
What is a good tank of Compressed Air to a base Proto Slg?
Proto SLG I have a base, I have to get a tank of compressed air to it. No I'm sure what kind of tank to buy or anything, so we need ur help. Must be under $ 50 and 48ci 3000psi.
All 48ci 3000 psi tanks are almost the same, just get one. They go for about $ 35-40. Time ANSGear.com, ActionVillage.com or a local paintball shop.
Scuba Diving Lessons : How to Use an Air Tank in Scuba Diving
|
|
Air Arms MPR Air Tank, Built-in Gauge $171.52 MPR air tank Built-in air pressure gauge (manometer) |
|
|
Air Arms Air Tank, Fits S200/T200 Air Rifles with Removable Tanks $143.94 Air tank Fits Air Arms S200/T200 air rifles with removable tanks If your Air Arms S200/T200 air rifle has a removable tank, this extra tank will be real convenient. Instead of carrying a pump or scuba tank plus the fill adapters, just fill up another tank and take it with you. |
|
|
AirForce Extra Air Tank, Air or Nitrogen, Fits Talon & Talon SS $217.8 There’s nothing like an extra tank for air or nitrogen to keep the shooting fun going! Air tank includes metal buttplate. |
|
|
AirForce Spin-Loc Air Tank, Fits TalonP Air Pistols $188.1 Spin-Loc air tank Connects to an AirForce TalonP pistol without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings 6.125" long Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns. |
|
|
AirForce Quick-Detach Air Tank, Fits TalonP Air Pistols $159.6 Quick-detach air tank Fits TalonP air pistols Can be used with compressed air or dry nitrogen gas only 6.125" long Need some extra air? Don’t carry refill equipment! Get a spare tank, fill it up at home & take it with you. Simply swap the filled tank for the empty one, and you’re good to go. |
|
|
Air Venturi HP4500 Replacement Valve, Fits Carbon Fiber Tank $179.99 Replacement valve for Air Venturi AV-4500HPT, a carbon fiber tank. |
|
|
Airforce Edge Extra Air Tank, Fits Airforce Edge Air Rifles $164.34 Airforce Edge air tank Fits Airforce Edge air rifles Easily, quickly swap tanks on your Edge by loosening one screw in the buttstock assembly. |
|
|
AirForce Extra Air Tank, Air or Nitrogen, Hi-Flo Valve, for Condors $241.8 There’s nothing like an extra reservoir for air or nitrogen to keep the shooting fun going! Air tank includes metal buttplate. Up to 15 shots at full power. 30 – 40 shots at low power settings. Use only with the AirForce Condor in .20, .22 or .25 caliber. Not recommended for .177 cal. Condors. |
|
|
Benjamin Air Tank, 2000 psi Output $191.99 Benjamin air tank Designed for high-pressure air up to 3000 psi Regulated to 2000 psi output (specifically for the Benjamin Discovery & Marauder and the Crosman Challenger) 72 cubic inches Fills a 2000 psi rifle 6 to 8 times from one tankful To fill the Discovery, Marauder or Challenger, you’ll also need FAH002 (Dual Fuel adapter) Do not use this tank with paintball guns Includes male quick-disconnect coupling (can be filled with the Benjamin hand pump) 4.5" outside dia., 11.5" long, 4.40 lbs. |
|
|
Hammerli Pneuma Extra Air Tank, Also Fits HaleStorm & AT44PA Rifles $131.99 Don’t carry a scuba tank or pump when you go hunting or plinking! Carry an extra tank that you filled up at home! It’s lighter than fill devices and will let you keep shooting instead of filling. Fits the Hammerli Pneuma, Air Venturi HaleStorm and Hatsan AT44PA air rifles. |
|
|
Air Venturi Scuba Tank Adapter & Hose Assembly, Female Connector, Gauge $93.54 Scuba tank adapter Includes hose with female connector Fits both tall- and short-necked scuba tanks K-valve only (does not fit DIN valves Includes gauge Connect your scuba tank to your PCP air rifles and air pistols and fill ‘er up! |
|
|
BSA R-10 PCP Air Rifle $1199.99 Compensator, Shrouded, Removable Tank |
|
|
Air Venturi Scuba Tank Adapter $65.99 "Scuba Yoke" Fill Station |
|
|
AirForce Extra Air Tank, Air or Nitrogen, Hi-Flo Valve, Use with .177 Cal Condor $241.8 There’s nothing like an extra reservoir for air or nitrogen to keep the shooting fun going! Air tank includes metal buttplate. Up to 15 shots at full power. 30 – 40 shots at low power settings. Use only with .177 caliber Condor |
|
|
Benjamin CO2 & Air FIll Adapter, Fits Benjamin Air Tank or Standard Paintball CO2 Tank $83.99 Made specifically for the Dual Fuel capability of the Benjamin Discovery & Marauder and the Crosman Challenger. Includes: CGA-320 fitting for Benjamin carbon fiber tank or a standard paintball CO2 tank Fitting is .825×14 (standard paintball CO2 connector size) 7" stainless steel braided hose (12" overall length) Patented bleeder valve Female Foster quick-disconnect fitting |
|
|
Air Venturi Tank Adapter Assembly, 4500 psi, for High-Pressure SCBA Tanks $105 Tank adapter assembly Fits high-pressure scba (self-contained breathing apparatus) tank, including the Air Venturi carbon fiber tank 4500 psi Includes bleeder, hose and female quick-disconnect coupling Does not include a manometer (air pressure gauge) Fits the Air Venturi carbon fiber tank–AV-4500HPT [PY-A-350]. Inline manometer (air pressure gauge) sold separately–AV-00031 [PY-A-3865]. Suitable for connecting your high-pressure scba tank to a precharged pneumatic air rifle. |
|
|
AirForce Spin-Loc Hi-Flo Air Tank, Fits .177 AirForce Condor Rifles $270 Spin-Loc Hi-Flo air tank Connects to .177-caliber* AirForce Condor rifles without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted** to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *The Condor’s Hi-Flo tank is caliber-specific. **To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns. |
|
|
Airforce Edge Spare Tank & Buttstock Assembly, Fits Airforce Edge Air Rifles $204.3 Airforce Edge tank & buttstock assembly Fits Airforce Edge air rifles The Edge Spare Tank with Buttstock assembly provides complete back up for the big match or an extended shooting session. |
|
|
AirForce Spin-Loc Standard Air Tank, Fits AirForce Talon & Talon SS Rifles $246.6 Spin-Loc standard air tank Connects to an AirForce Talon/Talon SS rifle without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns. |
|
|
AirForce Spin-Loc Micro-Meter Air Tank, Fits AirForce Sporting Rifles $246.6 Spin-Loc Micro-Meter air tank Connects to an AirForce Talon/Talon SS or Condor rifle without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings 10.875" long Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns. |
|
|
AirForce Condor CO2, 20-oz. CO2 tank, Scoped $815.94 1,000+ shots on one CO2 tank! |
|
|
AirForce Condor CO2, 12-oz. CO2 tank, Scoped $809.94 1,000+ shots on one CO2 tank! |
|
|
AirForce Spin-Loc Hi-Flo Air Tank, Fits .20, .22 & .25 AirForce Condor Rifles $270 Spin-Loc Hi-Flo air tank Connects to AirForce Condor rifles without having to remove the tank from the gun Built-in manometer (air pressure gauge) Uses standard quick-disconnect fittings Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank Does not fit .177-caliber guns. Use ONLY for .20-, .22- and .25-caliber Condors. The Spin-Loc air tank makes it much easier for you to refill your tank since you won’t have to remove it from your gun. Plus, switching to commonly used quick-disconnect fittings simplifies the whole process. The onboard pressure gauge lets you monitor how much air is left in the tank. No more guessing! *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns. |
|
|
Replacement Air Reservoir, Fits Feinwerkbau P700 Air Rifles $387.46 Feinwerkbau replacement air reservoir Built-in manometer (air pressure gauge) 2900 psi max air pressure (200 bar) Fits all Feinwerkbau P700 PCP air rifles Instead of carrying a bulky fill tank or a hand pump, take along a spare air reservoir. Fill it up before your match and avoid lugging extra baggage. Same high-quality construction as the original tank that came with your FWB P700 air rifle. |
|
|
Air Venturi Scuba Tank, 80 cu ft, Aluminum, Deluxe Valve, 3,000 psi, Black $239.99 Scuba tank K valve 80 cu ft Aluminum 3,000 psi maximum pressure (206 bar) Shipped empty Black Indicator shows if valve is open or closed If you shoot precharged pneumatic guns, you’ll need an air source. A scuba tank is a great way to store lots of air to pressurize all your guns. |
|
|
Feinwerkbau Compressed Air Cylinder, Fits P44 Air Pistol $323.99 Compressed air cylinder Fits P44 air pistol Does NOT fit the P44 short Instead of toting fill devices for your FWB P44 air pistol, just fill your tank at home. No pumping, no hoses…just screw in and start shooting. This does not fit the P44 short air pistol. |
|
|
Sam Yang Recluse Dual Tank Air Rifle $839.94 .357, Precharged Pneumatic |
|
|
Dragon Claw Dual Tank Air Rifle $839.94 .50 Cal., Precharged Pneumatic |
|
|
Leisure Pro Scuba Tank Accessory Kit $47.99 Accessory kit for Leisure Pro 80 cu ft scuba tank Includes black tank boot, yellow tank cover & yellow K-valve protector |
|
|
AirForce Talon SS CO2, Adapter, 12-oz. CO2 Tank $593.93 1,000+ shots on one CO2 tank! |
|
|
AirForce Condor CO2, Incl adapter, 12-oz. CO2 tank $713.94 1,000+ shots on one CO2 tank! |
|
|
AirForce Talon CO2, 12-oz. CO2 tank, 3-9×40 Scope $755.94 1,000+ shots on one CO2 tank! |
|
|
AirForce Condor CO2, Incl adapter, 20-oz. CO2 tank $719.94 1,000+ shots on one CO2 tank! |
|
|
AirForce Talon SS CO2, 12-oz. CO2 Tank, Scoped $755.94 1,000+ shots on one CO2 tank! |
|
|
AirForce Talon SS CO2, 20-oz. CO2 Tank, Scoped $755.94 1,000+ shots on one CO2 tank! |
|
|
AirForce Talon SS CO2, Adapter & 20-oz. CO2 Tank $599.94 1,000+ shots on one CO2 tank! |
|
|
AirForce Talon CO2, 20-oz. CO2 tank, 3-9×40 Scope $763.14 1,000+ shots on one CO2 tank! |
|
|
AirForce Talon CO2, Incl adapter, 12-oz. CO2 tank $563.94 1,000+ shots on one CO2 tank! |
|
|
AirForce Talon CO2, Incl adapter, 20-oz. CO2 tank $571.14 1,000+ shots on one CO2 tank! |
|
|
CO2 Tank, 12-oz., Refillable $23.99 CO2 tank 12 oz. Refillable Durable aluminum construction Pin-valve assembly included 2.5" diameter 10" total length |
|
|
Air Venturi Inline Air Pressure Gauge, 0 to 4500 psi $55.19 Inline air pressure gauge Measures up to 4500 psi Female quick-disconnect Male fitting If you use high-pressure fill devices for your precharged pneumatic guns and don’t have a pressure gauge on your fill device, this will do the job. The inline air pressure gauge fits the Air Venturi carbon fiber tank, AV-4500HPT. |
|
|
CO2 Tank, Filled, 12 oz., Refillable $29.99 CO2 tank (filled with CO2 by Pyramyd Air) 12 oz. Refillable Durable aluminum construction Pin-valve assembly included 2.5" diameter 10" total length |
|
|
CO2 Tank, Filled, 20 oz., Refillable $35.99 CO2 tank (filled with CO2 by Pyramyd Air) 20 oz. Refillable Durable aluminum construction Pin-valve assembly included 3.25" diameter 10.58" total length |
|
|
AirForce Micro-Meter Tank $217.8 Micro-meter tank Fits all AirForce rifles Delivers up to 100 shots Shoots at a reduced velocity (600 fps) Includes metal buttplate Ideal for low to mid-level velocities Perfect for indoor shooting! Delivers consistent shots that are naturally quieter due to lower velocities |
|
|
CO2 Tank, 20 oz., Refillable $31.19 CO2 tank 20 oz. Refillable Durable aluminum construction Pin-valve assembly included 3.25" diameter 10.58" total length |
|
|
Crosman AirSource, pre-filled, disposable, 88 gram CO2 tank $10.74 AirSource, the new, pre-filled, disposable, 88 gram (3.1 oz) CO2 tank has now been designed into a series of Crosman air rifles. AirSource not only allows more shots, up to 400 on one tank, but the accuracy and consistency is greater because of the larger reservoir of CO2. |
|
|
AirForce CO2 Adapter with Filled 12-oz. CO2 tank, fits Condor, Talon & Talon SS $143.94 Includes CO2 adapter & filled 12-oz. CO2 tank Fits AirForce Condor, Talon & Talon SS guns Over 1,000 shots per CO2 tank Ideal for shooting indoors Easy to switch back to air No handpump or scuba tank required Quieter operation Ground shipping only How to switch from high-pressure air to CO2: Unscrew your AirForce air tank from your rifle Screw in your CO2 adapter into your rifle Screw in the filled tank into the other end of the adapter Start shooting! When this tank is empty or down to a low level, fill up with more CO2 from a larger bulk-fill tank. This filled tank can be sent only by ground…no air shipping allowed! |
|
|
AirForce Shoulder Stock, Fits TalonP Air Pistol $79.8 Shoulder stock Fits AirForce TalonP air pistol Adds 1/4" to 3/3" to length of pull Includes a hex wrench A great accessory for your AirForce Airguns TalonP air pistol. Just add this shoulder stock to convert it to a great little carbine. While this is a solid piece of metal, it doesn’t add much weight to the gun. Easy to attach and remove, this add-on slides over the air tank. Tighten the screws, and you’re ready to go! |
|
|
Air Venturi Thread Converter + Hose $29.99 Hose + adapter for AirForce Airguns scuba tank & hand pump One end has 1/4 BSPP male threads to fit the female threads of the AirForce scuba tank adapter or AirForce hand pump The other end has 1/8 BSPP female threads & fits the hose with 1/8 BSPP male threads Hose ends in 1/8 BSPP female thread for use with 1/8 BSPP filling adapters or our female quick-disconnect coupling Includes flexible hose & 2 O-rings (wide rubber O-ring is used with AirForce 3-stage hand pump; bonded metal O-ring is used with AirForce scuba tank adapter) |
|
|
Air Venturi Thumbhole Stock, Fits Older AirForce Rifles & Tanks $47.99 Thumbhole stock Fits older AirForce Airguns Condor, Talon & Talon SS rifles & tanks* Easily attaches to gun’s pistol grip & high-pressure air tank buttplate (does not fit CO2 tank) No machining required *Does not fit the newer AirForce guns or tanks with the Spin-Loc feature. |
|
|
AirForce CO2 Adapter with Filled 20-oz. CO2 Tank, Fits Condor, Talon & Talon SS $151.19 Includes CO2 adapter & filled 20-oz. CO2 tank Fits AirForce Condor, Talon & Talon SS guns Over 1,000 shots per CO2 tank Ideal for shooting indoors Easy to switch back to air No handpump or scuba tank required Quieter operation Ground shipping only How to switch from high-pressure air to CO2: Unscrew your AirForce air tank from your rifle Screw in your CO2 adapter into your rifle Screw in the filled tank into the other end of the adapter Start shooting! Since this tank is filled with CO2, it has to be shipped via ground service. Start shooting when this arrives, and refill it from a bulk-fill CO2 tank. |
|
|
Air Venturi CO2 Bulk-Fill Adapter, Fits Umarex EBOS $23.99 Air Venturi CO2 bulk-fill adapter Fits Umarex EBOS Screw the adapter into the CO2 port of the EBOS With the adapter securely attached, screw a paintball CO2 bulk-fill tank (12 oz. recommended) into the adapter (see note below) Extremely economical…more shots, less money EBOS buttstock cannot be attached when you use this bulk-fill CO2 adapter NOTE: The paintball tank valve will immediately open when it’s completely screwed into the adapter. Make sure the adapter is tightly/securely installed in the gun before the tank is tightened down. |
|
|
Air Venturi IZH Drozd Bulk-Fill Adapter $59.94 No more small powerlets. This original adapter will accept any paintball bottles (click here for 12 oz or 20 oz). (Approx. 1300 shots with 20-oz. tank & approx. 780 shots with a 12-oz. tank) Turn your IZH Drozd into a real fun auto BB machine gun! To install this unit, you must modify the magazine by cutting a small slot in the cover plate. This does not prevent you from going back to 12-gram CO2 cartridges if you decide to use them. |
|
|
Carbon Fiber Tank, 4500 psi, 88 cu ft $839.99 DOT-approved Carbon fiber filament wound over aluminum bladder 88 cu ft 4500 psi max pressure 11.3 lbs dry weight Includes: Hose with 1/8" BSPP threads on both ends Seal washer Hose has an inline gauge (eliminates use of a yoke) Air Venturi female quick-disconnect adapter with 1/8" BSPP male threads on one end This is not a scuba tank. It’s a carbon fiber tank, which is also called an scba tank, and has a high-pressure scba valve…like the one firefighters use on their scba tanks. Many dive shops do not have the ability to fill these tanks. In some towns, the fire department has a compressor that can fill a high-pressure carbon fiber tank, as firefighters use smaller scba tanks for breathing equipment during rescues. You might want to approach your local fire department and ask if they would be willing to fill your high-pressure carbon fiber/scba tank from their compressor. Another alternative is to contact a local paintball store, as paintballers use carbon fiber tanks to fill their markers. If the only alternative you have is to fill your high-pressure carbon fiber scba tank at a dive shop, a 1/8" BSPP male to DIN female adapter (our part # AA-Z2128-300) can temporarily replace the hose on the valve adapter so the dive shop can fill your tank. |
|
|
Benjamin Carbon Fiber Tank, 90 cu in, Gauge, Hose w/Female Quick-Disconnect $479.99 Benjamin carbon fiber tank 90 cu in capacity 4,500 psi max pressure 15" long 12" microbore hose with female quick-disconnect Built-in air pressure gauge (manometer) Bleed valve Restricted-flow manifold for controlled, precise filling Lightweight, easier to transport than a metal scuba tank 4.625"x14.625" 4.6 lbs. Have you resorted to carrying a steel or aluminum buddy bottle to refill your PCP air guns in the field? You’ll get even more refills from this carbon fiber tank since it’s 4,500 psi. Plus, it doesn’t weigh as much. Depending on the size of your airgun’s onboard reservoir, you could get up to 16 fills before you have to refill this tank. |
|
|
Benjamin Carbon Fiber Tank, 54 cu ft, Gauge, Hose w/Female Quick-Disconnect $719.99 Benjamin carbon fiber tank 54 cu-ft capacity 4,500 psi max pressure 38" long 12" microbore hose with female quick-disconnect Built-in air pressure gauge (manometer) Bleed valve Restricted-flow manifold for controlled, precise filling Lightweight, easier to transport than a metal scuba tanks 4.625"x37" 15 lbs. This monster carbon fiber air tank will keep you in air for days, weeks…and probably months! Fill all your precharged pneumatic (PCP) air pistols and air rifles and shoot day and night. Depending on the size of your gun’s onboard reservoir, you’ll get up to 80 fills with this big boy. |
|
|
Crosman AirSource, pre-filled, disposable, 88 gram CO2 tank, 25ct BULK $197.94 Bulk AirSource Tanks Buy bulk rate CO2 at PyramydAir! 25 Tanks are included in this offer. Ideal for shooting clubs. AirSource, the new, pre-filled, disposable, 88 gram (3.1 oz) CO2 tank has now been designed into a series of Crosman air rifles. AirSource not only allows more shots, up to 400 on one tank, but the accuracy and consistency is greater because of the larger reservoir of CO2. |
|
|
Air Arms PCP Adapter, 1/8" BSPP Male to DIN Female $30 PCP adapter 1/8" BSPP male to DIN female For PCP guns that need a DIN connection to 1/8" BSPP hoses for pump or scuba tank adapters 300 bar max rating |
|
|
Air Venturi Steel Storm CO2 Bulk-Fill Adapter $59.99 Fits Umarex Steel Storm Eliminates need for disposable CO2 cartridges Go back to using disposable CO2 cartridges anytime No alterations are required! Easy to use, easy to attach Includes hose with bulk-fill CO2 tank connector, which connects to the gun’s CO2 inlet Bulk-fill CO2 tank NOT included No more small powerlets. This adapter accepts any paintball bottle (click here for 12 oz or 20 oz). Approx. 1300 shots with a 20-oz. tank & approx. 780 shots with a 12-oz. tank. With this setup, you’ll spend more time shooting and less time and money on 12-gram CO2 cartridges! Plug & play…absolutely no alterations are made to your Steel Storm! |
|
|
Leisure Pro Scuba Tank, K Valve, 80 cu ft, Aluminum, 3000 psi $299.99 Scuba tank K valve 80 cu ft Aluminum 3000 psi maximum pressure Shipped empty Yellow exterior color |
|
|
AirForce Scuba Tank Adapter K-valve, Steel Hose $102.6 AirForce Airguns scuba tank adapter K-valve Pressure gauge goes up to 3,000 psi Stainless steel mesh hose* Ends in a female quick-disconnect *While the hose is stainless steel mesh, it MAY also have a black plastic cover. Which one you get depends on what we have in stock. |
|
|
AirForce Scuba Tank Adapter, DIN Connector, Steel Hose $102.6 AirForce Airguns scuba tank adapter DIN connector Pressure gauge goes up to 3,000 psi Stainless steel mesh hose* Ends in a female quick-disconnect *While the hose is stainless steel mesh, it MAY also have a black plastic cover. Which one you get depends on what we have in stock. |
|
|
IZH Drozd BB – Bulk CO2 $395.99 Refillable 12-oz. or 20-oz. CO2 tank |
|
|
AirForce CO2 Adapter, Fits Condor, Talon & Talon SS $119.94 Fits all Condor, Talon and Talon SS rifles Over 1,000 shots per CO2 tank Ideal for shooting indoors Easy to switch back to air No handpump or scuba tank required Quieter operation How to switch from high-pressure air to CO2: Unscrew your AirForce air tank from your rifle Screw in the CO2 adapter into your rifle Screw in the filled tank into the other end of the adapter Start shooting! |
|
|
AirForce Striker Weight $11.94 If you want to convert an AirForce Airguns Talon or Talon SS air rifle to a Condor air rifle, you’ll need this striker weight, a Hi-Flo tank and a 24" barrel. |
|
|
Crosman AirSource, pre-filled, disposable, two 88 gram CO2 tanks $19.19 AirSource, the new, pre-filled, disposable, 88 gram CO2 tank has now been designed into a series of Crosman air rifles. AirSource not only allows more shots, up to 400 on one tank, but the accuracy and consistency is greater because of the larger reservoir of CO2. |
|
|
Benjamin Scuba Yoke, DIN Valve $155.99 Benjamin scuba yoke Attaches to a scuba tank with a DIN valve Female quick-disconnect coupling on end of hose Includes air pressure gauge (manometer) Fits all Crosman & Benjamin PCP air rifles Fits other PCP guns that have a male quick-disconnect fitting No matter which Crosman or Benjamin precharged pneumatic air gun you own, this scuba yoke will connect your gun to a scuba tank with a DIN valve. |
|
|
AirForce protective steel valve cap $18.3 Protect your airgun from the dust/dirt build up in the air flow valve! The new Bomb-Proof valve protector from AirForce Airguns protects the air valve on the tank from dirt or damage. Especially useful when transporting the rifle broken down for transport or for that spare tank you’re carrying out on an extended shooting session. Made from solid steel to last a lifetime, the new valve protector is another quality product from the makers of the worlds most advanced air gun shooting system |
|
|
Benjamin Scuba Yoke, K-Valve $137.94 Benjamin scuba yoke Attaches to a scuba tank with a K-valve Female quick-disconnect coupling on end of hose Includes air pressure gauge (manometer) Fits all Crosman & Benjamin PCP air rifles Fits other PCP guns that have a male quick-disconnect fitting No matter which Crosman or Benjamin precharged pneumatic air gun you own, this scuba yoke will connect your gun to a scuba tank with a K-valve. |
|
|
AirForce 1/4" male BSPP Adapter, For AirForce Guns $18.3 1/4" male BSPP adapter Connects your AirForce rifle to a scuba tank or hand pump |
|
|
CO2 Fill-Up $6 CO2 Fill-Up – gas. Please only add it to the shopping cart if you are purchasing a CO2 tank at the same time. |
|
|
AirForce DIN Fill System, Fits AirForce Talon & Condor Rifles $78.6 AirForce Airguns DIN adapter Fits AirForce Talon & Condor airguns Fits any scuba tank with a DIN fitting If your scuba tank comes with a DIN fitting, get this and start filling your Talon and Condor PCP guns! |
|
|
Phillips Pellet Holder for AirForce Talon & Condor Airguns, .177-.20 Cal, Holds 16 Rds, .250" Thick $12.6 Phillips Pellet Holder Holds .177 cal & .20 cal pellets 16 pellet slots Fits AirForce Talon & Condor airguns & Logun S-16 air rifle 3"x3.25" Velcro straps .250" pad thickness Wrap around gun’s tank or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun’s tank or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive. |
|
|
Phillips Pellet Holder for AirForce Talon & Condor Airguns, .177-.20 Cal, Holds 16 Rds, .325" Thick $12.6 Phillips Pellet Holder Holds .177 or .20 cal. pellets 16 pellet slots Fits AirForce Talon & Condor airguns & Logun S-16 air rifle 3"x3.25" .325" pad thickness Wrap around gun’s tank or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun’s tank or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive. |
|
|
Phillips Pellet Holder for AirForce Talon & Condor Airguns, .22-.25 Cal, Holds 16 Rds, .325" Thick $12.6 Phillips Pellet Holder Holds .22 cal & .25 cal pellets 16 pellet slots Fits AirForce Talon & Condor airguns & Logun S-16 air rifle 3"x3.25" Velcro straps .325" thick pad Wrap around gun’s tank or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun’s tank or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive. |
|
|
Phillips Pellet Holder for AirForce Talon & Condor Airguns, .22-.25 Cal, Holds 16 Rds, .425" Thick $12.6 Phillips Pellet Holder Holds .22 or .25 cal. pellets 16 pellet slots Fits AirForce Talon & Condor airguns & Logun S-16 air rifle 3"x3.25" Velcro straps .425" pad thickness Wrap around gun’s tank or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun’s tank or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive. |
|
|
Benjamin CO2 Fill Station, Use With CGA 320 Adapter $75 Benjamin CO2 fill station Attaches to common bulk-fill CO2 tanks Fill smaller refillable CO2 tanks Pin-valve depressor Fill control Vent knob Use with CGA 320 valve For Crosman & Benjamin guns that have refillable CO2 tanks If your Benjamin or Crosman gun has a refillable CO2 tank, get this fill station to save some money! Get a large CO2 tank, fill it and then attach this unit to the tank. You’ll also need an ASA adapter (CGA 320 valve) to attach from the fill station’s hose to the gun. Bulk-filling saves money, gives you more shots for your money and lets you spend more time shooting your air guns! |
|
|
Hill MK3 Hand Pump Dry-Pac Refill $9.54 Dry-Pac refill For Hill hand pumps that have a Dry-Pac unit Removes 90% of harmful moisture Replace every 4 months (every 2-3 months in warmer or more humid climates) Non-toxic Dry-Pac desiccant only Keep moisture out of your gun’s air reservoir! Moisture causes rust and can compromise the integrity of your tank. This is the medium that’s inside the Dry-Pac unit. |
|
|
Creedmoor Sports K Valve to 200 DIN Valve Adapter $59.98 K valve to 200 DIN valve adapter If your fill hose has a male 200 DIN thread connection and your scuba tank has a K valve, you’ll need this adapter. |
|
|
Quick-Disconnect Male Fitting + O-Ring $23.99 Male quick-disconnect fitting with o-ring Converts Sam Yang, Sumatra & Career rifles to connect to the Benjamin 3-stage hand pump Connects to female quick-disconnect (Quickadap1EM1B), which has 1/8 BSPP threads & fits most scuba tank & hand pump adapter hoses Installation instructions: To start the old fill port turning, insert the round shaft of a phillips screwdriver into the fill port hole and turn the port counterclockwise. Once the port loosens, you can take it off by hand the rest of the way. After you’ve unscrewed your old fill port from the end of your tank, thread in this quick-disconnect fitting & o-ring (included) to seal the connection. No need to depressurize the tank because the tank has a check valve. |
|
|
AirForce Scuba Refill Clamp with Gauge $78.6 Scuba yoke fill station 1/4" AirForce tank adapter Fits scuba tank with standard k-valve 1" diameter micro-gauge reads from 1-5,000 psi across one-third of the gauge face Product may not look exactly like the one shown. Universal! Fits long- & short-necked scuba tanks! |
|
|
Crosman Airsource CO2 Paintball Adapter $8.39 Paintball adapter Fits 88-gram AirSource CO2 tanks More convenient than a refillable tank This paintball adapter is compatible with Crosman 88-gram AirSource CO2 tanks. Simply attach the adapter to the paintball marker before you attach it to the cylinder. For paintball use only. |
|
|
Blackbird CO2 Bulk-fill Conversion Hose & Adapter $59.99 Fits IZH Drozd Blackbird Adapts Blackbird mag so it connects to a refillable CO2 tank in the stock Eliminates need for disposable CO2 cartridges Easy to convert back to disposable CO2 cartridges No alterations are required Easy to use, easy to attach |
|
|
Propane Adapter for Airsoft Green Gas Guns $22.74 The TSD Sapien Arms Ver2 Aluminum Propane Adaptor is an excellent, user friendly alternative for gas-powered airsoft products. This trendsetting adaptor features a thread-on cap with loop, silicone oil reservoir, and a texturized body for easy grip feel. The adaptor does not need to be to be detached from the propane tank to apply silicone oil. For airsoft use only. Light silicone oil not included. Users MUST use silicone oil with this product! |
|
|
Benjamin ASA Adapter, Connects Bulk CO2 Tanks to Benjamin Dual-Fuel Guns $21.59 ASA adapter Connects bulk-fill CO2 tanks to Benjamin & Crosman Dual-Fuel guns Screws into CO2 fill station or lever-fill station Includes o-ring & 1/8-inch threaded connection to attach to quick-disconnect fittings Connect your Crosman or Benjamin Dual-Fuel gun to a bulk-fill CO2 tank for more shots per fill. |
|
|
TSD Sapien Arms Propane Adapter, Plastic, .25 oz. Silicone Oil $13.14 Sapien Arms propane adapter High-strength ABS plastic Lubricates & cleans Enhances performance Easy-to-locate fluorescent green finish Revolutionary design with silicone oil reservoir Cap-retainer loop Does not need to be detached from propane tank to apply silicone oil Excellent alternative for gas airsoft products Includes .25 oz. light silicone oil For airsoft use only |
|
|
TSD Sapien Arms Ver2 Aluminum Propane Adapter, Blue $27 The TSD Sapien Arms Ver2 Aluminum Propane Adapter is an excellent, user friendly alternative for gas-powered airsoft products. This trendsetting adapter features a thread-on cap with loop, silicon oil reservoir, and a texturized body for easy grip feel. The adapter does not need to be to be detached from the propane tank to apply silicon oil. For airsoft use only. Light silicon oil not included. Users MUST use silicon oil with this product. |
|
|
TSD Sapien Arms Ver2 Aluminum Propane Adapter, Red $27 The TSD Sapien Arms Ver2 Aluminum Propane Adapter is an excellent, user friendly alternative for gas-powered airsoft products. This trendsetting adapter features a thread-on cap with loop, silicon oil reservoir, and a texturized body for easy grip feel. The adapter does not need to be to be detached from the propane tank to apply silicon oil. For airsoft use only. Light silicon oil not included. Users MUST use silicon oil with this product. |
|
|
TSD Sapien Arms Ver. 2 Aluminum Propane Adapter, Green $27 The TSD Sapien Arms Ver2 Aluminum Propane Adapter is an excellent, user friendly alternative for gas-powered airsoft products. This trendsetting adapter features a thread-on cap with loop, silicon oil reservoir, and a texturized body for easy grip feel. The adapter does not need to be to be detached from the propane tank to apply silicon oil. For airsoft use only. Light silicon oil not included. Users MUST use silicon oil with this product. |
|
|
Phillips Pellet Holder, Long, .177-.20 Cal, Holds 20 Rds, .325" Thick $12.6 Phillips Pellet Holder Holds .177 or .20 cal. pellets 20 pellet slots 2"x6.5" Velcro straps .325" pad thickness Wrap around gun’s tank or your wrist No more fumbling for the next pellet. Forget about rattling pellet tins while you hunt. Slap one of these on your gun or around your wrist, and you’re good to go. Load your next shot quickly with just one hand. No more pellet tins spilling in the field! Phillips Pelletholder is convenient, lightweight, easy to use and non-abrasive. |
|
|
Beeman P11 air pistol $623.94 A Beeman Air Pistol |
|
|
Weihrauch HW77 air rifle $719.94 Underlever Sporting Air Rifle |
|
|
Weihrauch HW30S Air Rifle $377.4 A Weihrauch Sporting Air Rifle |
|
|
Benjamin Marauder Air Rifle $563.96 Compressed Air or CO2, Repeater |
|
|
Air Arms Degassing Tool, Fits Air Arms S200 Air Rifles $21.54 Degassing tool Fits S200 air rifles Need to get rid of the high-pressure air in your Air Arms S200 air reservoir? This degassing tool will help you do it safely and quickly. |
|
|
Beeman R7 Air Rifle, No Sights $449.94 Beeman Sporting Air Rifle |
|
|
Beeman R9 Air Rifle, No Sights $563.94 A Beeman Sporting Air Rifle |
|
|
Beeman P3 Gold Air Pistol $287.94 Gold air pistol |
|
|
Beeman R11 MKII Air Rifle $815.94 Beeman Sporting Air Rifle |
|
|
Benjamin Discovery Air Rifle $311.94 Uses 2,000 PSI Air or CO2. Dual Fuel. |
|
|
Air Arms T200 Sporter Air Rifle, Target Sights $718.8 Sporter Class PCP Air Rifle |
|
|
Beeman HW77 MKII Carbine Air Rifle $751.19 A Beeman Sporting Air Rifle |
|
|
Beeman R1 Supermagnum Air Rifle, No Sights $737.1 Beeman Sporting Air Rifle |
|
|
Beeman R1 Supermagnum Air Rifle – 2008 CLOSEOUT $839.94 Beeman Sporting Air Rifle |
|
|
Air Arms S200 Hunter Air Rifle, Red Laminate Stock $959.99 Compact PCP Air Rifle, Scope & Mount |
|
|
Air Venturi Bronco Mainspring $8.34 Mainspring Fits Air Venturi Bronco Mainsprings can weaken due to leaving your spring-piston air gun cocked for an extended period of time. Springs can also break and bend. If you need to replace the mainspring in your Bronco air rifle, this is the one to get! |
|
|
Air Arms Bleeder Tool, Fits Air Arms S400 MPR Air Rifles $17.94 Air Arms bleeder tool Safely exhausts air from the reservoir Fits Air Arms S400 MPR air rifles If you need to remove any remaining air from your Air Arms S400 MPR air rifle’s reservoir, you’ll need this tool to do it. Works fast and does the job safely. |
|
|
Air Venturi Bronco air rifle $151.19 Designed by Tom Gaylord |
|
|
Air Arms MPR Internal Rail $30.71 MPR internal rail Attach Air Arms weights to rail |
|
|
2011 AirForce Condor PCP Air Rifle, Blue $703.14 Blue PCP Air rifle, No Spin-Loc Collar |
|
|
Air Gunner Digital Subscription $30 Packed with reviews, advice and hunting features from emerging experts in the field, Air Gunner covers every aspect of the sport and would suit novice and seasoned shooters alike. Each month there are in-depth gun tests, hunting features, product tests and a page dedicated to answering readers� questions. Click here to open a sample copy Special discount for Pyramyd Air customers! Enter PAAG1 into the �"Promotional code" box on the signup page and get up to $2.00 off. Get your Air Gunner DIGITAL subscription started TODAY by clicking here! Only 15 British Pounds for 1 year (12 issues), that’s less than $25 at the current exchange rate! Contents page from latest issue of Air Gunner: 6 Air Gunner News and Previews 17 Your letters 21 Competition 22 Airgun Guru 24 Going to the EXTREME 28 Country Smallholding 33 Bunny Business 36 ULTRA SHORT Review 40 The Big Test – Air Arms Pro-Sport 45 Airgun Collection 50 Calendar 53 Intelligent Hunting 55 Join BASA 57 Competing with GAS 62 GUN Smart 67 Snow Patrol 73 What NOT to Shoot 79 24-Carat Taipan 83 Wood As New 86 The NEW Diana Model 280 90 Shooting Comfort 97 Swap Shop |
|
|
Air Venturi Rear Sight, Micrometer Adjustable $35.99 Fits Air Arms MPR & Crosman Challenger Micrometer adjustments for windage & elevation |
|
|
Degassing Tool, Fits Benjamin Marauder Air Rifle $17.7 Degassing tool Removes air or CO2 from the Marauder’s reservoir Fit the Benjamin Marauder rifle (does not fit the Marauder pistol) If you need to release air from an overfilled Benjamin Marauder PCP rifle, the degassing tool will make the process a snap. Please refer to your air rifle’s manual for detailed use instructions. |
|
|
Air Venturi Bronco Target Pro Air Rifle $191.99 Designed by Tom Gaylord |
|
|
Air Arms S400 Biathlon Air Rifle $1559.99 Ambidextrous, White Poplar Stock, 5-Shot |
|
|
Air Arms TX200 MkIII air rifle $719.99 The Winningest Field Target Spring Gun! |
|
|
Air Arms S510 TC PCP Air Rifle $1679.99 Ambi Stock, Dual Raised Cheekpieces |
|
|
Air Arms S510 Thumbhole PCP Air Rifle $1511.99 Adj. Power, 10-Rd Repeater |
|
|
IZH 46M Air Pistol, LH or RH, Upgraded Trigger $611.99 IZH 46M Match Pistol, 10M Air Pistol |
|
|
2011 AirForce Talon SS PCP Air Rifle, Red $587.7 PCP Air Rifle, No Spin-Loc Collar |
|
|
Air Arms Fill Adapter, Fits Air Arms Rifles w/Detachable Tanks $35.94 Fill adapter Fits Air Arms airguns with removable tanks Connects to a female DIN thread If you’ve lost the fill adapter for your Air Arms airgun, here’s a replacement adapter. |
|
|
Daisy Air Rifle Sleeve, 40" Long $10.74 Daisy air rifle sleeve 40"x8.5" Fits smaller air rifles with or without scopes Fits most BB guns Web handles Full-length zipper for easy access Loop on muzzle end for hanging |
|
|
Air Venturi Impact Putty, 5 lbs $21.59 Cut to fit into the |
|
|
Air Arms S200 .177 Cal 10-Shot Magazine $47.94 .177 cal magazine for Air Arms S200 10-shot mag Fits S200 rifles that already have the 10-shot conversion kit installed! |
|
|
Beeman P1 Air Pistol $551.94 Overlever Spring-Piston, 1911 Lookalike |
|
|
IZH 53M Air pistol $79.14 Awesome 10-meter target pistol! |
|
|
Gamo Recon Air Rifle $95.94 Unique Thumbhole Design |
|
|
Air Venturi Fly Shooter $8.39 This gun rounds out the true hunter’s arsenal of weapons, as it targets one of the most obnoxious of all man’s enemies – the fly! Practical field testing has indicated that it is deadly on all species of flies within the effective range of its yard-long tether cord. Get several – everyone who sees them wants one. Great fun gifts! |
|
|
Ruger Air Hawk Combo $139.14 Includes 4×32 Scope |
|
|
Ruger LGR Air Rifle $155.94 CO2-Powered, Bolt-Action |
|
|
Weihrauch HW80 Air Rifle $707.94 Accurate and Powerful! |
|
|
Weihrauch HW95 Air Rifle $539.94 Rekord Trigger, Monte Carlo Stock |
|
|
Crosman 2100B Air Rifle $71.94 Multi-pump rifle shoots BBs and pellets |
|
|
Webley Patriot Air Rifle $407.99 Magnum Power, Quattro Trigger |
|
|
Air Arms S200 Sporter $695.99 Entry-Level PCP rifle! |
|
|
Air Arms S200 Target $719.99 Entry-Level PCP rifle w/Diopter Sight |
|
|
BSA Supersport Air Rifle $407.94 Beech Stock, Adjustable Trigger |
|
|
Marksman 2000K Air Pistol $37.9 Shooter’s Kit |
|
|
Webley Alecto Air Pistol $407.99 Multi-Pump Pneumatic |
|
|
Remington Vantage air rifle $143.99 Breakbarrel, 4×32 Scope |
|
|
Air Arms Pro-Sport $875.99 Perfect for field target! |
|
|
Air Arms TX200 HC $719.99 Hunter carbine |
|
|
Ruger Air Magnum Combo $203.94 Includes 4×32 Scope & Mount |
|
|
Gamo P-25 air pistol $95.99 CO2 Blowback pistol |
|
|
Browning Gold Air Rifle $311.99 Synthetic Stock, 3-9×40 Scope |
|
|
BSA Comet Air Rifle $389.06 Legendary BSA Accuracy |
|
|
BSA Polaris Air Rifle $431.99 Underlever, Legendary BSA Accuracy |
|
|
Beeman P5 air pistol $239.99 Perfect for recreational shooting |
|
|
Crosman 1088 Air Pistol $47.99 Shoots BBs or Pellets |
|
|
Crosman 2104X Air Rifle $83.99 Scoped Multi-Pump, Shoots BBs & Pellets |
|
|
Crosman Optimus Air Rifle $113.99 Fiber Optic Sights, Ambi Stock |
|
|
Crosman 1077 air rifle $71.94 Lightweight CO2 repeater |
|
|
Beeman HW97K air rifle $755.94 Underlever, Rekord Adjustable Trigger |
|
|
Dragon Claw Air Rifle $803.94 .50 Cal., Precharged Pneumatic |
|
|
Gamo Air Gun Oil $3.54 This is the recommended oil for your Gamo airgun. General purpose oil for all airguns. The dispenser has a fine tip for lubricating small areas and moving components. DO NOT USE IN SPRING PISTON CHAMBER. Always make sure your airgun is unloaded before cleaning or oiling. |
|
|
Browning Leverage Air Rifle $234.9 Underlever, Wood Stock, 3-9×40 Scope |
|
|
Gamo .177 Air Gun Cleaning Kit $23.99 Air rifle yoke (stand) Gamo airgun oil 25 felt cleaning pellets 25 cleaning patches 2-piece cleaning rod 1 patch loop 1 nylon brush Rod handle Protective cover The Gamo cleaning kit contains everything you need to clean and maintain your spring-piston air rifle or air pistol. The portable gun stand is light and easy to assemble. Take it from the shop to the range. Made of durable, easy-to-clean material. Sturdy enough to hold any adult airgun. |
|
|
Air Venturi .45 Cal, 166 Grains, Semiwadcutter, 50ct $21.54 .45 caliber (0.457) 166 grains Semiwadcutter 50ct Air Venturi ammo for your .45-cal. air rifle. Uniform in shape, these are perfect for big bore air guns. |
|
|
Air Venturi .45 Cal, 204 Grains, Flat Nose, 50ct $23.94 .45 caliber 204 grains Flat nose 50ct Looking for high-quality big bore ammo that’s uniform in size? Air Venturi .45-caliber bullets are made specifically for air rifles and air pistols. |
|
|
Air Arms MPR Palm Rest Kit, Fits S400 MPR Air Rifle $71.94 Palm rest kit Fits Air Arms S400 MPR 10-meter air rifle Includes palm shelf, hex wrench, washers, screws and 2 lengths of extenders Customize your Air Arms S400 MPR air rifle by adding a palm rest for a steadier hold. The extenders come in two lengths that will suit most shooters. Generally speaking, a palm rest will increase your accuracy. |
|
|
Welman 11mm-to-Picatinny Drooper Rail, 16 MOA, Fits Air Arms S410/S510 Air Rifles $91.8 11mm-to-Picatinny (MIL-STD-1913) adapter Compensates for barrel droop 16 MOA @ 50 meters Fits Air Arms S410/S510 air rifles Hard-anodized aircraft-grade aluminum Secures to your air rifle’s 11mm rail with screws A hole in the mount allows access to the magazine assembly for any needed adjustments 105 grams (3.68 oz.) Any gun can have barrel droop. This 11mm-to-Picatinny (MIL-STD-1913) adapter fits Air Arms S410 and S510 air rifles and compensates for 16 MOA of droop at 50 meters. The mount was designed for the distances usually used by field target shooters…but it’ll work for any purpose you decided to use your air rifle. Does not fit S400 or S500 air rifles because the cutout for the loading port requires a different relief. |
|
|
Air Venturi .45 Cal, 200 Grains, Flat Nose, 50ct $20.34 .45 caliber 200 grains Flat nose 50ct These Air Venturi big bore bullets are made in America specifically for air guns. |
|
|
Welman 11mm-to-Picatinny Drooper Rail, 22 MOA, Fits Air Arms S410/S510 Air Rifles $91.8 11mm-to-Picatinny (MIL-STD-1913) adapter Compensates for barrel droop 22 MOA @ 100 meters Fits Air Arms S410/S510 air rifles Hard-anodized aircraft-grade aluminum Secures to your air rifle’s 11mm rail with screws A hole in the mount allows access to the magazine assembly for any needed adjustments 105 grams (3.68 oz.) Any gun can have barrel droop. This 11mm-to-Picatinny (MIL-STD-1913) adapter fits Air Arms S410 and S510 air rifles and compensates for 22 MOA of droop at 100 meters. The adapter was designed for people who shoot at longer distances. Does not fit S400 or S500 air rifles because the cutout for the loading port requires a different relief. |
|
|
Pyramyd Air T-Shirt, Size 2XL, Grey $17.1 Show the world that you’re a smart consumer & buy from the largest airgun retailer in the world! A quality t-shirt with the Pyramyd Air logo on the front and our website address on the back. Short sleeves Size 2XL (adult) |
|
|
Pyramyd Air T-Shirt, Size 2XL, Heather $17.1 Show the world that you’re a smart consumer & buy from the largest airgun retailer in the world! A quality t-shirt with the Pyramyd Air logo on the front and our website address on the back. Short sleeves Size 2XL (adult) |
|
|
Pyramyd Air T-Shirt, Size 2XL, Navy $17.1 Show the world that you’re a smart consumer & buy from the largest airgun retailer in the world! A quality t-shirt with the Pyramyd Air logo on the front and our website address on the back. Short sleeves Size 2XL (adult) |
|
|
Pyramyd Air T-Shirt, Size Large, Grey $17.1 Show the world that you’re a smart consumer & buy from the largest airgun retailer in the world! A quality t-shirt with the Pyramyd Air logo on the front and our website address on the back. Short sleeves Size large (adult) |
|
|
Pyramyd Air T-Shirt, Size Large, Heather $17.1 Show the world that you’re a smart consumer & buy from the largest airgun retailer in the world! A quality t-shirt with the Pyramyd Air logo on the front and our website address on the back. Short sleeves Size large (adult) |
|
|
Pyramyd Air T-Shirt, Size Large, Navy $17.1 Show the world that you’re a smart consumer & buy from the largest airgun retailer in the world! A quality t-shirt with the Pyramyd Air logo on the front and our website address on the back. Short sleeves Size large (adult) |
|
|
Pyramyd Air T-Shirt, Size Medium, Grey $17.1 Show the world that you’re a smart consumer & buy from the largest airgun retailer in the world! A quality t-shirt with the Pyramyd Air logo on the front and our website address on the back. Short sleeves Size medium (adult) |
|
|
Pyramyd Air T-Shirt, Size Medium, Heather $17.1 Show the world that you’re a smart consumer & buy from the largest airgun retailer in the world! A quality t-shirt with the Pyramyd Air logo on the front and our website address on the back. Short sleeves Size medium (adult) |
|
|
Pyramyd Air T-Shirt, Size Medium, Navy $17.1 Show the world that you’re a smart consumer & buy from the largest airgun retailer in the world! A quality t-shirt with the Pyramyd Air logo on the front and our website address on the back. Short sleeves Size medium (adult) |
|
|
Pyramyd Air T-Shirt, Size Small, Grey $17.1 Show the world that you’re a smart consumer & buy from the largest airgun retailer in the world! A quality t-shirt with the Pyramyd Air logo on the front and our website address on the back. Short sleeves Size small (adult) |
|
|
Pyramyd Air T-Shirt, Size Small, Heather $17.1 Show the world that you’re a smart consumer & buy from the largest airgun retailer in the world! A quality t-shirt with the Pyramyd Air logo on the front and our website address on the back. Short sleeves Size small (adult) |
|
|
Pyramyd Air T-Shirt, Size Small, Navy $17.1 Show the world that you’re a smart consumer & buy from the largest airgun retailer in the world! A quality t-shirt with the Pyramyd Air logo on the front and our website address on the back. Short sleeves Size small (adult) |
|
|
Pyramyd Air T-Shirt, Size XL, Grey $17.1 Show the world that you’re a smart consumer & buy from the largest airgun retailer in the world! A quality t-shirt with the Pyramyd Air logo on the front and our website address on the back. Short sleeves Size XL (adult) |
|
|
Pyramyd Air T-Shirt, Size XL, Heather $17.1 Show the world that you’re a smart consumer & buy from the largest airgun retailer in the world! A quality t-shirt with the Pyramyd Air logo on the front and our website address on the back. Short sleeves Size XL (adult) |
|
|
Pyramyd Air T-Shirt, Size XL, Navy $17.1 Show the world that you’re a smart consumer & buy from the largest airgun retailer in the world! A quality t-shirt with the Pyramyd Air logo on the front and our website address on the back. Short sleeves Size XL (adult) |
|
|
Air Arms S200 .22 Cal 10-Shot Magazine $47.94 .22 cal magazine for Air Arms S200 10-shot mag Fits S200 rifles that already have the 10-shot conversion kit installed! |
|
|
Air Arms Walnut Stock, Right-Hand, fits S400, S410, S500, S510 Air Rifles $335.94 Air Arms Monte Carlo walnut stock Fits S400, S410, S500 & S510 air rifles Right-hand Ventilated rubber buttpad Checkered pistol grip and forearm Raised cheekpiece If you bought your Air Arms precharged pneumatic gun with a beech stock, you can upgrade it to this walnut beauty. Did you break or ding your walnut stock? This is the replacement that’ll make it right, again. |
|
|
Air Venturi A.G.E. Quiet Pellet Trap $89.94 Tired of having pellets and BBs scatter all over the house? The Quiet Pellet Trap ends that problem forever, because it’s loaded with 15 lbs. of ballistic putty that captures and holds your ammo. It’s great for outdoor use, too! The trap is suited to guns that produce less than 18 foot-pounds of energy at 10 meters. If you notice your ammo popping out of the trap, then it’s time to remove the pellets and BBs stuck in the putty. But, that won’t happen until you’ve shot a LOT of rounds. The frame of the trap is made of walnut-stained pine. It’s 13.5"Hx12.5"W. There’s a groove that accepts a target, such as the NRA official 10-meter 12-bull air rifle target. There’s also a target backer so you can attach any size target you like. Includes: Pellet trap, 15 lbs. of ballistic putty, 1 target backer and 4 NRA 12-bull targets. You can purchase extra accessories below: AGE impact (ballistic) putty (5 lbs) NRA official 10-meter 12-bull air rifle targets |
|
|
Air Venturi .45 Cal, 232 Grains, Round Nose, 50ct $23.94 .45 caliber (.454) 232 grains Round nose 50ct Consistent in quality and uniform in size, Air Venturi big bore airgun bullets are made specifically for air rifles and air pistols. These American-made projectiles are the highest-quality you can get. |
|
|
Air Venturi .50 Cal, 228 Grains, Hollowpoint, 50ct $23.94 .50 caliber 228 grains Hollowpoint 50ct If you hunt, you’ll want to get these Air Venturi hollowpoint bullets. At 228 grains, they’re heavy and will deliver real knockdown power to your prey. Like all Air Venturi bullets, these are made specifically for big bore air guns. |
|
|
Air Venturi .356 Cal, 105 Grains, Flat Nose, 100ct $23.46 .356 105 grains Flat nose 100ct High-quality lead bullets for your .357-cal. big bore air rifle. These air gun projectiles are made in America! |
|
|
Walther Accessory Rail, Fits Walther PPQ Air Pistol $20.39 Walther accessory rail Fits Walther PPQ air pistol Mount a scope or dot sight on your Walther PPQ air pistol and home in on your target. |
|
|
Air Venturi .45 Cal, 176 Grains, Semiwadcutter, 50ct $21.54 .45 caliber (.454) 176 grains Semiwadcutter 50ct Air Venturi ammo for your big bore air gun. Great for hunting or shooting targets. |
|
|
Feinwerkbau Sliding Weight, 2 Rods, Fits P44 Air Pistols $71.99 Sliding weight with 2 rods 60 grams Fits P44 air pistols (including the P44 short) Need extra weight? Get these 60-gram sliding weights with rods for your FWB P44 air pistol. |
|
|
Walther Flanger Main Valve, Fits Walther Lever Action Air Rifles $21.54 Flanger main valve Fits Walther Lever Action air rifles You may need one of these to repair your Walther Lever Action air rifle! |
|
|
Air Venturi Front Globe Sight, Accepts Inserts $11.94 Globe front sight Fits Air Arms MPR rifle & Crosman Challenger Attaches to front dovetail with 2 screws Accepts inserts (one is included) Great focus with a better sight delivers increased accuracy. This is about as good as it gets. And the price is much lower than many European front sights. |
|
|
Air Venturi Paracord Bracelet, XL, Desert Camo $9.59 Paracord bracelet XL Desert camo Made in USA Pick up this Air Venturi desert camo paracord bracelet for outdoor activities like hiking, camping & military exercises. The cord can be worn comfortably on your wrist and is a useful addition to any outdoor/survival gear. |
|
|
Air Venturi Paracord Bracelet, Large, Foliage Green $9.59 Paracord bracelet Large Foliage green Made in USA This Air Venturi paracord bracelet is a useful addition to any survival gear. Paracord bracelets were initially designed for use as a suspension line for parachutes but they can be used for a variety of outdoor activities like hiking, camping & military exercises. Pick one up today! |
|
|
Air Arms S510 Monte Carlo Stock, Poplar, Beech Stain, Ambidextrous $251.99 Air Arms S510 Monte Carlo stock Poplar with beech satin stain Ambidextrous (two raised cheekpieces) Uniquely checkered forearm & pistol grip Need a new stock for your Air Arms S510 air rifle? Remove it from its current stock and slip it into this one. Made by Air Arms, it’ll grace your gun as beautifully as the original. |
|
|
Air Venturi MP-5 Oil, Metalophilic, 4oz. $5.99 Metalophilic MP-5 oil Prevents rust & corrosion 4 oz Air Venturi Metalophilic MP-5oil penetrates the smallest crevices of your airgun and protects against corrosion and rust. This oil neutralizes sweat and salt and doesn’t trap moisture. This oil eventually dries into a non-gumming, lubricating film which lasts through almost indefinite storage. Extend the life of your airgun and pick up this rust inhibiting oil today! ATTENTION: Do NOT use Metalophilic MP-5 oil in the compression chamber of spring-piston airguns. |
|
|
Air Venturi Flash Suppressor, Fits AirForce Bounty Hunter Air Rifles, 1/2"x28tpi $23.94 Flash suppressor Fits AirForce Bounty Hunter air rifles 1/2"x28tpi (internal threads) AirForce Bounty Hunter air rifles come with our custom flash hiders. When we sell a Bounty Hunter rifle, we have to thread the barrel to fit the flash hider. If you already have a threaded barrel on your Bounty Hunter and need a different or spare flash hider, this will fit. If you’re ordering a Condor, Talon or Talon SS (or an extra AirForce barrel) at the same time and want us to thread the outside of your barrel (for a minimal fee), then click the "Add Service" button. |
|
|
Crosman 25 Air Rifle / Air Pistol paper targets $4.74 Official 25 ft. Qualification Target / Official 25 ft. Rapid Fire Pistol Target. Length: 7 inches Height: 9 inches The rifle target side has a 5 5/8 inch diameter You can use these in this Crosman pellet and BB trap. |
|
|
Air Arms S200 Hunter Air Rifle, 10-Shot Repeater $779.94 Ambidextrous Beech Stock |
|
|
Hoppe’s Air Rifle & Air Pistol Cleaning Kit, .17 Caliber $11.94 Hoppe’s airgun cleaning kit 3-piece steel rod with looped handle 2.25-oz. Hoppe’s 9 lubricating oil Brass jag .17-cal brass brush* Cleaning patches Gun care guide *The brush is .17 caliber. It will still work on your .177-caliber airguns. While airguns don’t require constant cleaning like firearms, there are times when they need to be cleaned to achieve maximum accuracy. Hoppe’s has a reputation for making high-quality gun oil and cleaning accessories. |
|
|
Air Arms S500 Xtra FAC Deluxe PCP Air Rifle $1079.99 High-Gloss Ambi Poplar Stock |
|
|
Air Arms S500 Xtra FAC PCP Air Rifle $1019.99 Hunter Green Ambi Stock, Single-Shot |
|
|
Air Arms S500 Xtra FAC Sidelever PCP Air Rifle $1019.99 Ambi Poplar Stock |