Banjo Fitting

Bluegrass is just around an annual task to prepare the BBQ and Bluegrass Festival is the recovery of the signs of Aydelotte Farm, cleaning the year dust collected and published along streets leading to saline Creek Pioneer Village and Museum in 1600 Feazel the street.
Banjo Fingerpicks Part 1 – Types & Fitting

Quick-Disconnect Male Fitting + O-Ring $23.99 Male quick-disconnect fitting with o-ring Converts Sam Yang, Sumatra & Career rifles to connect to the Benjamin 3-stage hand pump Connects to female quick-disconnect (Quickadap1EM1B), which has 1/8 BSPP threads & fits most scuba tank & hand pump adapter hoses Installation instructions: To start the old fill port turning, insert the round shaft of a phillips screwdriver into the fill port hole and turn the port counterclockwise. Once the port loosens, you can take it off by hand the rest of the way. After you’ve unscrewed your old fill port from the end of your tank, thread in this quick-disconnect fitting & o-ring (included) to seal the connection. No need to depressurize the tank because the tank has a check valve.

Beeman HW 100 S FSB precharged pneumatic rifle $1739.94 Quick-disconnect fitting

Beeman HW 100 T FSB precharged pneumatic rifle $1764 Quick-disconnect fitting

AirForce DIN Fill System, Fits AirForce Talon & Condor Rifles $78.6 AirForce Airguns DIN adapter Fits AirForce Talon & Condor airguns Fits any scuba tank with a DIN fitting If your scuba tank comes with a DIN fitting, get this and start filling your Talon and Condor PCP guns!

Benjamin CO2 Fill Adapter, Fits Discovery, Marauder & Challenger $43.19 CO2 fill adapter Fits Benjamin Discovery & Marauder and Crosman Challenger C GA-320 fitting with .825×1/4 thread, 8" stainless steel hose, female Foster fitting Use with CO2 paintball tanks Do not use for filling gun with pressurized air

Benjamin CO2 & Air FIll Adapter, Fits Benjamin Air Tank or Standard Paintball CO2 Tank $83.99 Made specifically for the Dual Fuel capability of the Benjamin Discovery & Marauder and the Crosman Challenger. Includes: CGA-320 fitting for Benjamin carbon fiber tank or a standard paintball CO2 tank Fitting is .825×14 (standard paintball CO2 connector size) 7" stainless steel braided hose (12" overall length) Patented bleeder valve Female Foster quick-disconnect fitting

Airforce Refill Adapter, Quick-Disconnect Nipple $24 AirForce refill adapter Quick-disconnect nipple For filling your AirForce Talon and Condor rifles from any air source that has a female quick-disconnect fitting.

909 Big Bore Probe Adapter, Fits older 909 rifles only $9.59 Probe adapter fits older Sam Yang 909 rifles. It is 1/8" BSPP male on one end and a female thread pattern on the other end, which fits the older 909 probe. It attaches to a hose that ends in a 1/8" BSPP female fitting. We suggest using Teflon tape to connect this probe to an adapter.

Air Venturi Inline Air Pressure Gauge, 0 to 4500 psi $55.19 Inline air pressure gauge Measures up to 4500 psi Female quick-disconnect Male fitting If you use high-pressure fill devices for your precharged pneumatic guns and don’t have a pressure gauge on your fill device, this will do the job. The inline air pressure gauge fits the Air Venturi carbon fiber tank, AV-4500HPT.

Benjamin Scuba Yoke, DIN Valve $155.99 Benjamin scuba yoke Attaches to a scuba tank with a DIN valve Female quick-disconnect coupling on end of hose Includes air pressure gauge (manometer) Fits all Crosman & Benjamin PCP air rifles Fits other PCP guns that have a male quick-disconnect fitting No matter which Crosman or Benjamin precharged pneumatic air gun you own, this scuba yoke will connect your gun to a scuba tank with a DIN valve.

Benjamin Scuba Yoke, K-Valve $137.94 Benjamin scuba yoke Attaches to a scuba tank with a K-valve Female quick-disconnect coupling on end of hose Includes air pressure gauge (manometer) Fits all Crosman & Benjamin PCP air rifles Fits other PCP guns that have a male quick-disconnect fitting No matter which Crosman or Benjamin precharged pneumatic air gun you own, this scuba yoke will connect your gun to a scuba tank with a K-valve.

Airforce Braided Steel Hose, Quick-Disconnect, Fits Older Airforce Refill Clamp & Hand Pump $36 Braided steel hose Quick-disconnect fitting Fits older Airforce refill clamp with gauge (U1012) & older AirForce hand pump (U1014) To fill Talon/Condor rifles, use a refill adapter with quick-disconnect nipple (U1013) to attach the hose’s quick-disconnect This braided steel hose will stand up to many years of use without compromising its integrity. Strong, flexible, reliable…and safe. Current AirForce high-pressure fill devices come with a hose. The older pumps and scuba yokes did not come with a hose. If you have one of the older units and need to replace your hose, this is the item to get.

Be Sociable, Share!

•