attached to the Condor Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 24" Barrel, .177 Cal, Lothar Walther $229.8 24" choked Lothar Walther Barrel .177 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon or Talon SS Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 24" Barrel, .20 Cal, Lothar Walther $229.8 24" choked Lothar Walther Barrel .20 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon or Talon SS Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 24" Barrel, .22 Cal, Lothar Walther $229.8 24" choked Lothar Walther Barrel .22 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon or Talon SS Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

AirForce 24" Barrel, .25 Cal, Lothar Walther $229.8 24" choked Lothar Walther Barrel .25 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will increase when attached to the Talon or Talon SS Extremely accurate! If you put this on a Talon SS, it will not have sound suppression. If you need quiet shooting, reattach the silenced factory barrel that came with your gun.

Beretta Laser, Fits 92FS Pellet Pistol $31.19 Laser Fits Beretta 92FS pellet pistol Clamps under the barrel Screw mount On/off LED indicators Increase the accuracy of your Beretta 92FS CO2 pellet pistol with this laser. It slides on under the barrel and holds with clamping pressure (screws tighten the mount). Not suitable for the Beretta Elite II air pistol or any handgun that has an accessory rail under the barrel.

AirForce 12" Barrel, .177 Cal, Lothar Walther $145.2 12" choked Lothar Walther Barrel .177 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will decrease when attached to the Talon & Condor Extremely accurate! Can be used with the AirForce end cap (not included) on the Condor, which strips away turbulent air for a quieter report

AirForce 12" Barrel, .20 Cal, Lothar Walther $145.2 12" choked Lothar Walther Barrel .20 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will decrease when attached to the Talon & Condor Extremely accurate! Can be used on the Condor with the AirForce end cap (not included), which strips away turbulent air for a quieter report

AirForce 12" Barrel, .22 Cal, Lothar Walther $145.2 12" choked Lothar Walther Barrel .22 caliber Fits AirForce Talon, Talon SS & Condor guns Barrel switch is quick & easy…about 5 minutes! Velocities will decrease when attached to the Talon & Condor Extremely accurate! Can be used on the Condor with the AirForce end cap (not included), which strips away turbulent air for a quieter report

RWS Lock Down 1-Pc Mount w/1" Rings, 11mm Dovetail, Barrel Droop Compensation $33.54 1" rings Fits 11mm dovetail 2 hex screws per ring 4 hex screws secure base to scope rail 2 recoil stop pins .025" elevation compensates for barrel droop Made of aircraft-grade aluminum Includes hex wrench Black matte

RWS Lock Down 1-Pc Mount w/30mm Rings, 11mm Dovetail, Barrel Droop Compensation $33.54 30mm rings Fits 11mm dovetail 2 hex screws per ring 4 hex screws secure base to scope rail 2 recoil stop pins .025" elevation compensates for barrel droop Made of aircraft-grade aluminum Includes hex wrench Black matte

Laserlyte Mini Laser Bore Sight, Fits .17 to .22 Cal Guns $71.99 Laserlyte laser bore sight Fits .17 to .22 caliber guns (air rifles, air pistols and firearms) Requires minimum 3" barrel (the owner’s manual incorrectly states that you need a min. 4" barrel) 6061 T6 aluminum 650nm laser module Class IIIA laser 5mw power output Includes three 393 batteries 500-yd range at night 1.5 hrs battery life (constant on) Do not use on guns that have muzzlebrakes, silencers, fake silencers, shrouds or noise dampeners. Stop wasting time and ammo manually sighting-in targets. A Laserlyte mini laser bore sight will get your shots within 3 to 4 inches of the bullseye within a couple shots at 100 yards. Air rifles, air pistols and rimfires with at least a 3-inch barrel can use the Laserlyte mini laser bore sight. The batteries come installed in the bore sight.

Air Venturi Flash Suppressor, Fits AirForce Bounty Hunter Air Rifles, 1/2"x28tpi $23.94 Flash suppressor Fits AirForce Bounty Hunter air rifles 1/2"x28tpi (internal threads) AirForce Bounty Hunter air rifles come with our custom flash hiders. When we sell a Bounty Hunter rifle, we have to thread the barrel to fit the flash hider. If you already have a threaded barrel on your Bounty Hunter and need a different or spare flash hider, this will fit. If you’re ordering a Condor, Talon or Talon SS (or an extra AirForce barrel) at the same time and want us to thread the outside of your barrel (for a minimal fee), then click the "Add Service" button.

Umarex Compensator, Fits Hammerli 850, Walther 1250 Dominator & Beretta CX4 Rifles $47.99 Rifle compensator Fits RWS 850 AirMagnum, Walther 1250 Dominator (do not use on .25 cal gun) and Beretta CX4 Storm Friction fit Set screw secures compensator to barrel

Gamo Gun Buddy Rifle Sling, Fits All Air Rifles $15.59 Perfect for any air rifle Lightweight and durable Quick adjustment fasteners Non-slip pebbling Deluxe, shock-absorbing shoulder strap No sling swivels required! Front slips over barrel, back slips over buttpad

CenterPoint Laser Boresighter, .17 to .50 Cal Guns, Min. 3.8" Barrel Needed $42.3 CenterPoint red laser boresighter Fits .17 to .50 caliber guns Also compatible with 12-, 16- and 20-gauge shotguns Works with air rifles & air pistols with minimum 3.8-inch barrel 6 adapters 6.5"x0.5"x0.5" Includes batteries Do not use on guns that have muzzlebrakes, silencers, fake silencers, shrouds or noise dampeners. CenterPoint’s red laser boresighter is battery-powered and has 6 adapter fittings for .17 to .50 caliber gun (air rifles, air pistols, firearms & airsoft guns). It also fits 12-, 16- and 20-gauge shotguns. Stop wasting time and ammo manually sighting-in your targets!

Welman 11mm-to-Picatinny Drooper Rail, 16 MOA, Fits Air Arms S410/S510 Air Rifles $91.8 11mm-to-Picatinny (MIL-STD-1913) adapter Compensates for barrel droop 16 MOA @ 50 meters Fits Air Arms S410/S510 air rifles Hard-anodized aircraft-grade aluminum Secures to your air rifle’s 11mm rail with screws A hole in the mount allows access to the magazine assembly for any needed adjustments 105 grams (3.68 oz.) Any gun can have barrel droop. This 11mm-to-Picatinny (MIL-STD-1913) adapter fits Air Arms S410 and S510 air rifles and compensates for 16 MOA of droop at 50 meters. The mount was designed for the distances usually used by field target shooters…but it’ll work for any purpose you decided to use your air rifle. Does not fit S400 or S500 air rifles because the cutout for the loading port requires a different relief.

Welman 11mm-to-Picatinny Drooper Rail, 22 MOA, Fits Air Arms S410/S510 Air Rifles $91.8 11mm-to-Picatinny (MIL-STD-1913) adapter Compensates for barrel droop 22 MOA @ 100 meters Fits Air Arms S410/S510 air rifles Hard-anodized aircraft-grade aluminum Secures to your air rifle’s 11mm rail with screws A hole in the mount allows access to the magazine assembly for any needed adjustments 105 grams (3.68 oz.) Any gun can have barrel droop. This 11mm-to-Picatinny (MIL-STD-1913) adapter fits Air Arms S410 and S510 air rifles and compensates for 22 MOA of droop at 100 meters. The adapter was designed for people who shoot at longer distances. Does not fit S400 or S500 air rifles because the cutout for the loading port requires a different relief.

Mad Bull Gemtech G5 Barrel Extension, Black $75.54 Barrel extension Black For airsoft use

Mad Bull Gemtech Halo Barrel Extension $75.54 Barrel extension For airsoft use

UTG Scope Mount Base, Fits RWS Diana Rifles, Gamo Whisper & Others $21 Fits guns with the T05 trigger. In 2011, Diana introduced the T06 trigger and it also has a longer rail. This adapter does NOT fit the guns with a longer rail. Fits RWS Diana breakbarrel rifles that have no barrel droop Also fits Gamo rifles with a raised scope rail Attaches to rifle’s 11mm scope rail Special "recoil shock shoulder" stops scope shift–forever! Hide’s rifle’s 11mm scope rail; looks professional Scope base provides secure scope mounting with Weaver/Picatinny mounts 3 hex screws attach base to your Diana rifle Includes 2 hex wrenches Does not fit RWS Diana 46 or Schutze rifles

Umarex Barrel for Beretta CO2 .177 Pistol $23.99 Umarex barrel for beretta CO2 pistol (.177) Part number: 41940031

Air Venturi Ported Muzzlebrake, .579" Barrel Diameter $31.19 Ported muzzlebrake .579" barrel diameter

UTG Deluxe Tri-Rail Barrel Mount $11.94 Universal Tri-Rail Barrel Mount Complete with Laser Clamping Feature – Each Rail with 2 Slots.

Leapers Deluxe Shotgun Tri-Rail Barrel Mount $27.54 Shotgun Tri-Rail Barrel Mount Complete with Flashlight Clamping Feature – Each Rail with 5 Slots

Mad Bull Whisper .45ACP Fake Barrel Extension, Black $34.74 Fake barrel extension Counterclockwise thread Black The fake barrel extension attaches the the outer barrel with a counterclockwise thread and extends your gun’s inner barrel. Pick one up for your next skirmish! For airsoft use only.

Walther CP88 barrel 4" to 6" Blued $67.19 An interchangeable barrel sysem from 4" to 6". Barrel assembly for the CP 88 blued models. Increase your speed and accuracy with this accessory.

UTG Scope Mount Base, Fits RWS Diana 48, 52, 54 & 460 Magnum with TO5 Trigger, Compensates for Droop & Stops Scope Shift $22.74 We strongly recommend that you use a 2-piece Weaver scope mount that has 4 screws on each ring cap.

UTG Scope Mount Base, Fits RWS Diana 34, 36, 38, & 45 with TO5 Trigger, Compensates for Droop & Stops Scope Shift $22.74 We strongly recommend that you use a 2-piece Weaver scope mount that has 4 screws on each ring cap.

Mad Bull Gemtech Outback II Fake Silencer & Barrel Extension Tube $34.74 Fake silencer & barrel extension tube 14mm counterclockwise thread For airsoft use The fake silencer & barrel extension tube attaches to the outer barrel of your airsoft gun with a 14mm counterclockwise thread. For airsoft use only. ATTENTION: The fake silencer is just for looks and will not decrease the sound of your airsoft gun.

Walther CP88 barrel 4" to 6" Nickel $71.99 6" nickel plated barrel assembly for the CP 88 nickel plated models. Increase your speed and accuracy with this accessory.

S-Thunder BB Shower, Standard Barrel, Blue $71.99 BB shower shell For use with 40mm S-Thunder grenade launchers Compatible with all gas types Holds 80 BBs, 7 x 11mm paintballs or 4 x 17mm paintballs 20-30m effective range Standard barrel Blue 1.57" diameter 4.33" long 0.52 lbs This S-Thunder BB shower shell can be fired using any 40mm S-Thunder grenade launcher or be detonated by hand. You can fill this shell with paintballs, powder balls or BB pellets and operate it with any type of gas ranging from CO2 to green gas. This shower shell gives off a loud and satisfying 78-110dB explosion when triggered.

Smith & Wesson 586, 6-inch Barrel $295.14 10 Shots, Double-/Single-Action

Smith & Wesson 586, 4-inch Barrel $275.99 10-shot Repeater, Double-/Single-Action

939 UHC Revolver, 2.5 Barrel $32.34 Spring powered. Replica shells hold BBs.

UTG Low-Profile Dragon Claw Clamp-on Barrel Bipod $25.8 High Tech Durable Aluminum Construction Clever Adjustment Wheel for Wide Range of Barrel Sizes – 11mm to 19mm User Friendly Clamp-On Features Unique Posi-Lock Feature to Prevent Tipping Foldable with Fully Adjustable Center Height From 9" to 11"

Magazine, Clear, Fits R36 Rifle $9.54 Crosman magazine Clear plastic Fits R36 rifle Carry spare magazines to minimize reloading time during intense airsoft skirmish situations. This replacement magazine fits the Crosman R36 rifle exclusively.

JBU Fake Airsoft Suppressor, 6.75", Aluminum, Incl. Barrel Extension $71.99 JBU (MSS) modular supressor system Aluminum alloy material 14mm counterclockwise thread 5-pc set Unique JBU serial number 6.75"x1.5" This high-quality modular suppressor system by JBU will enhance the look of your airsoft gun. The modular suppressor system is made of aluminum alloy material for extra durability. The 5-piece set includes a barrel cap, forward extender, base extender, flash hider & adapter. Does not suppress the sound/noise of your gun. For airsoft use only.

Crosman 459MT 2-Pc Intermount, 3/8" Dovetail $12.54 Attaches to the barrel & provides a 3/8" dovetail Fits Crosman models 2240, 2250, 2260, 2289, 1322, 1377, 1740 & 1760 Includes 1 set, which is 2 intermounts

Walther CP88, Blued, 6 inch barrel $227.94 Black grips & compensator

Walther CP88, Nickel, 6 inch barrel $251.94 Black grips & compensator

Walther CP88, Nickel, 4 inch barrel $239.99 Black grips

HFC HG-132 4 Barrel Gas Revolver, Black $53.94 Adjustable Rear Sight, Semi-Auto

HFC HG-132 4 Barrel Gas Revolver, Silver $53.94 Adjustable Rear Sight, Semi-Auto

HFC HG-133 6 Barrel Gas Revolver, Black $53.94 Adjustable Rear Sight

HFC HG-133 6 Barrel Gas Revolver, Silver $53.94 Adjustable Rear Sight

939 UHC 2.5 inch barrel revolver, Silver $32.34 Spring powered. Replica shells hold BBs.

Beeman Carnivore Air Rifle, RS2 Trigger $251.99 3-9×32 Scope, Fluted Barrel

Beeman Elkhorn Air Rifle, RS2 Trigger $251.99 3-9x32AO Scope, Fluted Barrel

Gamo Shadow Sport $215.99 Bull barrel. Scope Included

Benjamin Marauder PCP Air Pistol $467.99 8-rd Repeater, Shrouded Barrel

Diana RWS 34P Pro Compact $321.3 Shorter barrel = easier handling

Diana RWS 350 Feuerkraft Pro Compact $515.4 Shorter barrel = easier handling!

Benjamin Katana Stock, Fits the Discovery $138 Benjamin Katana stock Fits the Benjamin Discovery Dual raised cheekpieces Slightly wider than the Discovery’s original stock Includes buttpad & replacement screw Give your Discovery a new look! This is the same stock that comes with the more expensive Benjamin Katana rifle, but you can now put it on your Disco. The raised cheekpieces will help align your eye with your scope or the open sights. Easy to install in minutes.

Front Sight, Fits Walther Lever Action Rifle $5.99 Front sight Fits Walther Lever Action CO2 rifle 1/2"L x 1/4"W x 1/4"H (including base)

Probe Adapter, Fits Shinsung & Sam Yang PCP Guns $9.59 Probe adapter fits Shinsung & Sam Yang PCP guns

Walther .25 Cal Rotary Clip, Fits 1250 Dominator $16.79 8-shot rotary clip .25 caliber Fits Walther 1250 Dominator

KWA Magazine Charging Valve, Fits KWA Gas Blowback Airsoft Pistols $5.99 Magazine charging valve Fits KWA gas blowback airsoft pistols

KWA Nozzle Seal, Fits KWA Gas Blowback Airsoft Pistol Magazines $5.99 Nozzle seal Fits KWA gas blowback airsoft pistol magazines: M17/M18C/M19/M23F/M26C/M34

KWA Replacement Cylinder, Fits KWA ATP Gas Blowback Airsoft Pistols $10.79 Replacement cylinder Fits KWA ATP gas blowback airsoft pistols

Umarex Elite Force 1911A1 CO2 Airsoft Pistol $119.94 Full Metal , Blowback , Threaded Barrel

Gamo Shadow Sport with Nitro Piston $347.98 Bull Barrel, 3-9×40 Scope & Mount

Gamo Varmint Hunter Stalker Air Rifle $251.99 Dampener, Bull Barrel, Scope, Laser

Gamo Varmint Hunter with Nitro Piston $299.99 Gas Spring Rifle with Bull Barrel

Hammerli Nova $359.99 Fixed Barrel and Spring Lock Loading

Crosman Recon Airsoft Kit, Brown/Black $71.99 Short-barrel gun with a pistol grip

Echo 1 MTC 1 AEG Airsoft Rifle, Black $251.99 Modular tactical carbine, short barrel

Falcon Airguns Prairie Falcon Profile Rifle $1151.99 Shrouded Bull Barrel, 8-rd Clip

Falcon Airguns Prairie Falcon Sporter Rifle $1031.99 Shrouded Bull Barrel, 8-rd Clip

Socom Gear Gemtech Oasis Gas Airsoft Pistol $96 Non-Blowback, Extended Outer Barrel

Tactical Force Combat CO2 Blowback pistol $71.94 Metal slide & barrel, Double Action

Tactical Force Combat CO2 pistol, LE Blue $71.94 Metal slide & barrel, Double Action

Crosman Stinger S32P Pump Airsoft Shotgun $35.94 Short-barrel gun with a pistol grip

AirForce Shoulder Stock, Fits TalonP Air Pistol $79.8 Shoulder stock Fits AirForce TalonP air pistol Adds 1/4" to 3/3" to length of pull Includes a hex wrench A great accessory for your AirForce Airguns TalonP air pistol. Just add this shoulder stock to convert it to a great little carbine. While this is a solid piece of metal, it doesn’t add much weight to the gun. Easy to attach and remove, this add-on slides over the air tank. Tighten the screws, and you’re ready to go!

Bipod Rail, Fits UTG Master Sniper Rifle $10.74 Bipod rail Fits UTG Master Sniper rifle Steady your rifle for precise shooting during intense airsoft missions. This spare Weaver/Picatinny bipod rail by UTG attaches underneath the foregrip of your rifle and lets you attach a bipod. Pick one up for your next airsoft skirmish! ATTENTION: The mounting screws no longer come with the bipod rail.

UTG Zytel Clamp-on Bipod $9.54 One Year Warranty Made of durable Zytel. Extremely light weight – only 6oz. Clamps around barrel and fits most guns. Folds to be carried in your pocket or bag. Very sturdy and affordable. Best valued economic solution for your practical need. Use on airsoft guns, airguns & firearms.

S-Thunder Pistol Grip Long Barrel Grenade Launcher $71.94 For M203 / 40mm Gas Powered Grenades

Walther CP88, Nickel, 6 inch barrel, CO2 Pistol $347.4 Wood grips & compensator

JBU Tight Bore 6.03mm Barrel – AK Series, 455mm, 17.9in $33.54 Hard Anodized, aluminum construction. Should increase FPS by 10-20 without additional modifications.

JB Unicorn 6.01mm Barrel – AK Series, 455mm, 17.9in $45.54 Hard Anodized, aluminum construction. Compatible with AK series

JB Unicorn 6.03mm Barrel – Mod16A3 Series, 509mm, 20.0in $33.54 Hard Anodized, aluminum construction. Should increase FPS by 10-20 without additional modifications.

JB Unicorn Tight Bore 6.03mm Barrel – Mod4 Series, 363mm, 14.29in $35.94 Hard Anodized, aluminum construction. Should increase FPS by 10-20 without additional modifications.

WE P08 Metal Gas 4 inch barrel, Silver $155.94 Full metal gas blowback pistol

Smith & Wesson Interchangeable Barrel System for the 686, 6", Nickel $80.64 With the purchase of additional barrels for your S & W 686 you can improve your accuracy and projectile speed with the longer barrels, and have the flexibility of changing to accommodate a shorter shooting distance.

Walther CP88, Nickel, 4 inch barrel, CO2 Pistol $323.99 Wood grips

Walther CP88, Blued, 4 inch barrel, CO2 Pistol $287.99 Wood grips

Walther CP88, Blued, 4 inch barrel, CO2 pistol $211.19 Black grips

Walther CP88, Blued, 6 inch Barrel, CO2 Pistol $323.99 Wood grips & compensator

UHC 939 2.5 inch barrel revolver, Silver/Black $32.34 Spring-powered. Replica shells hold BBs.

WE P08 Metal Gas 4 inch barrel airsoft pistol $113.94 Full metal gas blowback pistol

WE P08 Metal Gas 6 inch barrel airsoft pistol $119.94 Full metal gas blowback pistol

Colt M203 Grenade, Fits Colt M203 Grenade Launcher, 18 Rds $45.54 Colt M203 grenade Fits M203 grenade launcher Launches 18 BBs at once Reusable

Cybergun Drum Mag, Fits Most AEG AK47, Metal, 2500 rds $70.74 2250-round drum mag Fits most AK47 AEGs Metal shell Requires 3 AA batteries (NOT included)

Cybergun Weaver/Picatinny Mount, Fits FAMAS AEG Machine Gun $13.14 Weaver optics base with Picatinny slots Fits FAMAS AEG machine gun (CG400902)

Hammerli .177 Cal Rotary Clip, Fits 850 AirMagnum & 1250 Dominator $19.19 8-shot rotary clip .177 caliber Fits Hammerli 850 AirMagnum & Walther 1250 Dominator

Hammerli .22 Cal Rotary Clip, Fits 850 AirMagnum & 1250 Dominator $19.19 8-shot rotary clip .22 caliber Fits Hammerli 850 AirMagnum & Walther 1250 Dominator

UTG Magazine, Fits UTG Sport U988 1911 Spring Airsoft Pistols $5.51 UTG magazine Fits UTG Sport U988 1911 spring airsoft pistols (item # LESOFT-U988BH)

RAM A-Series Paintball Rifle Magazine, Fits 47 & 74 Rifles $54 RAM A-series magazine, fits 47 & 74 rifles 23-rd mag Uses cases (not included)

RAM S-Series Paintball Rifle Magazine, Fits 11S & 13S, Black $54 RAM S-series magazine, fits 11S & 13S rifles 20-rd mag Uses cases (not included) Black

Globe Front Sight & Inserts, Fits Weihrauch & Beeman HW Air Rifles $83.99 Globe front sight 5 sight inserts Fits Weihrauch & Beeman HW air rifles Never let a lost insert spoil your shooting again! The globe front sight & inserts make it easy to take your shot in any lighting condition. Fits Beeman HW and Weihrauch air rifles.

Crosman 1399 Custom Shoulder Stock, Fits Many Crosman Pistols $31.14 Shoulder stock Easy to install, no machining req’d Fits these current models: 1377C, 2250, 2240, 2300, BP2220, PC77, 2300KT and 2400KT Fits these discontinued models: 105, 111, 130, 150, 151, 1300, 1322 and SSP250 The ultimate in versatility! Change your pistol into a carbine by attaching this lightweight, synthetic thumbhole shoulder stock.

AirForce DIN Fill System, Fits AirForce Talon & Condor Rifles $78.6 AirForce Airguns DIN adapter Fits AirForce Talon & Condor airguns Fits any scuba tank with a DIN fitting If your scuba tank comes with a DIN fitting, get this and start filling your Talon and Condor PCP guns!

909 Big Bore Probe Adapter, Fits older 909 rifles only $9.59 Probe adapter fits older Sam Yang 909 rifles. It is 1/8" BSPP male on one end and a female thread pattern on the other end, which fits the older 909 probe. It attaches to a hose that ends in a 1/8" BSPP female fitting. We suggest using Teflon tape to connect this probe to an adapter.

Micrometer Rear Sight, Fits Weihrauch & Beeman HW Air Rifles $59.94 Micrometer rear sight Adj. for windage & elevation Fits Weihrauch & Beeman HW air rifles This Weihrauch micrometer rear sight fits Weihrauch and Beeman HW air rifles. If you’ve lost your original rear sight or need to replace one, get this.

ARH Piston Seal, Fits Webley Patriot And Beeman Kodiak Air Rifles $26.7 ARH piston seal Fits Webley Patriot & Beeman Kodiak air rifles If your piston seal is worn or cut, this is the proper replacement part.

Smith & Wesson Weaver Rail, Fits 586 & 686 Airguns $23.94 Weaver rail Attaches with 2 screws on top of the gun Fits S&W 586 & 686 CO2 revolvers ideal for attaching scopes, red dots & lasers

B-Square Weaver Base, Fits RWS C225 Pistol $40.74 Weaver scope base Fits RWS C225 CO2 pistol Attaches with 1 hex screw (wrench included) Allows access to change rotary clip

Gamo Express EXP20 Shotshells, Fits Viper & Shadow Express Shotguns $9 EXP20 .22 cal. shotshell Fits Gamo Viper Express & Shadow Express air shotguns Delivers 17-grain payload of #9 shot

Replacement Probe, Fits Older AR6 & Renegade PCP Airguns $23.06 Probe for filling air reservoir Fits Evanix AR6 Hunting Master rifle and pistol & Renegade rifle Fits older models Does NOT fit any other Evanix rifle or pistol (Blizzard, carbines, Speed, Conqest, Max, etc.) Own an older AR6 or Renegade? The newer models use a longer probe. This probe fits the earlier models, which require a shorter air fill probe. Get the right probe for your air gun.

Walther Accessory Rail, Fits Walther PPQ Air Pistol $20.39 Walther accessory rail Fits Walther PPQ air pistol Mount a scope or dot sight on your Walther PPQ air pistol and home in on your target.

Air Arms Degassing Tool, Fits Air Arms S200 Air Rifles $21.54 Degassing tool Fits S200 air rifles Need to get rid of the high-pressure air in your Air Arms S200 air reservoir? This degassing tool will help you do it safely and quickly.

Feinwerkbau Sliding Weight, 2 Rods, Fits P44 Air Pistols $71.99 Sliding weight with 2 rods 60 grams Fits P44 air pistols (including the P44 short) Need extra weight? Get these 60-gram sliding weights with rods for your FWB P44 air pistol.

Centra Rear Sight, Adjustable Aperture, Fits 3/8" or 11mm Dovetail $522.58 Centra rear sight Peep (aperture) sight Precision adjustments for windage & elevation Fits 3/8" or 11mm dovetail Superior quality, superior sight! Attaches with hex screws Incl. Allen wrench and manual

Airforce Edge Extra Air Tank, Fits Airforce Edge Air Rifles $164.34 Airforce Edge air tank Fits Airforce Edge air rifles Easily, quickly swap tanks on your Edge by loosening one screw in the buttstock assembly.

Creedmoor Sports Open Finger Shooting Glove, Fits Left Hand, Large $53.47 Left-hand glove for right-handed shooters Creedmoor Sports open finger shooting glove Cross slot on the back for better flexibility Meets ISSF and NRA rules Fits the left hand Large

Creedmoor Sports Open Finger Shooting Glove, Fits Left Hand, Medium $53.47 Left-hand glove for right-handed shooters Creedmoor Sports open finger shooting glove Cross slot on the back for better flexibility Meets ISSF and NRA rules Fits the left hand Medium

Creedmoor Sports Open Finger Shooting Glove, Fits Right Hand, Large $53.47 Right-hand glove for left-handed shooters Creedmoor Sports open finger shooting glove Cross slot on the back for better flexibility Meets ISSF and NRA rules Fits the right hand Large

Creedmoor Sports Open Finger Shooting Glove, Fits Right Hand, Medium $53.47 Right-hand glove for left-handed shooters Creedmoor Sports open finger shooting glove Cross slot on the back for better flexibility Meets ISSF and NRA rules Fits the right hand Medium

Walther Flanger Main Valve, Fits Walther Lever Action Air Rifles $21.54 Flanger main valve Fits Walther Lever Action air rifles You may need one of these to repair your Walther Lever Action air rifle!

Walther Bridge Mount, Fits Walther CP99 & CP Sport Pistols $35.99 Bridge mount Fits Walther CP99 & CP Sport CO2 guns Mount a scope or red dot on your gun This is an 11mm dovetail! To mount Walther’s optics, you’ll need their Weaver rail, which attaches to the 11mm dovetail on this bridge mount.

UTG Claw Mount, Fits Echo1 Sub Guns $29.94 Limited Lifetime Warranty New Gen claw mount with double Picatinny rails and STANAG spec Creative 1-piece integral Picatinny double rails. Accepts scopes, tactical flashlights and lasers.

AirForce End Cap, Fits Talon SS or Condor $17.94 AirForce end cap Comes standard on Talon SS Use with 12" barrels in .177, .20 or .22 caliber Strips away turbulent air for quieter report Note: Condor report cannot be reduced to the same degree as the Talon SS

Competition Electronics Debris Shield, Fits ProChrono Chronographs $21.59 Debris shield Clear Lexan cover Covers the front & top of any ProChrono chronograph Incl. guide wires to secure shield Accidents happen, so be proactive and protect the display and top of your ProChrono digital chronograph with this Lexan debris shield.

Competition Electronics Digital Remote, Fits ProChrono Chronographs $83.99 Digital remote Works with all ProChrono digital chronographs Connects to Windows computers via the serial port Download shot velocities and statistics to your PC via HyperTerminal in Windows* Powered by a 9V alkaline battery (not included) For use with Prochrono digital chronographs Incl. 20-ft cable to extend the remote to your shooting bench To determine if your computer can hook up to the remote unit, read the owner’s manual available on this page *You can use this with Macintosh or Linux computers, but you’ll need to get a terminal program specifically designed to use with those operating systems. Can you see your chronograph’s display from your shooting bench? If not, then this remote unit will close the distance by bringing the display to you.

Air Arms Cocking Aid, Fits TX200 $19.19 Cocking aid for TX200 Makes it easier to grasp the underlever Quickly, easily attaches; no machining required

Degassing Tool, Fits Benjamin Marauder Air Rifle $17.7 Degassing tool Removes air or CO2 from the Marauder’s reservoir Fit the Benjamin Marauder rifle (does not fit the Marauder pistol) If you need to release air from an overfilled Benjamin Marauder PCP rifle, the degassing tool will make the process a snap. Please refer to your air rifle’s manual for detailed use instructions.

Shooting Chrony Remote, Fits Beta & Gamma Chronys $26.34 Remote control switch has 2 buttons to operate all the functions on your Beta & Gamma Chronys. Just insert one plug into the left side of your Chrony and other into the bottom of your remote & you’re good to go!

Shooting Chrony Remote, Fits F-1 & Alpha Chronys $21.54 Corded remote makes it easier to turn things on & off. Just insert one end of the plug into the left side of the Chrony and the other plug into the bottom of the remote & you’re good to go! It also turns your F1 Chrony into an Alpha Chrony, giving you these added features/benefits: 1 string of 32 shots High and low velocities Average velocity Extreme spread Standard deviation

Hawke Sport Optics Bubble Level, Fits 9-11mm Dovetails $20.39 Bubble level Fits 9mm to 11mm dovetails Helps you level your gun & scope for maximum accuracy If your gun isn’t as accurate as you think it should be, attach this bubble level and watch where the bubble sits when you’re ready to shoot. If it’s not plumb center, that might be the cause of your problems.

Feinwerkbau Compressed Air Cylinder, Fits P44 Air Pistol $323.99 Compressed air cylinder Fits P44 air pistol Does NOT fit the P44 short Instead of toting fill devices for your FWB P44 air pistol, just fill your tank at home. No pumping, no hoses…just screw in and start shooting. This does not fit the P44 short air pistol.

Eun Jin Check Valve Assembly, Fits Sumatra Air Rifle $23.94 Check valve assembly Fits Sumatra air rifle Original replacement part from Eun Jin Most people don’t need a new check valve assembly for their Eun Jin Sumatra air rifle. But, if you do, use this one. It’s made by Eun Jin, the original manufacturer.

Eun Jin Cocking Lever Screw, Fits 909S Air Rifle $2.34 Cocking lever screw Fits 909S air rifle Original replacement part Did you lose the cocking lever screw on your Sam Yang 909S air rifle? Replace it with this one made by Eun Jin, a subsidiary of Sam Yang.

Eun Jin Fill Port Assembly, Fits Sumatra Air Rifle $21.54 Fill port assembly Fits Sumatra air rifle Original replacement part from Eun Jin Did you damage the fill port on your Sumatra air rifle? Replace it with this one made by Eun Jin, the original manufacturer.

Hammerli Pneuma Extra Air Tank, Also Fits HaleStorm & AT44PA Rifles $131.99 Don’t carry a scuba tank or pump when you go hunting or plinking! Carry an extra tank that you filled up at home! It’s lighter than fill devices and will let you keep shooting instead of filling. Fits the Hammerli Pneuma, Air Venturi HaleStorm and Hatsan AT44PA air rifles.

KWA KM4A1 Magazine, Fits KWA KM4A1 AEG Rifles, 350 Rds $29.88 KM4A1 rifle magazine Fits KWA KM4A1 AEG rifles 350 rds Own a KWA KM4A1 airsoft rifle? This high-capacity 350 rd magazine by KWA lets you concentrate on your battlefield targets without worrying about constantly reloading. Pick up this spare magazine today!

Air Venturi Thumbhole Stock, Fits Older AirForce Rifles & Tanks $47.99 Thumbhole stock Fits older AirForce Airguns Condor, Talon & Talon SS rifles & tanks* Easily attaches to gun’s pistol grip & high-pressure air tank buttplate (does not fit CO2 tank) No machining required *Does not fit the newer AirForce guns or tanks with the Spin-Loc feature.

Mag, .177 Cal, 10rds, Fits HaleStorm, Pneuma, BS65SB & AT44PA Rifles $16.79 .177 caliber 10rd mag Fits Hammerli Pneuma, Air Venturi HaleStorm, and Hatsan AT44PA and BS65SB rifles Leave the rattling pellet tins at home! Load up several mags before you go out to the field and spend your time shooting, not reloading.

Mag, .22 Cal, 10rds, Fits HaleStorm, Pneuma, BS65SB & AT44PA Rifles $16.79 .22 caliber 10rd mag Fits Hammerli Pneuma, Air Venturi HaleStorm, and Hatsan ATPA44 and BS65SB rifles Leave the rattling pellet tins at home! Load up several mags before you go out to the field and spend your time shooting, not reloading.

Air Arms Air Tank, Fits S200/T200 Air Rifles with Removable Tanks $143.94 Air tank Fits Air Arms S200/T200 air rifles with removable tanks If your Air Arms S200/T200 air rifle has a removable tank, this extra tank will be real convenient. Instead of carrying a pump or scuba tank plus the fill adapters, just fill up another tank and take it with you.

Gamo Gun Sock, Cotton & Spandex, Fits Most Long Guns $8.34 Gamo gun sock Stretchy cotton and spandex Helps guard against dirt, dust, scratches and rust Lightweight & durable Gamo logo One size fits most long guns Gun socks are your first line of defense against damage. Put these on your firearms, air guns and airsoft guns.

ASG Magazine, Fits STI Duty One BB Pistols $11.94 Magazine Fits STI Duty One CO2 BB pistol Holds 20 steel BBs Carry some preloaded spare mags for your air pistol so you can shoot more without interruption.

Benjamin CO2 Fill Adapter, Fits Discovery, Marauder & Challenger $43.19 CO2 fill adapter Fits Benjamin Discovery & Marauder and Crosman Challenger C GA-320 fitting with .825×1/4 thread, 8" stainless steel hose, female Foster fitting Use with CO2 paintball tanks Do not use for filling gun with pressurized air

Piston Seal, Fits Gamo Whisper & Gamo Big Cat $13.14 Piston seal Fits Gamo Big Cat 1200 or 1250 and Gamo Whisper (all models) Sometimes, seals in your spring-piston air rifle need to be replaced due to a variety issues. If you need a replacement for your Gamo Big Cat or Gamo Whisper air gun, this is the correct part!

Piston Seal, Fits Walther Falcon Hunter & Walther Talon Magnum $13.14 Piston seal Fits Walther Falcon Hunter and Walther Talon Magnum Spare part for either Walther spring-piston air rifle. Sometimes, gun blow seals or the seals are cut due to becoming dislodged. This is the correct replacement part for your air gun.

BKL 12-Way Folding Scope Level, Fits 30mm dia. Scope Tube $39.9 12-way scope bubble level Fits 30mm dia. scope tube Easy installation Eliminate cant with BKL’s 12-way scope bubble level. Position the level above, below or off to the side depending on your needs. Reference the level before taking your shot, reposition your gun so it’s level and then shoot. You should see a difference in accuracy, as a canted gun is not accurate. Included ring fits any 30mm scope tube. BKL’s patented Auto-Centering design overcomes problems caused by varying dovetail or rail widths.

Multi-Shot Combat Tactical Shotgun $71.99 3 BBs Each Shot, Triple Barrel System

Gamo Varmint Hunter $179.99 Scope & torch light w/ Bull Barrel

SIG Sauer P226 X5 Sport IPSC CO2 Full-Metal Pistol $119.99 Airsoft GBB, X-mount & Barrel Extension

Gamo Varmint Stalker Air Rifle $235.19 Noise Dampener, Bull Barrel, 4×32 Scope

Gamo Varmint Stalker Deluxe Air Rifle $239.99 Noise Dampener, Bull Barrel, 4×32 Scope

ECHO 1 Long M203 Airsoft Grenade Launcher, M4/M16 Series $119.99 Echo 1 grenade launcher 3 mounting systems: R.I.S., monobloc & barrel for standard M4 Marui-type Metal barrel, barrel track, release lever, trigger, safety, triggerguard & barrel attachment rings

Multi-Shot Combat Commando Shotgun $65.94 3 BBs Each Shot, Triple Barrel System

Air Venturi Intermount, Fits Benjamin Sheridan Multi-Pump Rifles $33.59 If you mounted a pistol scope on your Benjamin multi-pump but wanted to mount a rifle scope, now you can! Get this kit & mount a rifle scope in minutes! Custom-machined intermount & Picatinny rail Fits Benjamin Sheridan multi-pump rifles Easily slips on the receiver, spanning the pellet-loading area Mounts back far enough to accommodate a rifle scope 2-piece intermount mounts on receiver & included Picatinny rail attaches to the intermount Attach scope rings to the Picatinny rail Includes 2-piece aluminum intermount, 2 steel screws and Picatinny rail Scope & rings not included Fits Benjamin Sheridan multi-pumps with rounded receivers measuring .540" to .565" in diameter.

KWA H&K AEG Magazine, Fits G36C Airsoft Rifles, 430 Rds $27.54 KWA H&K AEG magazine Fits G36C airsoft rifles, AEG only Not compatable with dual power G36C 430 rds Spare magazines are essential for extended airsoft skirmishes. This high-capacity 430 rd magazine by KWA is great to carry in the battlefield. Pick up one for your G36C airsoft rifle today!

Target Shooters Hand Stop, Fits 10-Meter Rifles & Firearms $27.54 Hand stop Easily screws into the underside of your rifle’s forearm Can be used with 10-meter rifles* with appropriate screw holes in the forearm *Fits these air rifles: Air Arms MPR, Anschutz 9003, FWB 700, Daisy 887 Gold and Daisy 888 Medalist. Need a place to rest your hand when you shoot? Insert this hand stop and slide your hand forward to rest on it. An easy way to have a repeat hold while giving you extra support.

Benjamin Hand Pump, Fits Crosman & Benjamin PCP Guns $214.8 3-stage hand pump Made specifically for the Crosman/Benjamin PCP pistols & rifles (fits any brand of PCP gun with a male Foster quick-disconnect on its reservoir) Includes a female Foster quick-disconnect on the end of the pump hose Goes up to 3600 psi (although some of the guns listed above operate on a max pressure of 2000 or 3,000 psi) With other hoses, pump can be adapted to other PCPs Requires less effort than other pumps Integral air pressure gauge Moisture filter

Air Venturi 9.6V Battery, Fits Evanix Speed, Conquest & Max Airguns $35.99 8-cell battery pack 9.6 volts 5 hrs to fully charge Fits Evanix Speed, Conquest and Max air guns The Evanix 9mm Conquest air rifle uses an 8-cell 9.6V battery pack. This spare battery pack is shipped uncharged. You can also use this battery with your Speed or Conquest air rifles; in cold weather, it provides improved performance over the stock 7-cell 8.4V battery pack.

Replacement Air Reservoir, Fits Feinwerkbau P700 Air Rifles $387.46 Feinwerkbau replacement air reservoir Built-in manometer (air pressure gauge) 2900 psi max air pressure (200 bar) Fits all Feinwerkbau P700 PCP air rifles Instead of carrying a bulky fill tank or a hand pump, take along a spare air reservoir. Fill it up before your match and avoid lugging extra baggage. Same high-quality construction as the original tank that came with your FWB P700 air rifle.

Smith & Wesson Magnum Series Yellow Lens Safety Glasses, Fits Kids $9.59 Fits kids! The Magnum Series safety glasses are ergonomically dimensioned for a 3 point fit, the ultimate in comfort. Reduced size for smaller adults and youth. Comes in a Black Frame with Yellow Lens. Exceeds ANSI Z87.1 safety standards Provides maximum UV protection Ergonomic nose pad w/ self-adjusting rubber fingers Built-in hinge stops Polycarbonate safety glasses protect your eyes from impact, but the glasses deteriorate due to scratches, light, etc., and should be replaced after 2 years.

AirForce Quick-Detach Air Tank, Fits TalonP Air Pistols $159.6 Quick-detach air tank Fits TalonP air pistols Can be used with compressed air or dry nitrogen gas only 6.125" long Need some extra air? Don’t carry refill equipment! Get a spare tank, fill it up at home & take it with you. Simply swap the filled tank for the empty one, and you’re good to go.

Leapers Model 4/15 Scope Mount, Fits Carry Handle $21.54 Weaver mount Fits Model 4/15 carry handle 1" rings 3 adjustable mounting positions for flexible eye relief positioning Flattop adapter with 2 thumbscrews & clamping plate 4 screws per ring cap Made of aircraft-grade aluminum Tight tolerances create a solid fit for extreme tactical environments

Concealed Ankle Holster, Fits Compact & Subcompact Pistols, Black $11.94 UTG concealed ankle holster Fits compact & sub-compact pistols Padded polyester won’t mar gun’s finish Padded wraparound ankle & calf straps adjust with hook-and-loop close Thumb break 0.4 lbs Black Although this is made for concealed carry for firearms, airsoft shooters can also use this UTG ankle holster. If you’re captured during a skirmish, you can keep a hidden airsoft sidearm in this holster for a surprise attack behind enemy lines.

1911A1 S 8rd Blank Mag, Fits Colt & S&W Blank Pistols $16.79 8-rd mag Fits Colt Government 1911A1 S & S&W 1911 S blank guns Holds 9mm PAK blank ammo only Use only blank ammo Use only in the indicated blank-firing gun Will not accept live ammo rounds Will not properly feed any type of ammo in a firearm

BSA Single-Shot Adapter, .177 Cal, Fits R-10, Scorpion, Ultra $41.99 Single-shot adapter .177 cal Fits BSA R-10, Scorpion and Ultra air rifles If you prefer to shoot your BSA repeating air rifle as a single-shot, this adapter is what you need. Many airgunners prefer single-shots because they feel it gives them better control. Also, single-shot guns tend to be more accurate than repeaters.

BSA Single-Shot Adapter, .22 Cal, Fits R-10, Scorpion, Ultra $41.99 Single-shot adapter .22 cal Fits BSA R-10, Scorpion and Ultra air rifles Your BSA multi-shot air rifle can be shot with single pellets if you prefer. Just pop in this adapter, load a pellet and you’re off! Some airgunners feel that single-shot air guns offer better accuracy. Try it both ways and see what works best for you.

Umarex Universal Tactical Laser, Fits Weaver/Picatinny Accessory Rail $20.34 Umarex universal tactical laser Class IIIA laser Fits any Weaver/Picatinny accessory rail 650nm wavelength

Competition Electronics Replacement Diffuser Pack, Fits ProChrono Chronographs $13.14 ProChrono replacement diffuser pack 4 replacement guide wires 2 replacement diffuser hoods Fits all ProChrono chronographs No matter how careful you are, you may have shot the diffuser hoods or guide wires on your ProChrono chronograph. No worries…get this replacement pack, and you’re good to go. Use with air guns, firearms and airsoft guns.

AirForce CO2 Adapter, Fits Condor, Talon & Talon SS $119.94 Fits all Condor, Talon and Talon SS rifles Over 1,000 shots per CO2 tank Ideal for shooting indoors Easy to switch back to air No handpump or scuba tank required Quieter operation How to switch from high-pressure air to CO2: Unscrew your AirForce air tank from your rifle Screw in the CO2 adapter into your rifle Screw in the filled tank into the other end of the adapter Start shooting!

Walther Weaver Rail, Fits Walther CP99 & CP Sport Pistols $13.14 Weaver rail for Walther CP99 or CP Sport CO2 pistols For mounting pistol scopes & dot sights Includes Allen wrench & all mounting items To mount a scope or dot sight on a Walther CP99 or CP Sport, you’ll also need the Walther Bridge Mount

Concealed Belt Holster, Fits Compact & Subcompact Pistols, Black $9.54 UTG concealed belt holster Fits compact & sub-compact pistols Padded polyester won’t mar gun’s finish Front arch design to easily reholster Elastic thumb break Clip slips over belt/waistband 0.2 lbs Black 6.75" deep 3.5" wide tapers to 2.3" For concealed carry for firearms. Also useful for airsoft shooters who want to conceal an airsoft pistol during skirmishes. Clip this onto your belt to stow a spare sidearm the other side can’t see!

Competition Electronics Indoor Lighting System, Fits ProChrono Chronographs $71.99 Indoor lighting system Fits all ProChrono digital chronographs Provides optimum performance indoors or in low light Portable & fast setup Patented electronic design eliminates the need for light bulbs Red LED "on" indicator lights 120V AC 60Hz adapter input 24V DC 200 mAh adapter output 200 mAh power consumption 120V AC adapter* included *Can also operate on a 24V DC power source, such as two 12V batteries wired in a series. Whether you shoot indoors or out, you’ll need this supplementary lighting kit at some time. It’s a good idea to have it on hand right from the start.

Foregrip, Low Profile, Lever Lock, Fits Weaver/Picatinny Rail $35.94 Leapers UTG foregrip Low profile Lever lock Fits any Weaver/Picatinny rail Quick-detach adj. lever Waterproof O-ring on end cap protects storage area Aircraft-grade aluminum alloy Folds and locks in 2 positions Spring-tensioned Posi-lock Easy installation 1.04 cu in storage space 4.6" high 9.7 oz. Incl. hex wrench Attach this Leapers foregrip to any airgun, firearm or airsoft gun that has a Weaver/Picatinny rail. Secure it in seconds. Folds out of the way when you don’t need it. Sturdy, durable, useful.

Air Venturi CO2 Bulk-Fill Adapter, Fits Umarex EBOS $23.99 Air Venturi CO2 bulk-fill adapter Fits Umarex EBOS Screw the adapter into the CO2 port of the EBOS With the adapter securely attached, screw a paintball CO2 bulk-fill tank (12 oz. recommended) into the adapter (see note below) Extremely economical…more shots, less money EBOS buttstock cannot be attached when you use this bulk-fill CO2 adapter NOTE: The paintball tank valve will immediately open when it’s completely screwed into the adapter. Make sure the adapter is tightly/securely installed in the gun before the tank is tightened down.

Crosman Nitro Piston Conversion, Fits Many Newer Gamo Rifles $131.99 Pyramyd Air MUST install the Nitro Piston in your gun. It cannot be sold for customer installation. You will be charged shipping during the checkout process. That’s the charge to send your gun back to you after installation. Send your airgun to: Crosman Nitro Piston Installation 18370 S. Miles Road Warrensville Heights, OH 44128 The perfect upgrade for your Gamo Whisper air rifle. Crosman Nitro Piston conversion Fits Gamo Whisper-series, Hunter Sport, Varmint Hunter, Big Cat & Shadow Sport made in 2010 or later! Maintains same velocity as the metal spring Smoother cocking Smoother shooting No spring torque No spring fatigue, even if you leave it cocked for hours Functions perfectly in cold weather Lasts longer than a metal spring Installation is included in the price! All internal parts removed for this conversion will be sent back with your gun

Competition Electronics Digital USB Interface, Fits ProChrono Chronographs $89.99 Digital USB interface Fits all ProChrono digital chronographs Works with Windows 98, Windows 2000, Windows XP, Windows Vista & Windows 7 operating systems Measure velocities from multiple ProChrono digital chronographs with one PC Control panel handles all chronograph functions Read velocities from each shot string Calculate ammo, power factor & ft-lbs Export shot data & statistics to CSV and other delimited formats for use in spreadsheet programs On-screen graph of velocity strings Uses a USB computer port for a wired connection to the chronograph Computer keyboard is necessary but the mouse is optional Incl. USB adapter interface, 25-ft connection cable & program CD What a great way to string together several chronographs to quickly gather data! Especially useful for matches where maximum velocities are enforced, such as field target events.

Crosman Pistol Magazine, Fits Crosman C41 BB Pistol, .177 Cal, 18 Rds $10.74 Crosman C41 pistol magazine Fits Crosman C41 BB pistol Holds 18 steel BBs (not airsoft BBs) 1 per pack Fits the Crosman C41 BB pistol. Does not fit the C41 airsoft pistol.

Crosman Nitro Piston Conversion, Fits Many Older Gamo Rifles $131.99 Pyramyd Air MUST install the Crosman Nitro Piston in your gun. It cannot be sold for customer installation. You will be charged shipping during the checkout process. That’s the charge to send your gun back to you after installation. Send your airgun to: Crosman Nitro Piston Installation 18370 S. Miles Road Warrensville Heights, OH 44128 The perfect upgrade for your Gamo air rifle. Crosman Nitro Piston conversion Fits Gamo Whisper-series, Hunter Sport, Varmint Hunter, Big Cat & Shadow Sport made in 2009 or earlier and the Tech Force 89 and 99 air rifles Maintains same velocity as the metal spring Smoother cocking Smoother shooting No spring torque No spring fatigue, even if you leave it cocked for hours Functions perfectly in cold weather Lasts longer than a metal spring Installation is included in the price! All internal parts removed for this conversion will be sent back with your gun Remove the buzz, twang and vibration from your spring rifle. Gas springs are known for their reliability and durability.

AEG Airsoft Submachine Gun Magazine, Fits H&K MP5 A4 Airsoft Submachine Guns, 40 Rds $21.54 AEG submachine gun magazine Fits H&K MP5 A4 airsoft submachine guns 40 rds

Career Replacement Probe, 1/8 BSPP, Fits Shinsung/Career, Sumatra & Sam Yang Rifles $22.8 1/8 BSPP replacement probe Fits Shinsung/Career rifles, Eun Jin Sumatra rifles & Sam Yang rifles

Air Venturi Muzzle Protector, Fits AirForce Condor & Talon Bounty Hunter, 1/2"x28 TPI $15.59 Muzzle protector Fits AirForce Condor & Talon Bounty Hunter guns 1/2"x28 threads per inch

RAM R-Series Paintball Rifle Magazine, Fits 1R, 2R & 7R Rifles, Black $54 RAM R-series magazine, fits 1R, 2R & 7R rifles 20-rd mag Uses cases (not included) Black

RAM S-Series Paintball Rifle Magazine, Fits 11S & 13S, LE Blue $54 RAM S-series magazine, fits 11S & 13S rifles 20-rd mag Uses cases (not included) Law-enforcement blue

KWA Magazine Base Lock Seal, Fits KWA Gas Blowback Airsoft Pistol Magazines $5.75 Magazine base lock seal Fits KWA gas blowback airsoft pistol magazines: M17/M18C/M19/M23F/M26C/M34

Crosman B272 4-Pc Intermount, 3/8" Dovetail $17.94 Attaches to the barrel & provides a 3/8" dovetail Includes 1 set, which is 2 bases (each base has 2 sides that are screwed together) Black matte finish Fits current production Benjamin & Sheridan airguns Mounts so far forward that you’ll have to use a pistol scope to get the right eye relief. Do not grab any part of the scope when pumping your gun!

JBU Fake Airsoft Suppressor, 4.75", Aluminum $35.99 Fake supressor Aluminum alloy material 14mm counterclockwise thread JBU laser marking 4.75" long This fake suppressor by JBU fits the outer barrel on most airsoft guns with a 14mm counterclockwise thread. The fake suppressor is for looks only and will not actually decrease the sound of your airsoft gun. The fake suppressor features JBU laser markings and has a lightweight matte finish. For airsoft use only.

JBU Fake Airsoft Suppressor, 8.25", Aluminum $47.99 Fake supressor Aluminum alloy material 14mm counterclockwise thread JBU laser marking 8.25" long Enhance the look of your favorite airsoft gun with this high-quality fake suppressor by JBU! This 8.25" fake suppressor fits on the outer barrel of airsoft guns with a 14mm counterclockwise thread. The fake suppressor is made of durable aluminum alloy and has a matte finish. This fake suppressor does NOT decrease the sound of your airsoft gun. For airsoft use only.

Sig Sauer Pistol 12 Rds Magazine, Fits Sig Sauer P226 Spring Airsoft Pistol item # CG28114 $11.94 Sig Sauer pistol magazine Fits Sig Sauer P226 spring airsoft pistol Item#:CG28114 12 rds Own a Sig Sauer P226 pistol? This 12 rd replacement magazine fits the spring-powered P226 airsoft pistol exclusively. Carry this spare magazine for your next airsoft skirmish!

WE Green Gas Magazine, Fits WE SDWE35 Series Green Gas Airsoft Pistols, Silver $32.39 Green gas magazine Fits SDWE35 green gas airsoft pistols Silver Carry this spare magazine in the pouch of your tactical vest and minimize time spent reloading your gun. This silver clip fits WE SDWE35 green gas airsoft pistols exclusively.

Walther Scope Base, Fits Lever Action CO2 Rifle, 11mm Dovetail & Weaver $35.99 Fits Walther Lever Action CO2 rifle Attach either Weaver mounts or 11mm dovetail rings to this base Ideal for attaching a scope or dot sight

RAM R-Series Paintball Rifle Magazine, Fits 1R, 2R & 7R rifles, LE Blue $54 RAM R-series magazine, fits 1R, 2R & 7R rifles 20-rd mag Uses cases (not included) Law-enforcement blue

Evanix Replacement Probe, Fits Newer Evanix Renegade Carbine, Rainstorm, Blizzard, Speed & Max Air Guns $23.99 Probe for filling air reservoir Fits Evanix Renegade carbine (NOT the long gun), Rainstorm and Blizzard long guns, Speed rifle and Max bullpup Fits newer models only Does NOT fit Evanix Renegade long gun or any other gun except for those listed above Own a newer Evanix airgun that uses a probe to fill the reservoir? The newer models use a longer probe. This probe fits them.

AirForce Front Target Sight, Fits Most 10-Meter 3-Position Rifles + All AirForce Guns $46.8 Front target sight Fits most 10-meter 3-position rifles & all AirForce airguns Accepts standard European aperture inserts (not included) Large amount of vertical adjustment Made in America